Corrosion of Aluminium

Corrosion of Aluminium

Volumn , Issue , 2004, Pages 1-626

  Vargel, Christian ^a  

^a International Chamber of Commerce   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84902390210     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-044495-6.X5000-9     Document Type: Book

References (660)

1. A. Rey (1993) Dictionnaire historique de la langue française. Paris: Le Robert (dir.)
2. J. Talbot (1995) Les éléments chimiques et les hommes. SIRPE
3. P. Pascal (1961) Nouveau traité de chimie minérale. Paris: Masson et Cie
4. H. Sainte-Claire Deville (1859) De l'aluminium, Ses properiétés, sa fabrication, et ses applications. Paris: Mallet-Bachelier 8.
5. J. Bocquentin (1992) La fabrication de l'aluminium par électrolyse, Histoire technique de la production de l'aluminium. Grenoble: PUG
6. D. Sainte-Claire Deville (avril 1927) Un alliage d'aluminium-magnésium-silicium: l'Almelec. Revue de l'Aluminium vol. 18
7. J. Suhr (avril 1927) Un alliage d'aluminium-magnésium-silicium: l'Almelec. Revue de l'Aluminium vol. 18
8. Technologie de fonderie en moules métalliques. T.1, Considérations théoriques et fonderie par gravité. T.2, Fonderie sous pression. Conception et calcul des systèmes d'alimentation en fonderie sous pression Sèvres: Editions techniques des industries de fonderie, CTIF
9. R. Develay (1992) Propriétés de l'aluminium et des alliages d'aluminium corroyés. Techniques de l'ingénieur, fasc M 438
10. R. Develay (1992) Propriétés de l'aluminium et des alliages d'aluminium corroyés. Techniques de l'ingénieur, fasc M 439
11. R. Develay (1992) Propriétés de l'aluminium et des alliages d'aluminium corroyés. Techniques de l'ingénieur, fasc M 440
12. R. Develay (1992) Propriétés de l'aluminium et des alliages d'aluminium corroyés. Techniques de l'ingénieur, fasc M 441
13. R. Develay (1989) Propriétés de l'aluminium et des alliages d'aluminium corroyés. Techniques de l'ingénieur, fasc M443
14. R. Develay (1985) Propriétés de l'aluminium et des alliages d'aluminium corroyés. Techniques de l'ingénieur, fasc M445
15. R. Develay (1989) Propriétés de l'aluminium et des alliages d'aluminium corroyés. Techniques de l'ingénieur, fasc M 446
16. R. Develay (1989) Propriétés de l'aluminium et des alliages d'aluminium corroyés. Techniques de l'ingénieur, fasc M447
17. R. Develay (1989) Propriétés de l'aluminium et des alliages d'aluminium corroyés. Techniques de l'ingénieur (fasc M448)
18. Demi-produits en aluminium Pechiney Rhenalu
19. A. Rey (Eds) (1993) Dictionnaire historique de la langue française Paris: Le Robert
20. W. Lynes (1951) Some historical developments relating to corrosion. Journal of the Electrochemical Society vol. 98 3c-10c.
21. T.P. Hoar and U.R. Evans (1932) Quantitative confirmation of electrochemical theory of corrosion of iron. Proceeding of Royal Society of London vol. 137 343.
22. C.A. Smith (1977) The corrosion story. Part 3, Zinc, lead and aluminum. Anti-Corrosion vol. 24 13-15.
23. J.L. Crolet (1979) Présentation des phénomènes de corrosion et des différents moyens de lutte disponibles. Revue de l'Institut français du pétrole vol. 34 929-946.
24. J. Philibert, A. Vignes, Y. Bréchet and P. Combrade (1998) Métallurgie: du mineral au matériau. Paris: Masson
25. J.M. Bryan (1948) Mechanism of the corrosion of aluminium. Chemistry & Industry 135-136.
26. R.T. Foley and T.H. Nguyen (1982) The chemical nature of aluminium corrosion V. Energy transfer in aluminium dissolution. Journal of the Electrochemical Society vol. 129 464-467.
27. G.W. Akimov (1955) Electrode potentials. Corrosion vol. 11 477t-486t. see also
28. G.W. Akimov (1955) Electrode potentials. Corrosion vol. 11 515t-534t.
29. M. Reboul (1977) Corrosion galvanique de l'aluminium. Revue de l'aluminium 404-419.
30. W.H. Ailor (1970) Flowing sea water corrosion potentials of aluminum alloys. NACE, paper no. 36, Houston
31. L.L. Shreir, R.A. Jarman and G.T. Burnstein (Eds) (1994) 3rd edition Corrosion Metal/Environment Control vol. 2 Oxford: Butterworth-Heinemann
32. J.R. Crum and R.C. Scarberry (October 1984) Development of galvanic series in various acid and environments. Conference of Nickel-base Alloys Cincinnati, OH 53-57.
33. F.L. Laque (1975) Marine corrosion, causes and prevention. New York: Wiley
34. R.H. Brown and W.L. Fink (1940) Measurement of irreversible potentials as a metallurgical research tool. Transactions of American Institute of Mining and Metallurgical Engineers 1234. technical publication
35. T.D. Burleigh, F.S. Bovard and R.C. Rennick (1993) Corrosion potential for aluminium alloys measured by ASTM G. 69. Corrosion vol. 49 683-685.
36. E.H. Hollingsworth and H.Y. Hunsicker (1990) Corrosion of aluminum and alluminum alloys. Handbook ASM vol. 30 583-609.
37. M. Pourbaix (1957) Leçons sur la corrosion électrochimique. Cebelcor, rapport technique
38. E. Deltombe and M. Pourbaix (décembre 1956) Comportement électrochimique de l'aluminium, diagramme d'équilibre tension pH du système Al-H 2O à 25°C. Cebelcor, rapport technique no. 42
39. J.C. Scully (1975) 2nd edition The fundamentals of corrosion vol. 17 Oxford: Pergamon International International serious of monographs on materials science and technology
40. P. Gimenez Ph., J.J. Rameau and M. Reboul (1982) Diagramme experimental potentiel pH de l'aluminium pour l'eau de mer. Revue de l'aluminium 261-272.
41. P. Gimenez Ph., J.J. Rameau and M. Reboul (1981) Experimental pH potential diagram of aluminium for sea water. Corrosion vol. 37 673-682.
42. J.W. Richards (1896) Aluminium, its History, Occurrence, Properties, Metallurgy and Application, including its alloys, Philadelphie
43. Wefers K., Misra C., Oxides and hydroxides of aluminium, Alcoa, technical, paper no. 19 revised (450 références).
44. E.A. Gulbransen and W.S. Wysong (1947) Thin oxyde film on aluminium. Journal of Physic and Colloid Chemicals vol. 51 1087-1103.
45. N.F. Mott (1939) Theory of the formation of protective oxides films on metals. Transactions of the Faraday Society vol. 35 1175-1177.
46. N. Cabrera (1948) Sur l'oxydation de l'aluminium à basse température. Revue de Métallurgie vol. 45 86-92.
47. G. Tolley (1950) The oxide film on aluminium. Consideration of experimental facts. Metal Industry vol. 77 255-258.
48. M.S. Hunter and P. Fowle (1956) Natural and thermally oxide films on aluminum. Journal of the Electrochemical Society vol. 103 482-485.
49. H.P. Godard (1967) Oxyde film growth over five years on some aluminum sheet alloys of varying humiditat room temperature. Journal of the Electrochemical Society vol. 114 354-356.
50. W.W. Smeltzer (1955) Principles applicable to the oxydation and corrosion of metals and alloys. Corrosion vol. 11 366t-374t.
51. H.M. Dunlop and M. Benmalek (2 octobre 1996) Role and caracterization of surfaces in the aluminium industry. 9e Entretiens du Centre Jacques Cartier École polytechnique de Montréal
52. A.Y. Chatalov (1952) Effet du pH sur le comportement électrochimique des métaux et leur résistance à la corrosion. Dokl. Akad Nauk, SSSR (nos 86), 775-777.
53. E.H. Hollingworth and H.Y. Hunsicker (1990) Corrosion of aluminium and aluminium alloys. Metal Handbook ASM vol. 2 608.
54. M.R. Tabrzi, S.B. Lyon, G.E. Thompson and J. Ferguson (1991) The long term corrosion of aluminium in alkaline media. Corrosion Science vol. 32 733-742.
55. M. Reboul (1973) Méthodes de mesure de la corrosion généralisée de l'aluminium et de ses alliages. Revue de l'Aluminium (nos 419), 62-73.
56. H. Kaesche (1969) Mécanisme de la corrosion par piqûres. Corrosion Traitements Protection Finition vol. 17 389-396.
57. M. Reboul, T. Warner, H. Mayet and B. Baroux (1997) A ten step mechanism for the pitting corrosion of aluminium alloys. Corrosion Reviews vol. 15(nos 3-4), 471-496.
58. F.D. Bogar and F.D. Foley (1973) The influence of chloride ion on the pitting of aluminium. Journal of the Electrochemical Society vol. 119 462-464.
59. R.H. Brown and R.B. Mears (1938) The electrochemistry of corrosion. Transactions of the Electrochemical Society vol. 74 495.
60. H.P. Godard (1960) The corrosion behavior of aluminium in natural waters. The Canadian Journal of Chemical Engineering vol. 38 167-173.
61. C. Groot and V.H. Troutner (June 1956) Corrosion of aluminium in tap water. USAEC, report HW 43085
62. F.A. Champion (1949) Metal thickness and corrosion effects. Metal Industry vol. 74 7-9.
63. M. Reboul, T. Odièvre and T.J. Warner (1997) Pit depth measurement on aluminium alloys by image analysis of radiographic films. Trondheim: Eurocor 271-278.
64. P.M. Aziz (1956) Application of the statistical theory of extreme values to the analysis of maximum pit depth data for aluminum. Corrosion vol. 12 495t-506t.
65. E.J. Gumbel (1954) Statistical theory of extreme values and some practical applications. US Department of Commerce, Applied Mathematics Series 33
66. F.A. Champion (1949) Metal thickness and corrosion effects. Metal Industry vol. 74 7-9.
67. B.W. Lifka and D.O. Sprowls (1972) Significance of intergranular corrosion in high-strength aluminum alloy products. ASTM, STP vol. 516 120-144.
68. F. Rohrmann (1934) Transactions of the Electrochemical Society vol. 66 229.
69. E.C.W. Peryman (1953) Grain-boundary general corrosion of high-purity aluminium and hydrochloric acid. Journal of Metals vol. 5 911-917.
70. S.J. Ketcham and I.S. Shaffer (1972) Exfoliation corrosion of aluminum alloys. ASTM, STP vol. 516 3-16.
71. D.O. Sprowls, J.D. Walsh and M.B. Shumaker (1972) Simplified exfoliation testing of aluminum, alloys. ASTM, STP vol. 516 38-65.
72. H.R. Rawdon, A.I. Krynitski and J.F. Berliner (1922) Brittleness developed in aluminium and duralumin by stress and corrosion. Chemical Metallurgy Engineering vol. 26 154-160.
73. D. Desjardins and R. Oltra (1990) Introduction à la corrosion sous contrainte. D. Desjardins, R. Oltra, (Eds) Corrosion sous contrainte, phénoménologie et mécanismes Bombannes: Éditions de Physique, Les Ulis 1-17.
74. J.J. Bodu (1990) Expérience pratique de la corrosion sous contrainte dans l'industrie aéronautique. D. Desjardins, R. Oltra, (Eds) Corrosion sous contrainte, phénoménologie et mécanismes Bombannes: Éditions de Physique, Les Ulis 797-817.
75. D.O. Sprowls and R.H. Brown (1967) Stress-corrosion mechanisms for aluminum alloys. Conference Fundamentals Aspects Stress Corrosion Cracking NACE, Houston 466-512.
76. R.H. Brown, D.O. Sprowls and M.B. Shumaker (1972) The resistance of wrought high strength aluminum alloys to stress-corrosion cracking. Conference Stress Corrosion Cracking. A state of the art ASTM, STP vol. 518 87-118.
77. M.O. Speidel and M.V. Hyatt (1972) Stress-corrosion cracking of high strength aluminum alloys vol. 2 New York: Plenum Press 115-335. Advances in corrosion science and technology
78. P. Brenner (1932) Studies on stress-corrosion cracks in light metals. Z. Metallkunde vol. 24 145-151.
79. R.B. Mears, R.H. Brown and E.H. Dix (1944) A generalized theory of stress-corrosion of alloys. Symposium on Stress-Corrosion Cracking of metals ASTM and AIME 323-344.
80. M. Reboul (1990) La corrosion sous contrainte des alliages d'aluminium. D. Desjardins, R. Oltra, (Eds) Corrosion sous contrainte, phénoménologie et mécanismes Bombannes: Éditions de Physique, Les Ulis 623-643.
81. G.M. Scamans, R. Alani and P.R. Swann (1976) Pre-exposure embrittlement and stress-corrosion failure in AlMgZn alloys. Corrosion Science vol. 16 443-459.
82. R. Ambat and E.S. Dwaarkadasa (1996) Effect of hydrogen in aluminium and aluminum alloys: A review. Bulletin of Materials Science vol. 19 103-114.
83. C. Lemaître (1986) Influence de l'environnement mécanique sur les propriétés de tenue à la corrosion des alliages métalliques. Métaux Corrosion-Industrie vol. 61 1-16.
84. D.O. Sprowls and R.H. Brown (1962) What every engineer should know about stress-corrosion of aluminium. Metal Progress vol. 81 77-83.
85. C.F. Sharman (1944) Filiform under film corrosion of laquered steel surface. Nature (nos 3890), 621.
86. J.P. Rique (1984) La corrosion filiforme dans les peintures pour l'aéronautique. Surfaces vol. 117 55-66.
87. H. Kaesche (1959) Études relatives à la corrosion filiforme des tôles d'acier laquées. Werkstoffe und Korrosion vol. 11 668-681.
88. G.D. Steele (1994) Filiform corrosion on architectural aluminium. A review. Anti-Corosion Materials & Methods vol. 41 8-12.
89. J. Pietschmann (1993) Filiform corrosion of organically coated aluminium. Part 1. Aluminium vol. 69 1019-1023.
90. J. Pietschmann (1993) Filiform corrosion of organically coated aluminium. Part 2. Aluminium vol. 69 1081-1084.
91. C. Fiaud, G. Azerad and E. Grosgogeat (1986) Corrosion de l'aluminium sous couche mince électrolytique, corrosion à la ligne d'eau et corrosion au stockage. Journées Durabilité de l'aluminium et de ses alliages dans les industries électriques, Cefracor 33-37.
92. M. Reboul and M. Touche (1983) Examen de deux radeaux en aluminium après 8 et 35 ans en mer. rapport Pechiney CRV
93. I.L. Rozenfeld (1974) Crevice corrosion of metals and alloys. NACE, 3, Localized Corrosion 373-398.
94. M.G. Fontana and N.D. Greene (1998) Corrosion engineering. New York: McGraw-Hill
95. A.J. Betts and L.H. Boulton (1993) Crevice corrosion: Review of mechanism, modeling and mitigation. British Corrosion Journal vol. 28 279-295.
96. R.L. Dillon and R.S. Hope (April 1953) Erosion-corrosion of aluminum alloys. REV, rapport HW-74359
97. C.R. Gatelier (1973) Pollution microbienne des carburants et corrosion des réservoirs. Corrosion Traitements Protections et Finitions vol. 21 103-109.
98. W.B. Engel (1970) Role of metallic ion concentration in the corrosion of metals. 25th Conference NACE 588-596.
99. H.G. Hedrick, M.G. Crum, R.J. Reynolds and S.C. Culver (1967) Mechanism of microbiological corrosion of aluminum alloys. Electrochemical Technology 75-77.
100. H.G. Hedrick (1970) Microbiological corrosion of aluminum. 25th Conference NACE 609-619.
101. H.P. Godard and W.E. Cooke (1960) The analysis and composition of aluminium corrosion products. Corrosion vol. 16 181t-187t.
102. R. Takabeya (1987) Aluminium corrosion products formed in atmospheric environments. Corrosion Engineering vol. 36 279-286.
103. L. Lepina and Z. Ose (1950) Colloidal-chemical effects at surfaces of metals and inhibition of corrosion in salt solution. Composition and structure of the corrosion products of aluminium in potassium chloride solutions. Latvijas PSR Zinntnu Akad Vestis (nos 6), 35-46.
104. R.A. Heine (1959) Observations on the corrosion of aluminium and its alloys in relation to chemical examination of the corrosion products. Journal of Applied Chemicals vol. 9 43-49.
105. K.R. Trethewey and D.A. Sargeant (1992) The galvanic effect: a continuing corrosion problem. Metals and Materials vol. 8 378-382.
106. C. Vargel (1991) La corrosion des bateaux en aluminium. Loisirs Nautiques nos 241 16-24.
107. S.M. Toy, W.D. English and W.E. Crane (1968) Studies of galvanic corrosion couples in liquid fluorine. Corrosion vol. 24 418-421.
108. J.W. Oldfield (1988) Electrochemical theory of galvanic corrosion. ASTM, STP 978 5-22.
109. F. Mansfeld and J.V. Henkel (1975) Galvanic corrosion of aluminum alloys. III. Effect of area ratio. Corrosion Science vol. 15 239-250.
110. H.P. Godard (1963) Galvanic corrosion of aluminium in the atmosphere. Materials Protection 38-47.
111. W.H. Caruthers (1975) Aluminium and its alloys. Process Industries Corrosion Houston: NACE 201-206.
112. J.E. Leeper (1981) Mercury corrosion in liquefied natural gas plants. Energy Processing Canada vol. 73 46-51.
113. W.W. Bodle, A. Attari and R. Serauskas (1980) Considerations for mercury in LNG operations. International Conference Liquefied Natural Gas, session II Chicago
114. J.J. English and G. Kobrin (1989) Liquid mercury embrittlement of aluminum. Materials Selection and Design 62-63.
115. M.R. Pinel and J.E. Bennett (1972) Voluminous oxidation of aluminium by continuous dissolution on a wetting mercury film. Journal of Materials Science vol. 7 1016-1026.
116. J.E. Bennett and M.R. Pinel (1973) Reactions between mercury wetted aluminium and water. Journal of Materials Science vol. 8 1189-1193.
117. H.J. Allsopp (1977) A chemical treatment for mercury accidentally spilled in aircraft. RAF, technical report 77014 AD A O43160
118. A.R.G. Brown (1974) Corrosion of carbon fiber reinforced plastic to metal couple in saline water. Conference Plastics and Polymers paper 35 230-241.
119. J. Boyd, G. Chang, W. Webb, S. Speak, D. Gerth and B. Reck (1991) Galvanic Corrosion Effects on Carbon Fiber Composites. 36th International SAMPE Symposium 1, vol. 36, San Diego 1217-1231.
120. K.G. Compton and A. Mendizza (1956) Galvanic couple corrosion studies by means of the threated bolt and wire test. ASTM, STP 175 116-125.
121. L.C. Rowe (1974) Preventing galvanic corrosion. Society of Automotive Engineers 40-45.
122. Transitions spacers developed for dissimilar metal joints to minimize corrosion and simplify joining Welding Journal vol. 56 51-53.
123. R. Baboian and H. Bardner (1994) Reducing corrosion in aluminium-steel joints. Automotive Engineering vol. 102 103-105.
124. F.A. Champion (1952) Corrosion testing procedures. Londres: Chapman & Hall
125. D.H. Thompson (1971) General test and principles. W.H. Ailor, (Eds) Handbook on corrosion testing and evaluation New York: Wiley 115-141.
126. S.J. Ketcham and E.J. Jankowski (1985) Developing an accelerated test: Problems of pitfalls. ASTM, STP 866 14-23.
127. D.O. Sprowls, T.J. Summerson and F.E. Lofting (1974) Exfoliation corrosion testing of 7075 and 7178 aluminium alloys. ASTM, STP 558 99-113.
128. D.O. Sprowls, J.D. Walsh and M.B. Shumaker (1972) Simplified exforlation testing of aluminum alloys. ASTM, STP 516 38-65.
129. T.S. Humphries and E.E. Nelson (January 1981) Seacost stress-corrosion cracking of aluminium alloys. NASA, technical momorandum 82393
130. B.W. Lifka (1987) Corrosion resistance of aluminium alloys plate in rural, industrial and sea-cost atmospheres. Aluminium vol. 63 1256-1261.
131. G.S. Haynes and R. Baboian (1988) Simulating automotive exposure for corrosion testing of trim materials. ASTM, STP 970 18-26.
132. B.R. Pathak (1971) Testing in fresh waters. Handbook on corrosion testing and evaluation. New York: Wiley 553-574.
133. S.C. Dexter (1988) Laboratory solutions for studying corrosion of aluminium alloys in sea water. ASTM, STP 970 217-234.
134. S.K. Coburn (1971) Atmospheric tests. W.H. Ailor, (Eds) Handbook on Corrosion testing and evaluation New York: Wiley
135. C.W. Borgman and R.B. Mears (1937) The principles of corrosion testing. ASTM Symposium of Corrosion Testing 3-35.
136. E.L. Liening (1986) Electrochemical corrosion testing techniques. The theory and the practice. Process Industries Corrosion Houston: NACE 85-122.
137. R.H. Brown and R.B. Mears (1938) The electrochemistry of corrosion. Transactions of the Electrochemical Society vol. 74 495-517.
138. M. Stern and A.I. Geary (1957) Electrochemical polarization. A theorical analysis of the shape of polarization curves. Journal of the Electrochemical Society vol. 104 56-63.
139. M. Reboul (1973) Méthodes de mesure de la corrosion généralisée de l'aluminium et de ses alliages. Revue de l'Aluminium no. 419 399-412.
140. M. Stern (1958) A method for determining corrosion rate from linear polarisation data. Corrosion vol. 14 60-64.
141. D.G. Altenpohl (1962) Use of boehmite films for corrosion protection of aluminium. Corrosion vol. 18 143t-153t.
142. R.K. Hart (1956) The formation of films on aluminium immersed in water. Transaction of the Faraday Society vol. 53 1020-1027.
143. T. Uchiyama, M. Hasegawa and H. Matsumoto (1986) A study on chemical conversion coating formed on aluminium in boiling sea water. Journal of Metals Finishing Society Japan vol. 37 28-33.
144. M. Koudelkhova, H. Augusynski and H. Berthou (1977) On the composition of the passivating films formed on aluminium in chromate solutions. Journal of the Electrochemical Society vol. 124 1165-1168.
145. G.M. Brown, K. Shimoizu, K. Kobayashi, G.E. Thompson and G.C. Wood (1993) The development of chemical conversion coating on aluminium. Corrosion Science vol. 35 253-256.
146. W. Helling and H. Neunzig (1936) Das Färben von Aluminium und seinen Legierungen mit anorganischen Stoffen auf MBV-Grundlage. Aluminium vol. 18 608-617.
147. C. Hess (1951) Le procédé Alodine. Protection galvanique de l'aluminium. Revue de l'Aluminium vol. 174 44-50.
148. R. Sticklen (1952) New protective treatment for aluminium simplifies processing at reduced cost. Materials & Methods vol. 35 91-95.
149. L.F. Spencer (1960) Conversion coatings. Chromates films. Metal Finishing vol. 58 58-65.
150. J.C. Masson (1990) Les traitements de conversion des alliages de l'aluminium. Gennevilliers: CFPI
151. B.R. Hinton (1991) Corrosion prevention and chromates, the end of an era. Metal Finishing vol. 89(nos 9), 55-61. see also
152. B.R. Hinton (1991) Corrosion prevention and chromates, the end of an era. Metal Finishing vol. 10(nos 9), 15-20.
153. F. Mansfeld and Y. Wang (1994) Corrosion protection of high copper aluminium alloys by surface modification. British Corrosion Journal vol. 29 194-200.
154. M. Schmith, L.J. Aljinovic and J. Radosevic (1995) Examination of efficiency of cerium passivation coating on a aluminium alloys. Eighth European Symposium on Corrosion Inhibitors Ferrara 851-860.
155. J.W. Biber (1995) A chrome-free conversion coating for aluminium with the corrosion of chrome. Conference Lightweight Automotive Applications Orlando 392.
156. J.S. Snodgrass and J.R. Weir (1995) Corrosion test selection, for aluminium autobody sheet with chromoun-free pretreatments. Conference Lightweight Automotive Applications Orlando 380.
157. R.G. Buscheit, C.A. Drevien, M.A. Martinez and G.E. Stoner (1995) Processing and properties of chrome-free conversion coatings on aluminium. Conference Lightweight Automotive Applications Orlando 390.
158. H. Buff (1857) Liebigs Ann. Chem. vol. 102 265-284.
159. J. Patrie (1949) Le mécanisme de l'oxydation électrolytique et la formation des couches d'oxyde d'aluminium. Revue de l'Aluminium 397-403. see also
160. J. Patrie (1950) Le mécanisme de l'oxydation électrolytique et la formation des couches d'oxyde d'aluminium. Revue de l'Aluminium 3-7.
161. L. Whitby (1948) Anodic oxyde coating. Influence of sealing treatments on protective value. Metal Industry vol. 72 400-403.
162. A. Guilhaudis and R. Bourbon (1954) La protection de l'aluminium et de ses alliages par peinture. Revue de l'Aluminium (nos 206), 7-10. see also
163. A. Guilhaudis and R. Bourbon (1954) La protection de l'aluminium et de ses alliages par peinture. Revue de l'Aluminium vol. 207 47-51.
164. C.V. Lundberg (1990) Long-term weathering of organic and inorganic coatings on steel and on aluminium. ASTM, STP 1086 122-155.
165. W. Lynes (1951) Some historical developments relating to corrosion. Journal of the Electrochemical Society vol. 98 3c-10c.
166. X. Van de Ven and H. Koelmans (1976) The cathodic corrosion of aluminum. Journal of the Electrochemical Society vol. 123 143-144.
167. M. Cerny (1975) Present state of knowledge about cathodic protection of aluminum. Zashchita Metallov vol. 11 687-698.
168. J.F. Whiting and T.E. Wright (1961) Cathodic protection for an uncoated aluminium pipeline. Corrosion vol. 17 8.
169. K.G. Watkins and D.E. Davies (1987) Cathodic protection of 6351 aluminium alloys in sea water: protection potential and surface pH effects. British Corrosion Journal vol. 22 157-161.
170. E.H. Dix (August 1927) Alclad, a new corrosion resistant aluminium product. National Advisory Committe for Aeronautics, technical note no. 259
171. M. Pubellier, et al. (1934) Bimetal: le Vedal, Aciers spéciaux. Métaux et Alliages vol. 9 535-536.
172. C.J. Walton, D.O. Sprowls and J.A. Nock (1953) Resistance of aluminum alloys to Weathering. Corrosion vol. 9 345-358.
173. F. Keller and R.H. Brown (1943) The heat treatment of 24S and Alclad 24S alloy products, Alcoa. technical paper (no. 9)
174. G. Gauthier (1953) Lacunes de couches d'aluminium de placage de l'alliage A-U4G (Duralumin) compatibles avec la protection contre la corrosion. Revue de métallurgie vol. 50 551-557.
175. S. Wernick and R. Pinner (1955) Surface treatment and finishing of light metals. Part 10, The zinc immersion process. Sheet Metals Industry vol. 32 189-197.
176. M.R. Bothwell (1965) New technique enhances corrosion resistance of aluminium. Metal Progress vol. 87 81-83.
177. Y.G. Kweon and C. Coddet (1992) Behavior in sea water of zinc-base coatings on aluminium alloy 5086. Corrosion vol. 48 97-102.
178. I.N. Putilova, S.A. Balezin and V.P. Barranik (1960) Metallic Corrosion Inhibitors Oxford: Pergamon Press
179. H. Röhrig (1935) Additions which reduce the attack of solutions on aluminium. Aluminium vol. 17 559-562.
180. B.D. Oakes (1981) Historical review inhibitors mechanisms. NACE Corrosion (No. 248)
181. O.L. Riggs (1973) Theoretical aspects of corrosion inhibitors and inhibition. C.C. Nathan, (Eds) Corrosion Inhibitors Houston: NACE 7-27.
182. J. Frasch (1966) Problèmes actuels d'inhibition. Corrosion et Anticorrosion vol. 14 204-209. see also
183. J. Frasch (1966) Problèmes actuels d'inhibition. Corrosion et Anticorrosion vol. 14 261-269.
184. J.D. Jackson, P.D. Miller, F.W. Fink and W.K. Boyd (May 1965) Corrosion of materials by ethylene glycolwater. Battelle, report DMIC 216
185. H. Sigurdsson and R. Tsuvik (June 1986) Corrosion of aluminium in water based heat exchangers systems. 10th Scandinavian Corrosion Congress 65-72.
186. T.S. Humphries (1978) Corrosion inhibitors for solar heatings and cooling systems. US Department of Energy, report DOE/NASA TM-78180
187. J. Ourvier-Buffet and J. Pagetti (1975) Recherche de quelques inhibiteurs de corrosion de l'alliage aluminium-silicium-magnésium dans des solutions de soude 0.1 N. Métaux Corrosion et Industrie vol. 50 180-188.
188. G. Dauphin, J.P. Labbé, F. Michel, J. Pagetti and E. Triki (1977) Inhibition de la corrosion de quelques alliages d'aluminium au cours des opérations de nettoyage et de désinfection pratiquées dans l'industrie alimentaire. Métaux Corrosion et Industrie vol. 52 253-261.
189. M. Khobaib, F.W. Wahldiek and C.T. Lynch (1981) New concepts in multifonctionnal corrosion inhibition for aircraft and other systems. Conference AGARD vol. 315
190. M.N. Desai, S.M. Desai, M.H. Gandhi and C.B. Shah (1971) Corrosion inhibitors for aluminium and aluminium based alloys. Anti-Corrosion vol. 18(nos 4), 8-13.
191. M.N. Desai, S.M. Desai, M.H. Gandhi and C.B. Shah (1971) Corrosion inhibitors for aluminium and aluminium based alloys. Part I. Anti-Corrosion vol. 18(nos 5), 4-10.
192. A.H. Roebuck (1973) C.C. Nathan, (Eds) Inhibition of aluminium Corrosion Inhibitors Houston: NACE 240-244.
193. P. Junière and M. Sigwalt (1961) Les applications de l'aluminium dans les industries chimiques et alimentaires. Paris: Masson
194. G.D. Wilcox, D.R. Gabe and M.E. Warwick (1986) The role of molybdates in corrosion prevention. Corrosion Reviews vol. 6 327-365.
195. C. Monticelli, G. Brunoro, F. Zucchi and F. Fagioli (1989) Inhibition of localized attack on the aluminium alloys AA6351 in glycol/water solutions. Werkstoffe und Korrosion vol. 40 393-398.
196. W.J. Ellis (1970) Fundamentals of cathodic protection. NACE, Houston, Fourth Western States Corrosion Seminar 6/1-6/10.
197. A.B. McKee and R.H. Brown (1947) Resistance of aluminium to corrosion in solutions containing various anions and cathions. Corrosion vol. 3 595-612.
198. J. Patrie (1952) Les phénomènes de passivation de l'aluminium immergé en milieu nitrique. Revue de l'Aluminium vol. 194 96. see also
199. J. Patrie (1952) Les phénomènes de passivation de l'aluminium immergé en milieu nitrique. Revue de l'Aluminium vol. 195 5-11.
200. J. Patrie (1952) Les phénomènes de passivation de l'aluminium immergé en milieu nitrique. Revue de l'Aluminium vol. 196 45-54.
201. J. Patrie (1952) Les phénomènes de passivation de l'aluminium immergé en milieu nitrique. Revue de l'Aluminium vol. 197 87-96.
202. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 183-186. see also
203. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 207-212.
204. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 227-230.
205. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 247-251.
206. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 263-266.
207. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 288-289.
208. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 303-305.
209. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 331-332.
210. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 346-350.
211. M. Whitaker (1952) A review of information on the effect of impurities on the corrosion resistance of aluminium. Metal Industry vol. 80 387-388.
212. K. Nisancioglu and R. Tusvik (1988) Corrosion of Stripo-cast aluminium alloys. Aluminium vol. 64 407-410.
213. Principes à observer en vue d'améliorer les conditions de résistance à la corrosion de l'aluminium. Revue de l'Aluminium vol. 77 36-37.
214. O. Lunder and K. Nisancioglu (1988) The effect of alkaline-etch pretreatment on the pitting corrosion of wrought aluminium. Corrosion vol. 44 414-422.
215. R.V. Blewett and E.W. Skerrey (1965) The performance of aluminium welds in corrosive environments. Metallurgia vol. 71 73-81.
216. R.B. Mears and R.H. Brown (1948) Designing to prevent corrosion. Corrosion vol. 3 97-118.
217. R.W. Elkington (1986) Design considerations for minimizing the corrosion of aluminium alloys. Aluminium Industry vol. 5 19-30.
218. I.L. Rozenfeld (1974) Crevice Corrosion of metals and alloys Houston: NACE 373-398.
219. J.J. Bowman (1946) Aluminium-base die-casting alloys. ASTM Proceeding vol. 46 225-232.
220. J.L. Everhart (1958) Aluminium alloys casting. Materials in Design Engineering vol. 47 125-144.
221. M.O. Speidel (1975) Stress-corrosion cracking of cast aluminium alloys. NATO 97-115. Advanced study Institute on stress-corrosion cracking, Denmark
222. Les alliages de fonderie inoxydables. Revue de l'Aluminium 882-893.
223. J. Wood and D.A. Harris (1981) Atmospheric corrosion tests on cast aluminium alloys. British Foundryman vol. 74 217-221.
224. R. Develay (1978) Importance de l'addition de manganèse dans l'aluminium et les alliages de l'aluminium. Revue de l'Aluminium 345-368.
225. E.C. Perryman and S.E. Haden (1950) Stress-corrosion of aluminium-7% magnesium alloy. Journal of the Institute of Metals vol. 77 207-235.
226. G.J. Metcalfe (1946) Intercristalline corrosion of aluminium-magnesium rivets. Journal of the Institute of Metals vol. 72 487-500.
227. A. Guilhaudis (september 1959) Influence de la teneur en magnésium sur la résistance à la corrosion sous tension des alliages Al−Mg. rapport Pechiney SREPC
228. E.H. Dix, W.A. Anderson and M.B. Shumaker (1958) Development of wrought Aluminium-Magnesium alloy. Alcoa, technical paper No. 14
229. A. Guilhaudis (1955) Traitements thermiques de stabilisation des alliages aluminium-magnésium à 5% contre les effets de chauffage à basse température. Revue de l'Aluminium vol. 223/224
230. E. Czyrca and H.P. Hack (November 1974) Corrosion of aluminium alloys in exfoliation resistant tempers exposed to marine environments for two years. Naval Ship Research and Development Center, report AD/A-002 234
231. C.L. Brooks (1970) Aluminium-Magnesium alloys 5086 and 5456 H116. Naval Engineers Journal 29-32.
232. H.S. Rawdon (1928) Corrosion embrittlement of duralumin. Practical aspects of problems. US National Advisory Commision of Aeronautics, technical note No. 285 1-11.
233. R.H. Brown, D. Sprowls and M.B. Shumaker (1969) Influence of stress and environment on the stress-corrosion cracking of high strength aluminium alloys. Conference AGARD Proceedings vol. 53 3.
234. R. Chevigny, R. Develay, A. Guilhaudis and J. Petrequin (1965) Les alliages aluminium-zinc-magnésium. Revue de l'Aluminium vol. 334 973-988.
235. M. Reboul and J. Bouvaist (1980) Étude du mécanisme de la corrosion feuilletante de l'alliage d'aluminium 7020. Revue de l'Aluminium 41-53.
236. D. Adenis and A. Guilhaudis (1967) Relation entre l'état structural et la sensibilité à la corrosion feuilletante de l'A-Z5G. Mémoires scientifiques de la Revue de Métallurgie vol. 64 877-889.
237. M. Baumgartner and H. Kaesche (1988) Intercristalline corrosion and stress-corrosion cracking of AlZnMg alloys. Corrosion vol. 44 231-239.
238. M. Reboul, B. Dubost and G. Trentelivres (september 1980) Corrosion sous contrainte des soudures de réservoirs en 7020 du lanceur Ariane. rapport Pechiney-CRV 1461
239. J.C. Greenbank, P. Andrews and S.S. Birley (June 1987) Prevention of exfoliation corrosion in welded AlZnMg structures by thermal sprayed metal coatings. Second Conference on Surface Engineering Stratford upon Avon
240. W. Hepples and N.J. Holroyd (1993) The corrosion protection of weldable 7XXX aluminium alloys by aluminium based arc sprayed coatings. Aluminium Industry vol. 12
241. J. Herenguel (1947) Examen de câbles conducteurs en Almelec et en aluminium-acier déposés après 15 à 25 ans de service. Revue de l'Aluminium 357-360.
242. W.H. Ailor (1978) ASTM Atmospheric corrosion testing: 1906 to 1976. ASTM, STP 646 129-151.
243. E. Wilson (1926) The corrosion products and mechanical properties of certain light aluminum alloys as affected by atmospheric exposure. Proceedings of the Physical Society of London vol. 30 15-25.
244. R.S. Sutton and R. Selligmann (1938) An aluminium statue of 1893: Gilbert's Eros. Journal of the Institute of Metals vol. 60 67-74.
245. W.H.J. Vernon (1923–1924) First experimental report to the atmospheric corrosion research comite. Transaction of the Faraday Society vol. 19 839-934.
246. J.C. Hudson (1930) The effects of two years' atmospheric exposure on the breaking load of hard drawn non-ferrous wires. Journal of the Institute of Metals vol. 44
247. I.L. Rozenfeld (1972) Atmospheric corrosion of metals. Houston: NACE English language edition translated by Tytell B.H.
248. T.E. Graedel (1989) Corrosion mechanisms for aluminium exposed to the atmosphere. Journal of the Electrochemical Society vol. 136 204c-212c.
249. G.V. Akimov (1945) Theory and methods of investigation of metals corrosion. lzdatel'stvo. A. N. URSS
250. Y.N. Mikhailovski (October 1980) Theoretical and engineering principles of atmospheric corrosion of metals. Conference Atmospheric Corrosion Hollywood
251. P.W. Brown and I.W. Masters (October 1980) Factors affecting the corrosion of metals in the atmosphere. Conference Atmospheric Corrosion Hollywood
252. N.D. Tomashov (1966) Theory of corrosion and protection of metals. New York: Mc Millan
253. W.K. Boyd and F.W. Fink (1974) Corrosion of metals in the atmosphere. Battelle, rapport AD-784-943
254. F.W. Lipfert (1987) Effects of acidic deposition on the atmospheric deterioration of materials. Materials Performance vol. 26 12-19.
255. P.M. Aziz and H.P. Godard (1959) Mechanism by which non-ferrous metals corrode in the atmosphere. Corrosion vol. 15 529t-533t.
256. Surveillance de la qualité de l'air en Île-de-France. Les résultats, Airparif
257. L. Hasenberg and Dechema (1991) Sulfur dioxyde Corrosion Handbook vol. 9
258. T. Sydberger and N.G. Vannerberg (1972) The influence of the relative humidity and corrosion products on the adsorption of sulfur dioxide on metal surfaces. Corrosion Science vol. 12 775.
259. G. Schikorr (1967) The sulfur dioxide repellent action of aluminum exposed to the influence of the atmospheres. Aluminium vol. 43 108-110.
260. I.S. Shklovskii (1951) Investigations of metals corrosion. Izdatel'stvo, A. N. URSS 241.
261. A.G. Akimov, I.L. Rozenfeld, et al. (1981) Phase composition and structure of films formed on aluminium by interaction with an atmosphere containing water vapor and nitrogen peroxyde. Zashchita Metallov vol. 17 80-83.
262. J.R. Duncan and J.A. Ballance (1986) Marine salt's contribution to atmospheric corrosion. ASTM, STP 965 316-326.
263. W.K. Boyd and F.W. Fink (August 1974) Corrosion of metals in the atmosphere. Battelle, rapport AD-784 943
264. Wheeler K.R., Johnson A.B., May R.P., Aluminium alloy performance in industrial air-cooled applications, ASTM, STP 767.
265. D. Knotkova, P. Boschek and K. Kreislova (1995) Results of ISO-CORRAG program: processing of one-year data in respect to corrosivity classification. ASTM, STP 1239 38-55.
266. L. Vrobel and D. Knotkova (1988) Using the classification of corrosivity of atmospheres to extend the service life of materials, structures and products. ASTM, STP 965 248-263.
267. S.W. Dean (1987) A new quantitative approach to classifying atmospheric corrosion: ISO breaks new ground. ASTM Standardization News 36-39.
268. V.E. Carter and H.S. Campbell (1968) The effect of initial weather conditions on the atmospheric corrosion of aluminium and its alloys. ASTM, STP 435 39-42.
269. S. Feliu and M. Morcillo (1987) Corrosion in rural atmosphere in Spain. British Corrosion Journal vol. 22 99-102.
270. T.F. Otero, A. Porro and A.S. Elola (1992) Predicting of pitting probability on 1050 aluminium in environmental conditions. Corrosion vol. 48 785-791.
271. G. Haynes and R. Baboian (1988) Atmospheric corrosion behavior of clad metal. ASTM, STP 965 145-190.
272. H.P. Godard (1963) Galvanic corrosion behavior of aluminium. Materials Protection vol. 2 38-47.
273. K.G. Compton, A. Mendizza and W.W. Bradley (1955) Atmospheric galvanic couple corrosion. Corrosion vol. 11 383t-392t.
274. J.C.W. Hinchiffle (1972) Storage corrosion of aluminium and its effects on finishing process. Australian Corrosion Engineering 7-15.
275. J. Langewerger (1981) Schwitzwasserkorrosion bei Lagerung und Transport von Properzi-Giesswalzdraht. Revue suisse de l'aluminium vol. 31 162-165.
276. E.W. Skerrey (October 1980) Long term atmospheric performance of aluminium and aluminium alloys. Conference Atmospheric Corrosion Hollywood 329-352.
277. A. Guilhaudis (1952) La tenue des alliages légers à la corrosion marine. Revue de l'Aluminium 186-188.
278. A. Guilhaudis (1963) Quelques aspects de la résistance des alliages d'aluminium en milieu marin. Corrosion et Anticorrosion vol. 11 404-419.
279. C. Panseri (1983) Examination of a sheet of aluminium exposed for 40 years in an urban atmosphere. Journal of the Institute of Metals vol. 63 15-20.
280. C. Panseri and A. Gragnani (1954) Sul comportemento dell'alluminio esposto per alcuni decenni in atmosfera urbana. Alluminio vol. 23 627-637.
281. C.J. Walton, D.O. Sprowls and J.A. Nock (1953) Resistance of aluminum alloys to weathering. Corrosion vol. 9 345-358.
282. G. Sowinsky and D.O. Sprowls (October 1980) Weathering of aluminum alloys. Conference Atmospheric Corrosion Hollywood
283. F.L. McGeary, E.T. Englehart and P.J. Ging (1967) Weathering of aluminium. Materials Protection vol. 6 33-38.
284. K. Barton (1976) Protection against atmospheric corrosion. Theories and methods. New York: Wiley 59.
285. M. Reboul and J. Forestier (13 August 1992) Sensibilité à la corrosion atmosphérique d'alliages d'aluminium sans cuivre. rapport Pechiney CRV 2581
286. L. Atteraas and S. Haagenlud (October 1980) Atmospheric corrosion testing in Norway. Conference Atmospheric Corrosion Hollywood 873-891.
287. M. Lashermes, A. Guilhaudis, M. Reboul and G. Trentelivres (October 1980) Thirty year atmospheric corrosion of aluminum alloys in France. Conference Atmospheric Corrosion Hollywood 353-364.
288. M. Lasehermes (1982) Tenue des alliages d'aluminium en atmosphères marine. Revue de l'Aluminium 505-511.
289. J.J. Bowman (1946) Aluminum-base die-casting alloys. ASTM Proceeding vol. 46 225-232.
290. J. Wood and D.A. Harris (1981) Atmospheric corrosion tests on cast aluminum alloys. British Foundryman 217-221.
291. J.F. Paulet, R. Fuchs and V. Gillich (1994) Le phénomène d'iridescence sur les surfaces en aluminium anodisé et coloré. Alusuisse Lonza, note FWEO
292. R.C. Furneaux, W.R. Rigby and B.G. Carter (1984) Mechanism of short-term superficial weathering of anodized aluminum. Conference Interfinish Jerusalem
293. J. Patrie (1975) Outdoor corrosion performance of anodized and electrolytically coloured aluminium for architectural use. Transactions of the Institute of Metals Finishing vol. 53 28-32.
294. D. Llowarch and B.V. Croker (1963) Exposure tests on anodized and sealed aluminium specimens. Corrosion Science vol. 3 181-184.
295. A. Guilhaudis (1965) Comportement de l'aluminium anodisé en atmosphère marine. Conférence du Centre de recherches et d'études, océanographiques La Rochelle 333-345.
296. QUALANOD EURAS EWAA (European Association Anodisers Association) Zurich, BP 10 CH 8027.
297. J. Patrie (1972) Les méthodes de contrôle applicables à l'aluminium anodisé en architecture. Revue de l'Aluminium 869-877.
298. A. Prati (juin 1963) Définition d'une méthode d'essai de corrosion accélérée pour le contrôle des couches d'oxydation anodique. 3 e Congrès de la Fédération européenne de la corrosion Bruxelles
299. P.G. Sheasby (1983) The properties of anodic oxidation coatings on aluminium. Aluminium Industry vol. 2 9-15.
300. H. Campbell (June 1987) CIDA. Anodized aluminum, atmospheric exposure tests. Euston 20 years. Birmingham B15 1 TW: Aluminium Federation Ltd report HC 8509/1
301. G. Sowinsky and D.O. Sprowls (October 1980) Weathering of aluminum alloys. Conference Atmospheric Corrosion 21 297-328. Hollywood
302. G. Oelsner (1978) Results of natural, long time weathering of anodized aluminium. Aluminium vol. 54 530-531.
303. P.G. Sheasby (mars 1990) The weathering of anodized aluminium. Conférence Aluminium 2000 Modena
304. F.E. Faller and W. Sautter (1983) Changes in film thickness of anodized aluminium parts in outdoor exposure. Aluminium vol. 59 E8-E13.
305. P. J. Patrie (1976) La normalisation des demi-produits en alliages légers anodisés destinés au bâtiment. Courrier de la normalisation vol. 247 53-57.
306. Anodisation de l'aluminium et de ses alliages. Couches anodiques sur aluminium, Spécifications générales. norme AFNOR NF A 91-450
307. Menuiserie métallique. Fenêtres, façades rideaux, semi-rideaux, panneaux à ossature métallique. Protection contre la corrosion et préservation des états de surface. norme AFNOR NF P 24-351
308. J. Patrie (1975) Tenue à l'atmosphère industrielle et marine des demi-produits anodizes et colorés électrolytiquement destinés au bâtiment. Revue de l'Aluminium
309. R. Seligman and P. Williams (1920) The action of aluminium of hard industrial waters. Journal of the Institute of Metals vol. 23 159-184.
310. E.W. Jakson (1957) Aluminium vs corrosion by water. Chemical & Process Engineering vol. 38 391-393.
311. Mémento technique de l'eau 9th edition Paris: Degrémont
312. S.C. Britton and U.R. Evans (1930) Journal of the Chemical Society 1773.
313. M.A. Heine, D.S. Keir and M.J. Pryor (1965) The specific effects of chloride and sulfate ions on oxide covered aluminium. Journal of the Electrochemical Society Vol. 112 24-32.
314. H.P. Godard (1960) The corrosion behavior of aluminium in natural waters. The Canadian Journal of Chemical Engineering vol. 38 167-173.
315. C. Groot and V.H. Troutner (June 1956) Corrosion of aluminium in tap water. USAEC, report HW 43 085
316. D.W. Sawyer and R.H. Brown (1947) Resistance of aluminium to fresh water. Corrosion vol. 3 443-457.
317. J. Czochralski (1920) Blackening of aluminium cooking dishes. Z. Metallkunde vol. 12 430-443.
318. D. Altenpohl (1955) Einiges zur sog. Brunnenwasserschwärzung des Aluminiums und ihrer Verhütung. Metalloberfläche vol. 9 118-121.
319. R. Bourbon, D. Adenis and J. Moriceau (avril 1966) Relation entre le noircissement à l'eau des alliages d'aluminium et la structure des couches d'alumine. Tapport Pechiney CRV
320. M. Reboul (1976) Évolution de l'aspect de surface de l'aluminium brut de transformation en miliex naturels. Revue de l'Aluminium 485-491.
321. H.P. Godard, W.B. Jepson, M.R. Rothwell and R.L. Kan (1967) The corrosion of light metals. New York: Wiley 208.
322. S.C. Britton and U.R. Evans (1930) Journal of the Chemical Society 1773.
323. C.M. Dacres (1977) An investigation of the influence of various environmental factors upon the aqueous corrosion of aluminum alloys. PhD. Washington DC: American University
324. H.P. Godard and E.G. Torrible (1970) The effects of chloride and sulfate ions on oxide films growth on aluminium immersed in aqueous solutions at 25°C. Corrosion Science vol. 10 135-142.
325. W.A. Bell (1962) Effect of calcium carbonate on corrosion of aluminium in waters containing chloride and copper. Journal of Applied Chemistry vol. 12 53-55.
326. D.P. Doyle and H.P. Godard (1962) Influence of additions to water on the corrosion behavior of aluminium. Oil in Canada vol. 14 42-44.
327. G.G. Arnold (1972) The effect of swimming pool atmospheres on aluminium. Anti-Corrosion Materials & Methods vol. 19 5-9.
328. F.C. Porter and S.E. Hadden (February 1952) Effect of water temperature and copper content on the pitting of aluminium. BNFRMA, rapport RRA
329. D. Davies (1959) Pitting of aluminium in synthetic waters. Journal of Applied Chemistry vol. 9 651-659.
330. L. Bazzi, S. Kertit and M. Hamdani (décembre, 1994) Effet de l'addition d'ions Cu 2+ sur le comportement à la corrosion de l'alliage de l'aluminium 6063 en milieu neutre. Revue de métallur-gie-CIT/Science et génie des matériaux 1835-1843.
331. J.M. Bryan (1950) Action of boiling distilled water on aluminium. Journal of Society Chemical Industry vol. 69 169-173.
332. V.H. Troutner (1959) The mechanism and kinetics of aqueous aluminium corrosion. I. Role of corrosion product film in the uniform aqueous corrosion of aluminium. Corrosion vol. 15 9t-12t.
333. V.H. Troutner (1959) Observations on the mechanism and kinetics of aqueous aluminium corrosion. II. Kinetics of aqueous aluminium corrosion. Corrosion vol. 15 13t-16t.
334. H. Coriou, L. Grall, J. Huré, P. Lelong and J. Herenguel (1956) Corrosion de l'aluminium et de certains alliages dans l'eau à haute température. Revue de Métallurgie vol. 53 775-790.
335. L. Guillet and M. Ballay (1929) La corrosion des alliages d'aluminium dans la vapeur d'eau surchauffée. Comptes rendus, Académie des sciences vol. 189 551-552.
336. J. Herenguel and P. Lelong (1958) Les mécanismes d'attaque de l'aluminium de haute pureté par l'eau à température élevée. Revue de l'Aluminium vol. 35 991-998.
337. K.M. Karlsen (1957) Mechanism of aqueous corrosion of aluminium at 100°C. Journal of the Electrochemical Society vol. 104 147-154.
338. H. Coriou, L. Grall, A. Hauptman and J. Huré (1958) Influence du silicium sur la résistance d'alliages aluminum-fer à la corrosion par l'eau à haute temperature. Revue de Métallurgie vol. 55 968-975.
339. K. Videm (1959) Corrosion of aluminium alloys in high-temperature water. A survey. Journal of Nuclear Materials vol. 1 145-153.
340. R.L. Dillon (1957) Observations on the mechanisms and kinetics of aqueous aluminium corrosion. Part II. Kinetics of aqueous aluminium corrosion. Corrosion vol. 13 13t-16t.
341. N. Hackerman (1952) Effect of temperature on corrosion of metal by water. Industrial and Engineering Chemistry vol. 44 1752-1755.
342. J.M. Bryan (1948) The mechanism of the corrosion of aluminium. Chemistry & Industry 135-136.
343. T.E. Wright and H.P. Godard (1954) Laboratory studies on the pitting of aluminium in aggressive waters. Corrosion vol. 10 195-198.
344. E.W. Jakson (1957) Aluminium vs corrosion by water. Chemical & Process Engineering vol. 38 391-393.
345. F.C. Porter and S.E. Hadden (1953) Corrosion of aluminium alloys in supply waters. Journal of Applied Chemicals vol. 3 385-409.
346. B.R. Pathak and H.P. Godard (1968) Equation for predicting the corrosivity of natural fresh waters to aluminium. Nature vol. 218 893-894.
347. T. Sakaida, H. Ikeda and Z.I. Tanabe (1985) Estimation of corrosion rate of aluminium in tap water. Sumitomo Light Metal, technical report 26 221-229.
348. H.P. Godard (1963) Aluminium pipeline case history data. Materials Protection vol. 2 101-104.
349. W.H. Ailor and J.R. William (1969) A review of aluminium corrosion in tap water. Journal of Hydronautics vol. 3 105-114.
350. M. Grimal (1951) Le radiateur en aluminium. Revue de l'Aluminium vol. 180 341-344.
351. C. Vargel (janvier 1979) Tenue à la corrosion des radiateurs Altrois P. rapport Pechiney CRV
352. C. Isenberg (1978) Korrosionverhalten stranggeprebter Radiatorprofile aus AlMgSi 0.5 in geschlossenen Warmwasserheizkreisen. Aluminium vol. 54 270-273.
353. M. Lashermes (juin 1983) Essais de radiateurs en profilés. rapport Pechiney CRV
354. T.B. Jannemaan (1987) Condensing boilers in the Federal Republic of Germany. Corrosion behavior and performance data. Proceedings of the 1987 International Symposium on Condensing Heat Exchangers Ohio 17-33.
355. A.G. Kobussen, A. Oonk and R.J. Hermkens (1987) Corrosion of condensing heat exchangers and influence of the environment. Proceedings of the 1987 International Symposium on Condensing Heat Exchangers Ohio 1-16.
356. M. Searle (1987) The design and installation of domestic condensing boilers in the UK. Proceedings of the 1987 International Symposium on Condensing Heat Exchangers Ohio 75-93.
357. C. Vargel and P. Solar (octobre 1975) Radiateurs de chauffage central. rapport Pechiney CRV 1048
358. Les portes des écluses de Gand. Revue de l'Aluminium vol. 248 1124-1125.
359. W.W. Binger and C.M. Marstiller (1957) Aluminium alloys for handling high purity water. Corrosion vol. 13 591t-596t.
360. J.H. Hensler (1963) Corrosion of wrought aluminium in demineralized water. Australasian Corrosion Engineering vol. 7 23-28.
361. J. Larsen-Basse (1984) Corrosion tests in Hawaiian geothermal fluids. Proceeding International Congress Metal Corrosion 641-648.
362. W.H. Ailor (1974) Metals in wastewater treatment. Journal of Environmental Engineering Division 295-309.
363. M. Siegrist (1972) L'aluminium dans les stations d'épuration des eaux usées. Revue suisse de l'aluminium 227-233.
364. Aluminum, the modern material for sewage treatment equipment and plants Aluminium Association
365. J.C. McGuire (1895) Aluminum: its alloys and their use in ship construction. The Aluminum World vol. 2 49-56.
366. C. Renié and D. Charles (1990) Le métal de l'Ange. Voiles et Voiliers vol. 229 70-75.
367. R. Guérin (1926) Les possibilités d'application de l'aluminium et de ses alliages dans la marine. Revue de l'Aluminum vol. 12 204-209.
368. R.P. Hobson (1897) Notes on the yacht Defender and the use of aluminium in marine construction. US Naval Institute Proceedings vol. 23 523-562.
369. R.A. Sielski (May, 1987) The history of aluminium as a deckhouse material. Naval Engineers Journal vol. 165-172.
370. R.B. Mears and R.H. Brown (1944) Resistance of aluminium-base alloys to marine exposures. Transactions of the Society of Naval Architects Engineerws vol. 52 91-113.
371. W.K. Boyd and F.W. Fink (March 1978) Corrosion of metals in marine environments. Battelle report MCIC-78-37
372. J. Lyman and R.B. Abel (1958) Chemicals aspects of physical oceanography. Journal of Chemical Education vol. 35 113-115.
373. W. Huppatz and H. Meissner (1987) Effect of the temperature and salt content of sea water on the corrosion behavior of aluminium. Werkstoffe und Korrosion vol. 38 709-710.
374. F.W. Fink (December 1960) Corrosion of metals in sea water. OSW, report No. 46
375. C. Vargel (13 juillet 1972) Utilisation de l'aluminium dans les installations de dessalement par flash distillation. Examen après 16400 heures d'essai. rapport Pechiney CRV 678
376. F.M. Reinhart (December 1966) Corrosion of materials in hydrospace. US Naval Civil Engineering Laboratory, report R504
377. G.A. Gehring and M.H. Peterson (1981) Corrosion of 5456 H117 aluminium in high velocity sea water. Corrosion vol. 37 232-242.
378. F.M. Reinhart (January 1969) Corrosion of materials in hydrospace V. Aluminium alloys. US Naval Civil Engineering Laboratory, report AD-683334
379. W.H. Ailor (1967) Evaluation of aluminium panels exposed in the Pacific Ocean at 2 340 feet for six months. Metallurgia vol. 75 99-108.
380. I.B. Ulanovskii (1979) Corrosion of metals in the Atlantic Ocean. Zashchita Metallov vol. 15 697-700.
381. S.S. Sawant and A. Wagh A.b. (1990) Corrosion behavior of metals and alloys in the waters of the Arabian Sea. Corrosion Prevention & Control vol. 37 154-157.
382. C.L. Brooks (1965) Aluminium alloys for pressure hulls. Metals Engineering Quarterly ASM 19-22.
383. F.M. Reinhart and J.F. Jenkins (April 1972) Corrosion of alloys in hydrospace. 189 days at 5900 feet. US Naval Civil Engineering Laboratory, technical note N-1224
384. R.H. Wagner and R.A. Bonewitz (April 1978) Catalog information on the performance of aluminium in sea water. Alcoa, report NXS-3
385. M. Schumacher (1979) Seawater corrosion Handbook New Jersey: Noyes Data Corporation
386. C.R. Southwell, A.L. Alexander and C.W. Humer (1965) Corrosion of metals in tropical environments. Aluminium and Magnesium. Materials Protection vol. 4 30.
387. C. Vargel (1986) L'aluminium et la mer. Matériaux et Techniques vol. juin 233-244.
388. The application of aluminium alloys to marine uses London: Aluminium Development Association
389. La marine (1954) Revue de l'Aluminium vol. 211 220-226.
390. Les nouveaux paquebots italiens. Revue de l'Aluminium vol. 212 235-238.
391. First Stena HSS 1500 delivered by Finnyards. Fast Ferry International 15-24.
392. C. Vargel (18–19 mars 1996) Les navires à grande vitesse. Le choix des alliages d'aluminium. Colloque SFM Sollac, Fos-sur-Mer
393. Corrosion test of aluminium alloys for water gate construction. Journal JLMA 1-31.
394. The corrosion resistance of aluminum alloys in sea water. Alluminio vol. 41 107-108.
395. C. Vargel and M. Mirabel (septembre 1973) Emploi de l'aluminium dans les installations de dessalement par distillation. 4th International Symposium on Fresh Water from the Sea Heidelberg 295-306.
396. J.N. Wanklyn and N.J. Wilkins (septembre 1970) The corrosion of aluminium alloys in hot brine. 3rd International Symposium on Fresh Water from the sea Dubrovnik 617-629.
397. J. Larsen-Basse (1984) Corrosion of aluminium alloys in ocean thermal energy conversion seawaters. Materials Performance vol. 23 16-21.
398. S.C. Dexter (1981) Localized corrosion of aluminium alloys for OTEC heat exchangers. Oceano Science and Engineering vol. 6 109-148.
399. R.O. Lewis (1982) Influence of biofouling countermeasures on corrosion of heat exchangers materials in sea water. Materials Performance vol. 21 31-38.
400. R.A. Bonewitz (1978) The performance of aluminium alloys in ammonia-sea water solutions. Conference OTEC 5 Washington
401. F.W. Fink and E.L. White (1961) Corrosion effects of liquid fluoriner and liquid oxygen on materials of construction. Corrosion vol. 17 58t/60t.
402. V.P. Schaläper, H. Gäummann and A. Bukoweicki (1949) Untersuchungen über Korrosionsangriffe in Kohlendioxyd-Druckgefässen aus Aluminiumlegierungen. Schweiz. Arch. Angew vol. 15 316/324.
403. Anonyme (1985) Corrosion data survey, Section 1: Main tables. NACE Engineers 124.
404. Anonyme (1985) Corrosion data survey, Section 1: Main tables. NACE Engineers 167.
405. J. Bollinger (1952) Über die Korrosion verschiedener Metalle in verflüsigtem Schwefedioxyd. Schweizer Archiv vol. 10 321.
406. A.M. Shukotin, N.Y. Lantratova and V.A. Gerasimova (1968) Corrosion resistance of metallic meterials in nitrogen oxides at high temperature and pressures. Document ORNL-TR-2539 Translated from Russian
407. P.G. Waldrep and D.M. Trayer (1968) Nitrogen tetroxide corroxion studies of cryopanel materials for space chamber propulsion testing. Rapport AEDC TR-68-138
408. H. Tatu (1933) Le blanchiment à l'eau oxygénée. Revue de l'Aluminim (no. 55), 2077-2089.
409. C.W. Alley, A.W. Hayford and H.F. Scott (1960) Nitrogen tetroxyde corrosion studies. P. B. Report 171 301 U.S. Department of Commerce
410. H.U.V. Vogel (1938) Vergleichende untersuchung über das Korrosionverhalten von Al 99, 99 und 99, 99 plattierten Blechen mit der normalen Leichtmetall, Werkstoffen des chemischen Apparatebaues. Aluminium vol. 20 85/94.
411. W. Wiederholt (1932) Das Verhalten von Aluminium und Aluminiumlegierungen in Wasserstoffsuperoxydlösungen. Korrosion Metallschutz vol. 8 4/15.
412. Voir par exemple le brevet U.S. 2 948 392 aug 1960, Aluminum treatment for resistance to hydrogen peroxyde. J. H. Young.
413. Réservoir de stockage d'hydrogène liquide. Revue de l'Aluminium (no. 290), 1048.
414. Réservoir de stockage d'hydrogène liquide. Revue de l'Aluminium (295), 199.
415. Réservoir de stockage d'hydrogène liquide. Revue de l'Aluminium (no. 302), 1132-1133.
416. Réservoir de stockage d'hydrogène liquide. Revue de l'Aluminium (no. 312), 874.
417. K. Smrcek, I. Sekerka and V. Seifert (1958) Corrosion resistance of aluminium materials to aqueous hydrogen sulfides solutions. Chem. Prumsyl vol. 8 297-301.
418. R.C. Cronau and B.E. Wilde (1980) Procedures for minimizing corrosion in coal-chemical processing facilities. Materials Performance vol. 19 9.
419. R. Demeulenaere (1976) Tenue d'alliages d'aluminium dans un milieu d'eaux résiduaires chargées en H2S et NH3. Matériaux et Techniques 233-234.
420. L.L. Constantino, J.R. Denson, C.S. Krishnan and A. Toy (May 1974) Compatibility testing of space-craft materials and space-storable liquid propellents. TRW Systems Group, report 23162-6023-RV00
421. F.W. Fink and E.L. White (1961) Corrosion effects of liquid fluorine and liquid on materials of construction. Corrosion vol. 17 58t-60t.
422. K. Hauffe (1989) Corrosion Handbook, Fluorine, hydrogen fluoride, hydrofluoric acide Vol. 1 Dechema 106.
423. N.A. Tiner (1967) Corrosion of metals by flowing liquid fluorine compounds. Advance Cryogenic Engineering vol. 12 771-779.
424. J.C. Grigger and H.C. Miller (1964) Effect of chlorine trifluoride and perchloride on construction materials. Materials Protection vol. 3 53-58.
425. W.E. Hensley and R.J. Walter (1970) Compatibility of materials with chlorine pentafluoride. Journal of Spacecraft Rockets vol. 7 174-180.
426. B. Chatterjee and R.W. Thomas (1976) The chemical etching of aluminium in caustic soda solutions. Transactions of the Institute of Metal Finishing vol. 54 17.
427. J.N. Gregory, N. Hodge and J.V.J. Iredale (1956) The static corrosion of nickel and other materials in molten caustic soda. England: Atomic Energy Research Establishment Harwell
428. B.F. Dmitruk, O.G. Zarutbitskii and N.N. Babich (1983) Kinetics of aluminum corrosion in a hydrated alkaline melt. Ukraine Khim. Zh vol. 49 690-693.
429. K. John (1988) Corrosion Handbook vol. 3 Dechema 221.
430. G.H. Bailey (1920) Rate of corrosion of aluminium. Ind. Soc. Chem. Ind. vol. 39 118.
431. Y. Takatani, K. Yamakawa and S. Yoshizawa (1983) Corrosion behavior of aluminum alloys in saturated calcium hydroxide solution. Journal of the Society Material Science, Japan vol. 32 1218-1222.
432. K.L. Tsejtlin, Y.I. Sorokin Yu.I., A.A. Balashova, S.M. Babitzkaya, Y.S. Levin Ya.S., A.T. Konyuschenko, R.V. Golovkin and B.S. Ladyzhenski (1970) High temperature corrosion of metals in gaseous ammonia. Zashchita Metallov vol. 6 451-454.
433. D.B. Bird and R.W. Flournoy (1964) Refinery experience and testing of aluminum condenser tubes. Materials Protection vol. 3 56.
434. G.A. Nelson (1971) Corrosion data survey-Table A-6. 2nd edition Houston: NACE
435. D.F. Wilson, M. Howell and J.H. DeVan (1992) Materials corrosion in ammonia/solid heat pump working media. ORNL, report TM-12004
436. D.A. Jones and B.E. Wilde (1977) Corrosion performance of some metals and alloys in liquid ammonia. Corrosion vol. 33 46-50.
437. R. Blenkin and J.K. Werdale (1963) Storage vessels, Design, fabrication and use. Chemical Process & Engineering vol. 44 344.
438. H. Röhrig and J. Roch (1939) Über die Einwirkung kalter wässriger Ammoniaklösungen auf Aluminiumblech normaler und höherer Reinheit. Aluminium vol. 21 128.
439. P.G. Waldrep and D.M. Trayer (December 1968) Effects of monoethylenehydrazine on cryopanel materials for space simulation chamber propulsion test. AEDC, report TR-68-194
440. Van der Wall E.M., Suder J.K., Beegle R.L., Cabeal J.A. Propellant/Material compatibility study, AFRPL, report TR-71-741.
441. P. Gilbreath and M.J. Adamson (February 1974) The stress-corrosion susceptibility of several alloys in hydrazine fuels. NASA, report TN D-7604
442. H.U. Vogel (1938) Vergleichende Untersuchung über das Korrosionverhalten von Al 99, 99 und Al 99, 97 plattierten Blechen mit den normalen Leichmetall. Werkstoffen des chemischen Apparatebaues. Aluminium vol. 20 85-94.
443. A.B. McKee and R.H. Brown (1947) Resistance of aluminium to corrosion in solutions containing various anions and cathions. Corrosion vol. 3 595-612.
444. Chemische Beständigkeit von Aluminium gegenüber verschiedenen Stoffen. Werkstoffe und Korrosion vol. 14 913.
445. V.S. Zotikov and G.B. Bakhmutova (1974) Corrosion of aluminium and its alloys in hydrofluoric acid. Zaschita Metallov vol. 10 164-166.
446. E. Rabald (1968) 2nd revised edition Corrosion Guide Amsterdam: Elsevier
447. P. Junière and M. Sigwalt (1962) Les applications de l'aluminium dans les industries chimiques et alimentaires. Paris: Eyrolles
448. A.I. Zhurin, A.I. Kosmynin, O.I. Vlasenko and I. Vyssh (1973) Corrosion of aluminium cathodes during the electrodeposition of zinc. Ucheb. Zaved. Tsvet. Met. vol. 16 71-75.
449. K. Hauffe (1991) Corrosion Hanbook vol. 10 Dechema 117-129.
450. E.M. Horn, K. Schoeller and H. Dölling (1990) Zur Korrosion von Aluminium-Werkstoffen in Salpetersäure. Werkstoffe und Korrosion vol. 41 308.
451. D.D. Singh, R.S. Chaudarry and C.V. Agarwall (1982) Corrosion characteristics of some aluminium alloys in nitric acid. Jounal of the Electrochemical Society vol. 129 1869.
452. E.K. Malakhova and R.G. Zinchenko (1980) Crevice corrosion of aluminium in strong nitric acid. Khim Prom 358.
453. D.M. Mason and J.B. Rittenhouse (1958) Mechanism of inhibiting effect of hydrofluoric acid in fuming nitric acid on liquid phase corrosion of aluminium and steel alloys. Corrosion vol. 14 345t-347t.
454. E. Rabald (1951) Ullmanns Encyclopädie der technischen Chemie. 3e édition München: Urban & Schwarzenberg
455. C.P. Dillon (1956) Corrosion of type 347 stainless steel and 1100 aluminium in strong and mixed nitric sulfuric acid. Corrosion vol. 12 623t-626t.
456. R. Chevillotte (1954) Les emplois de l'aluminium dans l'industrie de l'acide nitrique. Revue de l'Aluminium vol. 88 314-318.
457. P. Junière (1937) Les réservoirs de Bergerac. Revue de l'Aluminium vol. 214 559-566.
458. J.L. Everhart (1958) Aluminium alloys casting. Materials Engineering vol. 47 125.
459. L.V. Zhuravleva and V.P. Rubrenov (1970) Aluminium alloys for nitric acid citerns. Zaschita Metallov 224.
460. E.M. Horn and H.W. Diekmann (1990) Corrosion of aluminium and aluminum alloys in nitric acid. ASTM, STP 1134 60-69.
461. C. Vargel (1973) Tenue à 50°C de l'A8 et de l'A-M1G plaqué A8 soudés dans l'acide nitrique concentré à 99%. rapport Pechiney CRV 796.
462. P.R. Kosting and C. Heins (1931) Corrosion of metals by phosphoric acid. Industrial and Engineering Chemistry vol. 23 140-150.
463. F.F. Berg (1969) 2e édition Korrosionsschaubilder GmBH Dusseldorf: VD-Verlag
464. Werkstofftabelle: Phosphorsäure Frankfurt am Main: Dechema
465. V.S. Zotikov and E.Y. Semenyuk (1971) Corrosion of metals in ammonium fluoride solutions. Tr Gos. In-Ta Prikl. Khim. vol. 67 199.
466. I. Kawakatsu and T. Osawa (1977) Erosion of aluminium based alloys by molten brazing flux. Journal of Japan Institute of Metals vol. 37 435.
467. J. Herenguel, M. Scheidecker, P. Lelong, R. Biais, R. Boghen and D. Whitwham (1995) Aluminium et magnésium en énergie nucléaire. Revue de l'Aluminium no. 334 989-997.
468. J.M. Saninger, F. Alba, S.J. Garrido and E. Avendano (1990) The kinetics of aluminium-7075 corrosion by uranium hexafluoride. Corrosion Science vol. 30 903-913.
469. R. Chevillotte (1937) L'aluminium dans l'industrie du sel. Revue de l'Aluminium no. 94 849-852.
470. P. Bandet (1958) Les wagons Pechiney pour le transport du sel. Revue de l'Aluminium no. 251 189-192.
471. L. Hasenberg (1990) Potassium Chloride. Corrosion Handbook vol. 7 Dechema
472. E. Rabald (1968) 2nd edition Corrosion Guide Amsterdam: Elsevier 84.
473. H.K. Kohl (1979) The corrosion of steel and aluminium in calcium chloride, ammonia, magnesium chloride-methylamine and magnesium chloride-methylaminedecane. Werkstoffe und Korrosion vol. 30 171.
474. H.U.V. Vogel (1940) Korrosionsverhalten von Aluminium und Aluminiumlegierungen gegen wäßrige Lösungen verschiedener Temperaturen. Korrosion und Metallschutz vol. 16 259-278.
475. K. John (1988) Bromides. Corrosion Handbook vol. 3 Dechema
476. H. Bohner H. von (1933) Übersicht über das Verhalten des Aluminiums und seiner Legierungen gegenüber Stoffen der chemischen und der Nahrungsmittel-Industrie. Korrosion und Metallschutz vol. 9 86-92. see also
477. H. Bohner H. von (1933) Übersicht über das Verhalten des Aluminiums und seiner Legierungen gegenüber Stoffen der chemischen und der Nahrungsmittel-Industrie. Korrosion und Metallschutz vol. 9 113-122.
478. A.P. Brown and J.E. Battles (1987) The corrosion of metals and alloys by sodium polysulfides melts at 350°C. Proceedings of the Electrochemical Society 237-246.
479. R.L. Horst and W.W. Binger (1961) Corrosion studies of aluminium in chemical process operations. Corrosion vol. 17 25t-30t.
480. Un réservoir de nitrate d'ammonium de 8000 mètres cubes. Revue de l'Aluminium, no. 232, mai 513.
481. P. Lesage and M. Goetz (1977) Bains de sels: bains de nitrites-nitrates et de nitrates-nitrites. Traitements thermiques vol. 114 29-36.
482. G.S. Cook and N. Dickinson (1950) Corrosion of metals by insecticidal solutions. Corrosion vol. 6
483. R. Gadeau (1962) Les alliages d'aluminium en cryogénie. Revue de l'Aluminium no 304 1355-1368.
484. A. Tournon (1965) Arzew, usine de liquéfaction du gaz d'Hassi R'Mel, 850 tonnes d'aluminium. Revue de l'Aluminium nos 329 327-340.
485. H. Lichtenberg (1938) Behavior of light metal alloys toward moist acetylene. Aluminium vol. 20 465-466.
486. K. Hauffe (1990) Benzene and benzene homologous. Corrosion Handbook vol. 6 Dechema
487. P. Wagner (1928) Aluminum stock tanks compared with steel in corrosion tests. National Petroleum News vol. 20 50.
488. S. Gill (1929) Aluminum foil tank coatings resist corrosion and reduce evaporation. National Petroleum News vol. 21 42-47.
489. J.F. Lancaster (1978) Materials for the petrochemical industry. International Metals Review vol. 23 101-149.
490. J.F. Whiting and T.E. Wright (1962) Tests to five years indicate aluminium alloys pipe gives economical service. Materials Protection vol. 1 36-46.
491. A. Ellis (1952) Some corrosion experiences with aluminium crud-oil. Corrosion vol. 8 289-291.
492. D.Y. Gastoué (1957) L'aluminium dans l'industrie du pétrole. Revue de l'Aluminium no 243 531-534.
493. M. Frossard and J.-P. Lamotte (1964) Les tiges de forage en aluminium. Revenue de l'Aluminium no 320 554-558.
494. Les revêtements de réservoirs de pétrole. Revue de l'Aluminium No. 315 1243.
495. D.P. Cutler (1987) Reactions between halogenated hydrocarbons and metals. A literature review. Journal of Hazardous Materials vol. 17 99-108.
496. A.C. Hamstead, B.B. Elder and J.C. Canterbury (1957) Reaction of certain chlorinated hydrocarbons with aluminum. Corrosion vol. 14 189t-190t.
497. J.F. Spencer and M.L. Wallace (1909) Interaction of metals of the aluminium group and organic halogens derivatives. Journal of the Chemical Society vol. 93 1827.
498. V.C. Kyriasis and E. Heitz (1980) Zur Kinetik der Korrosion von Metallen in Halogenkohlenwasserstoffen. Werkstoffe und Korrosion vol. 31 197-207.
499. W.O. Walker and K.S. Wilson (1937) The action of methyl chloride on aluminium. Refrigeration Engineering vol. 34 89-90.
500. L.G. Borisova (1975) Stability and corrosion of dichloromethane. Materials Korrosion Svarka, Mashinostroeniya, Moscou 162-166.
501. M. Stern and H.H. Uhlig (1952) Effect of oxide films on the reaction of aluminium with carbon tetrachloride. Journal of Electrochemical Society vol. 99 389-392.
502. H.G. Spilker (1990) Chlorinated hydrocarbons, Chloroethanes. Corrosion Handbook vol. 12 Dechema
503. H. Dölling (1980) Corrosion tests on aluminium in halogenated hydrocarbons of practical importance. Werkstoffe and Korrosion vol. 312 173-178.
504. V.C. Kyriasis and E. Heitz (1980) Zur Kinetik der Korrosion von Metallen in Halogenkohlenwasserstoffen. Werkstoffe und Korrosion vol. 31 197.
505. K. Brookmann (1958) Untersuchungen über das Verhalten von Aluminium gegenüber organischen Lösungsmitteln. Aluminium vol. 34 30.
506. W. Dilla and H.J. Koser (1983) Ein Breitag zur Beurteilung der Stabilität chlorierter Kohlenwasserstoffe in der Leichtmetallentfettung. Chemiker Zeitung vol. 107 227.
507. V. Moroni, E. Macchi and G. Giglioli (1974) Investigation on thermal stability and corrosion effects of dichloro-difluoro-methane in view of its possible application as working fluid in a power plant. La Termotecnica vol. 28 209-221.
508. J.D. Minford (1964) Compatibility studies of aluminium with propellant and solvents for use in aerosol. Journal of the Society of Cosmetic Chemists vol. 15 311-326.
509. G. Helsner (1988) Acid Halides. Corrosion Handbook vol. 3 Dechema
510. R. Seligman and P. Williams (1918) The inhibitory effects of water on the interaction of aluminium and the fatty acids, phenol, cresol, alpha and beta naphtols, methyl, ethyl, butyl, amyl and benzyl alcohols. Journal of Society Chemical Industry vol. 37 159-165.
511. B.I. Zaritski, A.P. Kostyk and O.A. Tagaev (1986) Corrosion activity of methanol-water systems. Khim. Prom. 341.
512. H.G. Spilker (1991) Methanol. Corrosion Hanbook vol. 9 Dechema
513. L.E. Poteat (February 1978) Automotive materials compatibility with methanol fuels blends. Fourth International Symposium University of Miami 707.
514. L. Wing, G.L. Evarts and D.M. Tramontana (1992) Protect gasoline: methanol fuel systems. Materials Engineering vol. 109 26-27.
515. R.J. Lash (October 1993) The corrosion behavior of metals, plated metals, and metals coatings in methanol/gasoline fuel mixtures. Sixth Automotive Corrosion & Prevention Conference Deadborne (Etats-Unis) 153-171.
516. W.J. Rossiter, P.W. Brown and M. Godette (1983) The determination of acidic degradation products in aqueous glycol and propylene glycol. Solar Energy Materials vol. 9 267-279.
517. J.D. Jackson, P.D. Miller, F.W. Fink and W.K. Boyd (May 1965) Corrosion of materials by ethylene glycol-water. Battelle, Report DMIC 216
518. R.J. Agnew, J.K. Truitt and W.D. Robertson (1959) Corrosion behavior of metals in ethylene glycol solutions. Industry Engineering Chemical vol. 50 894.
519. J.F. Collins and C.E. Maducell (1977) Polyalkilene glycol quenching of aluminium alloys. Materials Performance vol. 16 20.
520. G. Elsner (1989) Polyols. Corrosion Handbook Dechema
521. H. Sigurdsson and R. Tsuvik (1986) Corrosion of aluminium in water-based heat exchangers systems. 10th Scandinavian Corrosion Congress 65-72.
522. P. Neufeld and A.K. Chakrabarty (1972) The corrosion of aluminum and its alloys in anhydrous phenol. Corrosion Science vol. 12 517-525.
523. K.G. Strömmen (1974) Wagons-citernes à quatre essieux en aluminium pour le transport du phénol. Revue Suisse de l'aluminium 120-121.
524. Amine und Aminierung Dechema Werkstofftabelle
525. A. Buckowiecki (1959) Untersuchungen über das Korrosionsverhalten von Aluminium und Aluminiumlegierungen gegenüber organischen und anorganischen Basen. Werkstoffe und Korrosion vol. 10 91-105.
526. F.C. Riesenfeld and C.I. Hughes (1951) Corrosion in amine gas-treating plants. Petroleum Refiner vol. 30 97-106.
527. F.C. Riesenfeld and C.L. Blohm (1951) Corrosion resistance of alloys in amine gas-treating systems. Petroleum Refiner vol. 30 107-115.
528. Rozenboim G.B., Osipov V.N. Corrosion of aluminum alloys in aqueous solutions of monoethanolethylenediamine (MEEDA), Zaschita metallov, vol. 16, no. 1, p.p. 63–64.
529. H.O. Teeple (1952) Corrosion by some organic acids and related compounds. Corrosion vol. 8 14-28.
530. E. Lingneau (1957) Das Verhalten der Werkstoffe gegenüber Formaldehyde. Werkstoffe und Korrosion vol. 8 480-487.
531. J. Bally (1938) Le matériel en aluminium dans la fabrication des produits chimiques dérivés des gaz de four à coke. Revue de l'Aluminium (no 100), 1155-1165.
532. H. Barkhot (1990) Aliphatics ketones. Corrosion Handbook vol. 7 Dechema
533. W.M. Weigert (1974) 4th edition Ullmanns Encyklopädie der technischen Chemie vol. 7 Weinheim: Verlag Chemie GmbH 74.
534. H. Leyerzapf (1989) Formic acid. Corrosion Handbook vol. 4 Dechema
535. V.I.D. Zaritskii (1990) Corrosion and strength behavior of aluminium in the formic acid-water system. Fisiko Khimicheskaya Mekhanika Materialov (no 2), 110-113.
536. G. Elsner (1990) Acetic acid. Corrosion Handbook vol. 6 Dechema
537. R.K. Swandby (1962) Corrosion charts. Guides to materials selection. Chemical and Engineering vol. 69 186.
538. I.I. Skvortsov (1960) An investigation of the corrosion resistance of welded joints in aluminium. Corrosion vol. 16 159a.
539. A.B. McKee and W.W. Binger (1957) Using aluminum alloys with short chain aliphatic acids and anhydrides. Corrosion vol. 13 786t-792t.
540. F. Ritter (1957) Korrosionstabellen metallischer Werkstoffe. 4th edition Wien: Springer 88.
541. 4th edition Ullmanns Encyklopädie der technischen Chemie vol. 11 57.
542. E. Rabald (1955) Essigsäure Dechema Werkstofftabelle
543. W.Z. Friend and J.F. Mason (1949) Corrosion tests in the processing of soap and fatty acids. Corrosion vol. 5 355-368.
544. L. Hasenberg (1989) Alkanecarboxylic acids. Corrosion Handbook vol. 4 Dechema
545. G. L'Hoir (1937) Les grands réservoirs de stockage en aluminium. L'aluminium et les acides gras. Revue de l'Aluminium (no 95), 923-926.
546. F. Ritter (1957) Korrosionstabellen metallischer Werkstoffe. 4th edition Wien: Springer 88.
547. L. Hasenberg (1987) Acetates. Corrosion Handbook vol. 1 Dechema
548. L. Hasenberg (1991) Carboxylic acids esters. Corrosion Handbook vol. 10 Dechema
549. M. Loury and C. Defromont (1956) Étude sur la corrosion des métaux par l'oléine. Revue française des corps gras 436-444.
550. Somekh G.S., Water—pyridine a azeotrope is an excellent Rankine cycle fluid, IECEC 75, p. 1443–1447.
551. G. Elsner, G. Jänsch-Kaiser and D.H. Sharp (1987) Soil underground corrosion. Corrosion Handbook vol. 1
552. G. Matthess and A. Pekdeger (1980) Chemical and biochemical reactions during ground water regeneration. Wasser/Abwasser vol. 121 214.
553. J.F. Whiting and T.E. Wright (1962) Tests to five indicate aluminum alloys pipe gives an economical service. Materials Protection vol. 1 36-46.
554. R.F. Thomas (1990) Corrosion of metals in New Zealand soils. Corrosion Australasian vol. 15 8-11.
555. Romanoff M., Underground corrosion, Rapport NBS Circulaire 579 du 01/04/57.
556. D.O. Sprowls and M.E. Carlisle (1961) Resistance of aluminum alloys to underground corrosion. Corrosion vol. 17 125t-132t.
557. Latin A., Metallurgical considerations in the use of aluminium for cable shielding. Metallurgia, vol. 44, p. 167–173, 231–238.
558. G.S. Haynes and R. Baboian (1979) A comparative study of the corrosion resistance of cable-shielding materials. Materials Performance vol. 18 45-56.
559. G.S. Haynes, G. Hessler, R. Gerdes, K. Bow and R. Baboian (1989) A method for corrosion testing of cable-shielding materials in soils. ASTM STP 144-155.
560. T.E. Wright (Sept. 1976) New trends in buried aluminum pipelines. Materials Performance 26-28.
561. Snodgrass J.S., Soil corrosion of aluminum in underground electric plasma, Corrosion NACE 75, paper No. 130.
562. T.E. Wright (1983) The corrosion behavior of aluminium pipe. Materials Performance vol. 22 9-12.
563. C.A. Smith and F.I. Mech (Feb. 1981) Soil in the corrosion process. Anti-Corrosion 5-8.
564. A.M. Al Abbassi and S. Basu (May 1992) Aluminium lamp posts: corrosion problems and solutions. Fifth International Aluminium Extrusion Technology Seminar Chicago 503-510.
565. D.O. Sprowls and M.E. Carlisle (1961) Resistance of aluminum alloys to underground corrosion. Corrosion vol. 17 125t-132t.
566. J.L.R. Hayden (1907) AIEE Transactions vol. 26(part I)
567. W.H. French and R.B. Lightner (October 1973) Aluminium underground electrical system. International Conference on Aluminium Industrial Products Pittsburgh
568. W.H. French (1973) Alternating current corrosion of aluminum. IEEE Transactions Power Apparatus and Systems vol. 92 2053-2062.
569. Serra E. T., de-Araujo M.M., Mannheimer W.A., On the influence of alternating current on the corrosion of aluminium and copper in contact with the soil, Corrosion 79, paper No. 55.
570. B.H. Wyma and R.H. Wagner (1964) Aluminium use in the fertilizer industry. Chemical Engineering Progress vol. 60 55-62.
571. The Aluminum Association (1970) Aluminium for storage of nitrogen fertilizer solutions.
572. T. Marshall and L.G. Neubauer (1955) Corrosion of aircraft structural materials by agricultural chemicals I. Laboratory tests with fertilizers compounds. Corrosion vol. 11 84t-92t.
573. C.F. Schreiber (1955) Corrosion of aircraft structural materials by agricultural chemicals II. Effect of insecticides, herbicides, fungicides and fertilizers. Corrosion vol. 11 119t-130t.
574. Coffrage en aluminium pour la construction de la centrale hydro-électrique de Revin. Revue suisse de l'aluminium vol. 24 52-54.
575. C.J. Walton, F.L. McGeary and E.T. Englehart (1957) Compatibility of aluminium with alkaline building products. Corrosion vol. 13 807t-816t.
576. A. Guilhaudis (1962) Les alliages légers exposés à l'atmosphère marine. Corrosion et Anticorrosion vol. 10 80-85.
577. L. Tronstad and R. Veimo (1939) Korrosion von Aluminium in verschiedenen Mörtelmaterialen. Aluminium vol. 12 839-842.
578. J.H. Jenks, T.E. Wright and H.P. Godard (1962) Die Beständigkeit von Aluminium gegen Korrosion durch Beton, Verputz und Mörtel. Baugewerbe 18.
579. A. Bukowiecki (1965) Über das Korrosionsverhalten von Eisen und Nichteisenmetallen gegenüber verschieden Zementen und Mörteln. Scheizerarchiv 9.
580. F.L. McGeary (1966) Performance of aluminium in concrete containing chlorides. Journal of the American Concrete Institute vol. 62 247-265.
581. W. Copenhagen and J.A. Castello (1970) Corrosion of aluminium alloys balusters in reinforced concrete bridge. Materials Protection and Performance vol. 9 31-34.
582. J.P. Bacaert and C. Lyonnet (1976) Comportement de l'aluminium et de ses alliages au contact des bétons. Revue de l'Aluminium 175-190.
583. F.C. Porter (1962) Aluminium embedded in building mortars and plasters. Ten years tests. Metallurgia vol. 65 65-71.
584. M. Foucault (1977) La corrosion des métaux par le plâtre. Colloque RILEM 489-507.
585. Le comportement des métaux au contact du plâtre. Revue de l'Aluminium 73-76.
586. V.R. Gray (1958) The acidity of the wood. Journal Institute Wood Science 58-64.
587. S.G. Clarke and E.E. Longhurst (1961) The Corrosion of metals by acid vapors from wood. Journal Applied Chemistry vol. 11 435-443.
588. T.E. Wright, H.P. Godard and I.H. Jenks (1957) The performance of Alcan 65S-T6 aluminium alloys embedded in certain woods under marine conditions. Corrosion vol. 12 481t-487t.
589. C. Panseri and G. Luft (1960) Influenza della natura del legno sulla corrisione in aqua di mare delle viti lega leggera. ISML, rapport no. 233, série X
590. D.W. Simm and H.E. Button (1985) The corrosion behavior of certains metals in Cca-treated timber. Environmental tests at 100 relative humidity. Corrosion prevention & control vol. 32 25-35.
591. R.H. Farmer and F.C. Porter (1963) The corrosion of aluminium in contact with wood. Metallurgia 161-167.
592. D. Knotkova-Cermakova and J. Vilcava (1971) Corrosion effects of plastics, rubber and wood on metals in confined spaces. British Corrosion Journal vol. 6 17-22.
593. D.S. Van Delinder and C.J. Hilado (1975) Corrosion protection for metals in contact with rigid polyurethane foam, February. Journal of Cellular Plastics 25-35.
594. R.W. Elliott (1986) Corrosivity of polyurethane foam toward metals. Journal of Thermal Insulation vol. 10 142-146.
595. The Aluminium Association (1970) Aluminium alloys in the plastics and resins industry.
596. McGeary (Fev. 1966) Journal of American Concrete Institute 247.
597. B. Buclez (1997) L'aluminium au contact des aliments et la santé. Annales des falsifications de l'expertise chimique et toxicologique, no. 940 207-216.
598. J.A.T. Pennington and S.A. Schoen (1995) Estimates of dietary exposure to aluminium. Food Additives and Contaminants vol. 12 119-128.
599. M.P. Schmidt (avril 1997) Migration from aluminium. Pechiney Rhenalu
600. J.L. Greger, W. Goetz and D. Sullivan (1985) Aluminium levels in foods cooked and stored in aluminium pans, trays and foils. Journal of the Food Protection vol. 48 772-777.
601. J.P. Muller, A. Steinnegger and C. Schlatter (1993) Contribution of aluminium from packaging materials and cooking ustensils to the daily aluminium intake. Z Lebensm Unters Forsch vol. 197 332-341.
602. Provisional tolerable weekly intake (PTWI) for aluminium. Toxicological evaluation of current food additives and contaminants WHO-FAO Expert Committee on Food Additives 113-154.
603. P. Galle (1986) La toxicité de l'aluminium. La Recherche, no. 178 766-776.
604. B. Buclez (30 mai 1998) Y a-t-il une neurotoxicité de l'aluminium? Connaissances actuelles Genève: Le Concours Médical 1482-1485.
605. M.A. Lovell, D. Ehmann and W.R. Markesbery (1993) Laser microprobe analysis of brain aluminium in Alzheimer disease. Annals of neurology vol. 33 36-42.
606. E. Bjertness, J.M. Candy, A. Torvik, et al. (1996) Content of brain aluminium is not elevated in Alzheimer disease. Alzheimer Disease and associated disorders vol. 10 171-174.
607. World Heath Organization (WHO), International Programme on Chemical Safety. Environmental Health Criteria for Aluminium (Collective views of the task group IPCS-EHC-95-96).
608. M.A. Trillat (1915) Emploi de l'aluminium dans les industries alimentaires. Bulletin de la Société d'encouragement de l'industrie nationale, no. 122 555-574.
609. P. Prévot (1947) L'emploi de l'aluminium dans le matériel d'industrie laitère. Revue de l'Aluminium 121-128.
610. L'aménagement des cales à poisson des chalutiers modernes. Revue de l'Aluminium, no. 252 317-324.
611. J. Bailly (1932) Le matériel de brasserie. Cuves de fermentation, tank de garde. Revue de l'Aluminium, no. 48 1741-1752.
612. Les cuves de fermentation et de stockage de la brasserie Arthur Guiness à Saint James Gate. 170 000 de réservoirs en aluminium. Revue de l'Aluminium, no. 303 1237.
613. C.F. Poe, R.M. Warnock and A.P. Wyss (1935) Action of dilute acids on aluminium. Industrial and Engineering Chemistry vol. 27 1505-1507.
614. J.M. Bryan (1948) Aluminium and aluminium alloys in the food industry with special reference to corrosion and its prevention. special report no. 50 Cambridge: Department of Science and industry, Food investigation
615. A. Baudart (1967) L'aluminium dans les industries alimentaires. Revue de l'Aluminium 521-594.
616. E. Kunze (1976) Corrosive properties of various types of foodstuff and the like. Aluminium vol. 52 296-301.
617. EWAA (1974) Resistance of aluminium to attack by natural foodstuffs and some organic acids. report by Food Legislation Study Group
618. C.S. Ash (1935) Metals in wineries. Industry Engineering and Chemistry vol. 27 1243-1244.
619. E. Walter (1951) The action of metals on alcoholic liquids. Alkohol industry vol. 64 235-237.
620. R. Seligman and P. Williams (1922) Cleaning of aluminium utensils. Journal of Institute of Metals
621. G. Dauphin, L. Kerherve, J.-P. Labbe and J. Pagetti (nov., 1978) Corrosion par les produits de net-toyage et de désinfection dans les industries alimentaires. Matériaux et Techniques 379-382.
622. L. Kernerve, G. Dauphin and F. Michel (1984) Corrosion des alliages d'aluminium et des aciers inoxydables par les produits de nettoyage et de désinfection. Industries Alimentaires et Agricoles vol. 101 779-787.
623. Norme NF A 91-451: Traitements de surface. Aluminium et alliages d'aluminium. Qualification des produits d'entretien.
624. H. Hinüber (1990) Cleaning of anodized and coated aluminium façades. Aluminium vol. 66 1148-1152.
625. V.J. Hill (1971) Résistance à l'incendie des constructions en aluminium. rapport du Comité international de développement de l'aluminium 7132
626. A.V. Grosse and J.B. Conway (1958) Combustion of metals in oxygen. Industrial and Engineering Chemistry vol. 50 663-672.
627. R. Bourrianes (1972) Température de l'aluminium pendant sa combustion dans les mélanges oxygène/argon, dans l'azote et dans l'air. compte-rendu de l'Académie des sciences, Paris vol. 275 717-720.
628. D.K. Kuehl (1966) Ignition and combustion of aluminium and beryllium. AIAA Journal vol. 12 2239-2247.
629. M. Drouzy and C. Mascre (1969) The oxidation of liquid non-ferrous metals in air or oxygen. Metallurgical Review 25-46.
630. W. Thiele (1962) L'oxydation de l'aluminium en fusion. Aluminium 707.
631. E.G. West (1982) The fire risk in aluminium alloys ships structures. The Metallurgist and Materials Technologist 395-398.
632. K.R. Trethwey and J. Chamberlain (1996) 2nd edition Corrosion for Science and Engineering Harlow, UK: Longman
633. J. Nitsche and G. Lang (1994) Glossary of Technical Terms. Metallurgy of Non-ferrous Metals Düsseldorf: Aluminium Verlag
634. L.L. Schreir, R.A. Jarman and G.T. Burnstein (1993) 3rd edition Corrosion Oxford: Butterworth-Heinemann
635. M.G. Fontana and N.D. Greens (1978) Corrosion Engineering New York: McGraw-Hill
636. J.C. Scully (1975) 2nd edition The Fundamentals of Corrosion Oxford: Pergamon International Library
637. H.P. Godard and M. Bothwell (1967) The Corrosion of Light Metals New York: John Wiley and Sons
638. Combating Chemical Corrosion with Alcoa Aluminium Pittsburgh: Aluminium Company of America
639. Wernick S., Pinner R., Sheasby P.G., The Surface Treatment and Finishing Aluminium and Its Alloys, 5th edition, ASM International, Ohio/Finishing Publications Ltd, Teddington, UK.
640. C. Kammer (1999) Aluminium Handbook, Vol. 1: Fundamentals and Meterials Düsseldorf: Aluminium-Verlag
641. C. Kammer (2003) Aluminium Handbook, Vol. 2: Forming, Casting, Surface Treatment, Recycling and Ecology Düsseldorf: Aluminium-Verlag
642. A.S. Bakalov, H. Beneke and I. Wulff (1994) Wörterbuch für den Korrosionsschutz Essen: Vulkan-Verlag
643. Aluminium Taschenbuch Düsseldorf: Aluminium Verlag
644. J. Philibert, A. Vignes, Y. Bréchet and P. Combrade (1998) Métallurgie: du minerai au matériau. Paris: Masson
645. P. Arnaud (1996) Cours de chimie organique. 16 e édition Paris: Dunod
646. J. Talbot (1995) Les éléments chimiques et les hommes. Paris: SIRPE
647. R. Perrin and J.-P. Scharff (1993) Chimie industrielle. Paris: Masson
648. P. Atkins (1992) Chimie générale. Paris: InterÉditions
649. Mémento technique de l'eau 9 e édition Paris: Degrémont
650. C. Vargel (1979) Le comportement de l'aluminium et de ses alliages. Paris: Dunod
651. D. Altenpohl (1976) Un regard á l'intérieur de l'aluminium. Une introduction à la métallurgie structurale et à la transformation de l'aluminium. Düsseldorf: Aluminium Verlag
652. P. Junière and M. Sigwalt (1962) Les applications de l'aluminium dans les industries chimiques et alimentaires. Paris: Eyrolles
653. P. Karrer (1948) Traité de chimie organique. Paris: Dunod
654. Le transport des matières dangereuses par route ADR TMDR 1997, Le Règlement, Éditions ADIIS, Lyon.
655. Demi-produits aluminium Pechiney Rhenalu
656. Guide de la chimie. Union des industries chimiques
657. Annuaire produits chimiques. Union des industries chimiques
658. Société des annuaires internationaux, Lexique technique des produits chimiques Vincennes: Éditions Rousset
659. Aluminium with Food and Chemical Compatibility Data New York: The Aluminium Association
660. Renseignements pratiques sur l'aluminium et ses alliages 5 e édition L'aluminium Français