Effect of acrylonitrile-butadiene-styrene on flow behavior and mechanical properties of polylactic acid/low density polyethylene blend

Asia-Pacific Journal of Chemical Engineering

Volumn 9, Issue 3, 2014, Pages 349-353

  Hamad, Kotiba ^a   Ko, Young Gun ^a   Kaseem, Mosab ^a   Deri, Fawaz ^b  

^a Yeungnam University   (South Korea)

^b DAMASCUS UNIVERSITY   (Syrian Arab Republic)

Author keywords

extrusion; mechanical properties; polylactic acid; rheology; ternary blends

Indexed keywords

ACTIVATION ENERGY; BUTADIENE; DENSITY (SPECIFIC GRAVITY); ELASTIC MODULI; EXTRUSION; MECHANICAL PROPERTIES; NON NEWTONIAN FLOW; POLYESTERS; POLYMER BLENDS; RHEOLOGY; SHEAR DEFORMATION; SHEAR VISCOSITY; STYRENE; TENSILE TESTING;

ACRYLONITRILE-BUTADIENE-STYRENE; FLOW ACTIVATION ENERGY; POLY LACTIC ACID; RHEOLOGICAL AND MECHANICAL PROPERTIES; RHEOLOGICAL PROPERTY; SHEAR-THINNING BEHAVIOR; SINGLE SCREW EXTRUDER; TERNARY BLENDS;

ABS RESINS;

EID: 84902545856     PISSN: 19322135     EISSN: 19322143     Source Type: Journal    
DOI: 10.1002/apj.1802     Document Type: Article

References (34)

1. F. Gironi, V. Piemonte,. Environ. Prog. Sustainable Energy, 2011; 30, 459-468.
2. V. Piemonte, F. Gironi,. Environ. Prog. Sustainable Energy, 2011; 30, 685-691.
3. C. Chandra, R. Rustgi,. Prog. Polym. Sci., 1998; 23, 1273-1335.
4. V. Piemonte, F. Gironi,. J. Polym. Environ., 2013; 21, 313-318.
5. V. Piemonte, S. Sabatini, F. Gironi,. J Polym. Environ., 2013; 21, 640-647.
6. K. Hamad, M. Kaseem, F. Deri,. J. Mater. Sci., 2011; 46, 3013-3019.
7. Y. Li, H. Shimizu,. Eur. Polym. J., 2009; 45, 738-746.
8. J.B. Lee, Y.K. Lee, G.D. Choi, S.W. Na, T.S. Park, W.N. Kim,. Polym. Degrad. Stab., 2011; 96, 553-560.
9. N. Wang, J. Yu, X. Ma,. Polym. Int., 2007; 56, 1440-1447.
10. N. Wang, J. Yu, P. Chang, X. Ma,. Starch, 2007; 59, 409-417.
11. N. Wang, J. Yu, X. Ma,. Polym. Compos., 2008; 29, 551-559.
12. N. Wang, J. Yu, P. Chang, X. Ma,. Carbohydr. Polym., 2008; 71, 109-118.
13. E. Schwach, J. Six, L. Averous,. J. Polym. Environ., 2008; 16, 286-297.
14. R. Wang, S. Wang, Y. Zhang, C. Wan, P. Ma,. Polym. Eng. Sci., 2009; 49, 26-33.
15. P. Bae, P. Yeon, M. Whan, I. Soon, Y. Sang,. Macromol. Res., 2010; 18, 463-471.
16. G. Biresaw, C.J. Carriere,. J. Polym. Sci., Part B: Polym. Phys., 2002; 40, 2248-2258.
17. G. Biresaw, C.J. Carriere,. Composites Part A, 2004; 35, 313-320.
18. A. Mohamed, S.H. Gordon, G. Biresaw,. J. Appl. Polym. Sci., 2007; 106, 1689-1696.
19. K. Hamad, M. Kaseem, F. Deri,. Polym. Bull., 2010; 65, 509-519.
20. H. Balakrishnan, A. Hassan, M.U. Wahit,. Elastomers Plast., 2010; 42, 223-239.
21. G. Singh, H. Bhunia, A. Rajor, R.N. Jana, V. Choudhary,. J. Appl. Polym. Sci., 2010; 118, 496-502.
22. K. Hamad, M. Kaseem, F. Deri,. Asia-Pac. J. Chem. Eng., 2012; 7, S310-S316.
23. A. Bourmaud, S. Pimbert,. Composites Part A, 2008; 39, 1444-1454.
24. N. Reddy, D. Nama, Y. Yang,. Polym. Degrad. Stab., 2008; 39, 233-241.
25. W.T. Yoo, H. Yoon, S. Choi, M.S. Kim, Y.H. Kim, W.N. Kim,. Macromol. Res., 2010; 18, 583-588.
26. K. Hamad, M. Kaseem, F. Deri,. J. Polym. Res., 2011; 18, 1799-1806.
27. F. Signori, M.B. Coltelli, S. Bronco,. Polym. Degrad. Stab., 2009; 94, 74-82.
28. H. Xiao, W. Lu, J. Yeh,. J. Appl. Polym. Sci., 2009; 112, 3754-3763.
29. S. Sun, M. Zhang, H. Zhang, X. Zhang,. J. Appl. Polym. Sci., 2011; 122, 2992-2999.
30. M. Jo, Y. Ryu, J. Ko,. J. Appl. Polym. Sci., 2012; 125, E231-E238.
31. J.Z. Liang, J.N. Ness,. Polym. Test., 1998; 17, 179-189.
32. M. Kaseem, K. Hamad, F. Deri,. Int. J. Polym. Mater., 2012; 62, 260-264.
33. K. Hamad, M. Kaseem, F. Deri,. J. Biomater. Nanobiotechnol., 2012; 3, 405-410.
34. M. Kaseem, K. Hamad, F. Deri,. Int. J. Plast. Technol., 2012; 16, 39-49.