Oxygen consumption upon electrochemically polarised zinc

Journal of Applied Electrochemistry

Volumn 44, Issue 6, 2014, Pages 747-757

  Thomas, S ^a,b   Cole, I S ^b   Gonzalez Garcia, Y ^c,d   Chen, M ^b   Musameh, M ^b   Mol, J M C ^d   Terryn, H ^c,d   Birbilis, N ^a  

^a MONASH UNIVERSITY   (Australia)

^b CSIRO   (Australia)

^c VRIJE UNIVERSITEIT BRUSSEL   (Belgium)

^d DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Oxygen; Oxygen reduction reaction; Passivity; SECM; Zinc

Indexed keywords

CORROSION; ELECTROLYTIC REDUCTION; II-VI SEMICONDUCTORS; MICROELECTRODES; OXIDE MINERALS; OXYGEN; OXYGEN REDUCTION REACTION; ZINC OXIDE;

ELECTRODE KINETICS; METAL SURFACES; OXYGEN CONCENTRATIONS; OXYGEN CONSUMPTION; OXYGEN DIFFUSION; PASSIVITY; REDOX REDUCTION; SECM;

ZINC;

EID: 84903308141     PISSN: 0021891X     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10800-014-0684-0     Document Type: Article

References (41)

1. Oldham KB, Myland JC (1994) Fundamentals of electrochemical science. Academic Press Inc., San Diego
2. Boto KG, Williams LFG (1977) Rotating disc electrode studies of zinc corrosion. J Electroanal Chem Interfacial Chem 77:1-20
3. Wroblowa HS, Qaderi SB (1990) The mechanism of oxygen reduction on zinc. J Electroanal Chem Interfacial Electrochem 26:153-161
4. Zs Pilbath, Sziraki L (2008) The electrochemical reduction of oxygen on zinc corrosion films in alkaline solutions. Electrochim Acta 53:3218-3230
5. Yadav AP, Nishikata A, Tsuru T (2005) Oxygen reduction mechanism on corroded zinc. J Electroanal Chem 585:142-149
6. Dafydd H, Worsley DA, McMurray HN (2005) The kinetics and mechanism of cathodic oxygen reduction on zinc and zinc-aluminium alloy galvanised coatings. Corros Sci 47:3006-3018
7. Goux A, Pauporte T, Lincot D (2006) Oxygen reduction reaction on electrodeposited zinc oxide electrodes in KC1 solution at 70 °C. Electrochim Acta 51:3168-3172
8. Thomas S, Cole IS, Sridhar M, Birbilis N (2013) Revisiting zinc passivation in alkaline solutions. Electrochim Acta 97:192-201
9. Stratmann M, Streckel H (1990) On the atmospheric corrosion of metals which are covered with thin electrolyte layers. I. Verification of the experimental technique. Corros Sci 30:681-696
10. Stratmann M, Streckel H (1990) On the atmospheric corrosion of metals which are covered with thin electrolyte layers. II. Experimental results. Corros Sci 30:697-714
11. Venkatraman MS, Cole IS, Emmanuel B (2011) Corrosion under a porous layer: a porous electrode model and its implications for self-repair. Electrochim Acta 56:8192-8203
12. Macdonald DD, Ismail KM, Sikora EJ (1998) Characterization of the passive state on zinc. J Electrochem Soc 145:3141-3149
13. Macdonald DD (2011) The history of the point defect model for the passive state: a brief review of film growth aspects. Electrochim Acta 56:1761
14. Thomas S, Cole IS, Birbilis N (2012) Compact oxides formed on zinc during exposure to a single sea-water droplet. J Electrochem Soc 160:C59-C63
15. Dubuisson E, Lavie P, Dalard F, Caire J, Szunerits S (2006) Study of the atmospheric corrosion of galvanised steel in a micrometric electrolytic droplet. Electrochem Commun 8:911-915
16. Nishikata A, Ichihara V, Hayashi V, Tsuru T (1997) Influence of electrolyte layer thickness and pH on the initial stage of the atmospheric corrosion of iron. J Electrochem Soc 144:1244-1251
17. Cheng YL, Zhang Z, Cao FH, Li JF, Zhang JQ, Wang JM, Cao CN (2004) A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers. Corros Sci 46:1649-1667
18. Flitt HJ, Schweinsberg DP (2010) Synthesis, matching and deconstruction of polarization curves for the active corrosion of zinc in aerated near-neutral NaCl solutions. Corros Sci 52:1905-1914
19. Venkatraman MS, Cole IS, Emmanuel B (2011) Model for corrosion of metals covered with thin electrolyte layers: pseudo-steady state diffusion of oxygen. Electrochim Acta 56:7171-7179
20. Cole IS, Muster TH, Lau D, Wright N, Azmat NS (2010) Products formed during the interaction of seawater droplets with zinc surfaces. II. Results from short exposures. J Electrochem Soc 157:C213-C222
21. Cole IS, Muster TH, Furman SA, Wright N, Bradbury A (2008) Products formed during the interaction of seawater droplets with zinc surfaces. I. Results from 1- and 2.5-day exposures. J Electrochem Soc 155:C244-C255
22. Thomas S, Birbilis N, Venkatraman MS, Cole IS (2013) Self-Repairing oxides to protect zinc: review, discussion and prospects. Corros Sci 69:11-22
23. Lasia A (1999) Electrochemical impedance spectroscopy and its applications. Modern aspects of electrochemistry, Kluwer Academic/Plenum, New York, vol. 32:143-248
24. Pourbaix M (1974) Atlas of electrochemical equilibria in aqueous solutions, 2nd edn. National Association of Corrosion Engineers, Houston
25. Wagner C, Traud W (2006) On the interpretation of corrosion processes through the superposition of electrochemical partial processes and on the potential of mixed electrodes. Corrosion 62:844-856
26. Andersen TN, Ghandehari MH, Eyring H (1975) A limitation to the mixed potential concept: copper in oxygenated sulfuric acid solutions. J Electrochem Soc 122:1580-1585
27. +. Adv Eng Mater 9:292-297
28. Frankel GS (1990) Growth of 2D pits in thin film aluminium. Corros Sci 30:1203-1218
29. Kirkland NT, Williams G, Birbilis N (2012) Observations of the galvanostatic dissolution of pure magnesium. Corros Sci 65:5-9
30. Frankel GS, Samaniego A, Birbilis N (2003) Evolution of hydrogen at dissolving magnesium surfaces. Corros Sci 70:104-111
31. Fernandez JL, Bard AJ (2003) Scanning electrochemical microscopy. 47. Imaging electrocatalytic activity for oxygen Reduction in an acidic medium by the tip generation-substrate collection mode. Anal Chem 75:2967-2974
32. 2 formation by means of SECM for the characterisation of fuel cell catalyst activity. Electrochim Acta 53:1164-1169
33. Nagaiah TC, Maljusch A, Chen X, Bron M, Schuhmann W (2009) Visualization of the local catalytic activity of electrodeposited Pt-Ag Catalysts for oxygen reduction by means of SECM. ChemPhysChem 10:2711-2718
34. Simoes AM, Bastos AC, Ferreira MG, Gonzalez-Garcia Y, Gonzalez S, Souto RM (2007) Use of SVET and SECM to study the galvanic corrosion of an iron-zinc cell. Corros Sci 49:726-739
35. Gonzalez-Garcia Y, Mol JMC, Muselle T, De Graeve I, Van Assche G, Scheltjens G, Van Mele B, Terryn H (2011) SECM study of defect repair in self-healing polymer coatings on metals. Electrochem Commun 13:169-173
36. Bastos AC, Simoes AM, Gonzalez S, Gonzalez-Garcia Y, Souto RM (2005) Application of the scanning electrochemical microscope to the examination of organic coatings on metallic substrates. Prog Org Coat 53:177-182
37. Gilbert JL, Zarka L, Chang E, Thomas CH (1998) The reduction half cell in biomaterials corrosion: oxygen diffusion profiles near and cell response to polarized titanium surfaces. J Biomed Mater Res 42:321-330
38. Thomas S, Birbilis N, Venkatraman MS, Cole IS (2012) Corrosion of zinc as a function of pH. Corrosion 68:015009
39. Muster TH, Ganther WD, Cole IS (2007) The influence of microstructure on surface phenomena: rolled zinc. Corros Sci 49:2037-2058
40. Snook GA, Duffy NW, Pandolfo AG (2008) Detection of oxygen evolution from nickel hydroxide electrodes using scanning electrochemical microscopy. J Electrochem Soc 155:A262-A267
41. Mokaddem M, Volovitch P, Ogle K (2010) The anodic dissolution of zinc and zinc alloys in alkaline solution. I. Oxide formation on electrogalvanised steel. Electrochim Acta 55:7867-7875