Computer modeling for evaluating trabecular bone mechanics

Mechanical Testing of Bone and the Bone-Implant Interface

Volumn , Issue , 1999, Pages 407-436

  Saxena, Rakesh ^a   Keller, Tony S ^a  

^a University of Vermont   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84905509508     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (40)

1. McElhaney, J.H., Fogle, J.L., Melvin, J.W., et al., Mechanical properties of cranial bone, J. Biomech., 3, 495, 1970.
2. Carter, D.R. and Hayes, W.C., The compressive behavior of bone as a two-phase porous structure, J. Bone Joint Surg., 59-A, 954, 1977.
3. Gibson, L.J., The mechanical behavior of cancellous bone, J. Biomech., 18, 317, 1985.
4. Rice, J.C., Cowin, S.C., and Bowman, J.A., On the dependence of the elasticity and strength of cancellous bone on apparent density, J. Biomech., 21, 155, 1988.
5. Keller, T.S., Predicting the compressive mechanical behavior of bone, J. Biomech., 27, 1159, 1994.
6. Zhu, M., Keller, T.S., Moeljanto, E., and Spengler, D.M., Multiplanar variations in the structural characteristics of cancellous bone, Bone, 15, 251, 1994.
7. Radon, J., On the determination of functions from their integrals along certain manifolds, Ber. Verh. Saechs. Akad. Wiss. Leipzig, Math. Phys. Kl., 69, 262, 1917.
8. Keller, T.S., Moeljanto, E., Main, J.A., and Spengler, D.M., Distribution and orientation of bone in the human lumbar vertebral centrum, J. Spinal Dis., 5, 60, 1992.
9. Hall, E.L., Computer Image Processing and Recognition, Academic Press, New York, 1979.
10. Trussell, H.J., Comments on “Picture thresholding using an iterative selection method,” IEEE Trans. Syst. Man Cybern., 9, 311, 1979.
11. Harrigan, T.P., Jasty, M., Mann, R.W., and Harris, W.H., Limitations of the continuum assumption in cancellous bone, J. Biomech., 21, 269, 1988.
12. Keller, T.S., Trabecular Bone Morphology and Analysis System (TBMAS), Department of Mechanical Engineering, the University of Vermont, Burlington, 1998.
13. Lorensen, W.E. and Cline, H.E., Marching cubes: a high resolution 3D surface construction algorithm, Comput. Graphics, 21, 163, 1987.
14. Schroeder, W., Martin, K., and Lorensen, B., The Visualization Toolkit — An Object-Oriented Approach to 3D Graphics, Prentice-Hall, Upper Saddle River, NJ, 1997.
15. Fyhrie, D.P., Hamid, M.S., Kuo, R.F., and Lang, S.M., Direct three-dimensional finite element analysis of human vertebral cancellous bone, Trans. Orthrop. Res. Soc., 17, 551, 1992.
16. Hollister, S.J., Brennan, J.M., and Kikuchi, N., A homogenization sampling procedure for calculating trabecular bone effective stiffness and tissue level stress, J. Biomech., 27, 433, 1994.
17. van Rietbergen, B., Weinans, H., Huiskes, R., and Odgaard, A., A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models, J. Biomech., 28, 69, 1995.
18. Müller, R. and Rüegsegger, P., Three-dimensional finite-element modelling of noninvasively assessed trabecular bone structures, Med. Eng. Phys., 17, 126, 1995.
19. Saxena, R., Keller, T.S., and Sullivan, J.M., A three-dimensional finite element scheme to investigate the apparent mechanical properties of trabecular bone, Comput. Methods Biomech. Biomed. Eng., 2, 287, 1999.
20. Guldberg, R.E. and Hollister, S.J., Finite element solution errors associated with digital image-based mesh generation, ASME Bioeng. Conf., 28, 147, 1994.
21. Jacobs, C.R., Davis, B.R., Rieger, C.J., et al., Accurate quantification of cancellous bone tissue modulus can be made using experimentally measured apparent stiffness and large-scale finite-element modeling, Trans. ORS, 23, 111, 1998.
22. van Rietbergen, B., Ulrich, D., Pistoia, W., et al., Prediction of trabecular bone failure parameters using a tissue failure criterion, Trans. ORS, 23, 550, 1998.
23. Sullivan, J.M., Jr., Charron, G., and Paulsen, K.D., A three-dimensional mesh generator for arbitrary multiple material domains, Finite Elem. Anal. Des., 25, 219, 1997.
24. Lo, S.H., A new mesh generation scheme for arbitrary planar domains, Int. J. Num. Meth. Eng., 21, 1403, 1985.
25. Desai, C.S. and Abel, J.F., Introduction to the Finite Element Method, Van Nostrand Reinhold, New York, 1972.
26. Spyrakos, C.C., Finite Element Modeling in Engineering Practice, West Virginia University Press, Morgantown, 1994.
27. Rho, J.Y., Ashman, R.B., and Turner, C.H., Young’s modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements, J. Biomech., 26, 111, 1993.
28. Lakes, R., Foam structures with a negative Poisson’s ratio, Science, 235, 1038, 1987.
29. Keaveny, T.M., Borchers, R.E., Gibson, L.J., and Hayes, W.C., Theoretical analysis of the experimental artifact in trabecular bone compressive modulus, J. Biomech., 26, 599, 1993.
30. Golub, G.H. and Ortega, J.M., Scientific Computing and Differential Equations: An Introduction to Numerical Methods, Academic Press, San Diego, CA, 1992.
31. Zhu, M., Keller, T.S., and Spengler, D.M., Effects of specimen load-bearing and free surface layers on the compressive mechanical properties of cellular materials, J. Biomech., 27, 57, 1994.
32. Lode, W., Versuche über den Einfluss der mittleren Hauptspannung auf das Fliessen des Metalle Eisen, Kaupfer, and Nickel, Z. Phys., 36, 913, 1926.
33. Weibel, E.R. and Elias, H.E., Quantitative Methods in Morphology, Springer, Berlin, 1967.
34. Underwood, E.E., Quantitative Stereology, Addison-Wesley, Reading, MA, 1970.
35. Whitehouse, W.J., The quantitative morphology of anisotropic trabecular bone, J. Microsc., 101, 153, 1974.
36. Harrigan, T.P. and Mann, R.W., Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor, J. Mater. Sci., 19, 761, 1984.
37. Kuo, A.D. and Carter, D.R., Computational methods for analyzing the structure of cancellous bone in planar sections, J. Orthop. Res., 9, 918, 1991.
38. Odgaard, A., Three-dimensional methods for quantification of cancellous bone architecture, Bone, 20, 315, 1997.
39. Cowin, S.C., Bone Mechanics, CRC Press, Boca Raton, FL, 1989.
40. van Rietbergen, B., Odgaard, A., Kabel, J., and Huiskes, R., Relationships between bone morphology and bone elastic properties can be accurately quantified using high-resolution computer reconstructions, J. Orthop. Res., 16, 23, 1998.