Material science of polymers for engineers: Third edition

Material Science of Polymers for Engineers: Third Edition

Volumn , Issue , 2012, Pages 1-595

  Osswald, Tim A ^a   Menges, Georg ^b  

^a UNIVERSITY OF WISCONSIN MADISON   (United States)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84905782197     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.3139/9781569905241     Document Type: Book

References (354)

1. Calhoun, A., and Peacock, A., Polymer Chemistry - Properties and Applications, Hanser Publishers, Munich (2006).
2. Termonia, Y., and Smith, P., High Modulus Polymers, A. E. Zachariades, and R. S. Porter, Eds., Marcel Dekker Inc., New York, (1988).
3. Ehrenstein, G. W., Faserverbund-Kunststoffe, Hanser Publishers, Munich (2006).
4. Naranjo, A, Noriega, M., Osswald, T. A., Roldán, A. and Sierra, J., Plastics Testing and Characterization - Industrial Applications, Hanser Verlag, München, (2006).
5. Sánchez, K., Stöckl, K., Perdomo, A., and Osswald, T. A., Journal of Plastics Technology, accepted for publication (2012).
6. Giersch, U., and Kubisch, U., Gummi, Die Elastische Faszination, Nicolai, Berlin (1995).
7. Stern, H. J., Rubber: Natural and Synthetic, Maclaren and Sons LDT, London, (1967).
8. de la Condamine, C. M., Relation Abregee D'un Voyage Fait Dans l'interieur de l'Amerique Meridionale, Academie des Sciences, Paris, (1745).
9. DuBois, J. H., Plastics History U.S.A., Cahners Publishing Co., Inc., Boston, (1972).
10. nd ed., John Wiley & Sons, New York, (2006).
11. McPherson, A. T., and Klemin, A., Engineering Uses of Rubber, Reinhold Publishing Corporation, New York, (1956).
12. Kaufman, M., The Chemistry and Industrial Production of Polyvinyl Chloride, Gordon and Beach, New York, (1969).
13. Levi, P., If This is a Man, Abacus, 1995.
14. Tschimmel, U., Die Zentausend-Dollar-Idee, ECON Verlag, Duesseldorf, (1989).
15. Sonntag, R., Kunststoffe, 75, 4, (1985).
16. Herrmann, H., Kunststoffe, 75, 2, (1985).
17. Regnault, H. V., von Liebig, J., Ann. Chemie, 14, 22 (1835).
18. nd ed., Hanser Publishers, Munich, (1993).
19. Utracki, L. A., Polym. Eng. Sci., 35, 1, 2 (1995).
20. Schmachtenberg, E., LKT Lecture Notes, Erlangen, Germany (2009).
21. Berry, G.C., and Fox, T.G., Adv. Polymer Sci., 5, 261, (1968).
22. Staudinger, H., and Huer, W., Ber. der Deutsch. Chem Gesell., 63, 222, (1930).
23. Crowder, M.L., Ogale, A.M., Moore, E.R., and Dalke, B.D., Polym. Eng. Sci., 34, 19, 1497 (1994).
24. Domininghaus, H., Elsner, P., Eyerer, P., and Hirth, T., Kunststoffe - Eigenschaften und Anwendungen, Springer, Munich, (2012).
25. Aklonis, J.J., and MacKnight, W.J., Introduction to Polymer Viscoelasticity, John Wiley and Sons, New York, (1983).
26. Rosen, S.L., Fundamental Principles of Polymeric Materials, John Wiley & Sons, Inc., New York, (1993).
27. th ed., Elsevier, Amsterdam, (2009).
28. Zweifel, H., Plastics Additives Handbook, Hanser Publishers, Munich, (2009).
29. Klempner, D., and Sendijarevic, V., Handbook of Polymeric Foams and Foam Technology, Hanser Publishers, Munich, (2004).
30. nd ed., Pergamon Press, Oxford, (1987).
31. Ehrenstein, G. W., Riedel, G., and Trawiel, P., Thermal Analysis of Plastics, Hanser Publishers, Munich, (2004).
32. Godovsky, Y. K., Thermophysical Properties of Polymers, Springer-Verlag, Berlin, (1992).
33. th ed., Elsevier, Amsterdam, (2009).
34. Knappe, W., Kunststoffe, 66, 5, 297 (1976).
35. Dietz, W., Kunststoffe, 66, 3, 161, (1976)
36. Knappe, W., Adv. Polym. Sci., 7, 477, (1971).
37. Fischer, F., Gummi - Asbest - Kunststoffe, 32, 12, 922 (1979).
38. Maxwell, J. C., Electricity and Magnetism, Clarendon Press, Oxford, (1873).
39. Meredith, R. E., and Tobias, C. W., J. Appl. Phys., 31, 1270, (1960).
40. Araujo, F. F. T., and Rosenberg, H. M., J. Phys. D:Appl. Phys., 9, 665, (1976).
41. Menges, G., Haberstroh, E., Michaeli, W., and Schmachtenberg, E., Menges Werkstoffkunde Kunststoffe, Hanser Publishers, Munich, (2011).
42. Janeschitz-Kriegl, H., Wippel, H., Paulik, Ch., and Eder, G., Colloid Polym. Sci., 271, 1107, (1993).
43. Wu, C. H., Eder, G., and Janeschitz-Kriegl, H., Colloid Polym. Sci., 271, 1116, (1993).
44. nd ed, John Wiley & Sons, New York, (2006).
45. Morrison, F., Understanding Rheology, Oxford University Press, New York, (2001).
46. Dealy, J. M., and Larson, R. G., Structure and Rheology of Molten Polymers, Hanser Publishers, Munich, (2006).
47. nd ed., Oxford University Press, New York, (2000).
48. nd ed., Vol.1, John Wiley & Sons, New York, (1987).
49. Giacomin, A. J., Osswald, T. A., and Rudolph, N. M., Understanding Plastics Rheology, Hanser Publishers, Munich, (2012).
50. Bird, R. B., and J. M. Wiest, Annu. Rev. Fluid Mech., 27, 169, (1995).
51. Tucker III, C. L., Fundamentals of Computer Modeling for Polymer Processing, Hanser Publishers, Munich, (1989).
52. Osswald, T. A., Understanding Polymer Processing, Hanser Publishers, Munich, (2010).
53. Laun, H. M., Rheol. Acta, 17, 1, (1978).
54. Agassant, J.-F., Avenas, P., Sergent, J.-Ph., and Carreau, P. J., Polymer Processing: Principles and Modeling, Hanser Publishers, Munich, (1991).
55. Vinogradov, G. V., Malkin, A. Y., Yanovskii, Y. G., Borisenkova, E. K., Yarlykov, B.V., and Berezhnaya, G. V., J. Polym. Sci. Part A-2, 10, 1061, (1972).
56. Vlachopoulos, J., and Alam, M., Polym. Eng. Sci., 12, 184, (1972).
57. Hatzikiriakos, S. G., and Dealy, J. M., ANTEC Tech. Papers, 37, 2311 (1991).
58. Spencer, R. S., and Dillon, R. D., J. Colloid Inter. Sci., 3, 163, (1947).
59. Vinogradov, G. V., Malkin, A. Y., Yanovskii, Y. G., Borisenkova, E. K., Yarlykov, B. V., and Berezhnaya, G. V., J. Polym. Sci. Part A-2, 10, 1061, (1972).
60. Hatzikiriakos, S. G., and Dealy, J. M., J. Rheol., 36, 845, (1992).
61. Denn, M. M., Annu. Rev. Fluid Mech., 22, 13, (1990).
62. Ostwald, W., Kolloid-Z., 36, 99, (1925).
63. de Waale, A., Oil and Color Chem. Assoc. Journal, 6, 33, (1923).
64. Carreau, P. J., Ph.D. Thesis, University of Wisconsin-Madison, USA, (1968).
65. Yasuda, K., Armstrong, R. C., and Cohen, R. E., Rheol. Acta, 20, 163, (1981).
66. Menges, G., Wortberg, F., and Michaeli, W., Kunststoffe, 68, 71, (1978).
67. Trouton, F. T., Proc. Roy. Soc., A77, (1906).
68. Münstedt, H., Rheol. Acta, 14, 1077, 92, (1975).
69. Han, C. D. and Lem, K. W., J. Appl. Polym. Sci., 29, 1879, (1984).
70. Castro, J. M. and Macosko, C. W., AIChe J., 28, 250, (1982).
71. Castro, J. M., Perry, S. J., and Macosko, C. W., Polymer Comm., 25, 82, (1984).
72. Einstein, A., Ann. Physik, 19, 549, (1906).
73. Guth, E., and Simha, R., Kolloid-Zeitschrift, 74, 266, (1936).
74. Guth, E., Proceedings of the American Physical Society, (1937); Physical Review, 53, 321, (1938).
75. Batchelor, G. K., Annu. Rev. Fluid Mech., 6, 227, (1974).
76. Geisbüsch, P., Ph.D. Thesis, IKV, RWTH-Aachen, Germany, (1980).
77. Gupta, R. K., Flow and Rheology in Polymer Composites Manufacturing, Ed. S. G. Advani, Elsevier, Amsterdam, (1994).
78. Milliken, W. J., and Powell, R. L., Flow and Rheology in Polymer Composites Manufacturing, Ed. S. G. Advani, Elsevier, Amsterdam, (1994).
79. A. J. Giacomin, R. B. Bird, L. M. Johnson, and A. W. Mix, J. Non-Newton. Fluid Mech., 166, 1081-1099, (2012).
80. Phan-Thien, N., Understanding Viscoelasticity, Springer Verlag, Berlin, (2010).
81. Osswald, T. A., and Hernández-Ortiz, Polymer Processing - Modeling and Simulation, Hanser Publishers, Munich, (2006).
82. Dietsche, L., and Dooley, J., SPE ANTEC, 53, 188, (1995).
83. Dooley, J., and Hughes, K., SPE ANTEC, 53, 69, (1995).
84. Holmes, L., Favero, J., and Osswald, T. A., Polym. Eng. Sci, DOI 10.1002/pen (2012).
85. Baaijens, J. P. W., Evaluation of Constitutive Equations for Polymer Melts and Solutions in Complex Flows, Ph.D. Thesis, Eindhoven University of Technology, Eindhoven, The Netherlands, (1994).
86. Luo, X.-L., and Mitsoulis, E., J. Rheol., 33, 1307, (1989).
87. Lodge, A. S., Elastic Liquids, Academic Press, London, (1960).
88. Kaye, A., Non-Newtonian Flow in Incompressible Fluids, CoA Note No.134, The College of Aeronautics, Cranfield, (1962).
89. Bernstein, B., Kearsley, E., and Zapas, L., Trans. Soc. Rheol., 7, 391, (1963).
90. Wagner, M. H., Rheol. Acta, 18, 33, (1979).
91. Papanastasiou, A. C., Scriven, L. E., and Macosko, C. W., J. Rheol., 27, 387, (1983).
92. Orbey, N., and Dealy, J. M., Polym. Eng. Sci., 24, 511, (1984).
93. ASTM, 8.01, Plastics (I), ASTM, Philadelphia, (1994).
94. Hagen, G. H. L., Annalen der Physik, 46, 423, (1839).
95. Poiseuille, L. J., Comptes Rendus 11, 961, (1840).
96. Dealy, J. M., Rheometers for Molten Plastics, Van Nostrand Reinhold Company, New York, (1982).
97. Bagley, E. B., J. Appl. Phys., 28, 624, (1957).
98. Rabinowitsch, B., Z. Phys. Chem., 145, 1, (1929).
99. Schümmer, P., and Worthoff, R.H., Chem. Eng. Sci., 38, 759, (1978).
100. Meissner, J., Rheol. Acta, 10, 230, (1971).
101. Chatrei, Sh., Macosko, C.W., and Winter, H. H., J. Rheol., 25, 433, (1981).
102. Macosko, C. W., Rheology: Principles, Measurements and Applications, VCH, (1994).
103. Zisman, W. A., Ind. Eng. Chem., 55, 19, (1963).
104. ASTM, 8.02, Plastics (II), ASTM, Philadelphia, (1994).
105. Wu, S., J. Macromol. Sci. - Revs. Macromol. Chem., C10, 1, (1974).
106. Owens, D. K. and Wendt, R. C., J. Appl. Polymer Sci., 13, 1741, (1969).
107. Hildebrand, J. and Scott, R. L., The Solubility of Non-Electrolytes, 3rd ed., Reinhold Publishing Co., New York, (1949).
108. th ed., Elsevier, Amsterdam, (2009).
109. Reichstein, H., Ph.D. thesis, IKV, RWTH-Aachen, (1982).
110. nd ed., John Wiley & Sons, New York, (2006).
111. Rauwendaal, C., Mixing in Polymer Processing, Marcel Dekker, Inc., New York, (1991).
112. nd ed., Injection Molding Handbook, Hanser Publishers, Munich, (2007).
113. Menges, G., and Predöhl, W., Plastverarbeiter, 20, 79, (1969).
114. Menges, G., and Predöhl, W., Plastverarbeiter, 20, 188, (1969).
115. Scott, C. E., and Macosko, C. W., Polymer Bulletin, 26, 341, (1991).
116. Gramann, P. J., Stradins, L., and Osswald, T. A., Intern. Polym. Proc., 8, 287, (1993).
117. Osswald, T. A., Understanding Polymer Processing, Hanser Publishers, Munich, (2010).
118. Erwin, L., Polym. Eng. & Sci., 18, 572, (1978).
119. Erwin, L., Polym. Eng. & Sci., 18, 738, (1978).
120. Ng, K. Y., M. S. Thesis, University of Wisconsin-Madison, (1979).
121. Tadmor, Z., Ind. Eng. Fundam., 15, 346, (1976).
122. Cheng, J., and Manas-Zloczower, I., Intern. Polym. Proc., 5, 178, (1990).
123. Grace, H. P., Chem. Eng. Commun., 14, 225, (1982).
124. Cox, R. G., J. Fluid Mech., 37, 3, 601-623, (1969).
125. Bentley, B. J. and Leal, L. G., J. Fluid Mech., 167, 241-283, (1986).
126. Stone, H. A. and Leal, L. G., J. Fluid Mech., 198, 399-427, (1989).
127. Biswas, A., and Osswald, T. A., unpublished research, (1994).
128. Gramann, P. J., M. S. Thesis, University of Wisconsin-Madison, (1991).
129. Manas-Zloczower, I., Nir, A., and Tadmor, Z., Rubber Chemistry and Technology, 55, 1250, (1983).
130. Boonstra, B. B., and Medalia, A. I., Rubber Age, March and April, (1963).
131. th ed., Hanser Publishers, Munich, (2001).
132. Menges, G., and Harms, E., Kautschuk und Gummi, Kunststoffe, 25, 469, (1972).
133. Rauwendaal, C., SPE ANTEC 39, 2232, (1993).
134. nd ed., Ed. I. Manas-Zloczower, Hanser Publishers, Munich, (2009).
135. nd ed., Ed. I. Manas-Zloczower, Hanser Publishers, Munich, (2009).
136. Lim, S. and White, J. L., Intern. Polym. Proc., 8, 119, (1993).
137. Lim, S. and White, J. L., Intern. Polym. Proc., 9, 33, (1994).
138. nd ed., John Wiley & Sons, New York, (2004).
139. Erwin, L., Polym. Eng. & Sci., 18, 1044, (1978).
140. Suetsugu, Y., Intern. Polym. Proc., 5, 184, (1990).
141. Greener, J., Polym. Eng. Sci., 26, 886 (1986).
142. Michaeli, W., and Lauterbach, M., Kunststoffe, 79, 852 (1989).
143. Stevenson, J. F., Polym. Eng. Sci., 18, 577 (1978).
144. Naranjo, A, Noriega, M., Osswald, T. A., Roldán, A. and Sierra, J., Plastics Testing and Characterization - Industrial Applications, Hanser Publishers, Munich, (2006).
145. Anturkar, N. R., and Co, A., J. Non-Newtonian Fluid Mech., 28, 287 (1988).
146. Menges, G., Einführung in die Kunststoffverarbeitung, Hanser Publishers, Munich (1986).
147. Rosato, D. V., Blow Molding Handbook, Hanser Publishers, Munich (1989).
148. Modern Plastics Encyclopedia, 53, McGraw-Hill, New York (1976).
149. Tadmor, Z., and Bird, R. B., Polym. Eng. Sci, 14, 124 (1973).
150. Denton, D. L, The Mechanical Properties of an SMC-R50 Composite, Owens-Corning Fiberglas Corporation (1979).
151. Shutov, F. A., Integral/Structural Polymer Foams, Springer-Verlag, Berlin (1986).
152. Crawford, R. J., Rotational Molding of Plastics, Research Studies Press, Somerset (1992).
153. Bellehumeur, C. T., and Vlachopoulos, J., SPE 56th Antec, (1998).
154. Mascia, L., The Role of Additives in Plastics, John Wiley & Sons, New York, (1974).
155. Hildebrand, J. and Scott, R. L., The Solubility of Non-Electrolytes, 3rd ed., Reinhold Publishing Co., New York, (1949).
156. nd. ed., John Wiley & Sons, Inc., New York, (1993).
157. Janssen, J. M. H., Ph. D. Thesis, Eindhoven University of Technology, The Netherlands, (1993).
158. th ed., Elsevier, Amsterdam, (2009).
159. Osswald, T. A., and Hernández, J. P., Polymer Processing - Modeling and Simulation, Hanser Publishers, Munich, (2006).
160. Hele-Shaw, H. S., Proc. Roy. Inst., 16, 49 (1899).
161. Woebken, W., Kunststoffe, 51, 547, (1961).
162. Menges, G., and Wübken, G., SPE, 31st ANTEC, (1973).
163. Wimberger-Friedl, R., Polym. Eng. Sci., 30, 813, (1990).
164. Wimberger-Friedl, R., Ph. D. Thesis, Eindhoven University of Technology, The Netherlands, (1991).
165. Menges, G., and Geisbüsch, P., Colloid & Polymer Science, 260, 73, (1982).
166. Bay, R. S., and Tucker III, C. L., Polym. Comp., 13, 317, (1992a).
167. Bay, R. S., and Tucker III, C. L., Polym. Comp., 13, 322, (1992b).
168. Menges, G., Schacht, T., Becker, H., and Ott, S., Intern. Polym. Proc., 2, 77, (1987).
169. Leibfried, D., Ph.D. Thesis, IKV, RWTH-Aachen, Germany, (1970).
170. Wübken, G., Ph.D. Thesis, IKV, RWTH-Aachen, (1974).
171. Mavrides, H., Hrymak, A. N., and Vlachopoulos, J., Polym. Eng. Sci., 26, 449, (1986).
172. Mavrides, H., Hrymak, A. N., and Vlachopoulos, J., J. Rheol., 32, 639, (1988).
173. Barone, M. R., and Caulk, D. A., J. Appl. Mech., 53, 361, (1986).
174. Lee, C.-C., Folgar, F., and Tucker III, C. L., J. Eng. Ind., 106, 114, (1984).
175. Jackson, W. C., Advani, S. G., and Tucker III, C. L., J. Comp. Mat., 20, 539, (1986).
176. Advani, S. G., Ph.D. Thesis, University of Illinois at Urbana-Champaign, (1987).
177. Barone, M. R., and Osswald, T. A., Polym. Comp., 9, 158, (1988).
178. Jeffery, G. B., Proc. Roy. Soc., A102, 161, (1922).
179. Burgers, J. M., Verh. K. Akad. Wet., 16, 8, (1938).
180. Folgar, F. P., Ph.D. Thesis, University of Illinois at Urbana-Champaign, (1983).
181. Folgar, F. P., and Tucker III, C. L., J. Reinf. Plast. Comp., 3, 98, (1984).
182. Advani, S. G. and Tucker III, C. L., Polym. Comp., 11, 164, (1990).
183. Advani, S. G. and Tucker III, C. L., J. Rheol., 31, 751 (1987).
184. Folgar, F. and Tucker III, C. L., J. Reinf. Plast. Comp., 3, 98 (1983).
185. Jackson, W. C., Advani, S. G., and Tucker III, C. L., J. Comp. Mat., 20, 539, (1986).
186. Cintra, J. S., and Tucker III, C. L., J. Rheol., 39:6, 1095 (1995).
187. Phelps, J. H. and Tucker III, C. L., Journal of Non-Newtonian Fluid Mechanics, 156, 165-176, (2009).
188. Crochet, M. J., Dupret, F., and Verleye, V., Flow and Rheology in Polymer Composites Manufacturing, Ed. S. G. Advani, Elsevier, Amsterdam, (1994).
189. Hele-Shaw, H. S., Proc. Roy. Inst., 16, 49, (1899).
190. Chen, C. Y., and Tucker III, C. L., J. Reinf. Compos., 3, 120, (1984).
191. Osswald, T. A., and Tucker III, C. L., Int. Polym. Process., 5, 79, (1990).
192. nd Antec, (1994).
193. Tucker III, C. L., and Advani, S. G., Flow and Rheology in Polymer Composites Manufacturing, Ed. Advani, Elsevier, Amsterdam, (1994).
194. Thieltges, H.-P., Ph.D. Thesis, RWTH-Aachen, Germany, (1992).
195. Bailey, R., and Kraft, H., Intern. Polym. Proc., 2, 94, (1987).
196. Loken, T., M. S. Thesis, University of Wisconsin-Madison, Madison, USA, (2011)
197. Mittal, R. K., Gupta, V. B., and Sharma, P. K., Composites Sciences and Tech., 31, 295, (1988).
198. Osswald, T. A., Ph.D. Thesis, University of Illinois at Urbana-Champaign, (1986).
199. th ed., Elsevier, Amsterdam, (2009).
200. Ehrenstein, G. W., Polymeric Materials: Structure, Properties and Applications, Hanser Publishers, Munich, (2001).
201. Menges, G., and Winkel, E., Kunststoffe, 72, 2, 91 (1982).
202. nd ed., John Wiley & Sons, New York, (2006).
203. Avrami, M., J. Chem. Phys., 7, 1103, (1939).
204. Sharples, A., Polymer Science, A Materials Science Handbook, Chapter 4, A. D. Jenkins, Ed., North Holland Publishing Company, Amsterdam, (1972).
205. Eder, G., and Janeschitz-Kriegl, H., Material Science and Technology, Vol. 18., Ed. H. E. H. Meijer, Verlag Chemie, Weinheim, (1995).
206. Brandrup, J., and Immergut, E. H., Polymer Handbook, John Wiley & Sons, New York, (1975).
207. Krobath, G., Liedauer, S., and Janeschitz-Kriegl, H., Polymer Bulletin, 14, 1, (1985).
208. Stefan, J., Ann. Phys. and Chem., N.F., 42, 269, (1891).
209. Eder, G., and Janeschitz-Kriegl, H., Polymer Bulletin, 11, 93, (1984).
210. Janeschitz-Kriegl, H., and Krobath, G., Intern. Polym. Process., 3, 175, (1988).
211. Randell, D. R., Radiation Curing Polymers, Burlington House, London, (1987).
212. Palmese, G. R., Andersen, O., and Karbhari, V. M., Advanced Composites X: Proceedings of the 10th Annual ASM/ESD Advance Composites Conference, Dearborn, MI, ASM International, Material Park, (1994).
213. Macosco, C. W., RIM Fundamentals of Reaction Injection Molding, Hanser Publishers, Munich, (1989).
214. Enns, J. B. and Gillham, J. K., "Time-Temperature-Transformation (TTT) Cure Diagram:Modeling the Cure Behavior of Thermosets", J. Appl. Polym. Sci., 28, 2567 (1983).
215. Kamal, M. R., "Thermoset Characterization for Moldability Analysis", Polym. Eng. Sci., 14 (3), 231 (1974).
216. Rabinowitch, E., Trans. Faraday Soc., 33, 1225 (1937).
217. Havlicek, I. and Dusek, K., in Crosslinked Epoxies, 417, B. Sedlacek and J. Kahovec, Eds., Walter de Gruyter, New York (1987).
218. DiBenedetto, A. T., J. Polym. Sci. Polym. Phys., ed., 25, 1949 (1987).
219. th SPI Conf. Proc., (1990).
220. Bogetti, T. A. and Gillespie, J. W., 21st Int. SAMPE Tech. Conf., (1989).
221. Barone, M. R. and Caulk, D. A., Int. J. Heat Mass Transfer, 22, 1021, (1979).
222. Isayev, A. I., and Crouthamel, D. L., Polym. Plast. Technol., 22, 177, (1984).
223. Isayev, A. I., Polym. Eng. Sci., 23, 271, (1983).
224. Wübken, G., Ph. D. Thesis, IKV, RWTH-Aachen, Germany, (1974).
225. Baaijens, F. P. T., Rheol. Acta, 30, 284, (1991).
226. Wimberger-Friedl, R., Polym. Eng. Sci., 30, 813, (1990).
227. Ehrenstein, G. W., Mit Kunststoffen konstruieren, Hanser Publishers, Munich, (2007).
228. Timoshenko, S. P. and Krieger, S. W., Mechanics of Composite Materials, McGraw-Hill, New York, (1959).
229. Faupel, J. H. and Fisher, F. E., Engineering Design, McGraw-Hill, New York, (1981).
230. Lee, C.-C., GenCorp Research, Akron OH, Personal communication (1994).
231. O'Neill, J. M., Rogers, T. G., and Spencer, A. J. M., Math. Eng. Ind., 2, 65, (1988).
232. Tseng, S. C., and Osswald, T. A., Polymer Composites, 15, 270, (1994).
233. Kabanemi, K. K., and Crochet, M. J., Intern. Polym. Proc, 7, 60, (1992).
234. Bushko, W. C., and Stokes, V. K., Polym. Eng. Sci., 35, 351, (1995).
235. Bushko, W. C., and Stokes, V. K., Polym. Eng. Sci., 35, 365, (1995).
236. Chiang, H. H., Hieber, C. A., and Wang, K. K., Polym. Eng. Sci., 31, 116, (1991).
237. Chiang, H. H., Hieber, C. A., and Wang, K. K., Polym. Eng. Sci., 31, 125, (1991).
238. Chiang, H. H., Himasekhar, K., Santhanam, N., and Wang, K. K., J. Eng. Mater.Tech., 115, 37, (1993).
239. Chiang, H. H., Santhanam, N., Himasekhar, K., and Wang, K. K., Advances in Computer Aided Engineering (CAE) of Polymer Processing, MD-Vol. 49, ASME, New York, (1994).
240. Osswald, T. A., J. Thermoplast. Comp. Mater., 4, 173, (1991).
241. Tseng, S. C., Ph. D. Thesis, Dept. of Mech. Eng., University of Wisconsin-Madison, (1993).
242. Tseng, S. C., and Osswald, T. A., Polymer Composites, 15, 270, (1994).
243. Castiff, E. and Tobolsky, A. V. J., Colloid Sci., 10, 375, (1955).
244. Fillers, R. W., and Tschoegl, N. W., Trans. Soc. Rheol, 21, 51 (1977).
245. Williams, M. L., Landel, R. F., and Ferry, J. D., J. Amer. Chem. Soc., 77, 3701, (1955).
246. Wübken, G., Ph. D. Thesis, IKV, RWTH-Aachen, (1974).
247. Münstedt, H., Rheol. Acta, 14, 1077, (1975).
248. Domininghaus, H., Elsner, P., Eyerer, P., and Hirth, T., Kunststoffe - Eigenschaften und Anwendungen, Springer, Munich, (2012).
249. Treloar, L. R. G., The Physics of Rubber Elasticity, 3rd. ed., Clarendon Press, Oxford, (1975).
250. ICIPC, Medellín, Colombia.
251. Ward, I. M., and Hadley, D. W., An Introduction to Mechanical Properties of Solid Polymers, John Wiley & Sons, Chichester, (1993).
252. Mooney, M., J. Appl. Phys., 11, 582, (1940).
253. Rivlin, R. S., and Saunders, D. W., Phil. Trans. Roy. Soc., A243, 251, (1951).
254. Gumbrell, S. M., Mullins, L., and Rivlin, R. S., Trans. Faraday Soc., 49, 1495, (1953).
255. Guth, E., and Simha, R., Kolloid-Zeitschrift, 74, 266, (1936).
256. Guth, E., Proceedings of the American Physical Society, (1937): Physical Review, 53, 321, (1938).
257. Smallwood, H. M., J. Appl. Phys., 15, 758, (1944).
258. Mullins, L., and Tobin, N. R. N. R., J. Appl. Polym. Sci., 9, 2993, (1965).
259. Knausenberger, R., and Menges, G., SPE Technical Papers, 39th ANTEC, 240, (1981).
260. Retting, W., Rhelogica Acta, 8, 258, (1969).
261. Schmachtenberg, E., Ph. D. Thesis, IKV, RWTH-Aachen, Germany, (1985).
262. Krämer, S., Ph. D. Thesis, IKV, RWTH-Aachen, Germany, (1987).
263. Weng, M., Ph. D. Thesis, IKV, RWTH-Aachen, Germany, (1988).
264. ASTM, Plastics (II), 08.02, ASTM D2990, (2009).
265. Nielsen, L. E., Mechanical Properties of Polymers, Van Nostrand Reinhold, New York, (1962).
266. Menges, G., Haberstroh, E., Michaeli, W., and Schmachtenberg, E., Menges Werkstoffkunde Kunststoffe, Hanser Publishers, Munich, (2011).
267. nd ed., 47, Pergamon Press, Oxford, (1987).
268. O'Toole, J. L., Modern Plastics Encyclopedia, McGraw Hill, New York, (1983).
269. Thimm, Th., Plastomere, Elastomere, Duromere, Kautschuk und Gummi, 14, 8, 233, (1961).
270. Henning, F., Kunststoffe, 65, 401, (1975).
271. Hosemann, R., Kristall und Technik, 11, 1139, (1976).
272. Zachariades, A. E., and Kanamoto, T., High Modulus Polymers, A. E. Zachariades, and R. S. Porter, Eds., Marcel Dekker, Inc., New York, (1988).
273. Becker, H., Diploma Thesis, IKV, RWTH-Aachen, Germany, (1986).
274. Wende, A., Glasfaserverstärkte Plaste, VEB Deutscher Verlag für die Grundstoff-Industrie, Leipzig, (1969).
275. nd ed., Marcel Dekker, Inc., New York, (1994).
276. Krishnamachari, S. I., Applied Stress Analysis of Plastics, Van Nostrand Reinhold, New York, (1993).
277. Tsai, S. W., Halpin, J. C., and Pagano, N. J., Composite Materials Workshop, Technomic Publishing Co., Stamford, (1968).
278. Brintrup, H., Ph. D. Thesis, IKV, RWTH-Aachen, Germany (1974).
279. Ehrenstein, G. W., Faserverbundkunststoffe, Hanser Publishers, Munich, (1992).
280. Menges, G., and Bintrup, H., Chapter 4 in Polymere Werkstoffe, Georg Thieme Verlag Stuttgart, (1984).
281. Fujimoto, T., Ozaki, M., and Nagasawa, M., J. Polymer Sci., 2, 6, (1968).
282. Powell, P. C., Engineering with Polymers, Chapman and Hall, London, (1983).
283. Pazek, D. J., J. Polym. Sci., A-2, (6), 621, (1968).
284. Carreau, P. J., De Kee, D. C. R., and Chhabra, R. P., Rheology of Polymeric Systems, Hanser Publishers, Munich, (1997).
285. nd ed., Pergamon Press, (1987).
286. Kinloch, A. J., Young, R. J., Fracture Behavior of Polymers, Applied Science Publishers, London, (1983).
287. Griffith, A. A., Phil. Trans. Roy. Soc., A221, 163, (1920).
288. Rice, J. R., J. Appl. Mech., 35, 379, (1965).
289. Vincent, P. I., Plastics, 29, 79 (1964).
290. Beahan, P., Bevis, M., and Hull, D., Phil. Mag., 24, 1267, (1971).
291. Menges, G., Haberstroh, E., Michaeli, W., and Schmachtenberg, E., Menges Werkstoffkunde Kunststoffe, Hanser Publishers, Munich (2011).
292. Nicolay, Ph. D. Thesis, IKV, RWTH-Aachen, (1976).
293. Menges, G., and Alf, E., Kunststoffe, 62, 259, (1972).
294. Schultz, J. M., Polymer Materials Science, Prentice-Hall, Englewood Cliffs, N.J., (1974).
295. Ehrenstein, G. W., Polymeric Materials, Hanser Publishers, Munich, (2001).
296. Engel, L., Klingele, H., Ehrenstein, G. W., and Schaper, H., Scanning Electron Microscopy of Plastics Failure, Hanser Publishers, Munich, (2010).
297. Roskothen, H. J., Ph. D. Thesis, IKV, RWTH-Aachen, (1974).
298. Boyer, R. F., Polymer Eng. Sci., 8, 161, (1968).
299. Boden, H. E., Ph.D. Thesis, IKV, RWTH-Aachen, Germany, (1983).
300. Menges, G., and Boden, H.-E., Failure of Plastics, Chapter 9, in Eds. W. Brostow, and R.D. Corneliussen, Hanser Publishers, Munich, (1986).
301. Andrews, E. H., Fracture in Polymers, Oliver and Body, London, (1968).
302. Rest, H., Ph. D. Thesis, IKV-Aachen, (1984).
303. ASTM, Vol .08.01, Plastics (I): C 177-D 1600, ASTM-D 256, (2010).
304. Plati, E. and Williams, J. G., Polym. Eng. Sci., 15, 470, (1975).
305. Crawford, R. J., and Benham, P. P., Polymer, 16, 908, (1975).
306. Richard, K., Gaube, E., and Diedrich, G., Kunststoffe, 49, 516, (1959).
307. Gaube, E. and Kausch, H. H., Kunststoffe, 63, 391, (1973).
308. Bannantine, J. A., Comer, J. J., and Handrock, J. L., Fundamentals of Metal Fatigue Analysis, Prentice Hall, Englewood Cliffs, (1990).
309. Riddell, M. N., Plast. Eng., 40, 4, 71 (1974).
310. Kleinemeier, B., Ph. D. Thesis, IKW-Aachen, Germany, (1979).
311. Bucknall, C. B., Gotham, K. V., and Vincent, P. I., in Polymer Science. A Materials Handbook, Chapter 10 Ed. A. D. Jenkins, Vol. 1, American Elsevier, New York, (1972).
312. Owen, M. J., Smith, T. R., and Dukes, R., Plast.Polym., 37, 227, (1969).
313. Hertzberg, R. W., and Manson, J. A., Fatigue of Engineering Plastics, Academic Press, New York, (1980).
314. Denton, D. L., The Mechanical Properties of an SMC-R50 Composite, Owens-Corning Fiberglas Corp., (1979).
315. Hertzberg, R. W., Manson, J. A., and Skibo, M. D., Polym. Eng. Sci., 15, 252, (1975).
316. Domininghaus, H., Elsner, P., Eyerer, P., and Hirth, T., Kunststoffe - Eigenschaften und Anwendungen, Springer, Munich, (2012).
317. Dolfen, E., Ph. D. Thesis, IKV, RWTH-Aachen, (1978).
318. Davis, A. and Sims, D., Weathering of Polymers, Applied Science Publishers, London, (1983).
319. Ruhnke, G. M. and Biritz, L. F., Kunststoffe, 62, 250, (1972).
320. Bernier, G. A., and Kambour, R. P., Macromolecules, 1, 393, (1968).
321. Domininghaus, H., Elsner, P., Eyerer, P., and Hirth, T., Kunststoffe - Eigenschaften und Anwendungen, Springer, Munich, (2012).
322. Menges, G., Haberstroh, E., Michaeli, W., and Schmachtenberg, E., Menges Werkstoffkunde Kunststoffe, Hanser Publishers, Munich, (2011).
323. Baer, E., Engineering Design for Plastics, Robert E. Krieger Publishing Company, (1975).
324. Reboul, J.-P., Thermoplastic Polymer Additives, Chapter 6, J. T. Lutz, Jr., Ed., Marcel Dekker, Inc., New York, (1989).
325. Berg, H., Ph.D Thesis, IKV, RWTH-Aachen, Germany, (1976).
326. Wagner, H., Internal report, AEG, Kassel, Germany, (1974).
327. nd ed., Pergamon Press, (1987).
328. ASTM Vol 08.02, Plastics (II): ASTM-D4093-95, (2010).
329. Janeschitz-Kriegl, H., Polymer Melt Rheology and Flow Birefringence, Elsevier, Amsterdam, (1984).
330. Greener, J., and Wimberger-Friedl, R., Precision Injection Molding - Process, Materials and Applications, Hanser Publishers, Munich, (2006).
331. Wimberger-Friedl, R., Polym. Eng. Sci., 30, 813, (1990).
332. Lodge, A. S., Trans. Faraday Soc., 52, 120, (1956).
333. Sornberger, G., Quantin, J. C., Fajolle, R., Vergnes, B., and Agassant, J. F., J. Non-Newt. Fluid Mech., 23, 123, (1987).
334. Bartoe, W. F., Engineering Design for Plastics, E. Baer, Ed., Chapter 8, R. E. Krieger Publishing Co., (1975).
335. ASTM Vol 08.02, Plastics (II): ASTM-D2457, (1994).
336. Adams, J. M., The Science of Surface Coatings, Chapter 12, Ed. H. W. Chatfield, D. van Nostrand Co., Inc. Princeton, (1962).
337. Chapman, D., The Science of Surface Coatings, Chapter 19, Ed. H. W. Chatfield, D. van Nostrand Co., Inc. Princeton, (1962).
338. Dewitt, D. P., and Richmond, J. C., "Thermal Radiative Properties of Materials", Chapter 2 in Theory and Practice of Radiation Thermometry, D. P. Dewitt and G. D. Nutter, Eds., Wiley, New York, (1988).
339. Heimann, W., Communication, Firma W. Heimann, Wiesbaden, Germany.
340. Haberstroh, E., Ph. D. Thesis, IKV, RWTH-Aachen, Germany, (1981).
341. Rietveld, J. X., and Lai, G.-Y., SPE ANTEC, 38, 2192, (1992).
342. Lai, G.-Y., Ph. D. Thesis, University of Wisconsin-Madison, Madison, WI, (1993).
343. Rietveld, J. X., and Lai, G.-Y., SPE ANTEC, 40, 836, (1994).
344. Weinand, D., Ph. D. Thesis, IKV, RWTH-Aachen, Germany, (1987).
345. Rosato, D., and Rosato, D. V., Blow Molding Handbook, Hanser Publishers, Munich, (2003).
346. Rogers, C. E., Engineering Design for Plastics, Ed. E. Baer, Chapter 9, Robert E. Krieger Publishing Company, Huntington, (1975).
347. Knappe, W., VDI-Berichte, 68, 29, (1963).
348. th ed., Elsevier, Amsterdam, (2009).
349. Menges, G., and Löwer, K., Metallic Corrosion: Proceedings, 8th ICMC, 2202, Mainz (1981).
350. Menges, G., Kunststoffe, 63, 95, (1973).
351. Menges, G. and Suchanek, H., Kunststoffe, Fortschrittsberichte, Vol. 3, Hanser Publishers, Munich, (1976).
352. Pütz, D., Ph. D. Thesis, IKV, RWTH-Aachen, Germany, (1977).
353. Offergeld, H., Ph. D Thesis, IKV, RWTH-Aachen, (1990).
354. Griffin, J. D., and Skochdopole, R. E., Engineering Design for Plastics, E. Baer, (Ed.), Chapter 15, Robert E. Krieger Publishing Company, Huntington, (1975).