Modeling, processing, and characterization of exfoliated graphite nanoplatelet-nylon 6 composite fibers

Composites Part B: Engineering

Volumn 66, Issue , 2014, Pages 511-517

  Kim, Myungsoo ^a   Hwang, Sang Ha ^a   Kim, Byeong Joo ^a   Baek, Jong Beom ^a   Shin, Hyeon Suk ^a   Park, Hyung Wook ^a   Park, Young Bin ^a   Bae, Il Joon ^b   Lee, Seong Young ^b  

^a Ulsan National Institute of Science and Technology   (South Korea)

^b Research Institute of Industrial Science and Technology (RIST)   (South Korea)

Author keywords

A. Fibers; A. Nano structures; C. Analytical modeling; E. Melt spinning

Indexed keywords

ALIGNMENT; ANALYTICAL MODELS; MECHANICAL PROPERTIES; MELT SPINNING; POLYAMIDES; RAYON;

COMPOSITE FIBERS; E. MELT SPINNINGS; EXFOLIATED GRAPHITE; FILLER ORIENTATION; INTERFACIAL BONDING; MEASURED PROPERTIES; MICRO MECHANICS MODEL; MOLECULAR CHAINS;

SPINNING (FIBERS);

EID: 84905229882     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2014.06.011     Document Type: Article

References (36)

1. A. Baji, Y.W. Mai, S.C. Wong, M. Abtahi, and P. Chen Electrospinning of polymer nanofibers: effects on oriented morphology, structures and tensile properties Compos Sci Technol 70 2010 703 718
2. M.D. Teli, and R.D. Kale Polyester nanocomposite fibers with improved flame retardancy and thermal stability Polym Eng Sci 52 5 2012 1148 1154
3. R. Murugan, and S. Ramakrishna Design strategies of tissue engineering scaffolds with controlled fiber orientation Tissue Eng 13 8 2007 1845 1866 (Pubitemid 47293986)
4. L. Hu, M. Pasta, F. La Mantia, L. Cui, S. Jeong, and H.D. Deshazer et al. Stretchable, porous, and conductive energy textiles Nano Lett 10 2 2010 708 714
5. Y. Jin, H. Liu, N. Wang, L. Hou, and X.X. Zhang Dispersibility and chemical bonds between multi-walled carbon nanotubes and poly(ether ether ketone) in nanocomposite fibers Mater Chem Phys 135 2012 948 956
6. A. Mirmohseni, and M.S. Seyed Dorraji Effects of dopant, coagulant, and reinforcing nanofiller on mechanical and electrical properties of wet-spun polyaniline nanocomposite fibers J Polym Res 19 2012 9852 10.1007/s10965-012- 9852-2
7. Agrawal SL, Rai N, Natarajan TS, Chand N. Electrical characterization of PVA-based nanocomposite electrolyte nanofibre mats doped with a multiwalled carbon nanotube, Springer, Published online: 29 April 2012, Ionics doi: http://dx.doi.org/10.1007/s11581-012-0713-0.
8. Y. Dror, W. Salalha, R.L. Khalfin, Y. Cohen, A.L. Yarin, and E. Zussman Carbon nanotubes embedded in oriented polymer nanofibers by electrospinning Langmuir 19 2003 7012 7020
9. C.L. Tucker III, and E. Liang Stiffness prediction for unidirectional short-fiber composites: review and evaluation Compos Sci Technol 59 1999 655 671 (Pubitemid 29326405)
10. G.M. Odegard, T.S. Gatesb, K.E. Wisea, C. Parka, and E.J. Siochic Constitutive modeling of nanotube-reinforced polymer composites Compos Sci Technol 63 2003 1671 1687 (Pubitemid 36914805)
11. B. Ashrafi, P. Hubert, and S. Vengallatore Carbon nanotube-reinforced composites as structural materials for microactuators in microelectromechanical systems Nanotechnology 17 2006 4895 4903 (Pubitemid 44424635)
12. B. Ashrafi, and P. Hubert Modeling the elastic properties of carbon nanotube array/polymer composites Compos Sci Technol 66 2006 387 396 (Pubitemid 43019666)
13. A.A. Azeez, K.Y. Rhee, S.J. Park, and D. Hui Epoxy clay nanocomposites - processing, properties and applications: a review Compos Part B 45 2013 308 320
14. B. Jiang, C. Liu, C. Zhang, B. Wang, and Z. Wang The effect of non-symmetric distribution of fiber orientation and aspect ratio on elastic properties of composites Compos Part B 38 2007 24 34 (Pubitemid 44293459)
15. S. Mazinani, A. Ajji, and C. Dubois Fundamental study of crystallization, orientation, and electrical conductivity of electrospun PET/carbon nanotube nanofibers J Polym Sci: Part B: Polym Phys 48 2010 2052 2064
16. A.A. Hamza, I.M. Fouda, K.A. El-Farhaty, and S.A. Helaly Stress birefringence in polypropylene fibers Polym Test 7 1987 329 343
17. A.A. Hamza, I.M. Fouda, M.A. Kabeel, and H.M. Shabana The optical behaviour of polyethylene fibres with different draw ratios Polym Test 8 1989 201 212
18. A.A. Hamza, I.M. Fouda, K.A. El-Farhaty, and E.A. Seisa Opto-mechanical properties of fibres-1: optical anisotropy in stretched nylon 6 fibers Polym Test 10 1991 83 90 (Pubitemid 21698793)
19. P. Pötschke, H. Brünig, A. Janke, D. Fischer, and D. Jehnichen Orientation of multiwalled carbon nanotubes in composites with polycarbonate by melt spinning Polymer 46 2005 10355 10363 (Pubitemid 41455266)
20. Y. Gao, X. Xu, J. Gao, D. Liang, Q. Fu, and Q. Zhang et al. Highly efficient load transfer in polypropylene/vapor grown carbon fiber nanocomposites Compos Part A 45 2013 35 43
21. S. Morimune, M. Kotera, T. Nishino, and T. Goto Uniaxial drawing of poly(vinyl alcohol)/graphene oxide nanocomposites Carbon 70 2014 38 45
22. Suresh G. Advani, and Charles L. Tucker The use of tensors to describe and predict fiber orientation in short fiber composites J Rheol 31 8 1987 751 784
23. D.A. Jack, and D.E. Smith Elastic properties of short-fiber polymer composites, derivation and demonstration of analytical forms for expectation and variance from orientation tensors J Compos Mater 42 3 2008 277 308 (Pubitemid 351231775)
24. M. Laspalas, C. Crespo, M.A. Jiménez, B. García, and J.L. Pelegay Application of micromechanical models for elasticity and failure to short fibre reinforced composites. Numerical implementation and experimental validation Comput Struct 86 2008 977 987 (Pubitemid 351400676)
25. R.M. Jones Macromechanical behavior of a lamina, Mechanics of Composite Materials 2nd ed. 1999 Taylor and Francis Philadelphia
26. Y. Beneveniste A new approach to the application of Mori-Tanaka's theory in composite materials Mech Mater 6 1987 147 157
27. J.D. Eshelby The determination of the elastic field of an ellipsoidal inclusion, and related problems Proc Royal Soc London, Series A A241 1957 376 396
28. T. Mura Isotropic inclusions, micromechanics of defects in solids 1987 Martinus Nijhoff Publishers The Netherlands
29. R.B. Hetnarski, and J. Lgnaczak Mathematical theory of elasticity 2004 Taylor and Francis Florida
30. J.E. Mark Polymer data handbook 2nd ed. 2009 Oxford University Press New York
31. E.J. Barbero Introduction composite materials design 1999 Taylor and Francis New York
32. P.K. Mallick Fiber-reinforced composites, materials, manufacturing, and design 2nd ed. 1993 Marcel Dekker New York
33. Bunch JS. Mechanical and Electrical Properties of Graphene Sheets. Ph.D. Dissertation. Cornell University, 2008.
34. M. Kim, Y.B. Park, O.I. Okoli, and C. Zhang Processing, characterization, and modeling of carbon nanotube-reinforced multiscale composites Compos Sci Technol 69 2009 335 342
35. M. Kim, O.I. Okoli, D. Jack, Y.B. Park, and Z.Y. Liang Characterisation and modelling of CNT-epoxy and CNT-fibre-epoxy composites Plast Rubber Compos 40 10 2011 481 490
36. M.K. Yeh, N.H. Tai, and J.H. Liu Mechanical behavior of phenolic-based composites reinforced with multi-walled carbon nanotubes Carbon 44 2006 1 9