The development of creep-resistant steels

Creep-Resistant Steels

Volumn , Issue , 2008, Pages 15-77

  Mayer, K H ^a   Masuyama, F ^b  

^a Kyushu Institute of Technology ^*

^b KYUSHU INSTITUTE OF TECHNOLOGY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CREEP RESISTANT STEELS;

EID: 84902630057     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9781845694012.1.15     Document Type: Chapter

References (118)

1. Schult H. Grundlage der zukünftigen Entwicklung der Stromwirtschaft. Kohle in der Elekrizitätswirtschaft Essen 1952, 6-11.
2. Scarlin B. personal communication 2006, Alstom, Switzerland.
3. Kallen H. Der Werkstoff Stahl in der technischen Entwicklung der letzten 100Jahre. Stahl und Eisen 1960, 80:1864-1877.
4. Ruttmann W. Untersuchungen an Schraubenbolzen. Mitt. VGB 1937, (65):395-396.
5. Schmitz H. Vereinheitlichung des Dauerstandversuches mit Stahl. Stahl und Eisen 1935, 1523-1534.
6. ASTM Tentative Standards 1934, 1138-1156. ASTM, Philadelphia.
7. Siebel E. Neuzeitliche Werkstoffprüfung im Hochdruckkessel. Mitt. VGB 1938, (67):74-79.
8. Diehl H., Granacher J. Ergebnisse aus Zeitstandversuchen bei 500°C mit einer Beanspruchungsdauer bis über 300 000h. Arch. Eisenhüttenwesen 1979, 50(7):299-303.
9. Wellinger K. Beanspruchung und Werkstoffe. VGB-Werkstofftagung 1969, 9-17. Essen, Germany, Tagungsband.
10. Ewald J., Bendick W., Granacher J., Maile K., Melzer B., Mayer K.H., Rhode W., Tolksdorf E. 50 Years of joint german activities in the area of creep resistant materials 1999, 1-31. Düsseldorf, Germany, 25 November.
11. Thornton D.V. UK power industry collaboration high temperature materials testing programme 1999, 32-37. Düsseldorf, Germany, 25 November.
12. Masuyama F. Industry view of creep study activities in Japan 1999, 38-41. Düsseldorf, Germany, 25 November 1999, German Iron and Steel Institute, Düsseldorf.
13. Abe F., Irie H., Yagi K. Recent activities in NRIM creep data sheet project 1999, 42-46. Düsseldorf, Germany, 25 November.
14. Eberle F. Einige Ergebnisse amerikanischer Langzeit-Standversuche an Röhrenstählen, ihre Berücksichtigung bei der Festlegung zulässiger Spannungen, International Meeting about Long Term Creep Tests. Archiv für das Eisenhüttenwesen 1957, 28:702-706. 31.05./01.06.1957 Düsseldorf, Germany.
15. Curran R.M. The development of improved forgings for modern steam turbines 1984, 9-32. 28-30 November, ASTM Special Technical Publication 903, Code No. 04-903000-02, Williamsburg, VA, USA.
16. Melton K.N., et al. Zeitstanduntersuchungen an 21/4 Cr-1Mo-Stahlguss GS-18Cr Mo910. Material und Technik 1982, 190-197. Mitteilung der Schweizerischen Arbeitsgemeinschaft (BBC, Gebr. Sulzer, G. Fischer AG, Escher Wyss und von Roll) 1982/4, December.
17. Baumann K., Gramberg U. 260 000Stunden einer Löffler-Kesselanlage mit 130bar und 510°C. VGB Kraftwerkstechnik 1977, 57(10):699-706.
18. Fabritius H. Entwicklungsstand von warmfesten und korrosionsbeständigen Stählen für die Erdöl- und Erdgasindustrie. Mannesmannforschungsbericht 1973, 610.
19. Florin C. Ferritische warmfeste Stähle. Werkstoffkunde der gebräuchlichen Stähle 1977, 96-105. Teil 2, Verlag Stahleisen, Düsseldorf.
20. Orr J., Beckitt F.R., Met A., Fawkes G.D. The physical metallurgy of chromium-molybdenum steels for fast reactor boilers 1977, London.
21. Foldyna F., Purmensky J., Prnka T., Kadulova M. Einfluß des Molybdängehaltes auf die Zeitstandfestigkeit von Chrom-Molybdän-Vanadinstählen mit niedrigem Kohlenstoffgehalt. Arch. Eisenhüttenwesen 1971, 42:927-932.
22. Schüller H.J., Hagn L., Woitscheck A., Kober A., Christian H. Schweißnahtrisse in Formstücken an Heissdampfleitungen-Werkstoffuntersuchungen. VGB-Konferenz Werkstoffe und Schweißtechnik im Kraftwerk 1973, 163-194. VGB Essen, Germany.
23. Stahl-Eisen-Werkstoffblatt SEW 555 Steels for Large Forgings for Components in turbine and generator installations 2001, January, Verlag Stahleisen GmbH, Düsseldorf.
24. EN 10269:1999 Steels and Nickel Alloys for Fasteners with Specific Elevated and/or Low Temperature Properties 1999, Beuth Verlag GmbH, Berlin, Germany.
25. Norton F., Strang A. Improvement of creep and rupture properties of large 1%CrMoV steam turbine forgings. Journal Iron and Steel Institute 1969, 193-203. February.
26. Mayer K.H., Rieß W. The influences of the microstructure on the operational characteristics of steam turbine components subjected to high stresses. VGB Kraftwerkstechnik 1976, (3):138-142. March.
27. Smith R. 1959, PhD Thesis, cited in detail in Ref. 31, Sheffield University.
28. Thum A., Richard K. Ergebnisse von Langzeit-Dauerstandversuchen bei 500°C. Schweizer Archiv 1953, 19(8):235-245.
29. Schinn R, 'Die deutsche Entwicklung von Schmiedstücken für Wellen von Turbogeneratoren', VGB Technisch-wissenschaftlicher Bericht, Wärmekraftwerke VGB-TW503, VGB Essen Germany.
30. Conrad J.D., Mochel N.L. Operating experiences with high temperature steam turbine rotors and design improvements in rotor blade fastening. Transactions ASME 1958, 80(6):1210-1224. presented in Allentown,USA, 21-23 October 1957.
31. Cress T. Zum Zeitstandverhalten warmfester Chrom-Molybdän-Vandin Stähle und deren Neigung zu verformungslosen Zeitstandbrüchen 1967, Dissertation Techn. Hochschule Darmstadt, Germany.
32. Ruttmann W. Untersuchungen an Schraubenbolzen. Mitt. VGB 1937, (65):395-396.
33. VGB Guidelines for Bolts in the Range of High Temperatures. VGB-R 505M 1977, VGB Essen, Germany. 3rd edition.
34. Kramer L.D., Randolph D.D., Weisz D.A. Analysis of the Tennessee Valley Authority Gallatin Union No 2 Turbine Rotor Burst. Winter Meeting of ASME 1976, New York, December 5-10, ASME New York NY, USA 1976.
35. Toughness of CrMoV-Steels for Steam Turbine Rotors. EPRI Special Report RD-2357 1982, April.
36. Viswanathan R., Gehl S. Temper embrittlement of rotor steels. Robert I. Jaffee Memorial Symposium on Clean materials technology 1992, ASM/TMS Materials Week, 2-5 November 1992, Ohio 44073-0002, USA, ASM International, Materials Park, Chicago, Illinois, USA.
37. Masuyama F. Steam plant material development in Japan 1998, Liège, Belgium, September 1998, Forschungszentrum Jülich GmbH, Germany.
38. Husemann R.U. Werkstoffe und Werkstoffentwicklung für die Komponenten Membranwände und Überhitzerrohre für zukünftige Dampferzeuger 1995, 30-31 März Dresden, expert verlag Renningen-Malmsheim, Germany.
39. Fujita T., Takahashi N. The effects of boron on the long period creep rupture strength of the modified 12% chromium heat-resisting steel. Transactions ISIJ 1976, 16:606-613.
40. Fujita T. Twenty-first century electricity generation plants and materials 1999, 8 November, Japan, NIMS Tsukuba, Yokohama, Japan.
41. Boyle C.J., Newhouse D.L. United States Patent 3, 139, 337 1964, June.
42. Curran R.M. Progress in the development of large turbine rotor forgings 1970, 6-9 May Terni, Italy.
43. Brinkmann C.R., Gieseke B., Alexander J., Maziasz P.J. Modified 9Cr-1Mo Steel for Advanced Steam Generator Applications. ASME/IEEE Power Generation Conference 1991, 21-25 October, Boston, MA, USA, ASME/IEEE, ASME New York, NY, USA.
44. Mayer K.H., Bakker W.T. New ferritic steels increase the thermal efficiency of steam turbines. International Conference Joint Power Generation 1996, October, ASME New York, Houston, Texas, USA.
45. Thornton D.V., Mayer K.H. New materials for advanced steam turbines 1997, 4-6 November, Institute of Materials London, Newcastle upon Tyne, UK.
46. Hizume A., Takeda Y., Yokota H., Takano Y., Suzuki A., Kinoshita S., Koono M., Tsuchiyama T. The Probability of a new 12%Cr Rotor Steel applicable for Steam Temperature above 593°C. Journal of Engineering Materials and Technology/Transaction of ASME Chicago, USA 1987, 109:319-325.
47. Fujita T., Sato T., Takahashi N. Effect of Mo and W on long term creep strength of 12%Cr heat-resisting steel containing V, Nb and B. Transaction Iron and Steel Institute of Japan 1978, 18:115-124.
48. Berger C., Mayer K.H., Scarlin B., Thornton D. Improved ferritic rotor and cast steels for advanced steam power plants - a collaborate European effort in COST 501 1993, 1-4 March, Electric Power Reseach Institute Palo Alto CA, Washington DC, USA.
49. Orr J., Buchanan L.W., Everson H. The commercial development and evaluation of E 911, a strong 9%CrMoWVNbN steel for boiler tubes and headers. International Conference Advanced Heat Resistant Steels for Power Generation 1998, 27-29 April, Electric Power Research Institute Palo Alto CA, San Sebastian, Spain.
50. Masumoto H., Sakakibara M., Takahashi T., Sakurai H., Fujita T. Development of a 9%Cr-Mo-W steel for boiler tubes. First International EPRI Conference on Improved Coal-Fired Plants 1986, 19-21 November, Electric Power Research Institue Palo Alto CA, Palo Alto/USA.
51. Hald J. ECCC E911-P92 assessment, ECCC Data Sheet. published in September 2005 at the ECCC Creep Conference 2005, 12-14 September, Surrey KT22 7SA, ERA Technology Ltd, Leatherhead, London, UK.
52. Iseda A., Sawaragi Y., Kato S., Masuyama F. Development of a new 0.1C-11Cr-2W-0.4Mo-1Cu steel for large diameter and thick wall pipe for boilers. 5th International Conference on Creep of Materials 1992, 18-21 May 1992, ASM International, Materials Park, Ohio, Lake Buena Vista, Florida, USA.
53. Kimura K. Assessment of Long-Term Creep Strength and Review of Allowable Stress for High Cr Ferritic Creep Resistant Steels. ASME PVP2005-71039 2005, ASME New York NY, USA.
54. Strang A., Vodarek V. Modelling and experimental verification of minor phase composition changes in creep resistant 12%CrMoVNb steels 2000, 3-7 July 2000, Cambridge, UK, IOM Communication Ltd, London UK.
55. Kagawa Y., Tamura F., Ishiyama O., Matsumoto O., Honjo T., Tsuchiyama T., Manabe Y., Kadoya Y., Magoshi R., Kawi H. Development and manufacturing of the next generation of advanced 12%Cr steel rotor for 630°C steam temperature 2000, Wiesbaden, Germany, September 3-8, German Iron and Steel Institute, Düsseldorf, Germany.
56. Azuma T., Miki K., Tanaka Y. Effect of boron on microstructural change during creep deformation in 12%Cr heat resistant steel 2001, April, Electric Power Research Institue Palo Alto, CA Swansea, UK.
57. Fukuda M., Tsuda Y., Yamashita K., Shinozaki Y., Takahashi Materials and design for advanced high temperature steam turbines 2004, 207-221. Hilton Oceanfront Resort, October 25-28, Electric Power Research Institute Palo Alto CA, Hilton Head Island, SC, USA.
58. Kern T.U., Staubli M., Mayer K.H., Donth B., Zeiler G., DiGianfrancesco A. The European effort in development of new rotor materials - COST 536 2006, 18-20 September, Forschungszentrum Jülich, Liège, Belgium, Germany.
59. Kern T.U., Mayer K.H., Berger C., Zies G., Schwienheer M. Stand der Entwicklungsarbeiten in COST 522 für Hochtemperatur-Dampfturbinen 27. Vortragsveranstaltung FVHT 2004, 26 November, German Iron and Steel Institute, Düsseldorf, Germany.
60. Arai M., Doi H., Azuma T., Fuita T. Development of high WCoB-containing 12Cr Rotor Steels for use at 650°C in USC Power Plants 2003, 261-268. October 26-29, Steel Castings and Forgings Association of Japan, Kobe, Japan.
61. Kauffmann F., Mayer K.H., Straub S., Zies G., Scheu C., Willer D., Ruoff H., Maile K. Characterization of the precipitates in modern boron containing 9-12%Cr steels developed in the frame of the COST program 2006, 18-20 September, Forschungszentrum Jülich, Liège, Belgium, Germany.
62. Kager F., Böck N., Spiradek-Hahn K., Höfinger S., Brabetz M., Zeiler G. Superior long-term creep behaviour and microstructure evolution of 9%Cr-steels with boron 2006, 18-20 September, Forschungszentrum Jülich, Liège, Belgium, Germany.
63. Miki K., Azuma T., Ishiguro T. Improvement of long term creep strength in high Cr heat resistant steel 2003, 269-275. October 26-29, Steel Castings and Forgings Association of Japan, Kobe, Japan.
64. Scarlin B., Stamatelopoulos G.N. New boiler materials for advanced steam conditions 2002, 1091-1108. Part III, Forschungszentrum Jülich, Liège Belgium, Germany.
65. Bendick W., Vaillant J.C., Vandenberghe B., Lefebre Bo. VM12 - a new 12%Cr steel for boiler tubes, headers and steam pipes in USC power plants. EPRI International Conference on Materials and Corrosion Experiences for Fossil Power Plants 2003, Development of a new 12%Cr-steel for tubes and pipes in power plants up to 650°C, 18-21 November, Wild Dunes Resort, Isle of Palms, SC, USA, Hilton Oceanfront Resort, Hilton Head Island, SC, USA, October 25-28, 2004, Electric Power Research Institute Palo Alto CA.
66. Masuyama F. Steam plant material development in Japan 1807, Conference proceedings III, Liège, Belgium, September 1998, Forschungszentrum Jülich GmbH, Germany.
67. Bendick W. Neue Werkstoffentwicklung für moderne Hochleistungskraftwerke. VGB Tagung Werkstoffe und Qualitätssicherung 2004 2004, 10-11 März.
68. Blum R., Vanstone R.W., Messlier-Gouze C. Materials development for boilers and steam turbines operating at 700°C. 4th EPRI International Conference on Advanced in Material Technology for Fossil Power Plants 2004, 118-138. Hilton Oceanfront Resort, Hilton Head Island, SC, USA, October 25-28, Electric Power Research Institute Palo Alto CA.
69. Masuyama F., Landolt-Boernstein Numerical Data and Functional Relationships in Science and Technology. Creep Properties of Heat Resistant Steels and Superalloys 2004, 2. Group VIII, Materials Subvol. B, Springer Verlag, Berlin Germany. K. Yagi, G. Merckling, T.U. Kern, H. Irie, H. Warlimont (Eds.).
70. Danielsen H., Hald J. Z-phase in 9-12%Cr Steels 2004, April, VÄRMEFORSK Service AB, Stockholm, Sweden.
71. Sato A. Research project on innovative steels in Japan. International workshop on Innovative Structural Materials for Infrastructure in 21th Century 2000, Tsukuba, 12-13 January, NIMS Tsukuba, Japan.
72. Abe F., Igarashi M., Fujitsuna N., Muneki S. Alloy design of advanced ferritic steels for 650°C USC boilers. Conference on Advanced Heat Resistant Steels for Power Generation 1998, 27-29 April, Electric Power Research Institute Palo Alto CA, San Sebastian, Spain.
73. Semba H., Abe F. Development of creep resistant 9Cr-3W-3Co steel containing high boron for USC boilers. First International Conference Super-High Strength Steels 2005, 2-4 November, Centro Sviluppo Metallurgia, Rome, Italy.
74. Abe F. High performance creep resistant steels for the 21st century power plants. First International Conference Super-High Strength Steels 2005, 2-4 November, Centro Sviluppo Metallurgia, Rome, Italy.
75. Krainer H. 50Jahre nichtrostender Stahl. Stahl und Eisen 1962, 82:1527.
76. Strauses B. Non-rusting Cr-Ni steels. Proceedings American Society Test Materials 1924, 24:208.
77. Schottky H. German version of birth of stainless steels. Iron Age 1929, 1512. December 5.
78. Mitchel W.M. 18-8 and related stainless steels. Metals and Alloys 1940, January, 14.
79. Houdremont E., Schafmeister P. Verhütung der Korrosion bei Stählen mit 18%Cr und 8%Ni. Archiv. Eisenhuettenwesen 1933, 7:187.
80. Suzuki T. Historical Invent of Stainless Steels (in Japanese) 2000, 110. AGNE Technical Center, Tokyo.
81. Eberle F., Ely E.G., Dillon J.S. Experimental superheater for steam at 2000Psi and 1250F - Progress report after 12 000h of Operation. Trans. ASME 1956, 76:665.
82. Masuyama F. Materials for Advanced Power Engineering 1998, Part III 1998, 1807. Juelich GmbH, Forschungszentrum, Juelich. J. Lecomte-Beckers (Ed.).
83. Murray J.D. Welding Trails on Esshete 1250. Welding and Metal Fabrication 1962, 9:350.
84. Minami Y., Kimura K., Tanimura M. Creep rupture properties of 18%Cr-8%Ni-Ti-Nb and Type 347H Austenitic Stainless Steels. ASM International Conference New Development in Stainless Steel Technology 1984, Detroit, Michigan, September 17-21, ASM International, Materials Park, Ohio.
85. Yoshikawa K., Fujikawa H., Teranishi H., Yuzawa H., Kubota M. Fabrication and progress of corrosion-resistant TP347H stainless steel. ASM Conference Coatings and Bimetallic for Aggressive Environments 1985, 99. ASM International, Materials Park, Ohio 44073 1984. R.D. Sission (Ed.).
86. Sawaragi Y., Ogawa K., Kan S., Natori A., Hirano S. Development of the economical 18-8 Stainless Steel (SUPER 304) having elevated Temperature Strength for Fossil Power Boilers. Sumitomo Search 1992, 48:50.
87. Ishituka T., Mimura H. Development of New 18Cr-9Ni austenitic stainless steel boiler tube 2002, 1321. September 2002, Liège Belgium, Juelich GmbH, Forschungszentrum, Juelich. J. Lecomte-Beckers (Ed.).
88. Minami Y., Tohyama A., Hayakawa H. Properties and experiences with a new austenitic stainless steel (Tempaloy AA-1) for Boiler Tube Application 2002, 1445. September 2002, Liège Belgium, Juelich GmbH, Forschungszentrum, Juelich. J. Lecomte-Beckers (Ed.).
89. Masuyama F. History of power plants and progress in heat resistant steels. Transactions of Iron Steel Institute Japan, ISIJ International 2001, 41:612.
90. Shinoda T., Tanaka R. Role of carbide precipitations on creep rupture strength of austenitic stainless steels (in Japanese). Bulletin Japan Institute Metals 1972, 11:180.
91. Masuyama F. Advanced power plant development and material experiences in Japan 2006, 175. Liège, Belgium, Juelich GmbH, Forschungszentrum, Juelich. J. Lecomte-Beckers (Ed.).
92. Sawaragi Y. Elevated temperature strength and microstructure of several high strength austenitic steels. JSPS, 123 Committee Report on Heat Resistant Metallic Material 1985, 26:369.
93. Tamura M., Yamaguchi N., Tanimura M., Murase S. Processing alloys for the heat exchangers of advanced coal fired boilers. 1985 Exposition and Symposium, Industrial Heat Exchanger Technology 1985, Pittburgh, PA.
94. Sawaragi Y., Yoshikawa K. High temperature strength and microstructure of high strength and corrosion resistant austenitic steel for boiler (in Japanese). Tetsu-to-Hagane 1986, 72:S672.
95. Sawaragi Y., Teranishi H., Makiura H., Miura M., Kubota M. The development of HR3C steel with high elevated temperature strength and high corrosion resistance for boiler tubes (in Japanese). Sumitomo Metals 1985, 37:166.
96. Kikuchi M., Sakakibara M., Otoguro M., Mimura H., Araki S., Fujita T. An austenitic heat resisting steel tube developed for advanced fossil-fired steam plants. International Conference High Temperature Alloys 1985, Petten, Netherlands.
97. Toyama A., Minami Y., Yamada T. Effect of alloying elements on high temperature properties in an austenitic stainless steel containing high Cr (in Japanese). CAMP-ISIJ 1988, 1:928.
98. Semba H., Igarashi M., Sawaragi Y. Development of 23Cr-18Ni-3Cu-1.5W-Nb-N Austenitic Steel for USC Boilers. Proceedings International Conference Power Engineering-97 1997, 2:125. JSME, Tokyo.
99. Rautio R., Bruce S. Sandvik Sanicro 25, a new material for ultrasupercritical coal fired boiler. Advances in Material Technology for Fossil Power Plants 2005, 274. ASM International, Metals Park, OH. R. Viswanathan (Ed.).
100. Masuyama F. Landolt-Boernstein, Numerical Data and Functional Relationships in Science and Technology, Group VIII, Volume 2, Materials Subvolume B, Creep Properties of Heat Resistant Steels and Superalloys 2004, Springer Verlag, Berlin Germany. K. Yagi, G. Merckling, T.U. Kern, H. Irie, H. Warlimont (Eds.).
101. Kalwa G., Haarmann K., Janssen J.K. Experiences with ferritic and martensitic steels tubes and piping in nuclear and non-nuclear applications. Topical Conference Ferritic Alloys for Use in Nuclear Energy 1983, Technology, Metallurgical Society AIME, Snowbird. J.W. Davis, D.J. Michel (Eds.).
102. Sikka V.K., Ward C.T., Thomas K.C. Modified 9Cr-1Mo Steel - An Improved Alloy for Steam Generator Application. ASM International Conference Production, Fabrication, Properties and Applications of Ferritic Steels for High-Temperature Applications 1981, Warrendale, PA, ASM International, Materials Park, Ohio.
103. Sakakibara M., Masumoto H., Ogawa T., Takahashi, Fujita T. High Strength 9Cr-0.5Mo-1.8W(NF616) Steel for Boiler Tube (in Japanese). Thermal and Nuclear Power 1987, 38:841.
104. DeLong W.T., Ostrom G.A., Szumachowski E.R. Mearsurement and Calculation of Ferrite in Stainless Steel Weld Metal. Weld Journal 1956, 35:521S.
105. Masuyama F., Nishimura N., Haneda H., Ellis F.V., DeLong J.F. Investigation of the Deterioration plus Restoration Behaviour of fourteen Heats of TP316 Stainless Steel removed from Eddystone Unit No 1 Main Steam Lines after 130 520 h Service. Properties of Stainless Steels in Elevated Temperature Service 1987, 32:173. MPC-Vol. 26/PVP-Vol.
106. Yamamoto R., Kadoya Y., Ueta S., Nobe T., Magoshi R., Nishimoto S., Nakano T. Development of wrought Ni-based Superalloy with low Thermal Expansion for 700°C Steam Turbines. Advances in Material Technology for Fossil Power Plants 2005, 623. ASM International, Metals Park, OH. R. Viswanathan (Ed.).
107. Imano S., Doi H., Iijima E. Modification of Ni-Fe base Superalloy for Steam Turbine Applications. Advances in Material Technology for Fossil Power Plants 2005, 575. ASM International, Metals Park, OH. R. Viswanathan (Ed.).
108. Imai K. private communication 2006.
109. Takeda Y., Masuyama F. Heat Resistant Materials for Ultra Super Critical Power Plants (in Japanese). JSPS 123 Committee Report on Heat Resistant Metallic Material 1987, 29:399.
110. Furuya K., Hizume A., Takeda Y., Fujikawa T., Fujita A., Kinoshita S., Kohono M., Honjo T., Suzuki A. Austenitic Steel Rotor Forging for EPDC's WAKAMATSU 50MW High Temperature Turbine Project. Proc. 2nd Int. Conf. Improved Coal-Fired Power Plants 1989, 59. 1989, Electric Power Research Institute, Palo Alto CA, USA, 1.
111. Ohta S. Heat Resistant Steels for Chemical Industries (in Japanese). JSPS 123 Committee Report on Heat Resistant Metallic Material 1977, 18:383.
112. Koori M., Yosida T., Ohta S. Analysis and Prevention of Failures in Steam Reforming Furnace (in Japanese). Kobe Steel Technical Bulletin 1983, 33:65.
113. Weißbach W. Werkstoffkunde und Werkstoffprüfung 1979, Vieweg & Sohn, Braunschweig/Wiesbaden, Germany.
114. Bodnar R.L., Cappepellini R.F. Effects of residual elements in heavy forgings, past, present, future. Research Department Publication Bethlehem Steel Corporation 1986, Bethlehem, PA, Philadelphia, USA.
115. Schmollgruber F. Verfahrenswege zur Herstellung grosser Schmiedestücke und deren qualitative und wirtschaftliche Auswirkungen 1974, February, Dissertation TH Aachen.
116. Nutting J., Viswanathan R. Clean steel: superclean steel 1995, Conference Proceedings, 6-7 March 1995, London, UK.
117. Viswanathan R. Clean steel technology 1997, 2-5 November 1992, Chicago, Illinois, USA, ASM International, Materials Park Ohio.
118. Azuma T., Tanaka Y., Ikeda Y., Yoshida H. Production and properties of superclean 3.5%NiCrMoV rotor forgings for low pressure steam turbine 1992, 213-220. 2-5 November 1992, Chicago, Illinois, USA, ASM International, Materials Park Ohio.