On the prediction of failure in metal sheets with special reference to strain path dependence

International Journal of Mechanical Sciences

Volumn 88, Issue , 2014, Pages 175-191

  Mattiasson, Kjell ^a,b   Jergéus, Johan ^b   Dubois, Paul ^c  

^a CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

^b VOLVO CAR CORPORATION   (Sweden)

^c Hermes Engineering   (Belgium)

Author keywords

Failure; Fracture; Necking; Path dependency; Sheet metal

Indexed keywords

COMPUTER SYSTEM RECOVERY; FORECASTING; SHEET METAL; FRACTURE;

AUTOMOTIVE CRASHES; FAILURE PREDICTION; NECKING; NECKING PHENOMENON; PATH DEPENDENCY; PLASTIC INSTABILITIES; PREDICTION OF FAILURES; PRINCIPAL STRAIN; STRAIN PATHS;

FRACTURE; COMPUTER SYSTEM RECOVERY;

EID: 84907362109     PISSN: 00207403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmecsci.2014.08.006     Document Type: Article

References (52)

1. Mattiasson K, Sigvant, M. On the influence of the yield locus shape in the simulation of sheet stretch forming. In: NUMISHEET 2005, AIP conference proceedings; 2005. p. 778. ISBN/ISSN: 0-7354-0265-5.
2. Mattiasson K, Sigvant M. On necking prediction in ductile metal sheets. In: Proceedings of ESAFORM 2006 - the 9th international conference on material forming, Juster, Rosochowski (editors.). Glasgow, UK; 2006. p. 335-8. ISBN/ISSN: 83-89541-66-1.
3. Mattiasson K, Sigvant M, Larsson M. Methods for forming limit prediction in ductile metal sheets. In: Proceedings of IDDRG'06, Santos, Barata da Rocha (editors.). Porto, Portugal; 2006. p. 1-9. ISBN/ISSN: 972-8953-06-2.
4. Mattiasson K, Sigvant M, Larsson M. Theoretical and experimental sheet metal failure valuation. In: Proceedings of IDDRG'07. Györ, Hungary; 2007. p. 185-94.
5. Mattiasson K, Sigvant M, Larsson M. On the prediction of plastic instability in metal sheets. In: Proceedings of NUMIFORM'07, AIP conference proceedings. Porto, Portugal: vol. 908; 2007. p. 129-34. ISBN/ISSN: 978-0-7354-0416-8.
6. Mattiasson K, Sigvant M, Larsson M. On the role of strain rate in FE-simulation of sheet forming processes. In: Proceedings of NUMISHEET 2008; 2008. p. 223-8. ISBN/ISSN: 978-3-909386-80-2.
7. Mattiasson K, Sigvant M, Larsson M. Issues in connection to the prediction of strain localisation in metal sheets. In: Proceedings of the 11th international ESAFORM conference on material forming. Lyon, France; 2008.
8. PF Thomson, and PU. Nayak An experimental investigation into the development of thickness non-uniformities leading to failure in sheet steel J Mech Work Technol 4 1980 223 232
9. Korhonen AS Manninen T Kanervo K. On necking, fracture and localisation of plastic flow in austenitic steel sheets. In: Proceedings of NUMIFORM'07, AIP conference proceedings, vol. 908. Porto, Portugal; 2007. p. 93-8. ISBN/ISSN: 978-0-7354-0416-8.
10. Korhonen AS, Manninen T. Forming and fracture criteria for austenitic stainless steel sheets. In: Proceedings of NUMISHEET 2008; 2008. p. 311-4. ISBN/ISSN: 978-3-909386-80-2.
11. A Reyes, O Hopperstad, T Berstad, and O-G. Lademo Prediction of necking for two aluminum alloys under non-proportional loading by using an FE-based approach Int J Mater Form 11 2008 211 232
12. Reyes A, Hopperstad OS, Berstad T, Lademo O-G. Forming limit diagrams with an FE-based approach for sheets under non-proportional loading. In: Proceedings of the 7th European LS-DYNA conference. Salzburg; 2009.
13. Zeng D, Xia Z, Shih H, Shi M. Development of shear fracture criterion for dual-phase steel stamping. SAE technical paper 2009-01-1172; 2009.
14. H Shih, M Shi, D Zeng, and Z. Xia Development of empirical shear fracture criterion for AHSS SAE Int J Mater Manuf 3 1 2010 670 675
15. Moshfegh R, Nilsson L. Finite element analysis of the Erichsen cupping test - with special reference to necking [Lic. Eng. thesis]. LiTH-IKP-LIC-1996:55. Linköping, Sweden: Dept. Mech. Eng., Linköping Inst. of Techn.; 1996.
16. SE Clift, P Hartley, CEN Sturgess, and GW. Rowe Fracture prediction in plastic deformation processes Int J Mech Sci 3232 1990 1 17 (Pubitemid 21656163)
17. M Jain, J Allin, and DJ. Lloyd Fracture limit prediction using ductile fracture criteria for forming of an automotive aluminium sheet Int J Mech Sci 41 1999 1273 1288
18. Y Bao, and T. Wierzbicki A comparative study on various ductile crack formation criteria J Eng Mater Technol - Trans ASME 126 2004 314 324 (Pubitemid 40122745)
19. T Wierzbicki, Y Bao, Y-W Lee, and Y. Bai Calibration and evaluation of seven fracture models Int J Mech Sci 47 2005 719 743 (Pubitemid 40583519)
20. Gurson AL. Continuum theory of ductile rupture by void nucleation and growth. Part I. Yield criteria and flow rules for porous ductile media. Technical report, COO-3084/39. Providence, RI, USA: Brown University; 1975.
21. T Tvergaard, and A. Needleman Analysis of the cup-cone fracture in a round tensile bar Arch Mech 32 1984 157 169 (Pubitemid 14509228)
22. J. Lemaitre A continuous damage mechanics model for ductile fracture J Eng Mater Technol 107 1985 83
23. Neukamm F, Feucht M, Haufe A, Roll K. On closing the constitutive gap between forming and crash simulation. In: Proceedings of the10th international LS-DYNA users conference. Detroit, USA; 2008.
24. Ebelsheiser H, Feucht M, Neukamm F. On calibrating advanced damage models using sheet metal coupon tests. In: Proceedings of the 7th LS-DYNA anwenderforum. Bamberg; 2008.
25. Neukamm F, Feucht M, Haufe A. Consistent damage modelling in the process chain of forming to crashworthiness simulations. In: Proceedings of the 7th LS-DYNA anwenderforum. Bamberg; 2008
26. Neukamm F, Feucht M, Bischoff M. On the application of continuum damage models to sheet metal forming simulations. In: Proceedings of the X international conference on computational plasticity, CIMNE. Barcelona; 2009.
27. Neukamm F, Feucht M, Haufe A. Considering damage history in crashworthiness simulations. In: Proceedings of the 7th European LS-DYNA conference. Salzburg, Austria; 2009.
28. Basaran M, Wölkerling SD, Feucht M, Neukamm F, Weichert D. An extension of the GISSMO damage model based on Lode angle dependence. In: Proceedings of the 9th LS-DYNA anwenderforum. Bamberg; 2010.
29. Effelsberg J, Haufe A, Feucht M, Neukamm F, Du Bois P. On parameter identification for the GISSMO damage model. In: Proceedings of the 12th international LS-DYNA users conference. Detroit, USA; 2012.
30. Kessler L, Gese H, Metzmacher G, Werner H. An approach to model sheet failure after onset of localised necking in industrial high strength steel stamping and crash simulations. SAE-paper 2008-01-0503; 2008.
31. H Aretz, S Keller, R Vogt, and O. Engler Modeling of ductile failure in aluminum sheet forming simulation Int J Mater Form 44 2011 163 182
32. Häggblad H-Å, Berglund D, Sundin KG, Oldenburg M. Formulation of a finite element model for localization and crack initiation in components of ultrahigh strength steels. In: Proceedings of the International Conference on Hot Sheet Metal Forming of High Performance Steel. Luleå: Verlag Wissenschaftliche Scripten; 2009.
33. R Östlund, M Oldenburg, H-Å Häggblad, and D. Berglund Evaluation of localization and failure of boron alloyed steels with different microstructure compositions J Mater Process Technol 214 2014 592 598
34. Borrvall T, Johansson T, Schill M, Jergéus J, Mattiasson K, DuBois P. A general damage initiation and evolution model (DIEM). In: Proceedings of the 9th European LS-DYNA conference. Manchester, UK; 2013.
35. Col A. Forming limit curves: are we at a turn? In: Proceedings of IDDRG'05. Besançon, France; 2005.
36. Arrieux R, Bedrin C, Boivin M. Determination of an intrinsic forming limit stress diagram for isotropic metal sheets. In: Proceedings of the 12th biennial meeting of the international deep drawing research group, working group meetings, WG I. Santa Margherita Ligure, Italy; 1982.
37. TB. Stoughton A general forming limit criterion for sheet metal forming Int J Mech Sci 42 2000 1 27
38. TB. Stoughton Stress-based forming limits in sheet metal forming J Eng Mater Technol 123 2001 417 422 (Pubitemid 33715759)
39. Stoughton TB. The influence of material model on the stress-based forming limit criterion. SAE Paper 2002-01-0157; 2002.
40. TB Stoughton, and X. Zhu Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD Int J Plast 20 2004 1463 1486
41. Zeng D, Chappuis L, Xia C, Zhu X. A path independent forming limit criterion for sheet metal forming simulation. SAE paper 2008-01-1445; 2008.
42. Zhu X. A more accurate approach to evaluate material formability. In: Proceedings of LS-DYNA forum. Bamberg; 2010.
43. LS-DYNA keyword user's manual, Volume II, Version R7.0. Livermore Software Technology Corporation.
44. Z Marciniak, and K. Kuczynski Limit strains in the process of stretch-forming sheet metal Int J Mech Sci 99 1967 609 620
45. RW Hutchinson, and KW. Neale Sheet necking - II time independent behavior DP Koistinen, NM Wang, Mechanics of sheet metal forming 1978 Plenum Press New York/London 127 153
46. O-G Lademo, T Berstad, OS Hopperstad, and KO. Pedersen A numerical tool for formability analysis of aluminium alloys. Part I: theory Steel Grips 22 2004 427 431
47. O-G Lademo, T Berstad, OS Hopperstad, and KO. Pedersen A numerical tool for formability analysis of aluminium alloys. Part II: experimental validation Steel Grips 22 2004 433 437
48. Reyes A, Hopperstad OS, Berstad T, Lademo O-G. Forming limit diagrams with an FE-based approach for sheets under non-proportional loading. In: Proceedings of the 7th European LS-DYNA conference. Salzburg, Austria; 2009.
49. O Björklund, R Larsson, and L. Nilsson Failure of high strength steel sheets: experiments and modeling J Mater Process Technol 213 2013 1103 1117
50. A Graf, and W. Hosford Effect of changing strain paths on forming limit diagrams of Al 2008-T4 Metall Trans A 24 1993 2503 2512
51. A Graf, and W. Hosford Influence of strain-path changes on forming limit diagrams of Al 6111-T4 Int J Mech Sci 36 1994 897 910
52. M Kuroda, and V. Tvergaard Effect of strain path change on limits to ductility of anisotropic metal sheets Int J Mech Sci 42 2000 867 887 (Pubitemid 32213444)