Rubber-clay nanocomposites

Polymer Nanocomposites

Volumn , Issue , 2006, Pages 297-325

  Mohammed, Abubaker ^a   Simon, George P ^a  

^a MONASH UNIVERSITY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

RUBBER-CLAY NANOCOMPOSITES;

CHEMISTRY;

EID: 84904144314     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9781845691127.1.297     Document Type: Chapter

References (62)

1. Brydson J.A. Rubbery Materials and their Compounds 1988, Elsevier Applied Science, London and New York.
2. Alexandre M., Dubois P. Polymer-layered silicate nanocomposites: Preparation, properties and uses of a new class of materials. Materials Science and Engineering: R: Reports 2000, 28(1-2):1-63.
3. Maniar K.K. Plastics Engineering. A Literature Survey on Nanocomposites 2002, University of Massachusetts Lowell, Massachusetts.
4. Marco, Z., L. Sergi, and C. Giovanni, Polymer Layered Silicate Nanocomposites. Macromolecular Rapid Communications.
5. Zhang L., et al. Morphology and mechanical properties of clay/styrene-butadiene rubber nanocomposites. Journal of Applied Polymer Science 2000, 78(11):1873-1878.
6. Arroyo M., Ló Pez-Manchado M.A., Herrero B. Organo-montmorillonite as substitute of carbon black in natural rubber compounds. Polymer 2003, 44(8):2447-2453.
7. Nah C., et al. Fracture behaviour of acrylonitrile-butadiene rubber/clay nanocomposite. Polymer International 2001, 50(11):1265-1268.
8. Usuki A., Tukigase A., Kato M. Preparation and properties of EPDM-clay hybrids. Polymer 2002, 43(8):2185-2189.
9. Chang Y.-W., et al. Preparation and properties of EPDM/organomontmorillonite hybrid nanocomposites. Polymer International 2002, 51(4):319-324.
10. Wu Y.-P., et al. Structure of carboxylated acrylonitrile-butadiene rubber (CNBR)-clay nanocomposites by co-coagulating rubber latex and clay aqueous suspension. Journal of Applied Polymer Science 2001, 82(11):2842-2848.
11. Duquesne S., et al. Elaboration of EVA-nanoclay systems - Characterization, thermal behaviour and fire performance. Composites Science and Technology 2003, 63(8):1141-1148.
12. Heinisch K.F. Dictionary of Rubbery 1966, Applied Science Publishers Ltd, London.
13. Hamed G.R. Material and Compounds. Engineering with Rubbers: How to Design Rubber Components 2001, 11-19. Hanser Gardner, Germany. A.N. Gent (Ed.).
14. Walker B.M. Handbook of Thermoplastic Elastomers 1979, Van Nostrand Reinhold, New York, xv, 345.
15. Barlow F.W. Rubber Compounding Principles, Materials, and Techniques 1988, Marcel Dekker, Inc., New York.
16. Hofmann W. Rubber Technology Handbook 1989, Hanser Publishers, Munich; New York, distributed in the USA by Oxford University Press. xxv, 611, 15, 18.
17. Whelan A., Lee K.S. Developments in Rubber Technology. 1. Improving product performance. Developments series 1979, Applied Science Publishers, London, x, 285p.
18. Morton M., American Chemical Society Rubber Technology 1973, Van Nostrand Reinhold, New York, Division of Rubber Chemistry, 603, viii. 2nd edn.
19. Markovic M.G., et al. Cure behavior of EPDM compounds influence of different accelerated sulfur systems. KGK-Kautschuk und Gummi Kunststoffe 1999, 52(3):170-175.
20. Van Duin M. Chemistry of EPDM cross-linking. KGK-Kautschuk und Gummi Kunststoffe 2002, 55(4):150-154.
21. Barlow F.W. Rubber Compounding: Principles, Materials, and Techniques 1988, M. Dekker, New York, ix, 325.
22. Moshev V.V., Evlampieva S.E. Filler-reinforcement of elastomers viewed as a triboelastic phenomenon. International Journal of Solids and Structures 2003, 40(17):4549-4562.
23. Siriwardena S., Ismail H., Ishiaku U.S. A comparison of white rice husk ash and silica as fillers in ethylene-propylene-diene terpolymer vulcanizates. Polymer International 2001, 50(6):707-713.
24. Rothon R.N., Rapra Technology Limited Particulate-filled Polymer Composites 2003, Rapra Technology, Shrewsbury, x, 544. 2nd edn.
25. Ono S., et al. Structure development in silica-filled rubber composites. Polymer International 1999, 48(10):1035-1041.
26. Sae-Oui P., Thepsuwan U., Hatthapanit K. Effect of curing system on reinforcing efficiency of silane coupling agent. Polymer Testing 2004, 23(4):397-403.
27. Ansarifar A., et al. Reinforcing Effect of Silica and Silane Fillers on the Properties of Some Natural Rubber Vulcanizates. Rubber Chemistry and Technology 2003, 76(5):1290.
28. Blow C.M., Institution of the Rubber Industry Rubber Technology and Manufacture 1971, 22:527. Butterworths for the Institution of the Rubber Industry, London.
29. Donnet J.-B., Bansal R.C., Wang M.-J. Carbon Black: Science and Technology 1993, Marcel Dekker, New York, xviii, 461. 2nd rev. and expand edn.
30. Rodgers B. Rubber Compounding: Chemistry and Applications 2004, Marcel Dekker, New York, viii, 645.
31. Evans C.W. Practical Rubber Compounding and Processing 1981, Applied Science, London, xiii, 205.
32. Wu J., et al. Preparation of modified ultra-fine mineral powder and interaction between mineral filler and silicone rubber. Journal of Materials Processing Technology 2003, 137(1-3 spec):40-44.
33. Kim K.-J., White J.L. Silica surface modification using different aliphatic chain length silane coupling agents and their effects on silica agglomerate size and processability. Composite Interfaces 2002, 9(6):541-556.
34. Schwaiger B., Blume A. Silica/silane - a winning reinforcement formula. Rubber World 2000, 222(1):32.
35. Choi S.-S., Nah C., Jo B.-W. Properties of natural rubber composites reinforced with silica or carbon black: Influence of cure accelerator content and filler dispersion. Polymer International 2003, 52(8):1382-1389.
36. Bokobza L., Rapoport O. Silica and carbon black reinforcement of natural rubber. Macromolecular Symposia 2003, 194:125-133.
37. Akiba M., Hashim A.S. Vulcanization and crosslinking in elastomers. Progress in Polymer Science (Oxford) 1997, 22(3):475-521.
38. Smith L.P. The Language of Rubber 1993, Butterworth-Heinemann Ltd., Oxford. 1st edn.
39. Mark J.E., Erman B., Eirich F.R. Science and Technology of Rubber 1994, Academic Press, San Diego, xvi, 751, [2] of plates. 2nd edn.
40. Dluzneski P.R. Peroxide Vulcanization of Elastomers. Rubber Chemistry and Technology 2001, 74(3):451.
41. Sinha Ray S., Okamoto M. Polymer/layered silicate nanocomposites: A review from preparation to processing. Progress in Polymer Science (Oxford) 2003, 28(11):1539-1641.
42. Karger-Kocsis J., Wu C.-M. Thermoset Rubber/Layered Silicate Nano-composites. Status and Future Trends. Polymer Engineering and Science 2004, 44(6):1083-1093.
43. Ló Pez-Manchado M.A., Herrero B., Arroyo M. Organoclay-natural rubber nanocomposites synthesized by mechanical and solution mixing methods. Polymer International 2004, 53(11):1766-1772.
44. Wang Y., et al. Preparation and characterization of rubber-clay nanocomposites. Journal of Applied Polymer Science 2000, 78(11):1879-1883.
45. Bala P., et al. Organomodified montmorillonite as filler in natural and synthetic rubber. Journal of Applied Polymer Science 2004, 92(6):3583-3592.
46. Ló Pez-Manchado M.A., Herrero B., Arroyo M. Preparation and characterization of organoclay nanocomposites based on natural rubber. Polymer International 2003, 52(7):1070-1077.
47. Ló Pez-Manchado M.A., et al. Vulcanization kinetics of natural rubber-organoclay nanocomposites. Journal of Applied Polymer Science 2003, 89(1):1-15.
48. Varghese S., Karger-Kocsis J. Melt-Compounded Natural Rubber Nanocomposites with Pristine and Organophilic Layered Silicates of Natural and Synthetic Origin. Journal of Applied Polymer Science 2004, 91(2):813-819.
49. Varghese S., Karger-Kocsis J. Natural rubber-based nanocomposites by latex compounding with layered silicates. Polymer 2003, 44(17):4921-4927.
50. Zheng H., et al. Influence of clay modification on the structure and mechanical properties of EPDM/montmorillonite nanocomposites. Polymer Testing 2004, 23(2):217-223.
51. Zheng H., et al. A comparison between cure systems for EPDM/montmorillonite nanocomposites. Polymers and Polymer Composites 2004, 12(3):197-206.
52. Gatos K.G., Thomann R., Karger-Kocsis J. Characteristics of ethylene propylene diene monomer rubber/organoclay nanocomposites resulting from different processing conditions and formulations. Polymer International 2004, 53(8):1191-1197.
53. Acharya H., et al. Synthesis and evaluation of high-performance ethylene-propylene-diene terpolymer/organoclay nanoscale composites. Journal of Applied Polymer Science 2004, 93(5):2429-2436.
54. Sadhu S., Bhowmick A.K. Preparation and properties of nanocomposites based on acrylonitrile-butadiene rubber, styrene-butadiene rubber, and polybutadiene rubber. Journal of Polymer Science, Part B: Polymer Physics 2004, 42(9):1573-1585.
55. Sadhu S., Bhowmick A.K. Preparation and Properties of Styrene-Butadiene Rubber Based Nanocomposites: The Influence of the Structural and Processing Parameters. Journal of Applied Polymer Science 2004, 92(2):698-709.
56. Kim J.-T., Oh T.-S., Lee D.-H. Preparation and characteristics of nitrile rubber (NBR) nanocomposites based on organophilic layered clay. Polymer International 2003, 52(7):1058-1063.
57. Hwang W.-G., Wei K.-H., Wu C.-M. Preparation and mechanical properties of nitrile butadiene rubber/silicate nanocomposites. Polymer 2004, 45(16):5729-5734.
58. Wu Y.-P., et al. Structure and properties of nitrile rubber (NBR)-clay nanocomposites by Co-coagulating NBR latex and clay aqueous suspension. Journal of Applied Polymer Science 2003, 89(14):3855-3858.
59. Wang S., et al. Synthesis and properties of silicone rubber/organomontmorillonite hybrid nanocomposites. Journal of Applied Polymer Science 1998, 69(8):1557-1561.
60. Hasegawa N., Okamoto H., Usuki A. Preparation and properties of ethylene propylene rubber (EPR)-clay nanocomposites based on maleic anhydride-modified EPR and organophilic clay. Journal of Applied Polymer Science 2004, 93(2):758-764.
61. Burnside S.D., Giannelis E.P. Nanostructure and properties of polysiloxanelayered silicate nanocomposites. Journal of Polymer Science, Part B: Polymer Physics 2000, 38(12):1595-1604.
62. Giannelis E.P., Burnside S.D. Synthesis and properties of new poly(dimethylsiloxane) nanocomposites. Chemisty of Materials 1995, 7(9):1597.