In situ out-of-plane testing of as-built and retrofitted unreinforced masonry walls

Journal of Structural Engineering (United States)

Volumn 140, Issue 6, 2014, Pages

  Derakhshan, Hossein ^a   Dizhur, Dmytro ^b   Griffith, Michael C ^a   Ingham, Jason M ^b  

^a UNIVERSITY OF ADELAIDE   (Australia)

^b UNIVERSITY OF AUCKLAND   (New Zealand)

Author keywords

Axial loads; Brick masonry; Concrete and Masonry Structures; Flexural strength; In situ tests; Lateral loads; Stiffness; Walls

Indexed keywords

AXIAL LOADS; BENDING STRENGTH; BRICK; BUILDINGS; CARBON FIBER REINFORCED PLASTICS; DIAPHRAGMS; REINFORCED CONCRETE; RETROFITTING; STIFFNESS; TESTING;

BRICK MASONRY; IN-SITU TEST; LATERAL LOADS; MASONRY STRUCTURES; WALLS;

WALLS (STRUCTURAL PARTITIONS);

EID: 84901022908     PISSN: 07339445     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)ST.1943-541X.0000960     Document Type: Article

References (24)

1. Abrams, D. P., Angel, R., and, Uzarski, J. (1996). " Out-of-plane strength of unreinforced masonry infill panels." Earthquake Spectra, 12 (4), 825-844. EASPEF 8755-2930 10.1193/1.1585912
2. ASCE. (2007). " Seismic rehabilitation of existing buildings." ASCE/SEI 41-06, Reston, VA.
3. ASTM. (2001). " Standard test method for measurement of masonry flexural bond strength." C1072 00a, West Conshohocken, PA.
4. ASTM. (2003). " Standard test methods for sampling and testing brick and structural clay tile." C67-03a, West Conshohocken, PA.
5. ASTM. (2004). " Standard test method for compressive strength of masonry prisms." C1314 03b, West Conshohocken, PA.
6. ASTM. (2008). " Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens)." C109/C109M-08, ASTM International, PA.
7. Calvi, G. M., Kingsley, G. R., and, Magenes, G. (1996). " Testing of masonry structures for seismic assessment." Earthquake Spectra, 12 (1), 145-162. EASPEF 8755-2930 10.1193/1.1585872
8. Carpinteri, A., Invernizzi, S., and, Lacidogna, G. (2005). " In situ damage assessment and nonlinear modelling of a historical masonry tower." Eng. Struct., 27 (3), 387-395. ENSTDF 0141-0296 10.1016/j.engstruct.2004.11.001
9. Chiostrini, S., Galano, L., and, Vignoli, A. (2003). " In situ shear and compression tests in ancient stone masonry walls of Tuscany, Italy." J Test Eval., 31 (4), 289-303.
10. Corradi, M., Borri, A., and, Vignoli, A. (2003). " Experimental study on the determination of strength of masonry walls." Constr. Build. Mater., 17 (5), 325-337. CBUMEZ 0950-0618 10.1016/S0950-0618(03)00007-2
11. Derakhshan, H., Griffith, M., and, Ingham, J. (2013 a). " Out-of-plane behavior of one-way unreinforced masonry walls." J. Eng. Mech., 10.1061/(ASCE)EM.1943-7889.0000347, 409-417. JENMDT 0733-9399
12. Derakhshan, H., Griffith, M. C., and, Ingham, J. M. (2013 b). " Airbag testing of multi-leaf unreinforced masonry walls subjected to one-way bending." Eng. Struct., 57, 512-522. 10.1016/j.engstruct.2013.10.006
13. Doherty, K. T. (2000). " An investigation of the weak links in the seismic load path of unreinforced masonry buildings." Ph.D. thesis, Faculty of Engineering, Univ. of Adelaide, Adelaide, Australia.
14. Downes, G., Dowrick, D., Van Dissen, R., Taber, J., Hancox, G., and, Smith, E. (2001). " The 1942 Wairarapa, New Zealand, earthquakes; Analysis of observational and instrumental data." Bull. New Zeal. Soc. Earthquake Eng., 34 (2), 125-157.
15. Griffith, M. C., Kashyap, J., and, Mohamed Ali, M. S. (2013). " Flexural displacement response of NSM FRP retrofitted masonry walls," Constr. Build. Mater., 49, 1032-1040. 10.1016/j.conbuildmat.2012.06.065
16. Griffith, M. C., Magenes, G., Melis, G., and, Picchi, L. (2003). " Evaluation of out-of-plane stability of unreinforced masonry walls subjected to seismic excitation." J. Earthquake Eng., 7 (Supp. 1), 141-169. 1363-2469 10.1080/13632460309350476
17. Hamed, E., and, Rabinovitch, O. (2010). " Failure characteristics of FRP-strengthened masonry walls under out-of-plane loads." Eng. Struct., 32 (8), 2134-2145. ENSTDF 0141-0296 10.1016/j.engstruct.2010.03.016
18. Kashyap, J., Willis, C. R., Griffith, M. C., Ingham, J. M., and, Masia, M. J. (2012). " Debonding resistance of FRP-to-clay brick masonry joints." Eng. Struct., 41, 186-198. ENSTDF 0141-0296 10.1016/j.engstruct. 2012.03.032
19. Lopes, V., Guedes, J. M., Pauperio, E., Arde, A., and, Costa, A. (2009). " Ambient vibration testing and seismic analysis of a masonry chimney." J. Build. Apprais., 5 (2), 101-121. 1742-8262 10.1057/jba.2009.24
20. Lumantarna, R., Biggs, D. T., and, Ingham, J. M. (2012). " Compressive, flexural bond and shear bond strengths of in-situ New Zealand unreinforced clay brick masonry constructed using lime mortar between the 1880s and 1940s." J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533.0000685. JMCEE7 0899-1561
21. NZS. (2004). " Structural design actions: Part 5: Earthquake actions New Zealand." NZS 1170.5:2004, Standards New Zealand.
22. New Zealand Society for Earthquake Engineering (NZSEE). (2006). " Assessment and improvement of the structural performance of buildings in earthquake. Recommendations of a New Zealand Society for Earthquake Engineering study group on earthquake risk buildings." Wellington, New Zealand.
23. Priestley, M. J. N. (1985). " Seismic behavior of unreinforced masonry walls." Bull. New Zeal. Natl. Soc. Earthquake Eng., 18 (2), 191-205. BNZED6 0110-0718
24. Vaculik, J. (2012). " Unreinforced masonry walls subjected to out-of-plane seismic actions." Ph.D. thesis, Univ. of Adelaide, Adelaide, Australia.