Analysis of bearing stiffness variations, contact forces and vibrations in radially loaded double row rolling element bearings with raceway defects

Mechanical Systems and Signal Processing

Volumn 50-51, Issue , 2015, Pages 139-160

  Petersen, Dick ^a   Howard, Carl ^a   Sawalhi, Nader ^b   Moazen Ahmadi, Alireza ^a   Singh, Sarabjeet ^a  

^a UNIVERSITY OF ADELAIDE   (Australia)

^b PRINCE MOHAMMAD BIN FAHD UNIVERSITY   (Saudi Arabia)

Author keywords

Bearing stiffness; Condition monitoring; Defect; Rolling element bearing; Varying compliance; Vibration

Indexed keywords

CONDITION MONITORING; DEFECTS; LOADS (FORCES); STIFFNESS; SURFACE ROUGHNESS; VIBRATION ANALYSIS; BALL BEARINGS; BEARINGS (MACHINE PARTS); SURFACE DEFECTS;

BEARING STIFFNESS; PARAMETRIC EXCITATIONS; QUASI-STATIC LOADS; ROLLING ELEMENT BEARING; STIFFNESS VARIATIONS; TIME FREQUENCY CHARACTERISTICS; VARYING COMPLIANCE; VIBRATION; VIBRATION RESPONSE;

ROLLER BEARINGS;

EID: 84905867216     PISSN: 08883270     EISSN: 10961216     Source Type: Journal    
DOI: 10.1016/j.ymssp.2014.04.014     Document Type: Article

References (59)

1. C.S. Sunnersjö Rolling bearing vibrations - The effects of geometric imperfections and wear J. Sound Vib. 98 4 1985 455 475
2. Y.T. Su, M.H. Lin, and M.S. Lee The effects of surface irregularities on roller bearing vibrations J. Sound Vib. 165 3 1993 455 466
3. L.D. Meyer, F.F. Ahlgren, and B. Weichbrodt An analytical model for ball bearing vibrations to predict vibration response to distributed defects J. Mech. Des. 102 1980 205 210
4. F.P. Wardle Vibration forces produced by waviness of the rolling surface of thrust loaded ball bearings. Part 1 Theory J. Mech. Eng. Sci. 202 C5 1988 305 312
5. F.P. Wardle Vibration forces produced by waviness of the rolling surface of thrust loaded ball bearings Part 2 Experimental validation J. Mech. Eng. Sci. 202 C5 1988 313 319
6. E. Yhland A linear theory of vibrations caused by ball bearings with form errors operating at moderate speeds J. Tribol. 114 1992 348 359
7. A. Choudhury, and N. Tandon A theoretical model to predict the vibration response of rolling bearings to distributed defects under radial load J. Vib. Acoust. 120 1998 214 220
8. K. Ono, and Y. Okada Analysis of ball bearing vibrations caused by outer race waviness J. Vib. Acoust. 120 1998 901 908
9. N. Aktürk The effect of waviness on vibrations associated with ball bearings J. Tribol. 121 1999 667 677
10. N. Tandon, and A. Choudhury A theoretical model to predict the vibration response of rolling bearings in a rotor bearing system to distributed defects under radial load J. Tribol. 122 2000 609 615
11. S.P. Harsha, K. Sandeep, and R. Prakash Non-linear dynamic behaviors of rolling element bearings due to surface waviness J. Sound Vib. 272 2004 557 580
12. S.P. Harsha Rolling bearing vibrations - The effects of surface waviness and radial internal clearance Int. J. Comput. Methods Eng. Sci. Mech. 7 2 2006 91 111
13. B. Changqing, and X. Qingyu Dynamic model of ball bearings with internal clearance and waviness J. Sound Vib. 194 2006 23 48
14. P.D. McFadden, and J.D. Smith Model for the vibration produced by a single point defect in a rolling element bearing J. Sound Vib. 96 1 1984 69 82
15. P.D. McFadden, and J.D. Smith The vibration produced by multiple point defects in a rolling element bearing J. Sound Vib. 98 2 1985 263 273
16. Y.T. Su, and S.J. Lin On initial fault detection of a tapered roller bearing: Frequency domain analysis J. Sound Vib. 155 1 1992 75 84
17. N. Tandon, and A. Choudhury An analytical model for the prediction of the vibration response of rolling element bearings due to localized defect J. Sound Vib. 205 1997 275 292
18. D. Brie Modelling of the spalled rolling element bearing vibration signal: An overview and some new results Mech. Syst. Signal Process. 14 3 2000 353 369
19. D. Ho, and R.B. Randall Optimisation of bearing diagnostic techniques using simulated and actual fault signals Mech. Syst. Signal Process. 14 5 2000 763 788
20. J. Antoni, and R.B. Randall A stochastic model for simulation and diagnostics of rolling element bearings with localized faults J. Vib. Acoust. 125 2003 282 289
21. J. Sopanen, and A. Mikkola Dynamic model of a deep-groove ball bearing including localized and distributed defects. Part 1 Theory J. Multi-body Dyn. 217 2003 201 211
22. J. Sopanen, and A. Mikkola Dynamic model of a deep-groove ball bearing including localized and distributed defects. Part 2 Implementation and results J. Multi-body Dyn. 217 2003 213 223
23. N. Sawalhi, and R.B. Randall Simulating gear and bearing interactions in the presence of faults. Part I The combined gear bearing dynamic model and the simulation of localised bearing faults Mech. Syst. Signal Process. 22 2008 1924 1951
24. N. Sawalhi, and R.B. Randall Simulating gear and bearing interactions in the presence of faults. Part II Simulation of the vibrations produced by extended bearing faults Mech. Syst. Signal Process. 22 2008 1952 1966
25. M. Cao, and J. Xiao A comprehensive dynamic model of double-row spherical roller bearing - Model development and case studies on surface defects, preloads, and radial clearance Mech. Syst. Signal Process. 22 2008 467 489
26. S. Sassi, B. Badri, and M. Thomas A numerical model to predict damaged bearing vibrations J. Vib. Control 13 11 2007 1603 1628
27. A. Rafsanjani, S. Abbasion, A. Farshidianfar, and H. Moeenfard Nonlinear dynamic modeling of surface defects in rolling element bearings J. Sound Vib. 319 2009 1150 1174
28. M.S. Patil, J. Mathew, P.K. Rajendrakumar, and S. Desai A theoretical model to predict the effect of localized defect on vibrations associated with ball bearing Int. J. Mech. Sci. 52 2010 1193 1201
29. M. Tadina, and M. Boltežar Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up J. Sound Vib. 330 2011 4287 4301
30. M. Behzad, A.R. Bastami, and D. Mba A new model for estimating vibrations generated in the defective rolling element bearings J. Vib. Acoust. 133 2011 1 8
31. M.R. Hoeprich Rolling element bearing fatigue damage propagation J. Tribol. 114 1992 328 333
32. N. Tandon, and A. Choudhury A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings Tribol. Int. 32 8 1999 469 480
33. M.W. Hawman, W.S. Galinaitas, Acoustic emission monitoring of rolling element bearings, in: Proceedings of the IEEE 1988 Ultrasonics Symposium, 1988, pp. 885-889.
34. D.E. Butler The shock-pulse method for the detection of damaged rolling bearings Non-Destr. Test. 6 2 1973 92 95
35. C. Scheffer, and P. Girdhar Machinery Vibration Analysis & Predictive Maintenance 2004 Elsevier UK
36. R.B. Randall, and J. Antoni Rolling element bearing diagnostics - A tutorial Mech. Syst. Signal Process. 25 2011 485 520
37. M.S. Darlow, R.H. Badgley, G.W. Hogg, Application of High-frequency Resonance Techniques for Bearing Diagnostics in Helicopter Gearboxes, U.S. Army Air Mobility Research and Development Laboratory, 1974.
38. B.P. Graney, and K. Starry Rolling element bearing analysis Mater. Eval. 70 1 2011 78 85
39. N. Sawalhi, and R.B. Randall Vibration response of spalled rolling element bearings Observations, simulation and signal processing techniques to track the spall size Mech. Syst. Signal Process. 25 2011 846 870
40. C.S. Sunnersjö Varying compliance vibrations of rolling bearings J. Sound Vib. 58 3 1978 363 373
41. T.C. Lim, and R. Singh Vibration transmission through rolling element bearings, Part I Bearing stiffness formulation J. Sound Vib. 139 2 1990 179 199
42. T.C. Lim, and R. Singh Vibration transmission through rolling element bearings, Part V Effect of distributed contact load on roller bearing stiffness matrix J. Sound Vib. 169 4 1994 547 553
43. H. Liew, and T.C. Lim Analysis of time-varying rolling element bearing characteristics J. Sound Vib. 283 2005 1163 1179
44. S. Singh, U.G. Köpke, C.Q. Howard, D. Petersen, Analyses of contact forces and vibration response for a defective rolling element bearing using an explicit dynamics finite element model, J. Sound Vib., http://dx.doi.org/10. 1016/j.jsv.2014.05.011, accepted for publication.
45. A. Liew, N. Feng, and E.J. Hahn Transient rotordynamic modeling of rolling element bearing systems J. Eng. Gas Turbines Power 124 2002 984 991
46. R.S. Sayles, and S.Y. Poon Surface topography and rolling element vibration Precis. Eng. 3 3 1981 137 144
47. W. Soedel Vibration of Shells and Plates 3rd ed. 2004 Marcel Dekker Inc. New York, USA
48. J. Antoni, and R.B. Randall Differential diagnosis of gear and bearing faults J. Vib. Acoust. 124 2002 165 171
49. T.A. Harris, and M.N. Kotzalas Rolling Bearing Analysis - Essential Concepts of Bearing Technology 5th ed. 2006 CRC Press Boca Raton, Florida, USA
50. A. Gunduz, and R. Singh Stiffness matrix formulation for double row angular contact ball bearings analytical development and validation J. Sound Vib. 332 2013 5898 5916
51. A. Gunduz, J.T. Dreyer, and R. Singh Effect of bearing preloads on the modal characteristics of a shaft-bearing assembly Experiments on double row angular contact ball bearings Mech. Syst. Signal Process. 31 2012 176 195
52. D.A. Bies, and C.H. Hansen Engineering Noise Control: Theory and Practice 3rd ed. 2003 Spon Press USA
53. P.J. Sweeney, Transmission error measurement and analysis (Ph.D. thesis), University of New South Wales, 1994.
54. S. Du, Dynamic modelling and simulation of gear transmission errors for gearbox vibration analysis (Ph.D. thesis), University of New South Wales, 1997.
55. H. Endo, and R.B. Randall Differential diagnosis of spalls vs cracks in the gear tooth fillet region J. Fail. Anal. Prev. 4 5 2004 57 65
56. H. Endo, A study of gear faults by simulation, and the development of differential diagnostics techniques (Ph.D. thesis), University of New South Wales, 2005.
57. Y. Gao, R.B. Randall, Simulation of Geometric, Static and Dynamic Gear Transmission Errors, Technical Report, Report CEVA-2000-01, Centre of Expertise in Vibration Analysis, University of New South Wales, 2000.
58. D. Ho, Bearing diagnostics and self-adaptive noise cancellation (Ph.D. thesis), University of New South Wales, 1999.
59. Y.T. Su, and Y.T. Sheen On the detectability of roller bearing damage by frequency analysis J. Mech. Eng. Sci. 207 23 1993 23 32