Development and characterisation of dense lanthanum-based perovskite oxygen-separation capillary membranes for high-temperature applications

Journal of Membrane Science

Volumn 468, Issue , 2014, Pages 250-258

  Middelkoop, Vesna ^a   Chen, Hong ^a   Michielsen, Bart ^a   Jacobs, Marijke ^a   Syvertsen Wiig, Guttorm ^b   Mertens, Myrjam ^a   Buekenhoudt, Anita ^a   Snijkers, Frans ^a  

^a FLEMISH INSTITUTE FOR TECHNOLOGICAL RESEARCH VITO   (Belgium)

^b Ceramic Powder Technology AS CerPoTech   (Norway)

Author keywords

Hollow fibre membranes; Lanthanum based perovskites; Mixed ionic and electronic conductors (MIECs); Oxygen separation

Indexed keywords

COBALT; LANTHANUM; MECHANICAL PROPERTIES; OXYGEN; PEROVSKITE; POWDERS; SINTERING; TEXTILE INDUSTRY;

CHEMICAL POTENTIAL DIFFERENCE; COMMERCIAL APPLICATIONS; HIGH TEMPERATURE CYCLING; HOLLOW-FIBRE MEMBRANE; MEMBRANE FABRICATION PROCESS; MIXED IONIC AND ELECTRONIC CONDUCTORS; OXYGEN SEPARATION; THERMAL AND MECHANICAL PROPERTIES;

MEMBRANES;

COBALT DERIVATIVE; LANTHANUM; OXYGEN DERIVATIVE; PEROVSKITE;

ARTICLE; CONTROLLED STUDY; HIGH TEMPERATURE; LIMIT OF DETECTION; MEMBRANE PERMEABILITY; MEMBRANE TECHNOLOGY; PARTICLE SIZE; PERFORMANCE; POWDER; PRIORITY JOURNAL; PROCESS DEVELOPMENT; SEPARATION TECHNIQUE;

EID: 84903741778     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2014.05.032     Document Type: Article

References (48)

1. Ramanarayanan T.A., Singhal S.C., Wachsman E.D. High temperature ion conducting ceramics. Interface 2001, 10:22.
2. Stephens W.T., Mazanec T.J., Anderson H.U. Influence of gas flow rate on oxygen flux measurements for dense oxygen conducting ceramic membranes. Solid State Ionics 2000, 129:271.
3. Orlovskaya N., Browning N. Mixed Ionic Electronic Conducting Perovskites For Advanced Energy Systems. NATO Science Series II: Mathematics, Physics and Chemistry 2004, Springer-Verlag, New York Inc.
4. Ito W., Nagai T., Sakon T. Oxygen separation from compressed air using a mixed conducting perovskite-type oxide membrane. Solid State Ionics 2007, 178:809.
5. Wang H., Tablet C., Caro J. Oxygen production at low temperature using dense perovskite hollow fiber membranes. J. Membr. Sci. 2008, 322:214.
6. Bhatia S., Thien C.Y., Mohamed A.R. Oxidative coupling of methane (OCM) in a catalytic membrane reactor and comparison of its performance with other catalytic reactors. Chem. Eng. J. 2009, 148:525.
7. Thursfield A., Metcalfe I.S. The use of dense mixed ionic and electronic conducting membranes for chemical production. J. Mater. Chem. 2004, 14:2475.
8. Dong X., Jin W., Xu N., Li K. Dense ceramic catalytic membranes and membrane reactors for energy and environmental applications. Chem. Commun. 2011, 47:10886.
9. 2 capture. Curr. Opin. Chem. Eng. 2012, 1:163.
10. Wei Y., Yang W., Caro J., Wang H. Dense ceramic oxygen permeable membranes and catalytic membrane reactors. Chem. Eng. J. 2013, 220:185.
11. 3-δ a hollow fibre membranes with high oxygen permeation fluxes. Ceram. Int. 2013, 39:431.
12. 3-δ (BSCF) hollow fibers using silver surface modification. J. Membr. Sci. 2009, 340:148.
13. 3-δ perovskite membranes for air separation. Ceram. Int. 2009, 35:2455.
14. Van Noyen J., Middelkoop V., Buysse C., Kovalevsky A., Snijkers F., Buekenhoudt A., Mullens S., Luyten J., Kretzschmar J., Lenaerts S. Fabrication of perovskite capillary membranes for high temperature gas separation. Catal. Today 2012, 193:172.
15. Wang H., Schiestel T., Tablet C., Scroeder M., Caro J. Mixed oxygen ion and electron hollow fiber membranes for oxygen separation. Solid State Ionics 2006, 177:2255.
16. Martin M. Materials in thermodynamic potential gradients. J. Chem. Thermodyn. 2003, 35:1291.
17. 3-δ materials for oxygen transport membranes. J. Solid State Electrochem. 2006, 10:581.
18. Vente J.F., Haije Wim G., Rak Z.S. Performance of functional perovskite membranes for oxygen production. J. Membr. Sci. 2006, 276:178.
19. 3-δ. Solid State Ionics 2008, 178:1787.
20. 3-δ oxygen separation membranes - effects of kinetic demixing/decomposition and impurity segregation. J. Membr. Sci. 2009, 344:101.
21. 3-δ-membrane for oxygen separation. J. Membr. Sci. 2010, 351:16.
22. 3-δ oxygen separation membranes. J. Membr. Sci. 2011, 369:526.
23. Lein H.L., Wiik K., Grande T. Kinetic demixing and decomposition of oxygen permeable membranes. Solid State Ionics 2006, 177:1587.
24. 3-delta hollow fiber by microstructure modification and Ag/Pt catalyst deposition. Energy Fuels 2012, 26:4728.
25. 3-δ perovskite hollow fiber membranes for oxygen permeation and methane conversion. Sep. Purif. Technol. 2012, 96:89.
26. Thursfield A., Murugan A., Franca R., Metcalfe I.S. Chemical looping and oxygen permeable ceramic membranes for hydrogen production - a review. Energy Environ. Sci. 2012, 5:7421.
27. Nalbandian A.Evdou, Zaspalis V. La1LxSrxMO3 (M=Mn, Fe) perovskites as materials for thermochemical hydrogen production in conventional and membrane reactors. Int. J. Hydrogen Energy 2009, 34:7162.
28. 3-δ membrane reactors for partial oxidation of methane. J. Solid State Electrochem. 2009, 13:391.
29. 3-δ, B=Al, Ga, Cr, Ti, Ta, Nb. Solid State Ionics 2012, 225:186.
30. Wang W., Gross M.D., Vohs J.M., Gorte R.J. The stability of LSF-YSZ electrodes prepared by infiltration. J. Electrochem. Soc. 2007, 154:439.
31. 3-δ perovskites for application in oxygen separation membranes. J. Electroceram. 2009, 22:55.
32. 3-x membranes. Solid State Ionics 2000, 135:637.
33. J. Luyten, A. Buekenhoudt, J. Cooymans, R. Leysen, Gas-Separating Dense Ceramic Membrane, Patent, EP 0900587, 1999.
34. Buysse C., Kovalevsky A., Snijkers F., Buekenhoudt A., Mullens S., Luyten J., Kretschmar J., Lenaerts S. Development, performance and stability of sulfur-free, macrovoid-free BSCF capillaries for high temperature oxygen separation from air. J. Membr. Sci. 2011, 372:239.
35. 3, Ni, SiC, stainless steel, and YSZ. J. Membr. Sci. 2012, 407:155.
36. Tan X., Liu Y., Li K. Mixed Conducting ceramic hollow-fiber membranes for air separation. AIChE J. 2005, 51:1991.
37. B. Michielsen, M. Jacobs, V. Middelkoop, F. Snijkers, Surface Modification of La0.6Sr0.4Co0.2Fe0.8O3-δ Hollow Fiber Membranes for Oxygen Separation ECERCS, Limonges, 2013.
38. Glossary of Materials Testing, Flexural Strength, Instron, Bucks HP12 3SY, United Kingdom. http://www.instron.co.uk/wa/glossary/Flexural-Strength.aspx.
39. Mujika F. On the difference between flexural moduli obtained by three-point and four-point bending tests. Polym. Test. 2006, 25:214.
40. 3-δ capillaries for high temperature gas separation. J. Membr. Sci. 2010, 359:86.
41. Tan X., Liu Y., Li K. Preparation of LSCF ceramic hollow-fiber membranes for oxygen production by a phase-inversion/sintering technique. Ind. Eng. Chem. Res. 2005, 44:61.
42. 3-δ perovskite hollow fiber membranes. Ind. Eng. Chem. Res. 2010, 49:2895.
43. H. Bingxin, Thermo-Mechanical Properties of Mixed Ion-Electron Conducting Membrane Materials (PhD thesis), Fakultät für Maschinenwesen der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2010, p. 25.
44. Thursfield A., Metcalfe I.S. Methane oxidation in a mixed ionic-electronic conducting ceramic hollow fibre reactor module. J. Solid State Electrochem. 2006, 10:604.
45. 3-δ oxygen nonstoichiometry and chemical diffusion constant. Solid State Ionics 2003, 156:453.
46. Hardy J.S., Templeton J.W., Edwards D.J., Lu Z., Stevenson J.W. Lattice expansion of LSCF-6428 cathodes measured by in situ XRD during SOFC operation. J. Power Sources 2012, 198:76.
47. Thursfield A., Metcalfe I.S. Air separation using a catalytically modified mixed conducting ceramic hollow fibre membrane module. J. Membr. Sci. 2007, 288:175-187.
48. 3-δ micro-tubular membranes. J. Membr. Sci. 2013, 442:1.