Study of the heavy metals residual in the incineration slag of textile dyeing sludge

Journal of the Taiwan Institute of Chemical Engineers

Volumn 45, Issue 4, 2014, Pages 1814-1820

  Lin, Meiqing ^a   Ning, Xun an ^a   Liang, Xin ^a   Wei, Peitao ^a   Wang, Yujie ^a   Liu, Jingyong ^a  

^a GUANGDONG UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Heavy metal; Incineration; Slag; Textile dyeing sludge

Indexed keywords

DYEING; HEAVY METALS; INCINERATION; LEAD; NICKEL; SOLIDIFICATION; TEXTILES; ZINC;

CAO ADDITIVES; LOWER TEMPERATURES; NEGATIVE CORRELATION; RESIDENCE TIME; RESIDUAL RATIOS; TEXTILE DYEING SLUDGES; XRD ANALYSIS;

SLAGS;

EID: 84903398075     PISSN: 18761070     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jtice.2014.02.008     Document Type: Article

References (37)

1. Huang M.H., Chen L., Chen D.H., Zhou S.J. Characteristic and aluminum reuse of textile sludge incineration residues after acidification. J Environ Sci-China 2011, 23:1999-2004.
2. Patel H., Pandey S. Evaluation of physical stability and leachability of Portland Pozzolona Cement (PPC) solidified chemical sludge generated from textile wastewater treatment plants. J Hazard Mater 2012, 207-208:56-64.
3. Weisburger J.H. Comments on the history and importance of aromatic and heterocyclic amines in public health. Mutat Res-Fund Mol M 2002, 506-507:9-20.
4. Wiszniowski J., Robert D., Surmacz-Gorska J., Miksch K., Weber J.V. Landfill leachate treatment methods: a review. Environ Chem Lett 2006, 4:51-61.
5. Werther J., Ogada T. Sewage sludge combustion. Prog Energ Combust Sci 1999, 25:55-116.
6. Cusidó J.A., Soriano C. Valorization of pellets from municipal WWTP sludge in lightweight clay ceramics. Waste Manag 2011, 31:1372-1380.
7. Weng C.H., Lin D.F., Chiang P.C. Utilization of sludge as brick materials. Adv Environ Res 2003, 7:679-685.
8. Monzó J., Payá J., Borrachero M.V., Córcoles A. Use of sewage sludge ash (SSA) - cement admixtures in mortars. Cem Concr Res 1996, 26:1389-1398.
9. Linak W.P., Wendt J.O.L. Toxic metal emissions from incineration: mechanisms and control. Prog Energ Combust Sci 1993, 19:145-185.
10. Carlsson K. Heavy metals from energy from waste plants comparison of gas cleaning systems. Waste Manag Res 1986, 4:15-20.
11. Carroll GJ, Thurnau RC, Mournighan RE, Waterland LR, Lee JW, Fournier DJ. The partitioning of metals in rotary kiln incineration. EPA-600/D-89/208; 1989.
12. Fernández M.A., Martínez L., Segarra M., Garcia J.C., Ferran E. Behavior of heavy metals in the combustion gases of urban waste incinerators. Environ Sci Technol 1992, 26:1040-1047.
13. Jung C.H., Matsuto T., Tanaka N., Okada T. Metal distribution in incineration residues of municipal solid waste (MSW) in Japan. Waste Manag 2004, 24:381-391.
14. Zhang H., He P.J., Shao L.M. Fate of heavy metals during municipal solid waste incineration in Shanghai. J Hazard Mater 2008, 156:365-373.
15. Yoo J.I., Kim K.H., Jang H.N., Seo Y.C., Seok K.S., Hong J.H., et al. Emission characteristics of particulate matter and heavy metals from small incinerators and boilers. Atmos Environ 2002, 36:5057-5066.
16. Yao H., Mkilaha I.S.N., Naruse I. Screening of sorbents and capture of lead and cadmium compounds during sewage sludge combustion. Fuel 2004, 83:1001-1007.
17. Rio S., Verwilghen C., Ramaroson J., Nzihou A., Sharrock P. Heavy metal vaporization and abatement during thermal treatment of modified wastes. J Hazard Mater 2007, 148:521-528.
18. Li R.D. Mechanisms of melting process of municipal solid waste incineration fly ashes: micro-and lab-scale studies 2002, Zhejiang University.
19. Takaoka M., Takeda N., Miura S. The behavior of heavy metals and phosphorus in an ash melting process. Wat Sci Tech 1997, 36:275-282.
20. Chen Y. Study on the partitioning and speciation of Cd and Pb during municipal solid waste incineration 2008, Tsinghua University.
21. Ljung A., Nordin A. Theoretical feasibility for ecological biomass ash recirculation: chemical equilibrium behavior of nutrient elements and heavy metals during combustion. Environ Sci Technol 1997, 31:2499-2503.
22. Yi Z.J., Yan J.L., Ding C. Morphological analysis of copper and nickel in the incineration residue from electroplating sludge. Environ Eng 2012, 30:80-82. 126.
23. Corella J., Toledo J.M. Incineration of doped sludges in fluidized bed. Fate and partitioning of six targeted heavy metals. I. Pilot plant used and results. J Hazard Mater 2000, 80:81-105.
24. Hoffmann G., Schirmer M., Bilitewski B., Savos M.K. Thermal treatment of hazardous waste for heavy metal recovery. J Hazard Mater 2007, 145:351-357.
25. Chen T., Yan B. Fixation and partitioning of heavy metals in slag after incineration of sewage sludge. Waste Manag 2012, 32:957-964.
26. Durlak S.K., Biswas P., Shi J.C. Equilibrium analysis of the affect of temperature, moisture and sodium content on heavy metal emissions from municipal solid waste incinerators. J Hazard Mater 1997, 56:1-20.
27. Bakoglu M., Karademir A., Ayberk S. Partitioning characteristics of targeted heavy metals in IZAYDAS hazardous waste incinerator. J Hazard Mater 2003, 99:89-105.
28. Jacob A., Stucki S., Struis W.J. Complete heavy metal removal from fly ash by heat treatment: Influence of chlorides on evaporation rates. Environ Sci Technol 1996, 30:3275-3283.
29. 2. Waste Manag 1997, 17:231-236.
30. Marani D., Braguglia C.M., Mininni G., Maccioni F. Behaviour of Cd, Cr, Mn, Ni, Pb, and Zn in sewage sludge incineration by fluidised bed furnace. Waste Manag 2003, 23:117-124.
31. Meng A.H., Li Q.H., Jia J.Y., Zhang Y.G. Effect of moisture on partitioning of heavy metals in incineration of municipal solid waste. Chin J Chem Eng 2012, 20:1008-1015.
32. Li R.D., Liu L.F., Li A.M. The influence of additives upon heavy metals migration behavior in the fluidized bed incineration process of sludge. Thermal Power Generation 2004, 10:11-14. 54.
33. Xia F.Y., Zhao Y.C., Tang P. Incineration mechanisms of tannery sludge andcontrol of heavy metal vaporization during the incineration process. Acta Sci Circumst 2011, 31:1270-1276.
34. Lin C.L., Wey M.Y. The effect of mineral compositions of waste and operating conditions on particle agglomeration/defluidization during incineration. Fuel 2004, 83:2335-2343.
35. Yonemochi E., Hoshino T., Yoshihashi Y., Terada K. Evaluation of the physical stability and local crystallization of amorphous terfenadine using XRD-DSC and micro-TA. Thermochim Acta 2005, 432:70-75.
36. 2 using DSC/TG and XRD analysis. Mater Chem Phys 2005, 90:344-352.
37. Xiao X.C., Jiang W.H., Song L.X., Tian J.F., Hu X.F. Thermoanalysis and XRD study of crystallization behaviors of amorphous carbon nitride. Diam Relat Mater 2000, 9:1783-1785.