Removal of Bisphenol A from Aqueous Solution by Molecularly Imprinted Polymers

Separation Science and Technology (Philadelphia)

Volumn 49, Issue 11, 2014, Pages 1643-1653

  Wolska, Joanna ^a   Bryjak, Marek ^a  

^a WROCLAW UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

Bisphenol A; hybrid process; molecularly imprinted polymers; polymeric microspheres; sorption

Indexed keywords

ACRYLIC MONOMERS; ADSORPTION; EMULSIFICATION; ESTERS; MICROSPHERES; MIXTURES; PHENOLS; POLYMERIZATION; SORPTION;

BIS-PHENOL A; ETHYLENE GLYCOL DIMETHACRYLATE; HYBRID PROCESS; MEMBRANE EMULSIFICATION; MOLECULARLY IMPRINTED MICROSPHERES; MOLECULARLY IMPRINTED POLYMER; POLYMERIC MICROSPHERE; SUSPENSION POLYMERIZATION;

POLYMERS;

EID: 84904465612     PISSN: 01496395     EISSN: 15205754     Source Type: Journal    
DOI: 10.1080/01496395.2014.906459     Document Type: Article

References (52)

1. Coughlin, J. L.; Winnik, B.; Buckley, B. (2011) Measurement of bisphenol A, bisphenol A ß-D-glucuronide, genistein, and genistein 4′-ß-D-glucuronide via SPE and HPLC-MS/MS. Anal. Bioanal. Chem., 401: 995.
2. Shin, H. -S.; Park, Ch. -h.; Park, S. -J.; Pyo, H. (2001) Sensitive determination of bisphenol A in environmental water by gas chromatography with nitrogen-phosphorus detection after cyanomethylation. J. Chromatogr. A, 912: 119.
3. Rodriguez-Mozaz, S.; Lopez de Alda, M.; Barcelo, D. (2005) Analysis of bisphenol A in natural waters by means of an optical immunosensor. Water Research, 39: 5071.
4. WHO and FAO: Bisphenol A (BPA) - "Current state of knowledge and future actions", http://www.who.int/foodsafety/pub3ications/fsmanagement/No05BisphenolANovQ9en.pdf
5. Scientific Opinion on Bisphenol A: Evaluation of a study investigating its neurodevelopmental toxicity, review of recent scientific literature on its toxicity and advice on the Danish risk assessment of Bisphenol A; EFSA Panel on food contact materials, enzymes, flavourings and processing aids (CEF) European Food Safety Authority (EFSA), Parma, Italy, EFSA Journal, 8(9): (2010), p. 1829, http://www.efsa.europa.eu/en/efsajournal/doc/1829.pdf
6. Zhao, Ch.; Wei, Q.; Yang, K.; Liu, X.; Nomizu, M.; Nishi, N. (2004) Preparation of porous polysulfone beads for the selective removal of endocrine disruptors. Sep. Purif. Technol., 40: 297.
7. Bodzek, M.; Dudziak, M. (2006) Removal of natural estrogens and synthetic compounds considered to be Endocrine Disrupting Substances (EDs) by coagulation and nanofiltration. Polish J. Environ. Studies, 15: 35.
8. Zhang, Z.; Hu, J. (2010) Effect of environmental factors on estrogenic compounds adsorption by MIP. Water Air Soil Pollut., 210: 255.
9. Prieto, A.; Vollejo, A.; Zuloga, O.; Pachke, A.; Sellergan, B.; Schillinger, E.; Schrader, S.; Mo{double acute}der, M. (2011) Selective determination of estrogenic compounds in water by microextraction by packed sorbents and a molecularly imprinted polymer coupled with large volume injection-in-port-derivatization gas chromatography-mass spectrometry. Anal. Chim. Acta, 703: 41.
10. Bautista-Toledo, I.; Ferro-Garciäa, M. A.; Rivera-Utrilla, J.; Moreno-Castilla, C.; Vegas-Fernández, F. J. (2005) Bisphenol A removal from water by activated carbon: Effects of carbon characteristics and solution chemistry. Environ. Sci. Technol., 39: 6246.
11. Daas, A.; Hamdaoui, O. (2010) Extraction of bisphenol A from aqueous solutions by emulsion liquid membrane. J. Membr. Sci., 348: 360.
12. Dudziak, M.; Bodzek, M. (2008) The nanofiltration separation of bisphenol A under the conditions of saturation of the membrane surface. Polish J. Environ. Studies, 30: 17.
13. 3 for oxidative degradation of Bisphenol A. ACS Catalysis, 1: 1193.
14. Lin, K.; Liu, W.; Gan, J. (2009) Oxidative removal of Bisphenol A by manganese dioxide: Efficacy, products, and pathways. Environ. Sci. Technol., 43: 3860.
15. 2-zeolite sheets prepared by a papermaking technique. Environ. Sci. Technol., 37: 1048.
16. Huang, Q.; Weber Jr., W. J. (2005) Transformation and removal of Bisphenol A from aqueous phase via peroxidase-mediated oxidative coupling reactions: Efficacy, products, and pathways. Environ. Sci. Technol., 39: 6029.
17. Koltuniewicz, A.; Witek, A.; Bezak, K. (2004) Efficiency of membrane-sorption integrated processes. J. Membr. Sci., 239: 129.
18. Wolska, J.; Bryjak, M.; Kabay, N. (2010) Polymeric microspheres with N-methyl-d-glucamine ligands for boron removal from water solution by adsorption-membrane filtration process. Environ. Geochem. Health, 32: 349.
19. Ma, G.; Li, J. (2004) Compromise between dominant polymerization mechanisms in preparation of polymer microspheres. Chem. Engineering Sci., 59: 1711.
20. Kawaguchi, H. (2000) Functional polymer microspheres. Prog. Polym. Sci., 25: 1171.
21. Chai, Z.; Zheng, X.; Sun, X. (2003) Preparation of polymer microspheres from solutions. J. Polym. Sci. B: Polym. Physics, 41: 159.
22. Ma, G. -H.; Sone, H.; Omi, S. (2004) Preparation of uniform-sized polystyrene-polyacrylamide composite microspheres from a W/O/W emulsion by membrane emulsification technique and subsequent suspension polymerization. Macromolecules, 37: 2954.
23. Samatya, S.; Kabay, N.; Tuncel, A. (2010) A hydrophilic matrix for boron isolation: Monodisperse-porous poly(glycidyl methacrylate-co-ethylene dimethacrylate) particles carrying diol functionality. React. Funct. Polym,. 70: 555.
24. Samatya, S.; Kabay, N.; Tuncel, A. (2010) Comparative boron removal performance of monodisperse-porous particles with molecular brushes via "click chemistry" and direct coupling. Coll. Surf. A: Physicochem. Eng. Aspects, 372: 102.
25. Okubo, M.; Fukami, N.; Ito, A. (1997) Effect of molecular weight on preparation of nanoparticles by particle dissolution method from submicron-sized ionized styrene-methacrylic acid copolymer particles in nonionic emulsifier solution. J. Appl. Polym. Sci., 66: 1461.
26. Bin, W.; Shujun, W.; Hongguang, S.; Hongyan, L.; Jie, L.; Ning, L. (2009) A review of recent progress in preparation of hollow polymer microspheres. Pet. Sci., 6: 306.
27. Zhou, H.; Shi, T.; Zhou, X. (2013) Preparation of polystyrene/SiO2 microsphere via Pickering emulsion polymerization: Synergistic effect of SiO2 concentrations and initiator sorts. Appl. Surf. Sci., 266: 33.
28. Martin, C.; Raminez, L.; Cuellar, J. (2003) Stainless steel microbeads coated with sulfonated polystyrene-co-divinylbenzene. Surf. Coatings Technology, 165: 58.
29. Song, C.; Ding, L.; Yao, F.; Deng, J.; Yang, W. (2013) β-Cyclodextrin-based oil-absorbent microspheres: Preparation and high oil absorbency. Carbohydrate Polymers, 91: 217.
30. Wolska, J.; Bryjak, M. (2011) Preparation of polymeric microspheres for removal of boron by means of sorption-membrane filtration hybrid. Desalination, 283: 193.
31. Sugiura, S.; Nakajima, M.; Seki, M. (2002) Preparation of monodispersed polymeric microspheres over 50 μm employing microchannel emulsification. Ind. Eng. Chem. Res., 41(16): 4043.
32. Sanbe, H.; Haginaka, J. (2003) Uniformly sized molecularly imprinted polymers for bisphenol A and β-estradiol: Retention and molecular recognition properties in hydro-organic mobile phases. J. Pharm. Biomed. Anal., 30: 1835.
33. Mayes, A. G.; Mosbach, K. (1996) Molecularly imprinted polymer beads: Suspension polymerisation using a liquid perfluorocarbon as the dispersing phase. Anal. Chem., 68(21): 3769.
34. Jantarat, C.; Tangthong, N.; Songkro, S.; Martin, G. P.; Suedee, R. (2008) S-Propranolol imprinted polymer nanoparticle-on-microsphere composite porous cellulose membrane for the enantioselectively controlled delivery of racemic propranolol. Int. J. Pharm., 349: 212.
35. Haginaka, J.; Takehira, H.; Hosoya, K.; Tanaka, N. (1998) Molecularly imprinted uniform-sized polymer-based stationary phase for naproxen: Comparison of molecular recognition ability of the molecularly imprinted polymers prepared by thermal and redox polymerization techniques. J. Chromatogr. A, 816: 113.
36. Hiratsuka, Y.; Funaya, N.; Matsunaga, H.; Haginaka, J. (2013) Preparation of magnetic molecularly imprinted polymers for bisphenol A and its analogues and their application to the assay of Bisphenol A in river water. J. Pharm. Biomedical Analysis 75: 180.
37. Yao, J.; Li, X.; Qin, W. (2008) Computational design and synthesis of molecular imprinted polymers with high selectivity for removal of aniline from contaminated water. Anal. Chim. Acta, 610: 282.
38. Haginaka, J.; Takehira, H.; Hosoya, K.; Tanaka, N. (1999) Uniform-sized molecularly imprinted polymer for (S)-naproxen selectively modified with hydrophilic external layer. J. Chromatogr. A, 849: 331.
39. Zhang, J-H.; Jiang, M.; Zou, J.; Shi, D.; Mei, S-r; Zhu, Y-x; Shi, Y.; Dai, K.; Lu, B. (2006) Selective solid-phase extraction of bisphenol A using molecularly imprinted polymers and its application to biological and environmental samples. Anal. Bioanlal. Chem., 385: 780.
40. Yoshimatsu, K.; Reimhult, K.; Krozer, A.; Mosbach, K.; Sode, K.; Ye, L. (2007) Uniform molecularly imprinted microspheres and nanoparticles prepared by precipitation polymerization: The control of particle size suitable for different analytical applications. Anal. Chim. Acta, 584: 112.
41. Wolska, J.; Bryjak, M. (2012) Sorption of phthalates on molecularly imprinted polymers. Sep. Sci. Technol., 47: 1316-1321.
42. Ye, L.; Comark, P. A. G.; Mosbach, K. (2001) Molecular imprinting on microgel spheres. Anal. Chim. Acta, 435: 187.
43. Haginaka, J.; Takehira, H.; Hosoya, K.; Tanaka, N. (1999) Uniform-sized molecularly imprinted polymer for (S)-naproxen selectively modified with hydrophilic external layer. J. Chromatogr.,849: 331.
44. Takeuchi, T.; Haginaka, J. (1999) Separation and sensing based on molecular recognition using molecularly imprinted polymers. J. Chromatogr. B. 728 (1): 1.
45. Mayes, A. G.; Mosbach, K. (1997) Molecularly imprinted polymers: Useful materials for analytical chemistry? Trends Anal. Chem., 16: 321.
46. Andersson, L. I. (2000) Molecular imprinting: Developments and applications in the analytical chemistry field. J. Chromatogr. B., 745: 3.
47. Kosvintsev, S. R.; Gasparini, G.; Holdich, R. G.; Cumming, I. W.; M. T. Stillwell, M. T. (2005) Liquid-liquid membrane dispersion in a stirred cell with and without controlled shear. Ind. Eng. Chem. Res., 44: 9323.
48. Samatya, S.; Kabay, N.; Yuksel, U.; Arda, M.; Yuksel, M. (2006) Removal of nitrate from aqueous solution by nitrate selective ion exchange resins. React. Funtc. Polym., 66:1206.
49. Kałe{ogonek}dkowski, A.; Trochimczuk, A. W. Chelating resin containing hybrid calixpyrroles: New sorbent for noble metal cations. React. Funct. Polym 66: 957.
50. Cela-Pérez, M. C.; Castro-López, M. M.; Lasagabáster-Latorre, A.; J. M. López-Vilarino, J. M.; González-Rodriuez, M. V.; Barral-Losada, L. F. (2011) Synthesis and characterization of bisphenol-A imprinted polymer as a selective recognition receptor. Anal. Chem. Acta, 706: 275.
51. Kabay, N.; Yilmaz, I.; Bryjak, M.; Yuksel, M. (2006) Removal of boron from aqueous solutions by a hybrid Ion exchange-membrane process. Desalination, 198:158.
52. Yi{dotless}lmaz-Ipek, I.; Kabay, N.; Yüksel, M.; Yapi{dotless}c, D.; Yüksel, Ü. (2012) Application of adsorption-ultrafiltration hybrid method for removal of phenol from water by hypercrosslinked polymer adsorbents. Desalination, 306: 24.