Application of rheology to fluid food handling and processing

Food Engineering Series

Volumn , Issue , 2007, Pages 427-469

  Rao, M Anandha ^a  

^a UNIVERSITY OF GENEVA   (Switzerland)

Author keywords

Apparent Viscosity; Dispersion Number; Flow Behavior Index; Residence Time Distribution; Shear Rate

Indexed keywords

EID: 84903703543     PISSN: 15710297     EISSN: None     Source Type: Book Series    
DOI: 10.1007/978-0-387-70930-7_8     Document Type: Chapter

References (77)

1. Anantheswaran, R. C. and Rao, M. A. 1985a. Heat transfer to model Newtonian liquid foods in cans during end-over-end agitation. J. Food Eng. 4: 1-19.
2. Anantheswaran, R. C. and Rao, M. A. 1985b. Heat transfer to non-Newtonian liquid foods in cans during end-over-end rotation. J. Food Eng. 4: 21-35.
3. Ball, C. O. 1923. Thermal process time for canned food. Bull. 37. National Research Council, Washington, DC.
4. Ball, C. O. 1927. Theory and practice in processing. The Canner 64: 27-32.
5. Ball, C. O. 1928. Mathematical solution of problems on thermal processing of canned food. Univ. ofCalif. (Berkeley) Publications in Public Health. 1(2): 15-245.
6. Ball, C. O. and Olson, F. C. W. 1957. Sterilization in Food Technology, 1st ed., McGraw Hill Book Co., New York.
7. Bird, R. B., Stewart, W. E. and Lightfoot, E. N.1960. TransportPhenomena, John Wiley & Sons, New York.
8. Brodkey, R. S. 1967. The Phenomena ofFluid Motions, Addison-Wesley, Reading, MA.
9. Charm, S. E. 197 Fundamentals ofFood Engineering, 2nd ed., AVI Publishing Co., Westport, CT.
10. Christiansen, E. B. and Craig, S. E. 1962. Heat transfer to pseudoplastic fluids in laminar flow. AIChE J. 8: 154-160.
11. Danckwerts, P. V. 1953. Continuous flow systems. Chem. Eng. Sci. 2: 1-13.
12. Dodge, D. W. and Metzner, A. B. 1959. Turbulent flow of non-Newtonian systems. AIChE J. 5: 189-204.
13. Dolan, K. D. and Steffe, F. 1990. Modeling rheological behavior of gelatinizing starch solutions using mixer viscometry data. J. Texture Stud. 21: 265-294.
14. Dolan, K. D., Steffe, J. F. and Morgan, R. G. 1989. Back extrusion and simulation ofviscosity development during starch gelatinization. J. Food Process Eng. 11: 79-101.
15. Feliciotti, E. and Esselen, W.B. 1957. Thermal destruction rates ofthiamine in pureed meats and vegetables. Food Techno!' 11:77-84.
16. Ferry, �D. 1980. Viscoelastic Properties ofPolymers, 3rd ed., John Wiley, New York.
17. Foust, A. S., Wenxel, L. A., Clump, C. W., Maus, L. and Andersen, B. 1980. Principles ofUnit Operations, 2nd ed., John Wiley, New York.
18. Garcia, E. �and Steffe, F. 1987. Comparison of friction factor equations for non-Newtonian fluids in pipe flow. J. Food Process Eng. 9: 93-120.
19. Graetz, L. 1883. Uber die Wanneleitungsfahigkeit von Flussigkeiten (On the heat transfer in liquids) Annalen der Physik und Chemie, part. 1, 18: 79-94.
20. Hanks, R. W. 1978. Low Reynolds number turbulent pipeline flow of pseudohomogeneous slurries, in Proceedings ofthe Fifth International Conference on the Hydraulic Transport ofSolids in Pipes Hydro-transport. May 8-1 Paper C2, p. C2-23 to C2-34, Hanover, West Germany, cited in Garcia and Steffe 1987.
21. Hanks, R. W. and Ricks, B. L. 1974. Laminar-turbulent transition in flow of pseudoplastic fluids with yield stress. J Hydronautics 8: 163-166.
22. Harper, I. C. and El-Sahrigi, A. F. 1965. Viscometric behavior of tomato concentrates. J Food Sci. 30: 470--476.
23. Heppell, N. J. 1985. Comparison of the residence time distributions of water and milk in an experimental UHT sterilizer. J Food Eng. 4: 71-84.
24. Himmelblau, D. M. and Bischoff, K. B. 1968. Process Analysis and Simulation, John Wiley and Sons, New York.
25. Kalkschmidt-J. 1977. Ruehr-und Mischeinrichtungen-unter besonderer Beruecksichtigung der Milch-wirtschaft. [Stirring and mixing equipment for the dairy industry.]. Fette,-Seifen,-AnstrichmitteI77(9): 357-359. Food Science Techno!. Abstract 76-04-P0664.
26. Kokini, I. L., Lai, L.-S., and Chedid, L. L. 1992. Effect of starch structure on starch rheological properties. Food Techno!. 46 (6) 124-139.
27. Kubota, K., Hosakawa, Y., Suzuki, K., and Hosaka, H. 1979. Studies on the gelatinization rate of rice and potato starches. J Food Sci. 44: 1394-1397.
28. Kumar, A. and Bhattacharya, M. 199 Numerical analysis of aseptic processing of a non-Newtonian liquid food in a tubular heat exchanger. Chem. Eng. Comm. 103: 27-51.
29. Kwant, P. B.~ Fierens, R. H. E., and Van Der Lee, A. 1973. Non-isothermal laminar pipe flow-I. Theoretical. Chem. Eng. Sci. 28: 1303-1316.
30. Ladeinde, F. 1988. Studies on thermal convection in self-gravitating and rotating horizontal cylinders in a vertical external gravity field. Ph.D. dissertation, Cornell University, Ithaca, New York.
31. Levenspiel, O. 1972. Chemical Reaction Engineering, 2nd ed. John Wiley and Sons, New York.
32. Liao, H.-I. 1998. Simulation of continuous sterilization of fluid food products: the role ofthermorheological behavior of starch dispersion and process. Ph.D. thesis, Cornell University, Ithaca, NY.
33. Liao, H.-I., Tattiyakul, I., and Rao, M. A. 1999. Superposition of complex viscosity curves during gelatinization of starch dispersion and dough. J. Food Process Eng. 22: 215-234.
34. Liao, H.-I., Rao, M. A., and Datta, A. K. 2000. Role of thennorheological behavior in simulation of continuous sterilization of a starch dispersion. IChemE Trans. Part C-Food and Bioproducts Process. 78(Cl): 48-56.
35. Lin, S. H. 1979. Residence time distribution in continuous sterilization process. Process Biochem. 14(7): 23-25.
36. Lopes da Silva, I. A., Goncalves, M. P., and Rao, M. A. 1994. Influence of temperature on dynamic and steady shear rheology of pectin dispersions. Carbohydr. Polym. 23: 77-87.
37. Lopez, A. 1987. A Complete Courses in Canning and Related Processes: Book II-Packaging-Aseptic Processing Ingredients, The Canning Trade Inc., Baltimore, Maryland.
38. Lyche, B. C. and Bird, R. B. 1956. The Graetz-Nusselt problem for a power-law non-Newtonian fluid. Chem. Eng. Sci. 6: 35--41.
39. Metzner, A. B. and Otto, R. E. 1957. Agitation of non-Newtonian fluids. AIChE J 3: 3-10.
40. Miller, E. I. 198 The design and operation of agitators for use in whole milk storage vessels. N.Z. J. Dairy Sci. Techno!. 16(3): 221-229. Food Sci. Techno!. Abstract 80-10-PI720.
41. Okechukwu, P. E. and Rao, M. A. 1995. Influence of granule size on viscosity of com starch suspension. J. Texture Stud. 26: 501-516.
42. Okechukwu, P. E. and Rao, M. A. 1996. Kinetics of cornstarch granule swelling in excess water, in Gums & Stabilisers for The Food Industry 8 (ed. G. O. Phillips, P.A. Williams, and D. J. Wedlock), pp. 49-57, The Oxford University Press, Oxford, U.K.
43. Osorio, F.A. and Steffe, J. F. 1984. Kinetic energy calculations for non-Newtonian fluids in circular tubes. J. Food Sci. 49: 1295-1296 and 1315.
44. Rao, M. A. 1992. Measurement of viscoelastic properties of fluid and semisolid foods, in Viscoelastic Properties ofFood, eds. M. A. Rao and J. F. Steffe, pp. 207-232, Elsevier Applied Science Publishers, London.
45. Rao, M. A. 1995. Rheological properties of fluid foods, Engineering Properties ofFoods, eds. M. A. Rao and S. S. H. Rizvi, 2nd ed, pp. 1-53, Marcel Dekker, Inc., New York.
46. Rao, M. A. and Loncin, M. 1974a. Residence time distribution and its role in continuous pasteurization Part I. Journal Lebensmittel Wissenschaft und Technologie, 7: 5-13.
47. Rao, M. A. and Loncin, M. 1974b. Residence time distribution and its role in continuous pasteurization Part II. Journal Lebensmittel Wissenschaft und Technologie, 7: 14-17.
48. Rao, M. A. and Cooley, H. J. 1984. Determination of effective shear rates of complex geometries. J. Texture Stud. 15: 327-335.
49. Rao, M. A. and Anantheswaran, R. C. 1988. Convective heat transfer to fluid foods in cans. Adv. Food Res. 32: 39-84.
50. Rao, M. A. and Cooley, H. J. 1992. Rheology of tomato pastes in steady and dynamic shear. J. Texture Stud. 23: 415--425.
51. Rao, M. A., Bourne, M. C. and Cooley, H. J. 198 Flow properties of tomato concentrates. J. Texture Stud. 12: 521-538.
52. Rao, M. A., Walter, R. H. and Cooley, H. J. 198 Effect of heat treatment on the flow properties of aqueous guar gum and sodium carboxymethylcellulose CMC solutions. J. Food Sci. 46: 896-899 and 902.
53. Rao, M. A., Cooley, H. J., Anantheswaran, R. C. and Ennis, R. W. 1985. Convective heat transfer to canned liquid foods in a Steritort. J. Food Sci. 50: 150-154.
54. Rieger, F. and Novak, V. 1973. Power consumption of agitators in highly viscous non-Newtonian liquids. Trans. IChem. E. 51: 105-111.
55. Roig, S. M., Vitali, A. A., Ortega Rodriguez, E. and Rao, M. A. 1976. Residence time distribution in the holding section of a plate heat exchanger. Journal Lebensmittel Wissenschaft und Technologie, 9: 255-256.
56. Sancho, M. F., and Rao, M. A. 1992. Residence time distribution in a holding tube. J. Food Eng. 15: 1-19.
57. Sestak, J., Zitny, R., and Houska, M. 1983. Simple rheological models of food liquids for process design and quality assessment. J. Food Eng. 2(1): 35--49.
58. Sieder, E. N., and Tate, G. E. 1936. Heat transfer and pressure drop of liquids in tubes. Ind. Eng. Chem. 28: 1429-1435.
59. Simpson, S. G. and Williams, M. C. 1974. An analysis of high temperature/short time sterilization during laminar flow. J. Food Sci. 39: 1047-1054.
60. Skelland, A. H. P. 1967. Non-Newtonian Flow and Heat Transfer, John Wiley, New York.
61. Steffe, J. F. 1996. Rheological Methods in Food Process Engineering, 2nd ed.. Freeman Press. East Lansing, MI, USA.
62. Steffe, J. F. and Morgan, R. G. 1986. Pipeline design and pump selection for non-Newtonian fluid foods. Food Techno/. 40(12): 78-85.
63. Steffe, J. F., Mohamed, I., and Ford, E. W. 1984. Pressure drop across valves and fittings for pseudoplastic fluids in laminar flow. Trans. Am. Soc. Agric. Engrs. 27: 616-619.
64. Stevens, P. M. 1972. Lethality calculations, including effects of product movement, for convection heating and broken heating foods in still-cook retorts. Ph.D. dissertation, Univ. ofMassachusetts, Amherst, MA.
65. Tattiyakul, J. 200 Heat transfer to a canned starch dispersion under agitation: Numerical simulation and experiment. Ph.D. Thesis, Cornell University, Ithaca, NY.
66. Tattiyakul, L. and Rao, M. A. 2000. Rheological behavior of cross-linked waxy maize starch dispersions during and after heating. Carbohydr. Polym. 43: 215-222.
67. Tattiyakul, L., Rao, M. A., and Datta, A. K. 2002a. Heat transfer to a canned com starch dispersion under intermittent agitation. �Food Eng. 54(4): 321-329.
68. Tattiyakul, L., Rao, M. A., and Datta, A. K. 2002b. Heat transfer to three canned fluids of different thermo-rheologicalbehavior under intermittentagitation. IChemE Trans. Part C-Food and Bioproducts Process 80: 20-27.
69. Veerkamp, C. H., Romijn, A. M., and Pol, C. 1974. Influence of varying residence time distribution on inactivation of microorganisms during pasteurization of egg products. Lebensm.-Wiss. u.-Techno/. 7: 306-310.
70. Vitali,A. A. and Rao, M. A. 1984a. Flow properties of low-pulpconcentratedorangejuice: serum viscosity and effect of pulp content. �Food Sci. 49: 876-881.
71. Vitali, A. A. and Rao, M. A. 1984b. Flow properties of low-pulp concentrated orange juice: effect of temperature and concentration. Food Sci. 49: 882-888.
72. Wilkens, R., Henry, C., and Gates, L. E. 2003. How to scale-up mixing processes in non-Newtonian fluids. Chem. Eng. Progress 99(5): 44-52.
73. Wissler, E. H. and Schechter, R. S. 1959. The Graetz-Nusselt problem with extension for a Bingham plastic. Chem. Eng. Prog. Symp. Ser. 29-34.
74. Yang, W. H. 1997. Rheological behavior and heat transfer to a canned starch dispersion: computer simulation and experiment. Ph.D. thesis, Cornell University, Ithaca, NY.
75. Yang, W. H. and Rao, M. A. 1998a. Complex viscosity-temperaturemaster curve of cornstarch dispersion during gelatinization. �Food Proc. Eng. 21: 191-207.
76. Yang, W. H. and Rao, M. A. 1998b. Transient natural convection heat transfer to starch dispersion in a cylindrical container: numerical solution and experiment �Food Eng. 36: 395-415.
77. Yang, W. H. and Rao, M. A. 1998c.Numerical study of parameters affectingbroken heating curve. J Food Eng. 36-37: 43-61.