Impact of machine tools on the direct energy and associated carbon emissions for a standardized NC toolpath

Re-Engineering Manufacturing for Sustainability - Proceedings of the 20th CIRP International Conference on Life Cycle Engineering

Volumn , Issue , 2013, Pages 197-202

  Balogun, Vincent Aizebeoje ^a   Aramcharoen, Ampara ^b   Mativenga, Paul Tarisai ^a   Chuan, Shaw Kah ^b  

^a UNIVERSITY OF MANCHESTER   (United Kingdom)

^b SINGAPORE INSTITUTE OF MANUFACTURING TECHNOLOGY   (Singapore)

Author keywords

Carbon dioxide footprint; Cutting; Energy footprint; Global manufacturing

Indexed keywords

CARBON DIOXIDE; CUTTING; GLOBAL WARMING; LIFE CYCLE; MANUFACTURE;

CARBON DIOXIDE EMISSIONS; CARBON EMISSIONS; ENERGY FOOTPRINT; ENERGY INTENSITY; GEOGRAPHICAL LOCATIONS; GLOBAL MANUFACTURING; MANUFACTURING COST; MECHANICAL MACHINING;

MACHINE TOOLS;

EID: 84904250257     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1007/978-981-4451-48-2_32     Document Type: Conference Paper

References (20)

1. Kordonowy, D. N. (2002): A Power Assessment of Machining Tools, BSc Thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.
2. Gutowski, T., Dahmus, J., Thiriez, A. (2006): Electrical Energy Requirements for Manufacturing Processes, in: Proceedings of the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium.
3. Dahmus, J., Gutowski, T. (2004): An Environmental Analysis of Machining, in: Proceedings of the ASME International Mechanical Engineering Congress and RD&D Exposition, pp. 1-10, Anaheim, California, USA.
4. Devoldere, T., Dewulf, W., Deprez, W., Willems, B., Duflou, J. (2007): Improvement Potential for Energy Consumption in Discrete Part Production Machines, in: Proceedings of the 14th CIRP International Conference on Life Cycle Engineering, pp. 311-316, Waseda University, Tokyo, Japan.
5. Diaz, N., Redelsheimer, E., Dornfeld, D. (2011): Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use, Glocalized Solutions for Sustainability in Manufacturing, in: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, pp. 263-267, Technische Universität Braunschweig, Braunschweig, Germany.
6. Vijayaraghavan, A., Dornfeld, D. (2010): Automated Energy Monitoring of Machine Tools, in: CIRP Annals-Manufacturing Technology, Vol. 59, No. 1, pp. 21-24.
7. Rajemi, M. F., Mativenga, P. T., Aramcharoen, A. (2010): Sustainable Machining: Selection of Optimum Turning Conditions Based on Minimum Energy Considerations, in: Journal of Cleaner Production, Vol. 18, No. 10-11, pp. 1059-1065.
8. Anderberg, S. E., Kara, S., Beno, T. (2010): Impact of Energy Efficiency on Computer Numerically Controlled Machining, in: Proceedings of the IMechE, Part B-Journal of Engineering Manufacture, Vol. 224, No. B4, pp. 531-541.
9. Li, W., Zein, A., Kara, S., Herrmann, C. ( 2011): An Investigation into Fixed Energy Consumption of Machine Tools, in: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, pp. 268-273, Technische Universität Braunschweig, Braunschweig, Germany.
10. Cao, H., Li, H., Cheng, H., Luo, Y., Yin, R., Chen, Y. (2012): A Carbon Efficiency Approach for Life-Cycle Carbon Emission Characteristics of Machine Tools, in: Journal of Cleaner Production, Vol. 37, pp. 19-28.
11. Branker, K., Jeswiet, J., Kim, I. Y. (2011): Greenhouse Gases Emitted in Manufacturing a Product-A New Economic Model, in: CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 53-56.
12. Diaz, N., Choi, S., Helu, M., Chen, Y., Jayanathan, S., Yasui, Y., Kong, D., Pavanaskar, S., Dornfeld, D. (2010): Machine Tool Design and Operation Strategies for Green Manufacturing, in: Proceedings of the 4th CIRP International Conference on High Performance Cutting, pp. 271-276.
13. Narita, H., Desmira, N., Fujimoto, H. (2008): Environmental Burden Analysis for Machining Operation Using LCA Method, in: Proceedings of the 41st CIRP Conference on Manufacturing Systems pp. 65-68, Tokyo, Japan.
14. Jeswiet, J., Kara, S. (2008): Carbon emissions and CES in manufacturing, in: CIRP Annals-Manufacturing Technology, Vol. 57, No. 1, pp. 17-20.
15. OECD/IEA CO2 Emissions from Fuel Combustion 2012-Highlights (Pre-Release) Available from: www. iea. org/publications/freepublications/publication/name,401 0,en. html (accessed: November 2012).
16. Department of Energy and Climate Change, Energy Digest of United Kingdom Energy Statistics (DUKES), Fuel mix disclosure data table, Available from: http://www. decc. gov. uk/en/content/cms/statistics/energy-stats/f uel-mix/fuel-mix. Aspx (accessed: October 2012).
17. Tan, R. B. H., Wijaya, D., Khoo, H. H. (2010): LCI (Life cycle inventory) Analysis of Fuels and Electricity Generation in Singapore, in: Energy, Vol. 35, No. 12, pp. 4910-4916.
18. Mori, M., Fujishima, M., Inamasu, Y., Oda, Y. (2011): A Study on Energy Efficiency Improvement for Machine Tools, in: CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 145-148.
19. He, Y., Liu, F., Wu, T., Zhong, F. P., Peng, B. (2012): Analysis and Estimation of Energy Consumption for Numerical Control Machining, in: Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, Vol. 226, No. B2, pp. 255-266.
20. Balogun, V. A., Mativenga, P. T. (2013): Modelling of Direct Energy Requirements in Mechanical Machining Processes, in: Journal of Cleaner Production, Vol. 41, pp. 179-186.