4.06 - Modeling of fatigue crack growth: Mechanistic models

Comprehensive Structural Integrity

Volumn 4, Issue , 2007, Pages 165-189

  Tanaka, K ^a   Akiniwa, Y ^a  

^a NAGOYA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

FATIGUE OF MATERIALS;

MECHANISTIC MODELS;

FATIGUE CRACK PROPAGATION;

EID: 84903415999     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B0-08-043749-4/04032-5     Document Type: Chapter

References (97)

1. Akiniwa A., Tanaka K., Matsui E. Statistical characteristics of propagation of small fatigue cracks in smooth specimens of aluminum alloy 2024-T3. Mater. Sci. Eng. 1988, A104:105-115.
2. Akiniwa Y., Tanaka K. Prediction of fatigue limits of engineering components containing small cracks. Fatigue Crack Growth Thresholds Endurance Limits and Design ASTM STP 1372 2000, 304-318. ASTM. J.C. Newman, R.S. Pascik (Eds.).
3. Akiniwa Y., Tanaka K., Kimura H. Microstructural effects on crack closure and propagation threshold of small cracks. Fatigue Fract. Eng. Mater. Struct. 2001, 24:817-829.
4. Akiniwa Y., Tanaka K., Kimura H., Kikuchi K. Simulation of propagation behavior of microstructurally small fatigue cracks. J. Soc. Mater. Sci., Japan 2000, 49:1002-1009.
5. Akiniwa Y., Tanaka K., Taniguchi N. Propagation and closure of short fatigue cracks at notches under compressive mean stresses. Fatigue Fract. Eng. Mater. Struct. 1988, 11:343-354.
6. Akiniwa Y., Tanaka K., Zhang L. Prediction of notch fatigue threshold based on R-curve method. Trans. Japan Soc. Mech. Eng. 1996, 62:356-362.
7. Akiniwa Y., Zhang L.M., Tanaka K. Prediction of the fatigue limit of cracked specimens based on the cyclic R-curve method. Fatigue Fract. Eng. Mater. Struct. 1997, 20:1387-1398.
8. Bilby B.A., Cottrell A.H., Swinden K.H. The spread of plastic yield from a notch. Proc. Roy. Soc., London 1963, A272:304-314.
9. Billaudeau T., Nadat Y. Fatigue crack initiation for defect materials under multiaxial loading. Proc. 6th Inter. Conf. Biaxial/Multiaxial Fatigue Fract. 2001, vol. 2:771-778. European Structural Integrity Society. M. de Freitas (Ed.).
10. Budiansky B., Hutchinson J.W. Analysis of crack closure in fatigue crack growth. Trans. ASME, J. Appl. Mech. 1978, 45:267-276.
11. Budiansky B., Hutchinson J.W., Labropoulos J.C. Continuum theory of dilatant transformation toughening in ceramics. Int. J. Solids Struct. 1983, 19:337-355.
12. Chan K.S. A microstructure-based fatigue crack initiation model for structural alloys. Fatigue 2002, Proc. 8th Inter. Fatigue Cong. 2002, vol. 5:347-354. EMAS, West Midlands, UK. A.F. Blom (Ed.).
13. Chan K.S., Hack J.E., Leverant G.R. Fatigue crack growth in MAR-M200 single crystals. Metall. Trans. 1987, 18A:581-591.
14. Chang R., Morris W.L., Buck O. Fatigue crack nucleation at intermetallic particles in alloys-A dislocation pile-up model. Scr. Metall. 1979, 13:191-194.
15. Coffin L.F. A study of the effects of cyclic thermal stresses on a ductile metal. Trans. Am. Soc. Mech. Eng. 1954, 76:931-950.
16. Deshpande V.S., Needleman A., Van der Giessen E. A discrete dislocation analysis of near-threshold fatigue crack growth. Acta Mater. 2001, 49:3189-3203.
17. Deshpande V.S., Needleman A., Van der Giessen E. Discrete dislocation modeling of fatigue crack propagation. Acta Mater. 2002, 50:831-846.
18. Doquet V. Micromechanical simulations of microstructure-sensitive Stage I fatigue crack growth. Fatigue Fract. Eng. Mater. Struct. 1999, 22:215-223.
19. Dugdale D.S. Yielding of steel sheets containing slits. J. Mech. Phys. Solids 1960, 8:100-108.
20. Elber W. Fatigue crack closure under cyclic tension. Eng. Fract. Mech. 1970, 2:37-45.
21. Elber W. The significance of fatigue crack closure. Damage Tolerance in Aircraft Structures, ASTM STP 486 1971, 230-242.
22. Essmann U., Gosele U., Mughrabi H. A model of extrusions and intrusions in fatigued metals: I. Point-defect production and the growth of extrusions. Phil. Mag. 1981, 44:405-426.
23. Forsyth P.J.E. A two stage process of fatigue crack growth. Crack Propagation: Proceedings of Cranfield Symposium, Her Majesty's Stationary Office, London 1962, 76-94.
24. Furuya Y., Matsuoka S., Takagi S. High cycle fatigue properties of modified ausformed SCM440 steels. Trans. Japan Soc. Mech. Eng. 2002, 68:41-48.
25. Glinka G. A notch stress-strain analysis approach to fatigue crack growth. Eng. Fract. Mech. 1985, 21:245-261.
26. El Haddad M.H., Smith K.N., Topper T.H. Fatigue crack propagation of short cracks. Trans. ASME, J. Eng. Mater. Tech. 1979, 101:42-46.
27. El Haddad M.H., Topper T.H., Smith K.N. Prediction of non-propagating cracks. Eng. Fract. Mech. 1979, 11:573-584.
28. Hertzberg R.W. A simple calculation of d a/d NΔ K data in the near threshold regime and above. Int. J. Fract. 1993, 64:R53-R58.
29. A. Hunsche and P. Neumann, 1986, Quantitative measurement of persistent slip band profiles and crack initiation. Acta Met., 34, pp. 207-217.
30. Isibashi T. Prevention of Fracture and Fatigue 1967, Yoken-do, Tokyo, chap. 4, pp. 52-87.
31. Kikukawa M., Jono M., Adachi M. Direct observation and mechanism of fatigue crack propagation. Fatigue Mechanisms, ASTM STP 675 1979, 234-253. ASTM. J.T. Tong (Ed.).
32. Kimura H., Akiniwa Y., Tanaka K., Kondo J., Ishikawa T. Atomic force microscopic observation of initiation and early propagation of small fatigue cracks in ultrafine grained steel. J. Soc. Mater. Sci., Japan 2002, 51:801-807.
33. Kitagawa H., Takahashi S. Applicability of fracture mechanics to very small cracks or the cracks in the early stage. Proc. 2nd Inter. Conf. Mech. Behav. Mater., Boston 1976, 627-631. ASM, Cleveland, Ohio.
34. Laird C. The application of dislocation concepts in fatigue. Dislocations in Solids 1983, vol. 6:57-120. Amsterdam, North-Holland. F.R.N. Nabarro (Ed.).
35. Laird C., Krause A.R. A theory of crack nucleation in high strain fatigue. Int. J. Fract. Mech. 1968, 4:219-231.
36. Laird C., Smith G.C. Crack propagation in high stress fatigue. Phil. Mag. 1962, 8:847-857.
37. Lin T.H., Ito Y.M. Mechanics of fatigue crack nucleation mechanisms. J. Mech. Phys. Solids 1969, 17:511-523.
38. Lorca L. Roughness-induced fatigue crack closure: an numerical study. Fatigue Fract. Eng. Mater. Struct. 1992, 15:655-669.
39. Lukas P., Klesnil M. Fatigue limit of notched bodies. Mater. Sci. Eng. 1978, 34:61-66.
40. Ma B.-T., Laird C. Overview of fatigue behavior in copper single crystals: II Population, size distribution and growth kinetics of stage I cracks for tests at constant strain amplitude. Acta Metall. 1989, 37:337-348.
41. Majumdar S., Morrow J. Correlation between fatigue crack propagation and low cycle fatigue properties. Fracture Toughness and Slow-Stable Cracking, ASTM STP 559 1974, 159-182. ASTM.
42. S. S. Manson, 1954, Behavior of materials under conditions of thermal stress. NACA TN 2933.
43. May A.N. A model of metal fatigue. Nature 1960, 185:303-304.
44. May A.N. A model of metal fatigue. Nature 1960, 188:573-574.
45. McClintock F.A. On the plasticity of the growth of fatigue cracks. Fracture of Solids 1963, 65-102. Wiley. D.C. Drucker, J.J. Gilman (Eds.).
46. McClung R.C., Sehitoglu H. On the finite element analysis of fatigue crack closure: 1. Basic model in issues. Eng. Fract. Mech. 1989, 33:237-252.
47. McMeeking R.M., Evans A.G. Mechanics of transformation toughening in brittle materials. J. Am. Ceram. Soc. 1982, 65:242-245.
48. Miller K.J. Initiation and growth rates of short fatigue cracks. Fundamentals of Deformation and Fracture 1984, 477-500. Cambridge University Press, Cambridge. B.A. Bilby, K.J. Miller, J.R. Wills (Eds.).
49. Minakawa K., McEvily A.J. On crack closure in the near-threshold region. Scr. Met. 1981, 15:633-636.
50. Mughrabi H., Wang R., Differt K., Essmann U. Fatigue crack initiation by cyclic slip irreversibilities in high-cycle fatigue. Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage, ASTM STP 811 1983, 5-45.
51. Murakami Y. Analysis of stress intensity factors of mode I, II and III for inclined cracks of arbitrary shape. Eng. Fract. Mech. 1985, 22:101-114.
52. Murakami Y. Metal Fatigue: Effect of Small Defects and Nonmetallic Inclusions 1993, Yoken-do, Tokyo, p. 104 (2002, Elsevier, Oxford, p. 104).
53. Murakami Y., Endo M. Effect of hardness and crack geometries on δ Kth of small cracks emanating from small defects. The Behavior of Short Fatigue Cracks, ECG Pub. 1 1986, 275-293. Mechanical Engineering Publication, London. K.J. Miller, E.R. de los Rios (Eds.).
54. Nageswararao M., Gerold V. Fatigue crack propagation in stage I in an aluminum-zinc-magnesium alloy: general characteristics. Metall. Trans. 1976, 7A:1845-1855.
55. Nakai Y. Evaluation of fatigue damage and fatigue crack initiation process by means of atomic-force microscopy. Mater. Sci. Res. Int. 2001, 7:73-81.
56. Navarro A., de los Rios E.R. Short and long fatigue crack growth: A unified model. Phil. Mag. 1988, 57:15-36.
57. Neuber H. Theory of notch stress 1957, Berlin, Springer. 2nd edn.
58. Neumann P. Fatigue. Physical Metallurgy 1983, 1553-1594. Elsevier, BV. R.W. Chan, P. Haasen (Eds.).
59. Newman J.C. A crack closure model for predicting fatigue crack growth under aircraft spectrum loading. Methods and Models for Predicting Fatigue Crack Growth under Random Loading, ASTM STP 748 1981, 53-84. J.B. Chang, C.M. Hudson (Eds.).
60. Newman J.C. The merging of fatigue and fracture mechanics concepts: a historical perspective. Prog. Aerospace Sci. 1998, 34:347-390.
61. Okazaki M., Yamahira S., Kojima Y. Observation of first stage high-cycle fatigue crack growth behavior using directionally-solidified Al-Li alloy at high temperature. J. Mater. Sci., Japan 1990, 39:549-555.
62. Paris P.C., Erdogan F. A critical analysis crack propagation laws. Trans. ASME, J. Basic Eng. 1963, 85:528-534.
63. Parry M.R., Syngellakis S., Sinclair I. Numerical modeling of combined roughness and plasticity induced crack closure effects in fatigue. Mater. Sci. Eng. 2000, A291:224-234.
64. Pearson S. Initiation of fatigue cracks in commercial aluminum alloys and the subsequent propagation of very short cracks. Eng. Fract. Mech. 1975, 7:235-247.
65. Peterson R.E. Notch sensitivity. Metal Fatigue 1959, 293-306. McGraw-Hill, New York. G. Sines, J.L. Waisman (Eds.).
66. Pineau A.G., Pelloux R.M.N. Influence of strain-induced martensite transformations on fatigue crack growth rates in stainless steels. Metall. Trans. 1974, 5A:1103-1112.
67. Pippan R. Dislocation emission and fatigue crack growth threshold. Acta Metall. Mater. 1991, 39:255-262.
68. Repetto E.A., Ortiz M. A micromechanical model of cyclic deformation and fatigue-crack nucleation in f.c.c single crystals. Acta Mater. 1997, 45:2577-2595.
69. Ritchie R.O. Mechanisms of fatigue crack propagation in metals, ceramics and composites: role of crack tip shielding. Mater. Sci. Eng. 1988, A103:15-28.
70. Ritchie R.O., Suresh S., Moss C.M. Near-threshold fatigue crack growth in 2-1/4Cr-Mo pressure vessel steel in air and hydrogen. Trans. ASME, J. Eng. Mater. Tech. 1980, 102:293-299.
71. Speidel M.O. Fatigue fracture strength in high temperature. High Temperature Materials in Gas Turbines 1974, 207-255. Elsevier. P.R. Sahm, M.O. Speidel (Eds.).
72. Suresh S., Parks D.M., Ritchie R.O. Crack tip oxide formation and its influence on fatigue thresholds. Fatigue Thresholds 1982, vol. 1:391-408. Engineering Materials Advisory Services, Warley. A.F. Blom, J. Backlund, C.J. Beevers (Eds.).
73. Suresh S., Ritchie R.O. A geometric model for fatigue crack closure induced by fracture surface morphology. Metall. Trans. 1982, 13A:1627-1631.
74. Suresh S., Ritchie R.O. Propagation of short fatigue cracks. Int. Metals Rev. 1984, 19:445-476.
75. Suresh S., Zamiski G.F., Ritchie R.O. Oxide-induced crack closure: an explanation for near-threshold corrosion fatigue crack growth behavior. Metall. Trans. 1981, 12A:1435-1446.
76. Taira S., Tanaka K., Nakai Y. A model of crack-tip slip band blocked by grain boundary. Mech. Res. Comm. 1978, 5:375-381.
77. Tanaka K. Engineering formulae for fatigue strength reduction due to crack-like notches. Int. J. Fract. 1983, 22:R39-R45.
78. Tanaka K. Mechanisms and mechanics of short fatigue crack propagation. JSME Int. J. A 1987, 35:1-13.
79. Tanaka K. Mechanics and micromechanics of fatigue crack propagation. Fracture Mechanics: Perspective and Directions, ASTM STP 1020 1989, 151-183. ASTM, Philadelphia. R.P. Wei, R.P. Gangloff (Eds.).
80. Tanaka K., Akiniwa Y. Resistance-curve method for predicting propagation threshold of short fatigue cracks at notches. Eng. Fract. Mech. 1988, 30:863-876.
81. K. Tanaka and Y. Akiniwa, 1999, Fatigue limit of materials with small defects. In: "Engineering Against Fatigue," eds. J. H. Beynon, M. W. Brown, R. A. Smith, T. C. Lindley and B. Tomkins, A. A. Balkema, Rotterdam, pp. 309-310.
82. Tanaka K., Akiniwa Y., Nakai Y., Wei R.P. Modelling of small fatigue crack growth interacting with grain boundary. Eng. Fract. Mech. 1986, 24:803-819.
83. Tanaka K., Hoshide T., Sakai N. Mechanics of fatigue crack propagation by crack-tip plastic blunting. Eng. Fract. Mech. 1984, 19:805-825.
84. Tanaka K., Kinefuchi M., Yokomaku T. Modelling of statistical characteristics of the propagation of small fatigue cracks. Short Fatigue Cracks 1992, 351-368. ESIS 13, Mechanical Engineering Publication, London. K.J. Miller, E.R. de los Rios (Eds.).
85. Tanaka K., Mura T. A dislocation model for fatigue crack initiation. Trans. ASME, J. Appl. Mech. 1981, 103:97-103.
86. Tanaka K., Mura T. A theory of fatigue crack initiation at inclusions. Metall. Trans. 1982, 13A:117-123.
87. Tanaka K., Nakai Y. Propagation and nonpropagation of short fatigue crack at a sharp notch. Fatigue Eng. Mater. Struct. 1983, 6:315-327.
88. Tanaka K., Nakai Y. Mechanics of growth threshold of small fatigue cracks. Fatigue Crack Growth Threshold Concepts 1984, 497-516. Metallurgical Society of AIME, Warrendale, PA. D.L. Davidson, S. Suresh (Eds.).
89. Tanaka K., Nakai Y., Yamashita M. Fatigue growth threshold of small cracks. Int. J. Fract. 1981, 17:519-533.
90. Taylor D. A mechanistic approach to critical-distance methods in notch fatigue. Fatigue Fract. Eng. Mater. Struct. 2001, 24:215-224.
91. Tokaji K., Ogawa T., Harada Y., Ando Z. Limitations of linear elastic fracture mechanics in respect of small fatigue cracks and microstructure. Fatigue Fract. Eng. Mater. Struct. 1986, 9:1-14.
92. Tong J., Yates J.R., Brown M.W. A model for sliding crack closure: Part I. theory for pure mode II loading. Eng. Fract. Mech. 1995, 52:599-611.
93. Tschegg E.K. Mode III and mode I fatigue crack propagation behavior under torsional loading. J. Mater. Sci. 1983, 18:1604-1614.
94. Tzou J.-L., Suresh S., Ritchie R.O. Fatigue crack propagation in oil environments: 1. Crack growth behavior in silicone and paraffin oils. Acta Metall. 1985, 33:105-116.
95. Venkataraman G., Chung Y.W., Nakasone Y., Mura T. Free energy formulation of fatigue crack initiation along persistent slip bands: calculation of S- N curves and crack depths. Acta Metall. Mater. 1990, 38:31-40.
96. Walker N., Beever C.J. A fatigue crack closure mechanisms in titanium. Fatigue Eng. Mater. Struct. 1979, 1:135-148.
97. Wilkinson A.J., Roberts S.G., Hirsch P.B. Modelling the threshold conditions for propagation of stage I fatigue cracks. Acta Mater. 1998, 46:379-390.