The Fundamentals of Corrosion and Scaling for Petroleum and Environmental Engineers

The Fundamentals of Corrosion and Scaling for Petroleum and Environmental Engineers

Volumn , Issue , 2013, Pages 1-276

  Chilingar, George V ^a   Mourhatch, Ryan ^a   Al Qahtani, Ghazi D ^b  

^a University of Southern California   (United States)

^b SAUDI ARAMCO   (Saudi Arabia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84905806213     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2013-0-15528-6     Document Type: Book

References (279)

1. American Petroleum Institute, 1977. Design Calculations for Sucker Rod Pumping Systems. Dallas, TX: API RP 11L, 24 pp.
2. American Petroleum Institute, 1983. API Recommended Practice for Care and Use if Subsurface Pumps, Dallas, TX: API RP 11 AR, 41 pp.
3. Annand, R. R., 1981. Corrosion Characteristics and Control in Deep, Hot Gas Wells. Southwestern Petroleum Short Course.
4. Battelle Memorial Institute, 1949. Prevention of the Failure of Metals Under Repeated Stress. New York, NY: Wiley, 295 pp.
5. Bertness, T. A., 1957. Reduction of failures caused by corrosion in pumping wells. API Dril. Prod. Pract., 37: 129-135.
6. Bertness, T. A., Chilingar, G. V., and Al-Bassam, M., 1989. Corrosion in drilling and producing operations. In: G. V. Chilingar, J. Robertson, and S. Kumar (Editors), Surface Operations in Petroleum Production, II, Amsterdam: Elsevier, pp. 283-317.
7. Blount, F. E., 1970. Fundamentals of cathodic protection. In: Proc. Corrosion Course, Univ. Oklahoma, OK, Sept. 14-16.
8. Chilingar, G. V. and Beeson, C. M., 1969. Surface Operations in Petroleum Production. New York, NY: American Elsevier, 397 pp.
9. Cron, C. J. and Marsh, G. A., 1983. Overview of economics and engineering aspects of corrosion in oil and gas production. J. Pet. Technol., June: 1033-1041.
10. Davis, J. B., 1967. Petroleum Microbiology. Amsterdam: Elsevier, 604 pp.
11. Dean, H. J., 1977. Avoiding drilling and completion corrosion. Pet. Eng., 10(9): 23-28.
12. Deming, H. G., 1940. Fundamental Chemistry. New York and London: John Wiley and Sons, Inc., 756 pp.
13. Doig, K. and Wachter, A. P., 1951. Bacterial casing corrosion in the Ventura Field. Corrosion, 7: 221-224.
14. Fontana, M. G. and Greene, N. D., 1967. Corrosion Engineering. New York, NY: McGraw-Hill, 391 pp.
15. Gatzke, L. K. and Hausler, R. H., 1983. Gas well corrosion inhibition with KP 223/KP 250. NACE Annual Conf., April 18-22, Anaheim, CA.
16. Hackerman, N. and Snavely, E. S., 1971. Fundamentals of inhibitors. In: NACE Basic Corrosion Course. NACE, Houston, TX, (9): 1-25.
17. Heitz, E., Henkhans, R., and Rahmel, A., 1992. Corrosion Science. An Experimental Approach. New York, NY: Ellis Horwood, 225 pp.
18. Hilliard, H. M., 1980. Corrosion control in Cotton Valley production. Soc. Pet. Eng. Cotton Valley Symp., SPE 9062,Tyler, TX, May 21: 4 pp.
19. Hudgins, C. M., 1969. A review of corrosion problems in the petroleum industry. Mater. Prot., 8(1): 41-47.
20. Hudgins, C. M., McGlasson, R. L., Mehdizadeh, P., and Rosborough, W. M., 1966. Hydrogen sulfide cracking of carbon and alloy steels. Corrosion, 22(8): 238-251.
21. Ironite Products Co., 1979. Hydrogen Sulfide Control, 41 pp.
22. Jones, L. W., 1988. Corrosion and Water Technology for Petroleum Producers. Tulsa, OK: Oil and Gas Consultants International, Inc. (OGCI Publications), 202 pp.
23. Kubit, R. W., 1968. E log I-Relationship to Polarization. Paper No. 20, Conf. NACE, Cleveland, OH.
24. Martin, R. L., 1979. Potentiodynamic polarization studies in the field. Mater. Perform., 18(3): 41-50.
25. Martin, R. L., 1980. Inhibition of corrosion fatigue of oil well sucker rod strings. Mater. Perform., 19(6): 20-23.
26. Martin, R. L., 1982. Use of electrochemical methods to evaluate corrosion inhibitors under laboratory and field condition. U.M.I.S.T. Conf. of Electrochemical Techniques, Manchester.
27. Martin, R. L., 1983. Diagnosis and inhibition of corrosion fatigue and oxygen influenced corrosion. Mater. Perform., 32(9): 41-50.
28. May, P. D., 1978. Hydrogen sulfide control. Drilling-DCW, April.
29. Meyer, F. H., Riggs, O. L., McGlasson, R. L., and Sudbury, J. D. 1958. Corrosion products of mild steel in hydrogen sulfide environments. Corrosion, 14(2): 109t-115t.
30. National Association of Corrosion Engineers, 1979. Corrosion Control in Petroleum Production, NACE TPC Publ. No. 5: 101 pp.
31. NGAA (Natural Gasoline Association of America), 1953. Condensate Well Corrosion. Tulsa, OK: N.G.A.A., 203 pp.
32. Oxford, W. F. Jr. and Foss, R. E., 1958. Corrosion of Oil-and Gas-Well Equipment. Dallas, TX: Division of Production, American Petroleum Institute, 87 pp.
33. Ray, J. D., Randall, B. V., and Parker, J. C., 1978. Use of Reactive Iron Oxide to Remove H2S from Drilling Fluid. 53rd Annu. Fall Tech. Conf. Soc. Pet. Eng. AIME, Oct. 1-3, Houston, TX, 4 pp.
34. Rhodes, F. H. and Clark, J. M., 1936. Corrosion of metals by water and carbon dioxide under pressure. Ind. Eng. Chem., 28(9): 1078-1079.
35. Simpson, J. P., 1979. A new approach to oil-base muds for lower-cost drilling. J. Pet. Technol., 31(5): 643-650.
36. Snavely, E. S., 1971. Chemical removal of oxygen from natural waters. J. Pet. Technol., 23(4): 443-446.
37. Snavely, E. S. and Blount, F. E., 1969. Rates of reaction of dissolved oxygen with scavengers in sweet and sour brines. Corrosion, 25(10): 397-404.
38. Staehle, R. W., 1978. $ 70 billion plus or minus $ 21 billion (editorial). Corrosion, 34(6): 1-3.
39. Starkey, R. L., 1958. The general physiology of the sulfate-reducing bacteria in relation to corrosion. Prod. Mon., 22(8): 12-30.
40. Uhlig, H. H. (Editor), 1948. The Corrosion Handbook. New York, NY: Wiley, 1188 pp.
41. Uhlig, H. H., 1965. Corrosion and Corrosion Control, 3rd ed. New York, NY: Wiley, 371 pp.
42. Watkins, J. W. and Wright, J., 1953. Corrosive action on steel by gases dissolved in water. Pet. Eng., 25(12, Nov.): B50-B57.
43. Weeter, R. F., 1965. Desorption of oxygen from water using natural gas for countercurrent stripping. J. Petrol. Technol., 17(5): 51.
44. Wendt, R. P., 1979. The kinetics of Ironite Sponge H2S reactions. Pet. Div. Am. Soc. Mech. Eng., Energy Technol. Conf., Houston, TX, Nov. 5-9, 1978: 7 pp.
45. Wendt, R. P., 1979. Control of hydrogen sulfide by alkalinity may be dangerous to your health. Pet. Eng. Int., 51(6, May): 66-74.
46. Wendt, R. P., 1979. Alkalinity control of H2S in muds is not always safe. World Oil, 188 (2, Aug.): 60-61.
47. Whitman, W., Russell, R., and Altieri, V., 1924. Ind. Eng. Chem., 16: 665.
48. Zaba, J., 1962. Modern Oil-Well Pumping. Tulsa, OK: The Petroleum Publishing Co., 145 pp.
49. Annand, R. R., 1981. Corrosion Characteristics and Control in Deep, Hot Gas Wells. Southwestern Petroleum Short Course.
50. Battelle Memorial Institute, 1949. Prevention of the Failure of Metals Under Repeated Stress. New York, NY: Wiley, 295 pp.
51. Bertness, T. A., 1957. Reduction of failures caused by corrosion in pumping wells. API Dril. Prod. Pract., 37: 129-135.
52. Bertness, T. A., Chilingar, G. V., and Al-Bassam, M., 1989. Corrosion in drilling and producing operations. In: G. V. Chilingar, J. Robertson, and S. Kumar (Editors), Surface Operations in Petroleum Production, II, Amsterdam: Elsevier, pp. 283-317.
53. Chilingar, G. V. and Beeson, C. M., 1969. Surface Operations in Petroleum Production. New York, NY: American Elsevier, 397 pp.
54. Cron, C. J. and Marsh, G. A., 1983. Overview of economics and engineering aspects of corrosion in oil and gas production. J. Pet. Technol., June: 1033-1041.
55. Davis, J. B., 1967. Petroleum Microbiology. Amsterdam: Elsevier, 604 pp.
56. Dean, H. J., 1977. Avoiding drilling and completion corrosion. Pet. Eng., 10(9): 23-28.
57. Deming, H. G., 1940. Fundamental Chemistry. New York and London: John Wiley and Sons, Inc., 756 pp.
58. Doig, K. and Wachter, A. P., 1951. Bacterial casing corrosion in the Ventura Field. Corrosion, 7: 221-224.
59. Fontana, M. G. and Greene, N. D., 1967. Corrosion Engineering. New York, NY: McGraw-Hill, 391 pp.
60. Gatzke, L. K. and Hausler, R. H., 1983. Gas well corrosion inhibition with KP 223/KP 250. NACE Annual Conf., April 18-22, Anaheim, CA.
61. Hackerman, N. and Snavely, E. S., 1971. Fundamentals of inhibitors. In: NACE Basic Corrosion Course. NACE, Houston, TX, (9): 1-25.
62. Hilliard, H. M., 1980. Corrosion control in Cotton Valley production. Soc. Pet. Eng. Cotton Valley Symp., SPE 9062,Tyler, TX, May 21: 4 pp.
63. Hudgins, C. M., 1969. A review of corrosion problems in the petroleum industry. Mater. Prot., 8(1): 41-47.
64. Hudgins, C. M., McGlasson, R. L., Mehdizadeh, P., and Rosborough, W. M., 1966. Hydrogen sulfide cracking of carbon and alloy steels. Corrosion, 22(8): 238-251.
65. Ironite Products Co., 1979. Hydrogen Sulfide Control. 41 pp.
66. May, P. D., 1978. Hydrogen sulfide control. Drilling-DCW, April.
67. Martin, R. L., 1979. Potentiodynamic polarization studies in the field. Mater. Perform., 18(3): 41-50.
68. Martin, R. L., 1980. Inhibition of corrosion fatigue of oil well sucker rod strings. Mater. Perform., 19(6): 20-23.
69. Meyer, F. H., Riggs, O. L., McGlasson, R. L., and Sudbury, J. D. 1958. Corrosion products of mild steel in hydrogen sulfide environments. Corrosion, 14(2): 109t-115t.
70. National Association of Corrosion Engineers, 1979. Corrosion Control in Petroleum Production, NACE TPC Publ. No. 5: 101 pp.
71. NGAA (Natural Gasoline Association of America), 1953. Condensate Well Corrosion. Tulsa, OK: N.G.A.A., 203 pp.
72. Oxford, W. F. Jr. and Foss, R. E., 1958. Corrosion of Oil-and Gas-Well Equipment. Dallas, TX: Division of Production, American Petroleum Institute, 87 pp.
73. Rahman, S. S. and Chilingarian, G. V., 1995. Casing Design: Theory and Practice. Elsevier, Amsterdam, The Netherlands, 373 pp.
74. Ray, J. D., Randall, B. V., and Parker, J. C., 1978. Use of Reactive Iron Oxide to Remove H2S from Drilling Fluid. 53rd Annu. Fall Tech. Conf. Soc. Pet. Eng. AIME, Oct. 1-3, Houston, TX: 4 pp.
75. Rhodes, F. H. and Clark, J. M., 1936. Corrosion of metals by water and carbon dioxide under pressure. Ind. Eng. Chem., 28(9): 1078-1079.
76. Simpson, J. P., 1979. A new approach to oil-base muds for lower-cost drilling. J. Pet. Technol., 31(5): 643-650.
77. Snavely, E. S., 1971. Chemical removal of oxygen from natural waters. J. Pet. Technol., 23(4): 443-446.
78. Snavely, E. S. and Blount, F. E., 1969. Rates of reaction of dissolved oxygen with scavengers in sweet and sour brines. Corrosion, 25(10): 397-404.
79. Staehle, R. W., 1978. $ 70 billion plus or minus $ 21 billion (editorial). Corrosion, 34(6): 1-3.
80. Uhlig, H. H. (Editor), 1948. The Corrosion Handbook. New York, NY: Wiley, 1188 pp.
81. Uhlig, H. H., 1965. Corrosion and Corrosion Control, 3rd ed. New York, NY: Wiley, 371 pp.
82. Watkins, J. W. and Wright, J., 1953. Corrosive action on steel by gases dissolved in water. Pet. Eng., 25(12, Nov.): B50-B57.
83. Wendt, R. P., 1979. The kinetics of Ironite Sponge H2S reactions. Pet. Div. Am. Soc. Mech. Eng., Energy Technol. Conf., Houston, TX, Nov. 5-9, 1978: 7 pp.
84. Wendt, R. P., 1979. Control of hydrogen sulfide by alkalinity may be dangerous to your health. Pet. Eng. Int., 51(6, May): 66-74.
85. Wendt, R. P., 1979. Alkalinity control of H2S in muds is not always safe. World Oil, 188 (2, Aug.): 60-61.
86. Whitman, W., Russell, R., and Altieri, V., 1924. Effect of Hydrogen-Ion Concentration on the Submerged Corrosion of Steel. Ind. Eng. Chem., 16: 665.
87. Wilhelm, S. M. and Kane, R. D., 1987. Status Report: Corrosion Resistant Alloys, Petroleum Engineering International, March: 36-41.
88. Anonymous, 1972. Bacteria have destroyed 10% of the world's crude. World Oil, 174(2): 28-29.
89. Atlas, R. M., 1981. Microbial degradation of petroleum hydrocarbons: an environmental perspective. Microbiol Rev., 45: 180-209.
90. Bailey, N. J. L., Jobson, A. J., and Rogers, M. A., 1973. Bacterial degradation of crude oil: comparison of field and experimental data. Chem. Geol., 11: 203-221.
91. Bryant, R. S., 1986. Microbial transformation of hydrocarbons. U.S. Dep. Energy, Rept. NIPER-213: 19 pp.
92. Bryant, R. S., Donaldson, E. C., Yen, T. F., and Chilingarian, G. V., 1989. Microbial enhanced oil recovery. In: E. C. Donaldson, G. V. Chilingar, and T. F. Yen (Editors), Enhanced Oil Recovery, II, Processes and Operations, Developments in Petroleum Science No 39, Amsterdam: Elsevier, pp. 423-450.
93. Bubela, B., 1983. Combined effects of temperature and other environmental stresses on MEOR. In: E. C. Donaldson and J. B. Clark (Editors), Proceedings of 1982 International Conference on Microbial Enhancement of Oil Recovery, Afton, OK, May 16-21. Springfield, VA: NTIS, pp. 118-123.
94. Chakrabarty, A. M., 1982. Biodegradation of Detoxification Environmental Pollutants. Boca Raton, FL: CRC Press, 160 pp.
95. Crawford, P. B., 1983. Possible reservoir damage from MEOR. In: E. C. Donaldson and J. B. Clark (Editors), Proceedings of 1982 International Conference on Microbial Enhancement of Oil Recovery, Afton, OK, May 16-21. Springfield, VA: NTIS, pp. 76-79.
96. Davies, J. S. and Westlake, D. W. S., 1979. Crude oil utilization by fungi. Can. J. Microbiol., 25: 146-156.
97. Donaldson, E. C. and Clark J. B., 1982. Conference focuses on microbial enhancement of oil recovery. Oil Gas J., 80(51): 47-52.
98. Donaldson, E. C., Chilingarian, G. V., and Yen, T. F., 1989a. Enhanced Oil Recovery, II, Processes and Operations. Amsterdam: Elsevier Science, 604 pp.
99. Donaldson, E. C., Chilingarian, G. V., and Yen, T. F., 1989b. Microbial Enhanced Oil Recovery, Development in Petroleum Science, 22. Amsterdam: Elsevier, 227 pp.
100. Fedorak, P. M., Foght, J. M., and Westlake, D. W. S., 1983. Comparative studies on microbial degradation of aromatics and saturates in crude oil. In: J. E. Zajic, D. G. Cooper, T. R. Jack, and N. Kosaric(Editors), Microbial Enhanced Oil Recovery, Tulsa, OK: PennWell Books, pp. 162-172.
101. Gates, G. P. L. and Parent, C. F., 1976. Water quality control presents challenge in giant Wilmington Field. Oil Gas J., 74(33): 115-126.
102. Gaudy, A. F. Jr. and Gaudy, E. T., 1980. Microbiology for Environmental Scientists and Engineers. New York, NY: McGraw Hill, 736 pp.
103. Grula, M. M. and Sewell, G. W., 1983. Microbial interactions with polyacrylamide polymers. In: E. C. Donaldson and J. B. Clark (Editors), Proceedings of 1982 International Conference on Microbial Enhancement of Oil Recovery, Afton, OK, May 16-21. Springfield, VA: NTIS, pp. 129-134.
104. Grula, E. A., Russell, H. H., Bryant, D., Kenaga, M., and Hart, M., 1983. Isolation and screening of Clostridium for possible use in MEOR. In: E. C. Donaldson and J. B. Clark (Editors), Proceedings of 1982 International Conference on Microbial Enhancement of Oil Recovery, Afton, OK, May 16-21. Springfield, VA: NTIS, pp. 43-47.
105. Guiamet, P. S. and Videla, H. A., 1987. Protective action of Serratia marcescens in relation to the corrosion of aluminum and its alloys. In: G. C. Llewellyn and C. E. O'Rear (Editors), Biodeterioration Research, New York, NY: Plenum Press, p. 275.
106. Heineke, G. W., 1996. Microbiology and epidemiology. In: J. G. Henry and G. W. Heinke (Editors), Environmental Science and Engineering, Inc., NJ: Prentice Hall, pp. 254-302.
107. Henry, J. G. and Heinke, G. V., 1996. Environmental Science and Engineering. NJ: Prentice Hall, 778 pp.
108. Hitzman, D. O., 1983. Petroleum microbiology and the history of its role in EOR. In: E. C. Donaldson and J. B. Clark (Editors), Proceedings of 1982 International Conference on Microbial Enhancement of Oil Recovery, Afton, OK, May 16-21. Springfield, VA: NTIS, pp. 162-218.
109. Ivanov, M. V. and Belyaev, S. S.,1983. Microbial activity in water flooded oilfields and its possible regulation. In: E. C. Donaldson and J. B. Clark (Editors), Proceedings of 1982 International Conference on Microbial Enhancement of Oil Recovery, Afton, OK, May 16-21. Springfield, VA: NTIS, pp. 48-57.
110. Jack, T. R. and Thompson, B. G., 1983. Patents employing microbes in oil production. In: J. E. Zajic, D. G. Cooper, T. R. Jack, and N. Kosaric (Editors), Microbial Enhanced Oil Recovery. Tulsa, OK: PennWell Books, pp. 14-25.
111. Jones, L. W, 1988. Corrosion and Water Technology for Petroleum Producers. Tulsa, OK: OGCI Publications, 202 pp.
112. Lazar, I. and Constantinescu, P., 1985. Field trials results of microbial enhanced oil recovery. In: J. E. Zajic and E. C. Donaldson (Editors), Microbes and Oil Recovery. El Paso, TX: Bioresources Publications, pp. 122-143.
113. Levenspiel, O., 1972. Chemical Reaction Engineering. New York, NY: John Wiley and Sons, 578 pp.
114. Marquis, R. E., 1983. Barobiology of deep oil formations. In: E. C. Donaldson and J. B. Clark (Editors), Proceedings of 1982 International Conference on Microbial Enhancement of Oil Recovery, Afton, OK, May 16-21. Springfield, VA: NTIS, pp. 124-128.
115. McCoy, W. F. and Costerton, J. W., 1982. Growth of sessile Sphaerotilus natans in tubular recycle system. Appl. Environ. Microbiol., 43: 1490-1494.
116. Moses, V. and Springham, D. G., 1982. Bacteria and Enhancement of Oil Recovery. London: Applied Science Publishers, 178 pp.
117. Moses, V., Robinson, J. P., and Springham, D. G., 1983. Microbial enhancement of oil recovery in North Sea reservoirs: a requirement for anaerobic growth on crude oil. In: E. C. Donaldson and J. B. Clark (Editors), Proceedings of 1982 International Conference on Microbial Enhancement of Oil Recovery, Afton, OK May 16-21. Springfield, VA: NTIS, pp. 154-157.
118. Nester, E. W., Roberts, C. E., Pearsall, N. N., and McCarthy, B. J., 1978. Microbiology. New York, NY: Holt, Rinehart and Winston, 769 pp.
119. Petzel, G. A. and Williams, B., 1986. Operators trim basic EOR research. Oil Gas J., 84(6): 41-45.
120. Singer, M. E., 1985. Microbial biosurfactants. In: J. E. Zajic and E. C. Donaldson (Editors), Microbes and Oil Recovery. El Paso, TX: Bioresources Publications, pp. 19-38.
121. Singer, M. E., Finnerty, W. R., Bolden, P., and King A. D., 1983. Microbial processes in the recovery of heavy petroleum. In: E. C. Donaldson and J. B. Clark (Editors), Proceedings of 1982 International Conference on Microbial Enhancement of Oil Recovery, Afton, OK, May 16-21. Springfield, VA: NTIS, pp. 94-101.
122. Videla, H. A., 1996. Manual of BIOCORROSION. CRC Press, Lewis Publishers, Boca Raton, FL, 273 pp.
123. Videla, H. A., Guiamet, P. S., doValle, S. M., and Reinoso, E. H., 1988. Effect of fungal and bacterial contaminants of kerosene fuels on the corrosion of storage and distribution systems. In: Corrosion 88, Paper No. 91, St. Louis, MO. Houston, TX: NACE. http://www.lbl.gov/Publications/Currents/Archive/Apr-30-2004.html
124. http://en.wikipedia.org
125. www.acadweb.wwu.edu/courses/envr429-rm/
126. Allen, T. O. and Roberts, A. P., 1982. Production Operations, Well Completions, Workover, and Stimulation. Tulsa, OK: Oil and Gas Consultants International, Inc., 241 pp.
127. Axelson, Inc., 1999. Pump and Rod Engineering Manual. 92 pp.
128. Becker, J. R., 1998. Corrosion and Scale Handbook. Tulsa, OK: PennWell, 329 pp.
129. Bertness, T. A., Chilingarian, G. V., and Al-Bassam, M., 1989. Corrosion in drilling and producing operations. In: G. V. Chilingarian, J. Robertson, and S. Kumar (Editors), Surface Operations in Petroleum Production, II, Amsterdam: Elsevier, pp. 283-317.
130. Blount, F. E., 1970. Fundamentals of cathodic protection. In: Proc. Corrosion Course. Univ. Oklahoma, Sept: 14-16.
131. Cron, C. J. and Marsh, G. A., 1983. Overview of economics and engineering aspects of corrosion in oil and gas production. J. Pet. Technol., June: 1033-1041.
132. Fontana, M. G. and Greene, N. D., 1967. Corrosion Engineering. New York, NY: McGraw-Hill, 391 pp.
133. Hackerman, N. and Snavely, E. S., 1971. Fundamentals of inhibitors. In: NACE Basic Corrosion Course. NACE, Houston, TX, (9): 1-25.
134. Heitz, E., Henkhaus, R., Rahmel, A., Waterhouse, R. B., and Rog Holmos, D., 1992. Corrosion Science: An Experimental Approach. New York: Ellis Horwood, 225 pp.
135. Hilliard, H. M., 1980. Corrosion control in Cotton Valley production. Soc. Pet. Eng. Cotton Valley Symp., SPE 9062,Tyler, TX, May 21: 4 pp.
136. Jones, L. W., 1988. Corrosion and Water Technology for Petroleum Producers. Tulsa, OK: Oil and Gas Consultants International, Inc. (OGCI Publications), 202 pp.
137. Kubit, R. W., 1968. E log I-Relationship to Polarization. Paper No. 20, Conf. NACE, Cleveland, OH.
138. Martin, R. L., 1979. Potentiodynamic polarization studies in the field. Mater. Perform., 18(3): 41-50.
139. Martin, R. L., 1980. Inhibition of corrosion fatigue of oil well sucker rod strings. Mater. Perform., 19(6): 20-23.
140. Martin, R. L., 1982. Use of electrochemical methods to evaluate corrosion inhibitors under laboratory and field condition. U.M.I.S.T. Conf. of Electrochemical Techniques, Manchester.
141. Martin, R. L., 1983. Diagnosis and inhibition of corrosion fatigue and oxygen influenced corrosion. Mater. Perform., 32(9): 41-50.
142. May, P. D., 1978. Hydrogen sulfide control. Drilling-DCW, April.
143. National Association of Corrosion Engineers, 1979. Corrosion Control in Petroleum Production, NACE TPC Publ. No. 5: 101 pp.
144. Parker, M. E. and Peattie, E. G., 1999. Pipeline Corrosion and Cathodic Protection. Gulf Professional Publishing, Houston, TX, 166 pp.
145. Uhlig, H. H. (Editor), 1948. The Corrosion Handbook. New York, NY: Wiley, 1188 pp.
146. Uhlig, H. H., 1965. Corrosion and Corrosion Control, 3rd ed. New York, NY: Wiley, 371 pp.
147. Wendt, R. P., 1979. Control of hydrogen sulfide by alkalinity may be dangerous to your health. Pet. Eng. Int., 51(6, May): 66-74.
148. Wendt, R. P., 1979. Alkalinity control of H2S in muds is not always safe. World Oil, 188 (2, Aug.): 60-61.
149. Blount, F. E., 1970. Fundamentals of cathodic protection. In: Proc. Corrosion Course, Univ. Oklahoma, OK, Sept: 14-16.
150. Cron, C. J. and Marsh, G. A., 1983. Overview of economics and engineering aspect of corrosion in oil and gas production. J. Petrol. Thechnol., June: 1033-1041.
151. Cryer J., Dennis B., Lewis R., Palmer K, and Watfa M., 1987. Logging Techniques for Casing Corrosion. The Technical Review, (35)4: 32-39.
152. Jones, L. W., 1988. Corrosion and Water Technology for Petroleum Producers. Tulsa, OK: Oil and Gas Consultants International, Inc. (OGCI Publications), 202 pp.
153. Kane, R. D. and Greer, J. B., 1977. Sulphide stress cracking of high-strength steels in laboratory and oilfield environments. J. Petrol. Technol., 29(11): 1483-1488.
154. Kirklen, C. A., 1973. Well Casing Cathodic Protection Effectiveness-An Analysis in Retrospect. Paper presented at the 48th Annu. Fall Meet., Soc. Petrol. Engrs. AIME, Las Vegas, NV, Sept. 30-Oct. 3: 6 pp.
155. NACE (National Association of Corrosion Engineers), 1979. Corrosion Control in Petroleum Production, NACE TPC Publ. No. 5: 101 pp.
156. Parker, M. E. and Peattie, E. G., 1999. Pipe Line Corrosion and Cathodic Protection, 3rd ed. Gulf Professional Publishing an Imprint of Elsevier, Houston, TX, 166 pp.
157. Rahman, S. S. and Chilingarian, G. V., 1995. Casing Design: Theory and Practice. Elsevier, Amsterdam, The Netherlands, 373 pp.
158. Romanoff, M., 1957. Underground Corrosion, Circ. 579. National Bureau of Standards.
159. Wilhelm, S. M. and Kane, R. D., 1987. Status Report: Corrosion Resistant Alloys, Petroleum Engineering International. March: 36-41.
160. Allen, T. O. and Roberts, A. P., 1982. Production Operation, Well Completions, Workover, and Stimulation. Oil and Gas Consultants International, Inc., Tulsa, OK: 241 pp.
161. Babalyan, G. A., 1956. Questions on Mechanism of Oil Recovery, Aznefteizdat, Baku: 254 pp.
162. Becker, J. R., 1998. Corrosion and Scale Handbook. Tulsa, OK: PennWell Publishing Company, 329 pp.
163. Bernard, G. C., 1967. Effect of floodwater salinity on recovery of oil from cores containing clays, SPE Paper 1725 presented at AIME Meeting in Los Angeles, CA (Oct. 1967): 8 pp.
164. Carlberg, B. L., Casad, B. M., Brace, R. L., and Chambers, F. B. Jr., 1962. Stabilize water for high-temperature flooding. Oil and Gas J., July 2: 120-122.
165. Chilingar, G. V., 1968. Increase in oil recovery by changing chemistry of water. Bull. O.N.G.C. (India), 4(2): 25-26.
166. Chilingarian, G. V., 1956. Solubility of calcite, dolomite, and magnesite, and mixture of these carbonates. Amer. Assoc. Petrol. Geologists, 40(11): 2770-2773.
167. Chiligarian, G. V., Robertson, J. O. Jr., and Kumar, S., 1989. Surface Operations in Petroleum Production, II. Amsterdam: Elsevier Science Publishers B.V., 397 pp.
168. Fulford, R. S., 1968. Effect of brine concentration and pressure drop on gypsum scaling in oil wells. J. Petrol. Technol., June: 559.
169. Jones, L. W., 1988. Corrosion and Water Technology for Petroleum Producers. Tulsa, OK: Oil and Gas Consultants International, Inc. (OGCI Publications), 202 pp.
170. Langelier, W. G., 1936. The analytical control of anti-corrosion water treatment. J. Am. Water Works Assoc., 28: p 1500.
171. Langnes, G. L., Robertson, J. O. Jr., and Chilingar, G. V., 1972. Secondary Recovery and Carbonate Reservoirs. New York, NY: American Elsevier Publishing Company, Inc., 304 pp.
172. Lindlof, J. D. and Stoffer, K. G., 1983. A case study of seawater injection incompatibility. J. Petrol. Technol., July: 1256-1262.
173. Nazaroff, W. W. and Alvarez-Cohen, L., 2001. Environmental Engineering Science. John Wiley and Sons, lnc., New York, 690 pp.
174. Patton, C. C., 1977. Oilfield Water Systems, 2nd ed. Norman, OK: Campbell Petroleum Series.
175. Sinnokrot, A. and Chilingar, G. V., 1961. Effect of polarity of oil and presence of carbonate particles on relative permeability of rocks. The Compass of Sigma Gamma Epsilon, 38: 115-120.
176. Stiff, H. A. and Davis, L. E., 1952. A method for predicting the tendency of oilfield waters to deposit calcium carbonate. Petroleum Trans., AIME, 195: 213.
177. Templeton, C. C., 1960. Solubility of barium sulfate in sodium chloride solutions from 25° C to 95° C. J. Chem. Eng. Data, 5: 514.
178. Weintritt, D. J. and Cowan, J. C., 1967. Unique characteristics of barium sulfate scale deposition. J. Petrol. Technol., 19: 1381.
179. Wright, C. C. and Chilingarian, G. V., 1989. Water quality for subsurface injection. In: G. V. Chilingarian, J. O. Robertson, and S. Kumar (Editors), Surface Operations in Petroleum Production, Amsterdam: Elsevier, pp. 39-371.
180. Yanat'eva, O. K., 1954. About physical-chemical characteristics of some carbonate rocks. Dokl. Akad. Nauk. SSSR, 96(4): 777-779.
181. APHA, 1980. Standard Methods for the Examination of Water, Sewage, and Industrial Wastes, 15th ed. New York, NY: American Public Health Association, 1134 pp.
182. API, 1951. Investigation of Behavior of Oil-Water Mixture in Separators. New York, NY: American Petroleum Institute.
183. API, 1963. Waste water containing oil. In: Manual on Disposal of Refinery Wastes, Vol. 1, 7th ed. New York, NY: American Petroleum Institute.
184. API, 1965. Recommended Practice for Biological Analysis of Water Flood Injection Water, RP 38, 2nd ed. New York, NY: American Petroleum Institute, 7 pp.
185. API, 1968. Recommended Practice for the Analysis of Oil Field Waters, RP-45, 2nd ed. New York, NY: American Petroleum Institute, 49 pp.
186. ASTM, 1982a. Annual Book of ASTM Standards, Part 10. Philadelphia, PA: American Society for Testing and Materials, 1214 pp.
187. ASTM, 1982b. Annual Book of ASTM Standards, Part 31. Philadelphia, PA: American Society for Testing and Materials, 1554 pp.
188. Amstutz, R. W., 1956. Operating problems in waterflood water treatment. API Drilling Prod. Pract., 150-162.
189. Baker, O. E., 1958. Current research and future developments of flooding water quality control. In: A Digest of the Proceedings of the Short Course-Water Quality Control for Subsurface Injection. Norman, OK: University of Oklahoma.
190. Barkman, J. H. and Davidson, D. H., 1972. Measuring water quality and predicting well impairment. J. Petrol. Technol., 24(July): 865-872.
191. Barnard, P., Jr., 1959. A new method of restoring water injection capacity to well plugged with iron sulfide and free sulfur. J. Petrol. Technol., 11(Sept.): 12-14.
192. Baumann, E. R., 1965. Diatomite filters for municipal use. J. Am. Water Works Assoc., 57: 157-180.
193. Baumann, E. R. and LaFrenz, R. L., 1963. Optimum economical design for municipal diatomite filter plants. J. Am. Water Works Assoc., 55: 48-58.
194. Bell, G. R., 1962. Design criteria for diatomite filters. J. Am. Water Works Assoc., 54: 1241-1256.
195. Black, A. P., 1948. The chemistry of water coagulation. Water Sewage Works, 95: 142-144.
196. Black, A. P., 1960. Basic mechanisms of coagulation. J. Am. Water Works Assoc., 52: 492-501.
197. Brunsmann, J. J., Cornelissen, J. and Eilers, H., 1962. Improved oil separation in gravity separators. J. Water Pollution Control Fed., 34(1): 44-45.
198. Burke, P. A. and Hausler, R. H., 1985. Assessment of CO2 corrosion in Cotton Valley limestone trend. Advances in CO2 Corrosion (NACE), 2: 133.
199. Cerini, W. F., Battles, W. R., and Jones, P. H., 1946. Some factors influencing the plugging characteristics of an oilwell injection water. Trans. AIME. Pet. Div., 165: 52-63.
200. Chambers, J. B. and Hillegeist, R. B., 1975. Producing sour oil and gas in the Jay field. J. Petrol. Technol., June: 701.
201. Chiligarian, G. V., Robertson, J. O. Jr., and Kumar, S., 1989. Surface Operations in Petroleum Production, II. Amsterdam: Elsevier Science Publishers: 562 pp.
202. Collins, A. G. and Wright, C. C., 1982. Enhanced Oil Recovery Injection Waters. U.S. Dep. Energy, DOE/BETC/RI-82/5: 81 pp.
203. Conley, W. R., Jr., 1965. Integration of the clarification process. J. Am. Water Works Assoc., 57: 1333-1345.
204. Crawford, P. B., 1966. Importance of chemical composition of the injected water on effective permeability. Prod. Mon., 30(June): 11-12.
205. Gatzke, L. K. and Hausler, R. H., 1984. A novel correlation of tubing corrosion rates in deep, hot gas wells with water and gas production rates. Advances in CO2 Corrosion (NACE), 1: 87.
206. Grim, R. E., 1962. Applied Clay Mineralogy. New York, NY: McGraw-Hill, 422 pp.
207. Harris, J. O., 1960. Soil microorganisms in relation to cathodically protected pipe. Corrosion, 16: 441-448.
208. Hewitt, C. H., 1963. Analytical techniques for recognizing water-sensitive reservoir rocks. J. Petrol. Technol., 15(8): 813-818.
209. Hockaday, D. E., 1958. Water quality requirements in oilfield fluid injection operations. In: A Digest of Proceedings of Short Course-Water Quality Control for Subsurface Injection. Norman, OK: University of Oklahoma.
210. Hudson, H. E., Jr., 1965. Physical aspects of flocculation. J. Am. Water Works Assoc., 57: 885-892.
211. Ingersoll, A. C., 1951. The fundamentals and performance of gravity separation-a literature review. Proc. Am. Pet. Inst., 31 M(III). Also in: Pet. Refiner, 30(6): 106-118.
212. Johnston, J. L. and Campbell, J. M., 1957. Correlation of Factors Affecting the Gravity Separation of Crude Oil-Water Mixtures. SPE AIME Fall Meet, Los Angeles, CA, Oct. 17.
213. Jones, F. O., Jr., 1964. Influence of chemical composition of water on clay blocking of permeability. J. Petrol. Technol., 16(4): 441-446.
214. Jones, L. W., 1988. Corrosion and Water Technology. Tulsa, OK: OGCI Publications, 202 pp.
215. Jones, F. O., Jr. and Neil, J. D., 1960. The Effect of Clay Blocking and Low Permeability on Formation Testing. SPE AIME Fall Meet, Denver, CO, Oct. 2-5, Pap. 1515-G.
216. Katz, W. J., 1958. Treat wastes with dissolved air. Pet. Refiner, 37(5): 211-213.
217. Katz, W. J., 1960. Dissolved-air flotation as applied to the treatment of oil production water and of refinery wastes. API Drilling Prod. Pract., 140-144.
218. Langelier, W. F., 1946. Chemical equilibria in water treatment. J. Am. Water Works Assoc., 38: 169-178.
219. Langnes, G. L., Robertson, J. O., Jr., and Chilingar, G. V. 1972. Secondary Recovery and Carbonate Reservoirs. New York, NY: American Elsevier Publishing Company, Inc, 304 pp.
220. Lewelling, H. and Kaplan, M., 1959. What to do about salt water. Pet. Eng., 31(7): 19-24.
221. Matheney, S. L., Jr., 1980. Huge seawater plant performs as planned. Oil Gas J., 78(July 7): 87-88, 92.
222. Milton, C., 1966. " Kansite" -Mackinawite, FeS. Corrosion, 22: 191-193.
223. Mitchell, R. W. and Finch, T. M., 1978. Water quality aspects of the North Sea injection water. J. Petrol. Technol., 33(6): 1141-1152.
224. Moore, J. W., 1960. Clay mineralogy problems in oil recovery, Part I, I. Pet. Eng., 32(2): 40-47; 32(3): 78-101.
225. Morris, V. C., Aune, Q. A., and Gates, F. I., 1959. Clay in Petroleum Reservoir Rocks: Its Effect on Permeability, with Particular Reference to Tejon-Grapevine Area, Kern County, CA. U.S. Bur. Mines. Rep. Invest., 5425: 65 pp.
226. NACE, 1973. Methods for Determining Water Quality for Subsurface Injection Using Membrane Filters. NACE Standard TM 01-73. Houston, TX: National Association of Corrosion Engineers.
227. NACE, 1975. Preparation and Installation of Corrosion Coupons and Interpretation of Test Data in Oil Production Practice. NACE Recommended Practice 07-75. Houston, TX: National Association of Corrosion Engineers.
228. O'Melia, C. R. and Crapps, D. K., 1964. Some chemical aspects of rapid sand filtration. J. Am. Water Works Assoc., 56: 1326-1343.
229. Pope, R., 1948. Application of cathodic protection. In: H. H. Uhlig (Editor), The Corrosion Handbook. New York, NY: Wiley, pp. 935-950.
230. Postgate, J. R., 1979. The Sulphate-Reducing Bacteria. Cambridge: Cambridge University Press, 151 pp.
231. Riddick, T. M., 1964. Role of the zeta potential in coagulation involving hydrous oxides. Technical Association of the Pulp and Paper Industry, 47: 171-179.
232. Rieke, H. H., Chilingarian, C. V., 1974. Compaction of Argillaceous Sediments. Elsevier, Armsterdam (474pp.).
233. Schaschl, E. and Marsh, G. A., 1963. Some new views on soil corrosion. Mater. Prot., 2(2): 8-17.
234. Simonsen, R. N., 1962. Oil removal by air flotation at Sohio Refinery. Oil Gas J., 60(21): 146-154.
235. Spencer, O. I. and Harding, R. W., 1959. Secondary Recovery of Oil, 2nd ed. University Park, PA: Pennsylvania State University, 516 pp.
236. Stiff, H. A. and Davis, L. E., 1952. A method for determining the tendency of oilfield water to deposit calcium carbonate. Trans. AIME, Pet. Div., 195: 213-216.
237. Stumm, W. and Morgan, J. J., 1962. Chemical aspects of coagulation. J. Am. Water Works Assoc., 54: 971-974.
238. Udwin, E., 1971. High-rate water filtration. Plant Eng., 25(Sept. 30) (Oct. 28): 56-7.
239. Unz, M., 1960. Insulating properties of cement mortar coatings. Corrosion, 16(7): 343-353.
240. Von Engelhardt, W. and Tunn, W. L., 1955. The flow of fluids through sandstone. Ill. Geol. Surv. Circ., 194: 16 pp. (translated by P. A. Witherspoon). Also in: Heidelb. Beitr. Mineral. Petrogr., 1954, 4: 12-25.
241. Wright, C. C., 1963. Rating water quality and corrosion control in waterfloods. Oil Gas J., 61(20): 154-157.
242. Wright, C. C., 1965. Chemical compatibility. Prod. Mon., 29(6): 19-21.
243. Wright, C. C., 1972. Corrosion control in large-volume pumping brine wells. Mater. Prot. Perform., 11: 23-26.
244. Wright, C. C. and Chilingarian, G. V., 1989. Water quality for subsurface injection. In: G. V. Chilingarian, J. O. Robertson, Jr., and S. Kumar (Editors), Surface Operation in Petroleum Production, II, Developments in Petroleum Science, Amsterdam: Elsevier, pp. 119-171.
245. Wright, C. C. and Cloninger, D. K., 1963. The Membrane Filter-a Good Tool for Water Quality Testing. Western Regional NACE Meet, Anaheim, CA, Sept. 26: 36 pp.
246. Wright, C. C. and Davies, D. W., 1966. The disposal of oilfield wastewater. Prod. Mon., 30(9): 14-17; 22-24.
247. Allen, G. G., 1977. Drilling Fluids. Baroid Petroleum Services, p. 16.
248. Bennett, L. H., 1978. Economic Effects of Metallic Corrosion in the United States. A Report to Congress by the National Bureau of Standards (National Bureau of Standards, Gaithersburg, MD).
249. Chilingarian, G. V. and Vorabutr, P., 1983. Drilling and Drilling Fluids. Amsterdam: Elsevier Science Publishers, 767 pp.
250. Cron, C. J. and Marsh, G. A., 1983. Overview of economics and engineering aspect of corrosion in oil and gas production. J. Petrol. Thechnol., June: 1033-1041.
251. Koch, G. H., Brongers, M. P. H., Thompson, N. G., Virmani, Y. P., and Payer, J. H., 2002. Corrosion Costs and Preventive Strategies in the United States. Publication No. FHWA-RD-01-156: 1-11.
252. Magcobar Services, 1972. Drilling Fluid Engineering Manual: Houston TX, 200 pp.
253. Ross, T. and Lott, N., 2001. Billion Dollar U.S. Weather Disasters, 1980-2001. Asheville, NC: National Climatic Data Center, National Oceanic and Atmospheric Administration.
254. www.corrosioncost.com
255. www.corrosionsource.com
256. www.cctechnologies.com
257. www.stainlessrebar.com
258. Cron, C. J. and Marsh, G. A., 1983. Overview of economic and engi neering aspect of corrosion in oil and gas production. J. Petrol. Technol., June: 1033-1041.
259. Cron, C. J. and Marsh, G. A., 1983. Overview of economic and engineering aspect of corrosion in oil and gas production. J. Petrol. Technol., June: 1033-1041.
260. Britton, J., 2001. Impressed current retrofits on offshore platform-The good, the bad and the ugly. Corrosion, Paper 01505.
261. Britton, J., 2004. Early coating failure on offshore platform. Corrosion, Paper 04003.
262. Brown, T. H. Jr., 2004. Designing Protective Coating Systems for Offshore Oil and Gas Platforms. Ameron International. www.ameroncoating.com/techcenter/doc/designingprotectivecoatingsystems.pdf
263. Buffington, S., 2006. Offshore Structures. U.S. Department of Interior, Offshore Minerals Management, www.mms.gov.
264. Cron, C. J. and Marsh, G. A., 1983. Overview of economic and engineering aspect of corrosion in oil and gas production. J. Petrol. Technol., June: 1033-1041.
265. Davis, J. G., Doremus, G. L., and Graham, W. F., 1972. The influence of environment on corrosion and cathodic protection. J. Petrol. Technol., March: 323-328.
266. Davis, J. R., 2000. Corrosion: Understanding the Basics. Materials Park: ASM International.
267. Michels, H. T. and Powell C. A., 2006. Alloys of Copper and Nickel for Splash Zone Sheathing of Marine Structures. Copper Development Association Inc. http://www.copper.org/applications/cuni/txt-cuni.html
268. Rasmuseen, S. N., 2005. Corrosion Protection of Offshore Structures. www.hempel.com/enhem/corrosion-protection.html
269. Ridge, M. W., 1983. Development of drilling structure. In: R. S. Hall (Editor), Drilling and Producing Offshore, Tulsa, OK: PennWell Books, PennWell Publishing Company.
270. Larsen, G. and Chilingar, G. V., 1967. Diagenesis of Sediments, Development in Sedimentology 8, Amsterdam: Elsevier, 551 pp.
271. Chilingarian, G. V. and Vorabutr, P., 1981. Drilling and Drilling Fluids, New York, NY: Elsevier Science Pub. Co., Inc., 802 pp.
272. Videla, H. A., 1996. Manual of Biocorrosion. CRC Press, Inc., Lewis Publishers: 273 pp.
273. Stiff, H. A. and Davis, L. E., 1952. A method for predicting the tendency of oilfield waters to deposit calcium carbonate. Petroleum Trans., AIME, 195: 213.
274. Chilingarian G. V., Wolf, K. H., and Allen D. R. Introduction. In: G. V. Chilingarian and K. H. Wolf, 1975. Compaction of Coarse Grained Sediments, 1. Developments in Sedimentology ISA, Amsterdam: Elsevier, 552 pp.
275. Jones, L. W, 1988. Corrosion and Water Technology for Petroleum Producers. Tulsa, OK: Oil and Gas Consultants International, Inc. (OGCI Publications), 202 pp.
276. Deming, H. G., 1946. Fundamental Chemistry. London: John Wiley & Sons, 756 pp.
277. Chilingarian, G. V. and Varabutr, R., 1981. Drilling and Drilling Fluids. Amsterdam: Elsevier, 767 pp.
278. Deming, H. G., 1946. Fundamental Chemistry. John Wiley & Sons, Inc: 756 pp.
279. Langnes, G. L., Robertson, J. O. Jr., and Chilingar, G. V., 1972. Secondary Recovery and Carbonate Reservoirs. New York, NY: Am. Elsevier Publ. Co, Inc., 304 pp.