Factors affecting the rheology and processability of highly filled suspensions

Annual Review of Chemical and Biomolecular Engineering

Volumn 5, Issue , 2014, Pages 229-254

  Kalyon, Dilhan M ^a   Aktaş, Seda ^a  

^a STEVENS INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Extrusion; Rheometry; Simulation; Slip; Viscoplasticity

Indexed keywords

AIR ENTRAINMENT; EXTRUSION; FILTRATION; INDUSTRIAL APPLICATIONS; PLASTICITY; RHEOMETERS; VISCOPLASTICITY; NUMERICAL METHODS;

DESIGN AND OPTIMIZATION; MANUFACTURING OPERATIONS; NUMERICAL SIMULATION METHOD; PERSONAL CARE INDUSTRY; RHEOMETRY; SHEAR-INDUCED MIGRATION; SIMULATION; SLIP;

SUSPENSIONS (FLUIDS);

AIR; CHEMICAL MODEL; CHEMISTRY; COMPUTER SIMULATION; ELASTICITY; EXTRUSION; FLOW KINETICS; FLOW MEASUREMENT; PARTICLE SIZE; REVIEW; SIMULATION; SLIP; SUSPENSION; VISCOPLASTICITY; VISCOSITY;

EXTRUSION; RHEOMETRY; SIMULATION; SLIP; VISCOPLASTICITY;

AIR; COMPUTER SIMULATION; ELASTICITY; MODELS, CHEMICAL; PARTICLE SIZE; RHEOLOGY; SUSPENSIONS; VISCOSITY;

EID: 84902441592     PISSN: 19475438     EISSN: None     Source Type: Journal    
DOI: 10.1146/annurev-chembioeng-060713-040211     Document Type: Review

References (149)

1. Krieger IM, Dougherty TJ. 1959. Amechanism for non-Newtonian flow in suspensions of rigid spheres. Trans. Soc. Rheol. 3:137-52
2. Quemada D. 1978. Rheology of concentrated dispersed systems II. A model for non-Newtonian shear viscosity in steady flows. Rheol. Acta 17:632-42
3. Kitano T, Kataoka T, Shirota T. 1981. An empirical-equation of the relative viscosity of polymer melts filled with various inorganic fillers. Rheol. Acta 20:207-9
4. Tsenoglou C. 1989. Viscoplasticity of agglomerated suspensions. Rheol. Acta 28:311-14
5. Qi F, Tanner R. 2012. Random close packing and relative viscosity of multimodal suspensions. Rheol. Acta 51:289-302
6. de Gennes PG. 1979. Conjectures on the transition from Poiseuille to plug flow in suspensions. J. Phys. 40:783-87
7. Jeffrey DJ, Acrivos A. 1976. The rheological properties of suspensions of rigid particles. AIChE J. 22:417-32
8. Mewis J, Spaull AJ. 1976. Rheology of concentrated dispersions. Adv. Colloid Interface Sci. 6:173-200
9. Onogi S, Matsumoto T. 1981. Rheological properties of polymer solutions and melts containing suspended particles. Polym. Eng. Rev. 1:45
10. Metzner AB. 1985. Rheology of suspensions in polymeric liquids. J. Rheol. 29:739-75
11. Kamal MR, Mutel A. 1985. Rheological properties of suspensions in Newtonian and non-Newtonian fluids. J. Polym. Eng. 5:293-382
12. Khan SA, Prud'homme RK. 1987. Melt rheology of filled thermoplastics. Rev. Chem. Eng. 3:205-70
13. Denn MM, Morris JF. 2014. Rheology of non-Brownian suspensions. Annu. Rev. Chem. Biomol. Eng. 5:203-28
14. Ouchiyama N, Tanaka T. 1984. Porosity of a mass of solid particles having a range of sizes. Ind. Eng. Chem. Fundam. 23:490
15. Fiske TJ, Railkar SB, Kalyon DM. 1994. Effects of segregation on the packing of symmetric and asymmetric particles with multimodal particle size distributions. Powder Technol. 81:57-64
16. McGeary RK. 1961. Mechanical packing of spherical particles. J. Am. Ceram. Soc. 44:513-22
17. Doi M, Edwards SF. 1986. Theory of Polymer Dynamics. New York: Oxford Univ. Press
18. Larson R. 1999. Structure and Rheology of Complex Fluids. New York: Oxford Univ. Press
19. Aral B, Kalyon DM. 1997. Viscoelastic material functions of noncolloidal suspensions with spherical particles. J. Rheol. 41:599-620
20. Montes S, White JL, Nakajima N. 1988. Rheological behavior of rubber carbon black compounds in various shear flow histories. J. Non-Newton. Fluid Mech. 28:183-212
21. Rong S, Chaffey CE. 1988. Composite viscoelasticity in glassy, transitional and molten states. II. Dynamical mechanical behavior. Rheol. Acta 27:186-96
22. Matsumoto T. 1989. Influence of ionic strength on rheological properties of concentrated aqueous silica colloids. J. Rheol. 33:371-79
23. KanaiH,Navarrete RC,MacoskoCW,Scriven LE. 1992. Fragile networks and rheology of concentrated suspensions. Rheol. Acta 31:333-44
24. Shikata T, Pearson DS. 1994. Viscoelastic behavior of spherical suspensions. J. Rheol. 38:601-16
25. Kalyon DM, Yilmazer U. 1990. Rheological behavior of highly filled suspensions which exhibit slip at the wall. In Polymer Rheology and Processing, ed. A Collyer, L Utracki, pp. 241-75. London: Elsevier Appl. Sci.
26. Yoshimura AS, Prud'homme RK. 1987. Response of an elastic Bingham fluid to oscillatory shear. Rheol. Acta 26:428-36
27. De Rosa ME,Winter HH. 1994. The effect of entanglements on the rheological behavior of polybutadiene critical gels. Rheol. Acta 33:220-37
28. Bird RB, Dai GC, Yarusso BJ. 1983. The rheology and flow of viscoplastic materials. Rev. Chem. Eng. 1:1-70
29. White JL. 1979. A plastic-viscoelastic constitutive equation to represent the rheological behavior of concentrated suspensions of small particles in polymer melts. J. Non-Newton. Fluid Mech. 5:177-90
30. Utracki L. 1984. The shear and elongational flow of polymer melts containing anisometric filler particles; part I. Rubber Chem. Technol. 57:507
31. Kitano T, Kataoka T, Nishimura T, Sakai T. 1980. Relative viscosities of polymer melts filled with inorganic fillers. Rheol. Acta 19:764-69
32. Tsenoglou C, Kalyon DM, Gogos C. 1988. A viscoelastic constitutive relationship in flowing polymer suspensions and composites. In Engineering Applications of New Composites, ed. S Paipetis, Omega Sci. UK: Oxon
33. Morris JF. 2009. A review of microstructure in concentrated suspensions and its implications for rheology and bulk flow. Rheol. Acta 48:909-23
34. Brady JF, Bossis G. 1988. Stokesian dynamics. Annu. Rev. Fluid Mech. 20:111-57
35. Sierou A, Brady JF. 2002. Rheology and microstructure in concentrated noncolloidal suspensions. J. Rheol. 46:1031
36. Morris JF, Katyal B. 2002. Microstructure from simulated Brownian suspension flows at large shear rate. Phys. Fluids 14:1920-37
37. Mall-Gleissle S, Gleissle S,McKinley G, BuggischH. 2002. The normal stress behaviour of suspensions with viscoelastic matrix fluids. Rheol. Acta 41:61-76
38. Onogi S, Matsumoto T,Warashina Y. 1973. Rheological properties of dispersions of spherical particles in polymer solutions. Trans. Soc. Rheol. 17:175-90
39. Yang MC, Scriven LE, Macosko CW. 1986. Some rheological measurements of magnetic iron oxide suspensions in silicone oil. J. Rheol. 30:1015-29
40. BogerD. 2013. Rheology of slurries and environmental impacts in the mining industry. Annu. Rev. Chem. Biomol. Eng. 4:239-57
41. Aral B, Kalyon DM, Gokturk H. 1992. The effects of air incorporation in concentrated suspension rheology. Soc. Plast. Eng. ANTEC Tech. Pap. 38:2448-51
42. Vand V. 1948. Viscosity of solutions and suspensions. I. Theory. J. Phys. Chem. 52:277-99
43. Vand V. 1948. Viscosity of solutions and suspensions. II. Experimental determination of the viscosityconcentration function of spherical suspensions. J. Phys. Chem. 52:300-14
44. Reiner M. 1960. Deformation, Strain and Flow. London: H.K. Lewis
45. Cohen Y, Metzner AB. 1985. Apparent slip flow of polymer solutions. J. Rheol. 29:67-102
46. Yilmazer U, Kalyon DM. 1989. Slip effects in capillary and parallel disk torsional flows of highly filled suspensions. J. Rheol. 33:1197-212
47. Hartman Kok PJA, Kazarian SG, Lawrence CJ, Briscoe BJ. 2002. Near-wall particle depletion in a flowing colloidal suspension. J. Rheol. 46:481-93
48. Tabuteau H, Baudez JC, Bertrand F, Coussot P. 2004. Mechanical characteristics and origin of wall slip in pasty biosolids. Rheol. Acta 43:168-74
49. Kalyon D. 2005. Apparent slip and viscoplasticity of concentrated suspensions. J. Rheol. 49:621-40
50. Ballesta P, Petekidis G, Isa L, Poon WCK, Besseling R. 2012. Wall slip and flow of concentrated hard-sphere colloidal suspensions. J. Rheol. 56:1005-37
51. Jana S, Kapoor B, Acrivos A. 1995. Apparent wall slip velocity coefficients in concentrated suspensions of noncolloidal particles. J. Rheol. 39:1123-32
52. Soltani F, Yilmazer U. 1998. Slip velocity and slip layer thickness in flow of concentrated suspensions. J. Appl. Polym. Sci. 70:515-22
53. Aral B, Kalyon DM. 1994. Effects of temperature and surface roughness on time-dependent development of wall slip in torsional flow of concentrated suspensions. J. Rheol. 38:957-72
54. Mooney M. 1931. Explicit formulas for slip and fluidity. J. Rheol. 2:210-22
55. Aktas S, Kalyon DM, Mar-Santibnez BM, Prez-Gonzlez J. 2014. Shear viscosity and wall slip behavior of a viscoplastic hydrogel. J. Rheol. 58(2):513-35
56. Ramamurthy AV. 1986. Wall slip in viscous fluids and influence of materials of construction. J. Rheol. 30:337-57
57. Kalika DS, Denn MM. 1987. Wall slip and extrudate distortion in linear low-density polyethylene. J. Rheol. 31:815-34
58. Hatzikiriakos SG,Dealy JM. 1991. Wall slip of molten high density polyethylene. I. Sliding plate rheometer studies. J. Rheol. 35:497-523
59. Hatzikiriakos SG,Dealy JM. 1992. Wall slip of molten high density polyethylenes. II. Capillary rheometer studies. J. Rheol. 36:703-41
60. Migler KB, Hervet H, Leger L. 1993. Slip transition of a polymer melt under shear stress. Phys. Rev. Lett. 70:287-90
61. Chen Y, Kalyon DM, Bayramli E. 1993. Effects of surface roughness and the chemical structure of materials of construction on wall slip behavior of linear low density polyethylene in capillary flow. J. Appl. Polym. Sci. 50:1169-77
62. Denn MM. 2001. Extrusion instabilities and wall slip. Annu. Rev. Fluid Mech. 33:265-87
63. Gevgilili H, Kalyon DM. 2001. Step strain flow: wall slip and other error sources. J. Rheol. 45:467-75
64. Denn MM. 2008. Polymer Melt Processing: Foundations in Fluid Mechanics and Heat Transfer. New York: Cambridge Univ. Press
65. Brochard F, De Gennes PG. 1992. Shear dependent slippage at polymer/solid interface. Langmuir 8:3033-37
66. Lger L, Hervet H, Massey G. 1997. The role of attached polymer molecules in wall slip. Trends Polym. Sci. 5:40-45
67. Kalyon D, Gevgilili H. 2003. Wall slip and extrudate distortion of three polymer melts. J. Rheol. 47:683-99
68. Kissi NE, Piau JM. 1990. The different capillary flow regimes of entangled polydimethylsiloxane polymers: macroscopic slip at the wall, hysteresis and cork flow. J. Non-Newton. Fluid Mech. 37:55-94
69. Kalyon D, Gevgilili H, Shah A. 2004. Detachment of the polymer melt from the roll surface: data from a shear roll extruder. Int. Polym. Process. 19:129-38
70. Tang HS, Kalyon DM. 2004. Estimation of the parameters of Herschel-Bulkley fluid under wall slip using a combination of capillary and squeeze flow viscometers. Rheol. Acta 43:80-88
71. Tang HS, Kalyon DM. 2008. Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip. J. Rheol. 52:507-26
72. Tang HS, Kalyon DM. 2008. Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: ramifications on development of flow instabilities. J. Rheol. 52:1069-90
73. Fujiyama M, Inata H. 2002. Melt fracture behavior of polypropylene-type resins with narrow molecular weight distribution: II. Suppression of sharkskin by addition of adhesive resins. J. Appl. Polym. Sci. 84:2120-27
74. Vinogradov GV, Ivanova LI. 1967. Viscous properties of polymer melts and elastomers exemplified by ethylene-propylene copolymer. Rheol. Acta 6:209-22
75. Person TJ, Denn MM. 1997. The effect of die materials and pressure-dependent slip on the extrusion of linear low-density polyethylene. J. Rheol. 41:249-65
76. Kumar A, Graham M. 1998. Effect of pressure-dependent slip on flow curve multiplicity. Rheol. Acta 37:245-55
77. Bolton B, Middleman S. 1980. Air entrainment in a roll coating system. Chem. Eng. Sci. 35:597-601
78. Canedo EL. 1985. Flow and mass transfer in driven cavities with a free surface. Ph D Thesis, Univ.Del.
79. Kalyon DM, Yazici R, Jacob C, Aral B, Sinton S. 1991. Effects of air entrainment on the rheology of concentrated suspensions during continuous processing. Polym. Eng. Sci. 31:1386-92
80. Kalyon DM, Jacob C, Yaras P. 1991. An experimental study of the degree of fill and melt densification in fully-intermeshing, co-rotating twin screw extruders. Plast. Rubber Comp. Proc. Appl. 16:193-200
81. Kalyon DM, Gokturk H, Yaras P, Aral B. 1995. Motion analysis of development of wall slip during die flow of concentrated suspensions. Soc. Plast. Eng. ANTEC Tech. Pap. 41:1130-34
82. Aral B, KalyonDM.1994. Rheology and extrudability of very concentrated suspensions: effects of vacuum imposition. Plast. Rubber Comp. Proc. Appl. 24:201-10
83. Abbott JR, Tetlow N, Graham AL, Altobelli SA, Fukushima E, et al. 1991. Experimental observations of particle migration in concentrated suspensions. Couette flow. J. Rheol. 35:773-96
84. Sinton SW, Chow AW. 1991. NMR flow imaging of fluids and solid suspensions in Poiseuille flow. J. Rheol. 35:735-72
85. Maneval J,McCarthyK,McCarthyM, Powell R. 1996. Nuclear magnetic resonance imaging rheometer. US Patent No. 5532593
86. Altobelli SA, Fukushima E, Mondy LA. 1997. Nuclear magnetic resonance imaging of particle migration in suspensions undergoing extrusion. J. Rheol. 41:1105-16
87. Arola DF, Barrall GA, Powell RL, McCarthy KL, McCarthy MJ. 1997. Use of nuclear magnetic resonance imaging as a viscometer for process monitoring. Chem. Eng. Sci. 52:2049-57
88. Raynaud JS, Moucheront P, Bertrand F, Guilbaud JP, Coussot P. 2002. Direct determination by nuclear magnetic resonance of the thixotropic and yielding behavior of suspensions. J. Rheol. 46:709-32
89. Coussot P, Raynaud JS, Bertrand F, Moucheront P, Guilbaud JP, et al. 2002. Coexistence of liquid and solid phases in flowing soft-glassy materials. Phys. Rev. Lett. 88:218301
90. Moraczewski T, Tang H, Shapley NC. 2005. Flow of a concentrated suspension through an abrupt axisymmetric expansion measured by nuclear magnetic resonance imaging. J. Rheol. 49:1409-28
91. Bonn D, Rodts S, Groenink M, Rafa S, Shahidzadeh-Bonn N, Coussot P. 2008. Some applications of magnetic resonance imaging in fluid mechanics: complex flows and complex fluids. Annu. Rev. Fluid Mech. 40:209-33
92. Prez-Gonzlez J, Lopez-Durn JJ, Mar-Santibnez BM, Rodruez-Gonzlez F. 2012. Rheo-PIV of a yield-stress fluid in a capillary with slip at the wall. Rheol. Acta 51:937-46
93. Kalyon DM, Yaras P, Aral B, Yilmazer UY. 1993. Rheological behavior of a concentrated suspension: a solid rocket fuel simulant. J. Rheol. 37:35-53
94. Wang Z, Lam YC, Chen X, Joshi SC. 2010. Viscosity corrections for concentrated suspension in capillary flow with wall slip. AIChE J. 56:1447-55
95. Kalyon DM, Gokturk HS. 1994. Adjustable gap rheometer. US Patent No. 5,277,058
96. Kalyon DM, Gokturk HS, Boz I. 1997. An adjustable gap in-line rheometer. Soc. Plast. Eng. ANTEC Tech. Pap. 43:2283-88
97. Kalyon D, Gevgilili H, Kowalczyk J, Prickett S, Murphy C. 2006. Use of adjustable-gap on-line and off-line slit rheometers for the characterization of the wall slip and shear viscosity behavior of energetic formulations. J. Energ. Mater. 24:175-93
98. Baek S. 2007. Micro slit viscometer with monolithically integrated pressure sensors. US Patent No. 7290441
99. Windhab E, Gleissle W. 1984. The flow behavior of highly concentrated suspensions determined with a new shear-And slip flow separating method. Proc. IX Congr. Rheol. Acapulco, Mex.: Univ. Nac. Auton. Mex.
100. O'Donovan EJ, Tanner RI. 1984. Numerical study of the Bingham squeeze film problem. J. Non-Newton. Fluid Mech. 15:75-83
101. Kalyon DM, Tang H. 2007. Inverse problem solution of squeeze flow for parameters of generalized Newtonian fluid and wall slip. J. Non-Newton. Fluid Mech. 143:133-40
102. Lipscomb GG, Denn MM. 1984. Flow of Bingham fluids in complex geometries. J. Non-Newton. Fluid Mech. 15:337-46
103. Silliman WJ, Scriven LE. 1980. Separating flow near a static contact line: slip at a wall and shape of free surface. J. Comput. Phys. 34:287
104. Ji Z, Gotsis A, Kalyon DM. 1990. Single screw extrusion processing of highly filled suspensions including wall slip. Soc. Plast. Eng. ANTEC Tech. Pap. 36:160-63
105. Lawal A,Kalyon DM. 1994. A non-isothermalmodel of single screw extrusion of generalizedNewtonian fluids. Numer. Heat Transf. 26:103-21
106. Lawal A, Railkar S, Kalyon DM. 2000. Mathematical modeling of three-dimensional die flows of viscoplastic fluids with wall slip. J. Reinf. Plast. Compos. 19:1483-92
107. White JL, Han MH, Nakajima N, Brzoskowski R. 1991. The influence of materials of construction on biconical rotor and capillary measurements of shear viscosity of rubber and its compounds and considerations of slippage. J. Rheol. 35:167-89
108. Lawal A, Kalyon DM, Yilmazer U. 1993. Extrusion and lubrication flows of viscoplastic fluids with wall slip. Chem. Eng. Commun. 122:127
109. Ferrs LI,Nobrega JM, Pinto FT. 2012. Analytical solutions for Newtonian and inelastic non-Newtonian flows with wall slip. J. Non-Newton. Fluid Mech. 175-76:76-88
110. Lawal A, Kalyon DM. 1998. Squeezing flow of viscoplastic fluids subject to wall slip. Polym. Eng. Sci. 38:1793-804
111. Lawal A, Kalyon DM. 2000. Compressive squeeze flow of viscoplastic fluids with apparent wall slip. Int. Polym. Process. 15:63-71
112. Lawal A, Kalyon DM. 1999. Analysis of nonisothermal screw extrusion processing of viscoplastic fluids with significant backflow. Chem. Eng. Sci. 54:999-1013
113. Lawal A, Kalyon DM. 1997. Viscous heating in nonisothermal die flows of viscoplastic fluids with wall slip. Chem. Eng. Sci. 52:1323-37
114. Kalyon D. 2010. An analytical model for steady coextrusion of viscoplastic fluids in thin slit dies with wall slip. Polym. Eng. Sci. 50:652-64
115. Kalyon D, Malik M. 2012. Axial laminar flow of viscoplastic fluids in a concentric annulus subject to wall slip. Rheol. Acta 51:805-20
116. Tang HS. 2012. Analysis on creeping channel flows of compressible fluids subject to wall slip. Rheol. Acta 51:421-39
117. Damianou Y, Georgiou GC, Moulitsas I. 2013. Combined effects of compressibility and slip in flows of a Herschel-Bulkley fluid. J. Non-Newton. Fluid Mech. 193:89-102
118. Bercovier M, Engelman M. 1980. A finite element method for incompressible non-Newtonian flows. J. Comput. Phys. 36:313-26
119. Papanastasiou TC. 1987. Flow of materials with yield. J. Rheol. 31:385-404
120. Burgos G, Alexandrou A, Antov V. 1999. On the determination of yield surfaces in Herschel-Bulkley fluids. J. Rheol. 43:463-83
121. Denn MM, Bonn D. 2011. Issues in the flow of yield-stress liquids. Rheol. Acta 50:307-15
122. ChatziminaM, Georgios CG, Argyropaidas I, Mitsoulis E, Huilgol RR. 2005. Cessation of Couette and Poiseuille flows of a Bingham plastic and finite stopping time. J. Non-Newton. Fluid Mech. 129:117-27
123. Kalyon DM, Lawal A, Yazici R, Yaras P, Railkar S. 1999. Mathematical modeling and experimental studies of twin screw extrusion of filled polymers. Polym. Eng. Sci. 39:1139-51
124. Malik M, Kalyon DM,Golba JC Jr. 2014. Simulation of co-rotating twin screw extrusion process subject to pressure-dependent wall slip at barrel and screw surfaces: 3D FEM analysis for combinations of forward-And revers-conveying screw elements. Int. Polym. Proc. 29:51-62
125. Huilgol RR, Menab B, Piau JM. 2002. Finite stopping time problems and rheometry of Bingham fluids. J. Non-Newton. Fluid Mech. 102:97-107
126. Vola D, Boscardin L, Latch JC. 2003. Laminar unsteady flows of Bingham fluids: a numerical strategy and some benchmark results. J. Comput. Phys. 187:441-56
127. Muravleva L, Muravleva E, Georgiou GC, Mitsoulis E. 2010. Numerical simulations of cessation flows of a Bingham plastic with the augmented Lagrangian method. J. Non-Newton. Fluid Mech. 165:544-50
128. Tadmor Z, Gogos CG. 1979. Principles of Polymer Processing. New York: JohnWiley & Sons
129. Kalyon D, Birinci E, Yazici R, Karuv B, Walsh S. 2002. Electrical properties of composites as affected by the degree of mixedness of the conductive filler in the polymer matrix. Polym. Eng. Sci. 42:1609-17
130. Kalyon DM, Dalwadi D, Erol M, Birinci E, Tsenoglou C. 2006. Rheological behavior of concentrated suspensions as affected by the dynamics of the mixing process. Rheol. Acta 45:641-58
131. Erol M, Kalyon D. 2005. Assessment of the degree of mixedness of filled polymers: effects of processing histories in batch mixer and co-rotating and counter-rotating twin screw extruders. Int. Polym. Proc. 20:228-37
132. Eckstein E, Bailey D, Shapiro A. 1997. Self-diffusion of particles in shear flow of a suspension. J. Fluid Mech. 79:191-208
133. Gadala-Maria F, Acrivos A. 1980. Shear-induced structure in a concentrated suspension of solid spheres. J. Rheol. 24:799-814
134. Leighton D, Acrivos A. 1987. Measurements of shear-induced self-diffusion in concentrated suspensions of spheres. J. Fluid Mech. 177:109-31
135. Leighton D, Acrivos A. 1987. The shear-induced migration of particles in concentrated suspensions of spheres. J. Fluid Mech. 181:415-30
136. Phillips RJ, Armstrong RC, Brown RA, Graham AL, Abbott JR. 1992. A constitutive equation for concentrated suspensions that accounts for shear-induced particle migration. Phys. Fluids A 4:30-40
137. Allende M, Kalyon D. 2000. Assessment of particle-migration effects in pressure-driven viscometric flows. J. Rheol. 44:79-90
138. YilmazerU,Gogos CG,Kalyon DM. 1989. Mat formation and unstable flows of highly filled suspensions in capillaries and continuous processors. Polym. Compos. 10:242-48
139. Yaras P, Kalyon DM, Yilmazer U. 1994. Flow instabilities in capillary flow of concentrated suspensions. Rheol. Acta 33:48-59
140. Delhaye N, Poitou A, Chaouche M. 2000. Squeeze flow of highly concentrated suspensions of spheres. J. Non-Newton. Fluid Mech. 94:67-74
141. Kaci A, Ouari N, Racineux G, Chaouchea M. 2011. Flow and blockage of highly concentrated granular suspensions in non-Newtonian fluid. Eur. J. Mech. B Fluids 30:129-34
142. Bi D, Zhang J, Chakraborty B, Behringer R. 2011. Jamming by shear. Nature 480:355-58
143. Yazici R, Kalyon DM. 2004. Method and apparatus for X-ray analysis of particle size. US Patent No. 6,751,287
144. Kalyon D. 2006. An overview of the rheological behavior and characterization of energetic formulations: ramifications on safety and product quality. J. Energ. Mat. 24:213-45
145. Kalyon D, Gevgilili H, Kowalczyk J, Prickett S, Murphy C. 2006. Use of adjustable-gap on-line and off-line slit rheometers for the characterization of the wall slip and shear viscosity behavior of energetic formulations. J. Energ. Mat. 24:175-93
146. Kalyon D, Tang H, Karuv B. 2006. Squeeze flow rheometry for rheological characterization of energetic formulations. J. Energ. Mat. 24:195-202
147. Kowalczyk J, Malik M, Kalyon D, Gevgilili H, Fair D, et al. 2007. Safety in design and manufacturing of extruders used for the continuous processing of energetic formulations. J. Energ. Mat. 25:247-71
148. Aktas S, Gevgilili H, Kucuk I, Sunol A, Kalyon D. 2013. Extrusion of poly(ether imide) foams using pressurized CO2: effects of imposition of supercritical conditions and nanosilica modifiers. Polym. Eng. Sci. In press. doi:10.1002/pen.23753
149. Kazarian S. 2000. Polymer processing with supercritical fluids. Polym. Sci. C 42:78-101