Optimal design of cogeneration system based on exergoenvironmental analysis

Clean Technologies and Environmental Policy

Volumn 16, Issue 6, 2014, Pages 1045-1065

  Navid, Pooya ^a   Manesh, Mohammad Hasan Khoshgoftar ^b   Marigorta, Ana Maria Blanco ^c  

^a K N TOOSI UNIVERSITY OF TECHNOLOGY   (Iran)

^b UNIVERSITY OF QOM   (Iran)

^c UNIVERSITY OF LAS PALMAS DE GRAN CANARIA   (Spain)

Author keywords

Cogeneration; Environmental impact; Exergoeconomic; Exergoenvironmental; Targeting

Indexed keywords

COGENERATION PLANTS; COST BENEFIT ANALYSIS; COST ESTIMATING; ECODESIGN; EXERGY; LIFE CYCLE; OPTIMAL SYSTEMS;

COGENERATION; COGENERATION SYSTEMS; EXERGOECONOMIC; EXERGOENVIRONMENTAL; GRAPHIC REPRESENTATION; LIFE CYCLE ASSESSMENT (LCA); SYSTEM COMPONENTS; TARGETING;

ENVIRONMENTAL IMPACT;

EID: 84905159387     PISSN: 1618954X     EISSN: 16189558     Source Type: Journal    
DOI: 10.1007/s10098-013-0705-4     Document Type: Article

References (47)

1. Al-Azri NA (2008) Integrated approaches to the optimization of process-utility systems. Ph.D. Thesis, Texas A&M University, USA
2. Al-Azri N, Al-Thubaiti M, El-Halwagi M (2009) An algorithmic approach to the optimization of process cogeneration. Clean Technol Environ Policy 11:329-338
3. Bamufleh HS, Ponce-Ortega JM, El-Halwagi MM (2013) Multi-objective optimization of process cogeneration systems with economic, environmental, and social tradeoffs. Clean Technol Environ Policy 15:185-197
4. Bandyopadhyay S, Varghese J, Bansal V (2010) Targeting for cogeneration potential through total site integration. Appl Therm Eng 30:6-14
5. Bejan A, Tsatsaronis G, Moran M (1996) Thermal design and optimization. Wiley, New York
6. Boyano A, Blanco-Marigorta AM, Morosuk T, Tsatsaronis G (2010) Exergoenvironmental analysis of a steam methane reforming process for hydrogen production. Energy Int J. doi: 10.1016/j.energy.2010.05.020
7. Boyano A, Morosuk T, Blanco-Marigorta AM, Tsatsaronis G (2012) Conventional and advanced exergoenvironmental analysis of a steam methane reforming reactor for hydrogen production. J Clean Prod 20:152-160
8. Chao Z, Yan W (2006) Exergy cost analysis of a coal fired power plant based on structural theory of thermoeconomics. Energy Convers Manag 47:817-843 (Pubitemid 43132707)
9. Compilation of air pollutant emission factors (1998) In: Stationary point and area sources, 5th edn, vol 1. US Environmental Protection Agency, Office of Air Quality Planning and Standards; AP-42, Research Triangle Park
10. Dhole VR, Linnhoff B (1993) Total site targets for fuel, cogeneration, emissions and cooling. Comput Chem Eng 17:S101-S109
11. Ghannadzadeh A, Perry S, Smith R (2011) Cogeneration targeting for site utility systems. Appl Therm Eng 43:7-13
12. Gutiérrez-Arriaga CG, Serna-González M, Ponce-Ortega JM, El-Halwagi MM (2013) Multi-objective optimization of steam power plants for sustainable generation of electricity. Clean Technol Environ Policy 15:551-566
13. Harell DA (2004) Resource conservation and allocation via process integration. Ph.D. Thesis, Texas A&M University, USA
14. International Organization for Standardization (ISO) (2006) Environ-mental management - life cycle assessment. European Standard ENISO 14040 and 14044, Geneva, Switzerland
15. Kapil A, Bulatov I, Smith R, Kim JK (2012) Site-wide low-grade heat recovery with a new cogeneration targeting method. Chem Eng Res Des 90:677-689
16. Karimkashi S, Amidpour M (2012) Total site energy improvement using R-curve concept. Energy 40:329-340
17. Kenney WF (1984) Energy conservation in process industries. Academic Press, Orlando, London
18. Kimura H, Zhu XX (2000) R-curve concept and its application for industrial energy management. Ind Eng Chem Res 39:2315-2335 (Pubitemid 30460546)
19. 2 on total sites. Appl Therm Eng 17(8-10):993-1003 (Pubitemid 127408828)
20. Lazzaretto A, Tsatsaronis G (2006) SPECO: a systematic and general methodology for calculating efficiencies and costs in thermal systems. Energy 31:1257-1289 (Pubitemid 43256687)
21. Manesh MHK, Amidpour M, Abadi HKJ (2009a) Comparison of combined cycle and conventional steam power plant through energy level and thermoeconomic analysis. ASME, Houston
22. Manesh MHK, Mazhari V, Amidpour M (2009b) Power plant optimization study in Iran LNG Project through MINLP Method. In: Klemeš J, AIDIC Servizi S.r.l. (ed) Chemical engineering transactions, vol 18. ISBN 978-88-95608-04-4; ISSN 1974-9791
23. Manesh MHK, Navid P, Amidpour M, Marigorta AB (2012a) Optimal design of combined heat and power system using R-curve concept. In: Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Houston, USA, 9-6 November 2012
24. Manesh MHK, Abadi SK, Amidpour M, Hamedi MH (2012b) A new targeting method for estimation of cogeneration potential and total annualized cost in process industries. J Chem Eng Res Des. doi: 10.1016/j.cherd.2012.12.002
25. Manesh MHK, Ghalami H, Amidpour M, Hamedi MH (2012c) A new targeting method for combined heat, power and desalinated water production in total site. J Desalination 307:51-61. doi: 10.1016/j.desal.2012.08.030
26. Manesh MHK, Abadi SK, Amidpour M, Ghalami H, Hamedi MH (2012d) New emissions targeting strategy for site utility of process industries. J Korean J Chem Eng. doi: 10.1007/s11814-012-0218-6
27. Manesh MHK, Navid P, Amidpour M, Hamedi MH (2013a) New procedure for optimal design of cogeneration system with considering environmental impacts and total cost. J Clean Technol Environ Policy. doi: 10.1007/s10098-012-0576-0
28. Manesh MHK, Amidpour M, Abadi SK, Hamedi MH (2013b) A new cogeneration targeting procedure for total site utility system. J Appl Therm Eng. doi: 10.1016/j.applthermaleng.2013.01.043
29. Mavromatis SP, Kokossis AC (1998) Conceptual optimization of utility networks for operational variations - I. targets and level optimization. Chem Eng Sci 53(8):1585-1608 (Pubitemid 28278764)
30. Medina-Flores JM, Pico'n-Nu'ñez M (2010) Modelling the power production of single and multiple extraction steam turbines. Chem Eng Sci 65:2811-2820
31. Meyer L, Tsatsaronis G, Buchgeister J, Schebek L (2009) Exergo-environmental analysis for evaluation of the environmental impact of energy conversion systems. Energy Int J 34:75-89
32. Mohan T, El-Halwagi MM (2007) An algebraic targeting approach for effective utilization of biomass in combined heat and power systems through process integration. Clean Technol Environ Policy 9:13-25
33. Morosuk T, Tsatsaronis G, Boyano A, Gantiva C (2012) Advanced exergy-based analyses applied to a system including LNG regasification and electricity generation. Int J Energy Environ Eng 3:1
34. Petrakopoulou F (2010) Comparative evaluation of power plants with CO2 capture: thermodynamic, economic and environmental performance. Ph.D. Thesis, Technische Universität Berlin, Germany
35. Raissi K (1994) Total site integration. Ph.D. Thesis, UMIST, Manchester, England
36. Salisbury JK (1942) The steam turbine regenerative cycle - an analytical approach. ASME Trans 64:231-245
37. Sima Pro (2007) User's manual. Pre Consultants BV, Amersfoort
38. Sorin M, Hammache A (2005) A new thermodynamic model for shaft work targeting on total sites. Appl Therm Eng 25:961-972
39. Tibi NA, Arman H (2007) A linear programming model to optimize the decision-making to managing cogeneration system. Clean Technol Environ Policy 9:235-240
40. Tokos H, Pintarič ZN, Krajnc D (2012) An integrated sustainability performance assessment and benchmarking of breweries. Clean Technol Environ Policy 14:173-193
41. Tora EA, El-Halwagi MM (2009) Optimal design and integration of solar systems and fossil fuels for sustainable and stable power outlet. Clean Technol Environ Policy 11:401-407
42. Tsatsaronis G, Cziesla F (2002) Encyclopedia of physical science and technology. Academic Press 16:659-680
43. Tsatsaronis G, Morosuk T (2008a) A general exergy-based method for combining a cost analysis with an environmental impact analysis. Part I - theoretical development. In: Proceedings of the ASME international mechanical engineering congress and exposition (IMECE2008-67218), Boston, 31 October-6 November 2008
44. Tsatsaronis G, Morosuk T (2008b) A general exergy-based method for combining a cost analysis with an environmental impact analysis. Part II - application to a cogeneration system. In: Proceedings of the ASME international mechanical engineering congress and exposition (IMECE2008-67219), Boston, 31 October-6 November 2008
45. Tsatsaronis G, Morosuk T, Cziesla F (2009) LNG-based cogeneration systems. Part 2. Advanced exergy-based analyses of a concept. Paper presented at the ASME 2009 international mechanical engineering congress and exposition (IMECE2009-10460), Lake Buena Vista, Florida, 13-19 November 2009
46. Ubando TA, Culaba AB, Aviso KB, Tan RR (2013) Simultaneous carbon footprint allocation and design of trigeneration plants using fuzzy fractional programming. Clean Technol Environ Policy 15:823-832
47. Varbanov PS, Doyle S, Smith R (2004) Modeling and optimization of utility systems. Chem Eng Res Des A 82(5):561-5778 (Pubitemid 38673159)