Mechanical, thermal, and ultraviolet resistance properties of poly(ether-ester)/cerium oxide (CeO2) composite fibers

Journal of Reinforced Plastics and Composites

Volumn 33, Issue 13, 2014, Pages 1207-1215

  Huang, Xia ^a   Lin, Shaojian ^a   Shang, Jiaojiao ^a   He, Wen ^a   Lan, Jianwu ^a  

^a SICHUAN UNIVERSITY   (China)

Author keywords

composite fibers; Poly(ether ester); thermal property; ultraviolet resistance

Indexed keywords

ELASTICITY; ESTERIFICATION; ESTERS; NANOPARTICLES; OXIDES; SCANNING ELECTRON MICROSCOPY; TEMPERATURE; TENSILE STRENGTH; THERMODYNAMIC PROPERTIES; THERMOGRAVIMETRIC ANALYSIS;

COMPOSITE FIBERS; DIMETHYL TEREPHTHALATE; FOURIER TRANSFORM INFRA REDS; POLY(ETHER-ESTER); POLYTETRAMETHYLENE GLYCOLS; THERMAL GRAVIMETRIC ANALYSIS; ULTRAVIOLET RESISTANCES;

ETHERS;

EID: 84902986019     PISSN: 07316844     EISSN: 15307964     Source Type: Journal    
DOI: 10.1177/0731684413518826     Document Type: Article

References (41)

1. Lee TY, Lee CH, Cho SH, et al. Enhancement of physical properties of thermoplastic polyether-ester elastomer by reactive extrusion with chain extender. Polym Bull. 2011 ; 66: 979-990
2. Biemond GJE, Gaymans RJ. Elastic properties of thermoplastic elastomers based on poly(tetramethylene oxide) and monodisperse amide segments. J Mater Sci. 2010 ; 45: 158-167
3. Bumchan M, Ho KS, Hyun N, et al. An NMR study on sequence distributions of block copolymers of poly(butylene terephthalate) and poly(tetramethylene glycol). Polym Bull. 1999 ; 42: 587-594
4. Gabrielse W, Soliman M, Dijkstra K. Microstructure and phase behavior of block copoly(ether ester) thermoplastic elastomers. Macromolecules. 2011 ; 34: 1685-1693
5. Datta J, Balas A. DSC and thermal stability investigation of novel poly(ester-ether) glycols and poly(ester-ether)urethanes. J Therm Anal Cal. 2003 ; 74: 615-621
6. Kalfoglou NK. Thermomechanical studies of semicrystalline polyether-ester copolymers. Effect of thermal, mechanical, and solvent treatment. J Polym Sci. 1977 ; 21: 543-554
7. Kricheldorf HR, Wollheim T, Koning CE, et al. Thermoplastic elastomer 1. Poly(ether-ester-imide)s based on 1,4-diaminobutane, trimellitic anhydride, 1,4-dihydroxybutane and poly(tetramethylene oxide) diols. Polymer. 2001 ; 42: 6699-6708
8. Kricheldorf HR, Wollheim T, Altstadt V, et al. Thermoplastic elastomers. II. Poly(ether-ester-imide)s based on 1, 4-diaminobutane, trimellitic anhydride, 1, 4-dihydroxybutane, and poly(ethylene oxide)s. J Macromol Sci Pure Appl Chem. 2001 ; 38: 451-466
9. Chen CF, Liu F, Wu MY. Study on the elastic recovery of polyester-polyether elastomeric fiber at low temperature. Acta Polym Sin. 1981 ; 4: 252-256
10. Lin SJ, Lan JW, Guo RH, et al. Preparation, mechanical properties and thermal degradation kinetics of a novel poly(ester-ether-imide) elastomer based on N′, N-bis(2-hydroxyethyl)-pyromellitimide unite. J Macromol Sci Pure Appl Chem. 2013 ; 50: 426-434
11. Lin SJ, Guo RH, Lan JW, et al. Synthesis and properties of novel thermoplastic poly(ester-ether-imide) elastomers derived from 4,4′-bis(N-trimellitimide)-diphenylether unit with excellent thermal stability. J Macromol Sci Pure Appl Chem. 2012 ; 49: 1052-1060
12. Lin SJ, He W, Lan JW, et al. Synthesis and characterization of new thermoplastic poly(ester-ether-imide) elastomers derived from N′,N-bis(2-hydroxyethyl)-pyromellitimide unit with excellent thermal stability and good fiber-forming property. J Macromol Sci Pure Appl Chem. 2013 ; 50: 416-425
13. Ahn TH, Park YH, Kim SH, et al. Preparation and characterization of poly(ether ester) thermoplastic elastomers containing the 2,6- naphthalenedicarboxyl group. J Appl Polym Sci. 2003 ; 90: 3473-3480
14. Guo CQ, Zheng Z, Zhu QR, et al. Preparation and characterization of polyurethane/ZnO nanoparticle composites. Polym Plast Technol Eng. 2007 ; 46: 1161-1166
15. Lu N, Lu XD, Jin X, et al. Preparation and characterization of UV-curable ZnO/polymer nanocomposite films. Polym Int. 2007 ; 56: 138-143
16. Kim BH, Jung JH, Hong SH, et al. Nanocomposite of polyaniline and Na+-montmorillonite clay. Macromolecules. 2002 ; 35: 1419-1423
17. Li CC, Zhang D, Li ZY. Synthesis and properties of poly(ester ether) multiblock copolymers/organomontmorillonite hybrid nanocomposite. J Appl Polym Sci. 2002 ; 84: 1716-1720
18. Zhou RJ, Burkhart T. Thermal and mechanical properties of poly(ether ester)-based thermoplastic elastomer composites filled with TiO2 nanoparticles. J Mater Sci. 2011 ; 46: 2281-2287
19. Celebi H, Bayram G, Dogan A. Effect of ZnO type and concentration on the morphology, thermal, and mechanical properties of poly(ether ester)/ZnO composites. J Appl Polym Sci. 2013 ; 129: 3417-3424
20. Yin LX, Wang YQ, Pang GS, et al. Sonochemical synthesis of cerium oxide nanoparticles - effect of additives and quantum size effect. J Colloid Interface Sci. 2002 ; 246: 78-84
21. Tang CC, Bando Y, Liu BD, et al. Cerium oxide nanotubes prepared from cerium hydroxide nanotubes. Adv Mater. 2005 ; 17: 3005-3009
22. Masui T, Fujiwara K, Machida K, et al. Characterization of cerium(IV) oxide ultrafine particles prepared using reversed micelles. Chem Mater. 1997 ; 9: 2197-2204
23. Sivudu KS, Sgailaja D. Preparation and characterization of ceria nanoparticles supported on poly(4-vinyl pyridine-co-divinyl benzene). J Appl Polym Sci. 2006 ; 100: 3439-3445
24. Rangari VK, Srivastava DN, Gedanken A. Preparation of ceria nanoparticles embedded in PMMA using sonochemical technique. Mater Lett. 2006 ; 60: 3766-3768
25. 2) nanocomposite via in situ polymerization. J Mater Sci. 2012 ; 47: 7148-7156
26. Oprea S. Novel quinoline-based polyurethane elastomers. The effect of the hard segment structure in properties enhancement. J Polym Res. 2012 ; 19: 9767-9775
27. Moczo J, Pukanszky B. Polymer micro and nanocomposites: Structure, interaction, properties. J Ind Eng Chem. 2008 ; 14: 535-563
28. Wang XL, Wu LH, Li J. Influence of nanozirconia on the thermal stability of poly(methyl methacrylate) prepared by in situ bulk polymerization. J Appl Polym Sci. 2010 ; 117: 163-170
29. Yuan XH, L XH, Zhu EB, et al. Synthesis and properties of silicone/montmorillonite nanocomposites by in-situ intercalative polymerization. Carbohyd Polym. 2010 ; 79: 373-379
30. Ghosh PK, Pathak A, Goyat MS, et al. Influence of nanoparticle weight fraction on morphology and thermal properties of epoxy/TiO2. J Reinf Plast Compos. 2012 ; 31: 1180-1188
31. Huang L, Zhan R, Lu Y. Mechanical properties and crystallization behavior of polypropylene/nano-SiO2 composites. J Reinf Plast Compos. 2006 ; 25: 1001-1012
32. Zaman HU, Hun PD, Khan RA, et al. Morphology, mechanical, and crystallization behaviors of micro- and nano-ZnO filled polypropylene composites. J Reinf Plast Compos. 2012 ; 31: 323-329
33. 2-loading polyethylene glycol blend. J Eur Ceram Soc. 2005 ; 25: 3097-3107
34. Mallakpour S, Dinari M. Enhancement in thermal properties of poly(vinyl alcohol) nanocomposites reinforces with Al2O3 nanoparticles. J Reinf Plast Compos. 2013 ; 32: 217-224
35. Jia Z, Chen S, Zhang J. RTV silicone rubber filled with surface modified montmorillonite. J Macromol Sci Phys. 2012 ; 51: 2449-2461
36. Wacharawichanant S, Thongyai S, Phutthaphan A, et al. Effect of particle sizes of zinc oxide on mechanical, thermal and morphological properties of polyoxymethylene/zinc oxide nanocomposites. Polym Test. 2008 ; 27: 971-976
37. Zabihi O, Omrani A, Rostami AA. Thermo-oxidative degradation kinetics and mechanism of the system epoxy nanocomposite reinforced with nano-Al2O3. J Therm Anal Cal. 2012 ; 108: 1251-1260
38. Ma CCM, Chen YJ, Kuan HC. Polystyrene nanocomposite materials - preparation, mechanical, electrical and thermal properties, and morphology. J Appl Polym Sci. 2006 ; 100: 508-515
39. Majdzadeh-Ardakani K, Lofgren EA and Jabarin SA. The effect of particle size distribution on the dispersion of nanoclays in poly(ethylene terephthalate)/clay nanocomposites. J Reinf Plast Compos 2013. DOI: 10.1177/0731684413512229.
40. Su ZT, Liu J, Peng YF, et al. Effects of metal oxides on thermal stability of silicone rubber. Silicone Mater. 2000 ; 5: 4-7
41. Song XF, Li G. Modified properties research of poly(ether ester) elastic fibers. Synth Technol Appl. 2007 ; 4: 8-11