Numerical study of the components positioning influence on the stability of a reverse shoulder prosthesis

International Journal on Interactive Design and Manufacturing

Volumn 8, Issue 3, 2014, Pages 187-197

  Ingrassia, T ^a   Mancuso, A ^a   Nigrelli, V ^a   Tumino, D ^b  

^a UNIVERSITY OF PALERMO   (Italy)

^b KORE UNIVERSITY OF ENNA   (Italy)

Author keywords

3D scanner acquisition; Non linear FEM analyses; Reversed shoulder prosthesis; Shoulder stability ratio

Indexed keywords

BONE; COMPUTER AIDED DESIGN; MULTISPECTRAL SCANNERS; PROSTHETICS; STABILITY;

3-D SCANNER; EXPERIMENTAL CONDITIONS; FINITE ELEMENT METHOD MODELS; GEOMETRICAL CONFIGURATIONS; NONLINEAR FEM; PROSTHETIC COMPONENTS; STABILITY CONDITION; STABILITY RATIO;

LOADING;

EID: 84905215053     PISSN: 19552513     EISSN: 19552505     Source Type: Journal    
DOI: 10.1007/s12008-014-0215-6     Document Type: Article

References (33)

1. Grammont, P. M., Baulot, E.: Delta shoulder prosthesis for rotator cuff rupture. Orthopedics 16, 65-68 (1993).
2. Matsen, F. A., Boileau, P., Walch, G.: The reverse total shoulder arthroplasty. J. Bone Joint Surg. Am. 88-A(3), 660-667 (2007).
3. Terrier, A., Reist, A., Merlini, F., Farron, A.: Simulated joint and muscle forces in reversed and anatomic shoulder prostheses. J. Bone Joint Surg. Br. 90(6), 751-756 (2008).
4. Boileau, P., Watkinson, D. J., Hatzidakis, A. M., Balg, F.: Grammont reverse prosthesis: design, rationale, and biomechanics. J. Shoulder Elbow Surg. 14(1, Supp 1), 147-161 (2005).
5. Cuff, D., Pupello, D., Virani, N., Levy, J.: Reverse shoulder arthroplasty for the treatment of rotator cuff deficiency. J. Bone Joint Surg. Am. 90, 1244-1251 (2008).
6. Sirveaux, F., Favard, L., Oudet, D., Huquet, D., Walch, G., Molé, D.: Grammont inverted total shoulder arthroplasty in the treatment of glenohumeral osteoarthritis with massive rupture of the cuff. J. Bone Joint Surg. 86-B, 388-395 (2004).
7. Frankle, M. A., Cuff, D., Levy, J. C., Gutiérrez, S.: Evaluation of abduction range of motion and avoidance of inferior scapular impingement in a reverse shoulder model. J. Shoulder Elbow Surg. 17(4), 608-615 (2008).
8. Simovitch, R. W., Zumstein, M. A., Lohri, E., Helmy, N., Gerber, C.: Predictors of scapular notching in patients managed with the Delta III reverse total shoulder replacement. J. Bone Joint Surg. 89, 588-600 (2007).
9. Franklin, J. L., Barrett, W. P., Jackins, S. E., Matsen, F. A.: Glenoid loosening in total shoulder arthroplasty. Association with rotator cuff deficiency. J. Arthroplasty 3, 39-46 (1988).
10. Gutiérrez, S., Levy, J. C., Lee, W. E.: Center of rotation affects abduction range of motion of reverse shoulder arthroplasty. Clin. Orthop. Relat. Res. 458, 78-82 (2007).
11. Frankle, M. A., Luo, Z. P., Gutiérrez, S., Levy, J. C.: Arc of motion and socket depth in reverse shoulder implants. Clin. Biomech. 24(6), 473-479 (2009).
12. Zumstein, M. A., Pinedo, M., Old, J., Boileau, P.: Problems, complications, reoperations, and revisions in reverse total shoulder arthroplasty: a systematic review. J. Shoulder Elbow Surg. 20(1), 146-157 (2011).
13. Gutiérrez, S., Keller, T. S., Levy, J. C., Lee, W. E.: Hierarchy of stability factors in reverse shoulder arthroplasty. Clin. Orthop. Relat. Res. 466(3), 670-676 (2008).
14. Favre, P., Sussmann, P. S., Gerber, C.: The effect of component positioning on intrinsic stability of the reverse shoulder arthroplasty. J. Shoulder Elbow Surg. 19, 550-556 (2010).
15. A. Clouthier, M. Hetzler, G. Fedorak: Effect of loading direction on force to dislocate in reverse shoulder arthroplasty. In: Proceedings of 35th Annual Meeting of the American Society of biomechanics, August 10-13, 2011, California.
16. Ackland, D. C., Pandy, M. G.: Lines of action and stabilizing potential of the shoulder musculature. J. Anat. 215, 184-197 (2009).
17. Barone, S., Paoli, A., Razionale, A. V.: Assessment of chronic wounds by 3D optical imaging based on integrating geometrical, chromatic and thermal data. J. Eng. Med. 225(2), 181-193 (2011).
18. Ausiello, P., Franciosa, P., Martorelli, M., Watts, D. C.: Numerical fatigue 3D-FE modelling of indirect composite-restored posterior teeth. Dent. Mater. 27(5), 423-430 (2011).
19. Ausiello, P., Franciosa, P., Martorelli, M., Watts, D. C.: Mechanical behavior of post-restored upper canine teeth: a 3D FE analysis. Dent. Mater. 27(12), 1285-1294 (2011).
20. Ingrassia, T., Nalbone, L., Nigrelli, V., Tumino, D., Ricotta, V.: Finite element analysis of two total knee joint prostheses. Int. J. Interact. Design Manuf. 7(2), 91-101 (2012). doi: 10. 1007/s12008-012-0167-7.
21. Cerniglia, D., Ingrassia, T., D'Acquisto, L., Saporito, M., Tumino, D.: Contact between the components of a knee prosthesis: numerical and experimental study. Frattura ed Integrità Strutturale 22, 56-68 (2012). doi: 10. 3221/IGF-ESIS. 22. 07.
22. Franciosa, P., Gerbino, S., Lanzotti, A., Silvestri, L.: Improving comfort of shoe sole through experiments based on CAD-FEM modelling. Med. Eng. Phys. (2012). doi: 10. 1016/j. medengphy. 2012. 03. 007.
23. http://www. geomagic. com/en/products/studio/overview.
24. Ingrassia, T., Cappello, F.: VirDe: a new virtual reality design approach. Int. J. Interact. Design Manuf. 3(1), 1-11 (2009). doi: 10. 1007/s12008-008-0056-2.
25. Lanzotti, A.: Robust design of car packaging in virtual environment. Int. J. Interact. Design Manuf. 2(1), 39-46 (2008).
26. Ingrassia, T., Nigrelli, V.: Design optimization and analysis of a new rear underrun protective device for truck. In: Proceedings of the 8th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2010, 2, 2010, pp. 713-725 (2010).
27. Ingrassia, T., Nigrelli, V., Buttitta, R.: A comparison of simplex and simulated annealing for optimization of a new rear underrun protective device. Eng. Comput. (2012). doi: 10. 1007/s00366-012-0270-1.
28. Cazeneuve, J. F., Cristofari, D. J.: The reverse shoulder prosthesis in the treatment of fractures of the proximal humerus in the elderly. J. Bone Joint Surg. Br. 92(4), 535-539 (2010).
29. Kenderian, S., Djordjevic, B. B., Cerniglia, D., Garcia, G.: Dynamic railroad inspection using the laser-air hybrid ultrasonic technique. Insight Non-Destruct. Test. Cond. Monit. 48(6), 336-341 (2006).
30. Pantano, A., Cerniglia, D.: Simulation of laser generated ultrasound with application to defect detection. Appl. Phys. A Mater. Sci. Process. 91(3), 521-528 (2008).
31. Cerniglia, D., Pantano, A., Montinaro, N.: Simulation of laser-generated ultrasonic wave propagation in solid media and air with application to NDE. Appl. Phys. A Mater. Sci. Process. 98(2), 327-336 (2010).
32. Cerniglia, D., Nigrelli, V., Mancuso, A., Alberti, A.: Real-time non-contact ultrasonic detection of surface defects on objects moving at high speed. Frattura ed Integrità Strutturale 22, 93-101 (2012). doi: 10. 3221/IGF-ESIS. 22. 10.
33. Godest, A. C., Beaugonin, M., Haug, E., Taylor, M., Gregson, P. J.: Simulation of a knee joint replacement during a gait cycle using explicit finite element analysis. J. Biomech. 35, 267-275 (2002).