Cernent sheath integrity during hydraulic fracturing: An integrated modeling approach

Society of Petroleum Engineers - SPE Hydraulic Fracturing Technology Conference 2014

Volumn , Issue , 2014, Pages 826-843

  Wang, W ^a   Dahi Taleghani, A ^a  

^a Louisiana State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOREHOLES; CEMENTS; CRACKS; FRACTURE; GROUNDWATER; HORIZONTAL WELLS; OIL FIELD EQUIPMENT; WATER POLLUTION;

COMPLEX GEOLOGICAL CONDITION; DELAMINATION FRACTURE; FRACTURE PROPAGATION; HYDRAULIC FRACTURING TREATMENTS; INITIATION AND PROPAGATION; INTEGRATED MODELING APPROACHES; LOW CONFINING PRESSURE; VERTICAL AND HORIZONTAL WELLS;

HYDRAULIC FRACTURING;

EID: 84904416024     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (50)

1. Abass, H.H., Hedayati, S., and Meadows, D.L., 1996, Nonplanar fracture propatation from a horizontal wellbore: Experimental study. SPE Production & Facilities, 11(3): 133-137.
2. Batchelor, G.K., 1967, An Introduction to Fluid Dynamics, Cambridge University Press, London, pp: 615-620.
3. Ballard, T.J., Beare, S.P., and Lawless, T.A., 1994, Fundamentals of Shale Stabilisation: Water Transport through Shales, SPE 24974-PA, SPE Formation Evaluation, Vol. 9 (2), pp: 129-134.
4. Biot, M.A., 1941, General theory of three dimensional consolidation, J. Appl. Phys., 12(2), pp: 155-164.
5. Bois, A.P., Garnier, A., Laudet, J.B., 2012, Use of a Mechanistic Model To Forecast Cement-Sheath Integrity, SPE Drilling & Completion, Vol. 27(2), pp: 303-314.
6. Bourgoyne, A.T., Chenevert, M.E., Mülheim, K.K., and Young, F.S., 1986, Applied Drilling Engineering, Society of Petroleum Engineering Vol. 2, pp: 312-324.
7. Carter, L. G., and Evans., G. W., 1964, A study of cement-pipe bonding. Journal of Petroleum Technology, 16(2), 157-160.
8. Carrier, B., Granet, S., 2011, Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model, Engineering Fracture Mechanics 79 (2012), pp: 312-328.
9. Camacho, G.T., Ortiz, M., 1996, Computational modeling of impact damage in brittle materials, Int. J. Solids Structures 33, pp: 2899-2938.
10. Charalambides, P.G., Lund, J., Evans, A.G., and McMeeking, R.M., 1989, A Test Specimen for Determining the Fracture Resistance of Bimaterial Interfaces, Journal of Applied Mechanics, 56, pp: 77-82.
11. Chen, J., Crisfield, M.A., Kinloch, A.J., Busso, E.P., Matthews, F.L., and Qiu, Y., 1999, Predicting Progressive Delamination of Composite Material Specimens Via Interface Elements, Mechanics of Composite Materials and Structures 6, pp: 301-17.
12. Chen, Z.R., 2011, Finite element modelling of viscosity-dominated hydraulic fractures, Journal of Petroleum Science and Engineering, 88-89 (2012), pp: 136-144.
13. Close, S., and Zbib, H.M., 1996, The stress intensity factors and interaction between cylindrical cracks in fiber-matrix composites. In: Voyiadjis, G.Z., Allen, D.H. (eds), Damage and interfacial Debonding in Composites. Elsevier Science B.V, pp: 3-27.
14. Dahi-Taleghani, A., J. E. Olson, and W. Wang, 2013, Thermal Reactivation of Microfractures and its potential impact on Hydraulic Fractures Efficiency, SPE-163872-PP, presented at 2013 SPE Hydraulic Fracturing Technology Conference to be held 4-6 February, 2013 in The Woodlands, TX, USA.
15. Dahi-Taleghani, A., P. Puyang, 2013, Post-Treatment Assessment of Induced Fracture Networks, SPE-166354-MS presented in SPE Annual Technical Conference & Exhibition in New Orleans, LA, USA.
16. Dahi Taleghani, A., Wang, W., 2013, Emergence of Delamination Fractures around the Casing and Its Stability, International Journal of Geomechanics, Under review.
17. Dávila, C. G., Camanho, P.P., and Moura, M.F., 2001, Mixed-Mode Decohesion Elements for Analyses With Progressive Delamination, 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (Seattle, Washington, U.S.A.).
18. Detournay, E., Cheng, A.H.D., 1991, Plane Strain Analysis of a Stationary Hydraulic Fracture in a Poroelastic Medium, International Journal of Solids and Structures, Vol. 37, No. 13, pp: 1645-1662.
19. Dhaliwal, R.S., Saxena, H.S., He, W.H., 1992, Stress Intensity Factor for the Cylindrical Interface Crack between Nonhomogeneous Coaxial Finite Elastic Cylinders, Eng. Fract. Mech. 43(6), pp: 1039-1051.
20. Economides, M.J., and Nolte, K.G., 2000, Reservoir Stimulation, John Wiley & Sons, LTD, Third Edition.
21. Farris, T.N., Kokini, K., Demir, I., 1989, The Cylindrical Crack. J. Appl. Mech. 56(4), pp: 981-983.
22. Gerstle, W.H., Xie, M., 1992, FEM Modeling of Fictitious Crack Propagation in Concrete, Journal of Engineering Mechnics, Vol. 118 (2), pp: 416-434.
23. Griffith, A.A., 1924, The Theory of Rupture, In Proc. Firstinternat. Congr. Appl. Mech.
24. Gordeliy, E., Piccinin, R., Napier, J.A.L., Detournay, E., 2013, Axisymmetric benchmark solutions in fracture mechanics, Engineering Fracture Mechanics, in press.
25. Hillerborg, A., Modeer, M., Petersson, P., 1976, Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements, Cement Concrete Res, Vol. 1976 (6), pp: 773-782.
26. Ladva, H.K.J., Craster, B., Jones, T.G.J., Goldsmith, G., and Scott, D., 2005, The Cement-to-Formation Interface in Zonal Isolation, SPE 88016-PA, SPE Drilling & Completion, Vol. 20, (3): 186-197.
27. Lecampion, B., 2012, Hydraulic Fracture Initiation From an Open-hole: Wellbore Size, Pressurization Rate And Fluid-solid Coupling Effects, SPE 2012-60146th U.S. Rock Mechanics/Geomechanics Symposium, June 24-27, 2012, Chicago, Illinois.
28. Lecampion, B., and Prioul, R., 2013, Competition Between Transverse And Axial Hydraulic Fractures In Horizontal Wells, SPE 163848-MS, 2013 SPE Hydraulic Fracturing Technology Conference, Feb 04-06, 2013 2013, The Woodlands, TX, USA
29. Li, C.Y., Weng, G.J., Duan, Z.P., 2001, Dynamic behavior of a cylindrical crack in a functionally graded interlayer under torsional loading. Int. J. Solid Struct, 36(42-43), pp: 7473-7485.
30. Li, H., and Chandra, N., 2003, Analysis of crack growth and crack-tip plasticity in ductile materials using cohesive zone models, International Journal of Plasticity 19 (2003), pp: 849-882
31. Mueller, D.T., Eid, R.N., 2006, Characterization of the Early Time Mechanical Behavior of Well Cements Employed in Surface Casing operations, SPE 98632, IADC/SPE Drilling Conference, Miami, Florida, 21-23 February 2006.
32. Needleman, A., 1990, An Analysis of Decohesion along an Imperfect Interface, International Journal of Fracture 42, 21-40.
33. Ozbek, T., Erdogan, F., 1969, Some Elastic prohlems in fiber-reinforced composites with imperfect bonds, Int. J. Eng. Sci. 7(9), pp: 931-946.
34. Oh, T.S., Rodel, J., Cannon, R.M., and Ritchie, R.O., 1988, Ceramic/Metal Interfacial Crack Growth, Toughening by Controlled Microcracks and Interfacial Goemetries, Acta Meterialia, 36, pp: 2083-2093.
35. Reeves, G. M., Sims, I., Cripps, J.C., 2006, Clay Materials Used in Construction: Engineering Geology Special Publication, Cromwell Press, Trowbridge, UK.
36. Rice, J. R. 1968, A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks, Journal of Applied Mechanics 31, pp: 379-86.
37. Reeder, J.R., and Crews, J.H., 1988, Mixed-Mode Bending Method for Delamination Testing, AIAA Journal, July, Vol. 28, No. 7, pp: 1270-1276.
38. Russell, A. J., 1982, On the Measurement of Mode II Interlaminar Fracture Energies, Defence Research Establishment Pacific, Victoria, Canada, DREP Materials Rept. 82-0, Dec. 1982.
39. Sarris, E., Papanastasiou, P., 2011, The influence of the cohesive process zone in hydraulic fracturing modelling. Int J Fract 2011; 167(1), pp: 33-45.
40. Saidin, S., Sonny, I., Nuruddin, M.F., 2008, A New Approach for Optimizing Cement Design to Eliminate Microannulus in Steam Injection Wells, SPE 12407-MS, International Petroleum Technology Conference, Kuala Lumpur, Malaysia, 3-5 December 2008.
41. Siegmund, T., Brocks, W., 2000. A numerical study on the correlation between the work of separation and the dissipation rate in ductile fracture, Engineering Fracture Mechanics 67, pp: 139-154.
42. Tvergaard, V., 2001, Resistance curves for mixed mode interface crack growth between dissimilar elastic-plastic solids. J. Mech. Phys. Solids 49, pp: 2689-2703.
43. Van de Ketterij, R.G., and de Pater, C.J., 1999, Impact of Perforations on hydraulic fracture tortuosity. SPE Production & Facilities, 14(2), pp: 131-138.
44. Waters, G., Heinze, J., Jackson, R., Ketter, A., Daniels, J., and Bentley, D., 2006, Use of Horizontal Well Image Tools to Optimize Barnett Shale Reservoir Exploitation, SPE 103202-MS, SPE Annual Technical Conference and Exhibition, 24-27 September 2006, San Antonio, Texas, USA.
45. Wang, H.F., 2000, Theory of Linear Poroelasticity with Applications to Goemechanics and Hydrogeology, Princeton University Press, Princeton and Oxford.
46. Weijers, Leen, de Pater, C.J., 1992, Fracture Reorientation in Model Tests, SPE 23790-MS, SPE Formation Damage Control Symposium, 26-27 February 1992, Lafayette, Louisiana.
47. Weijers, L., and de Pater, C.J., 1994, Geometry of hydraulic fractures induced from horizontal wellbores, SPE Production & Facilities, 9(2), pp: 87-92.
48. Xie, M., 1995, Finite element modeling of discrete crack propagation, PhD thesis, University of New Mexico, USA.
49. Yang, Z.J., Su, X.T., Chen, J.F., Liu, GH., 2009, Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-brittle Materials, International Journal of Solids and Structures, 2009, vol. 46(17), pp: 3222-3234.
50. Zbib, H.M., Hirth, J.P., Demir, I., 1995, The stress intensity factor of cylindrical cracks, International Journal of Engineering Science, Volume 33, Issue 2, January 1995, pp: 247-253.