Generalized response surface model updating using time domain data

Journal of Structural Engineering (United States)

Volumn 140, Issue 8, 2014, Pages

  Shahidi, S Golnaz ^a   Pakzad, Shamim N ^a  

^a Lehigh University   (United States)

Author keywords

Finite element; Model updating; Nonlinear models; Response surface; Structural health monitoring

Indexed keywords

COMPUTER SIMULATION; DESIGN; ITERATIVE METHODS; NONLINEAR SYSTEMS; STRUCTURAL HEALTH MONITORING; SURFACE PROPERTIES;

FINITE-ELEMENT MODEL UPDATING; LINEAR AND NONLINEAR MODELS; MODEL UPDATING; NON-LINEAR MODEL; PRESENCE OF MEASUREMENT NOISE; RESPONSE SURFACE; RESPONSE SURFACE MODELING; TRIAL-AND-ERROR APPROACH;

FINITE ELEMENT METHOD;

EID: 84904462458     PISSN: 07339445     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)ST.1943-541X.0000915     Document Type: Article

References (49)

1. Baruch, M. (1978). " Optimization procedure to correct stiffness and flexibility matrices using vibration tests." AIAA J., 16 (11), 1208-1210. AIAJAH 0001-1452 10.2514/3.61032
2. Baruch, M. (1984). " Methods of reference basis for identification of linear dynamic structures." AIAA J., 22 (4), 561-564. AIAJAH 0001-1452 10.2514/3.48481
3. Bell, E., Sanayei, M., Javdekar, C., and, Slavsky, E. (2007). " Multiresponse parameter estimation for finite-element model updating using nondestructive test data." J. Struct. Eng., 10.1061/(ASCE)0733-9445(2007) 133:8(1067), 1067-1079. JSENDH 0733-9445
4. Berman, A., and, Nagy, E. J. (1983). " Improvement of a large analytical model using test data." AIAA J., 21 (8), 1168-1173. AIAJAH 0001-1452 10.2514/3.60140
5. Box, G. E. P., and, Draper, N. R. (1987). Empirical model-building and response surfaces, Wiley, New York.
6. Brownjohn, J. M. W., and, Xia, P. (2000). " Dynamic assessment of curved cable-stayed bridge by model updating." J. Struct. Eng., 10.1061/(ASCE)0733-9445(2000)126:2(252), 252-260. JSENDH 0733-9445
7. Brownjohn, J. M. W., Xia, P., Hao, H., and, Xia, Y. (2001). " Civil structure condition assessment by finite element model updating: methodology and case studies." Finite Elem. Anal. Des., 37 (10), 761-775. FEADEU 0168-874X 10.1016/S0168-874X(00)00071-8
8. Cundy, A. L. (2002). " Use of response surface metamodels in damage identification of dynamic structures." M. S. thesis, Virginia Polytechnic Institute and State Univ., Blacksburg, VA.
9. Deng, L., and, Cai, C. S. (2010). " Bridge model updating using response surface method and genetic algorithm." J. Bridge Eng., 10.1061/(ASCE)BE.1943-5592.0000092, 553-564. JBENF2 1084-0702
10. Dorvash, S., Pakzad, S. N., and, Cheng, L. (2013). " An iterative modal identification algorithm for structural health monitoring using wireless sensor networks." Earthquake Spectra, 29 (2), 339-365. EASPEF 8755-2930 10.1193/1.4000133
11. Dorvash, S., Pakzad, S. N., Naito, C. J., Yen, B., and, Hodgson, I. C. (2012). " Application of state-of-the-art in measurement and data analysis techniques for vibration evaluation of a tall building." Struct. Infrastruct. Eng. 1744-8980 10.1080/15732479.2012.757795
12. Fang, S. E., and, Perera, R. (2009). " A response surface methodology-based damage identification technique." Smart Mater. Struct., 18 (6), 065009. SMSTER 0964-1726 10.1088/0964-1726/18/6/065009
13. Friswell, M. I., Inman, D. J., and, Pilkey, D. F. (1998). " The direct updating of damping and stiffness matrices." AIAA J., 36 (3), 491-493. AIAJAH 0001-1452 10.2514/2.396
14. Friswell, M. I., and, Mottershead, J. E. (1995). Finite element model updating in structural dynamics, Kluwer Academic Publishers, Dordrecht, Netherlands.
15. Guo, Q. T., and, Zhang, L. M. (2004). " Finite element model updating based on response surface methodology." Proc., IMAC-XXII: Conf. and Exposition on Structural Dynamics, Society for Experimental Mechanics, Bethel, CT.
16. Heinonen, O., and, Pajunen, S. (2011). " Optimal design of stiffened plate using metamodeling techniques." J. Struct. Mech., 44 (3), 218-230. JSMHA2 0360-1218
17. Hua, X., Ni, Y., Chen, Z., and, Ko, J. (2009). " Structural damage detection of cable-stayed bridges using changes in cable forces and model updating." J. Struct. Eng., 10.1061/(ASCE)0733-9445(2009)135:9(1093), 1093-1106. JSENDH 0733-9445
18. Imregun, M., and, Visser, W. J. (1991). " A review of model updating techniques." Shock Vib. Dig., 23 (1), 9-20. SHVDAN 0583-1024 10.1177/058310249102300102
19. Jaishi, B., and, Ren, W. X. (2007). " Finite element model updating based on eigenvalue and strain energy residuals using multiobjective optimization technique." Mech. Syst. Signal Process, 21 (5), 2295-2317. 0888-3270 10.1016/j.ymssp.2006.09.008
20. Jang, S., Spencer, B. F., Rice, J. A., and, Wang, Z. (2011). " Full-scale experimental validation of high fidelity wireless measurement using a historic truss bridge." Adv. Struct. Eng., 14 (1), 93-101. 1369-4332 10.1260/1369-4332.14.1.93
21. Johnson, R. A., and, Bhattacharyya, G. K. (2009). Statistics: Principles and methods, Wiley, New York.
22. Kariya, T., and, Karuta, H. (2004). Generalized least squares, Wiley, New York.
23. Lynch, J. P., and, Kenneth, K. J. (2006). " A summary review of wireless sensors and sensor networks for structural health monitoring." Shock Vib. Dig., 38 (2), 91-128. SHVDAN 0583-1024 10.1177/0583102406061499
24. Lynch, J. P., Sundararajan, A., Law, K. H., Kiremidjian, A. S., Kenny, T., and, Carryer, E. (2003). " Embedment of structural monitoring algorithms in a wireless sensing unit." Struct. Eng. Mech., 15 (3), 285-297. SEGMEQ 1225-4568 10.12989/sem.2003.15.3.285
25. Marwala, T. (2004). " Finite element model updating using response surface method." AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 7, 5165-5173. 10.2514/6.2004-2005
26. Marwala, T. (2010). Finite element model updating using computational intelligence techniques:Applications to structural dynamics, Springer, Heidelberg, Germany.
27. Mazzoni, S., Mckenna, F., Scott, M. H., and, Fenves, G. (2009). OpenSees command language manual, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA.
28. Moaveni, B., and, Behmanesh, I. (2012). " Effects of changing ambient temperature on finite element model updating of the Dowling Hall footbridge." Eng. Struct., 43 (10), 58-68. ENSTDF 0141-0296 10.1016/j.engstruct.2012.05.009
29. Moaveni, B., Stavridis, A., Lombaert, G., Conte, J., and, Shing, P. (2013). " Finite element model updating for assessment of progressive damage in a three story infilled RC frame." J. Struct. Eng., 10.1061/(ASCE)ST.1943-541X.0000586, 1665-1674. JSENDH 0733-9445
30. Montgomery, D. C. (2001). Design and analysis of experiments, Wiley, New York.
31. Montgomery, D. C., Peck, E. A., and, Vining, G. G. (2004). Introduction to linear regression analysis, Wiley, New York.
32. Mottershead, J. E., Link, M., and, Friswell, M. I. (2011). " The sensitivity method in finite element model updating: A tutorial." Mech. Syst. Signal Process, 25 (7), 2275-2296. 0888-3270 10.1016/j.ymssp.2010.10.012
33. Nocedal, J., and, Wright, S. J. (2006). Numerical optimization, Springer, New York.
34. Ren, W. X., and, Chen, H. B. (2010). " Finite element model updating in structural dynamics by using the response surface method." Eng. Struct., 32 (8), 2455-2465. ENSTDF 0141-0296 10.1016/j.engstruct.2010.04.019
35. Ren, W. X., Fang, S. E., and, Deng, M. Y. (2011). " Response surface-based finite element model updating using structural static responses." J. Eng. Mech., 10.1061/(ASCE)EM.1943-7889.0000223, 248-257. JENMDT 0733-9399
36. Ribeirio, D., Calcada, R., Delgado, R., Brehm, M., and, Zabel, V. (2012). " Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters." Eng. Struct., 40 (7), 413-435. ENSTDF 0141-0296 10.1016/j.engstruct.2012.03.013
37. Roux, W. J., Stander, N., and, Haftka, R. T. (1998). " Response surface approximation for structural optimization." Int. J. Numer. Methods Eng., 42 (3), 517-534. IJNMBH 0029-5981 10.1002/(ISSN)1097-0207
38. Schultze, J. F., Hemez, F. M., Doebling, S. W., and, Sohn, H. (2001). " Application of non-linear system model updating using feature extraction and parameter effect analysis." Shock Vib., 8, 325-337. SHVIE8 1070-9622
39. Silva, S., Cogan, S., Foltete, E., and, Buffe, F. (2009). " Metrics for non-linear model updating in mechanical systems." J. Braz. Soc. Mech. Sci. Eng., 31 (1), 27-34.
40. Wang, H., Li, A., and, Li, J. (2010). " Progressive finite element model calibration of a long-span suspension bridge based on ambient vibration and static measurements." Eng. Struct., 32 (9), 2546-2556. ENSTDF 0141-0296 10.1016/j.engstruct.2010.04.028
41. Weber, B., and, Paultre, P. (2010). " Damage identification in a truss tower by regularized model updating." J. Struct. Eng., 10.1061/(ASCE)ST.1943-541X.0000105, 307-316. JSENDH 0733-9445
42. Whelan, M. J., and, Janoyan, K. D. (2009). " Design of a robust, high-rate wireless sensor network for static and dynamic structural monitoring." J. Intel. Mater. Syst. Struct., 20 (7), 849-864. JMSSER 1045-389X 10.1177/1045389X08098768
43. Yang, Y. B., and, Chen, Y. J. (2009). " A new direct method for updating structural models based on measured modal data." Eng. Struct., 31 (1), 32-42. ENSTDF 0141-0296 10.1016/j.engstruct.2008.07.011
44. Zaurin, R., and, Catbas, F. N. (2010). " Integration of computer imaging and sensor data for structural health monitoring of bridges." Smart Mater. Struct., 19 (1), 015019. SMSTER 0964-1726 10.1088/0964-1726/19/1/015019
45. Zhang, L. M., Fei, Q., and, Guo, Q. T. (2005). " Dynamic finite element model updating using meta-model and genetic algorithm." Proc., IMAC-XXIII: Conf. and Exposition on Structural Dynamics, Society for Experimental Mechanics, Bethel, CT.
46. Zhang, L. M., and, Guo, Q. T. (2007). " A case study of model updating and validation of a frame structure with highly non-linear component." Proc., IMAC-XXV: Conf. and Exposition on Structural Dynamics, Society for Experimental Mechanics, Bethel, CT.
47. Zhang, Q. W., Chang, C. C., and, Chang, T. Y. P. (2000). " Finite element model updating for structures with parametric constraints." Earthquake Eng. Struct., 29 (7), 927-944. IJEEBG 1096-9845 10.1002/(ISSN)1096- 9845
48. Zimmerman, A. T., and, Lynch, J. P. (2009). " A parallel simulated annealing architecture for model updating in wireless sensor networks." IEEE Sens. J., 9 (11), 1503-1510. ISJEAZ 1530-437X 10.1109/JSEN.2009.2019323
49. Zona, A., Barbato, M., and, Fragiacomo, M. (2012). " Finite-element model updating and probabilistic analysis of timber-concrete composite beams." J. Struct. Eng., 10.1061/(ASCE)ST.1943-541X.0000509, 899-910. JSENDH 0733-9445