The Mode i interlaminar fracture toughness of chemically carbon nanotube grafted glass fabric/epoxy multi-scale composite structures

Composites Part A: Applied Science and Manufacturing

Volumn 63, Issue , 2014, Pages 94-102

  Eskizeybek, Volkan ^a   Avci, Ahmet ^b   Gülce, Ahmet ^b  

^a ÇANAKKALE ONSEKIZ MART UNIVERSITY   (Turkey)

^b SELCUK UNIVERSITY   (Turkey)

Author keywords

A. Laminates; B. Fracture toughness; D. Electron microscopy; E. Injection moulding

Indexed keywords

CARBON NANOTUBES; FOURIER TRANSFORM INFRARED SPECTROSCOPY; FRACTURE MECHANICS; FRACTURE TESTING; GLASS; GRAFTING (CHEMICAL); INJECTION MOLDING; SCANNING ELECTRON MICROSCOPY; WEAVING;

CHEMICAL ROUTES; COVALENT INTERACTIONS; E.INJECTION MOULDING; INTERFACE REGIONS; INTERFACIAL ADHESIONS; INTERLAMINAR FRACTURE; INTERLAMINAR FRACTURE TOUGHNESS; MULTI-SCALE COMPOSITES;

FRACTURE TOUGHNESS;

EID: 84900851885     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2014.04.013     Document Type: Article

References (53)

1. S.S. Wicks, R.G. de Villoria, and B.L. Wardle Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes Compos Sci Technol 70 1 2010 20 28
2. W.J. Cantwell, and J. Morton The impact resistance of composite-materials - a review Composites 22 5 1991 347 362
3. J. Williams, N. Graddage, and S. Rahatekar Effects of plasma modified carbon nanotube interlaminar coating on crack propagation in glass epoxy composites Compos Part A: Appl Sci Manuf 54 2013 173 181
4. S. Storck, H. Malecki, T. Shah, and M. Zupan Improvements in interlaminar strength: a carbon nanotube approach Compos Part B-Eng 42 6 2011 1508 1516
5. A.P. Mouritz Fracture and tensile fatigue properties of stitched fibreglass composites Proc Instit Mech Eng Part L: J Mater Des Appl 218 L2 2004 87 93
6. A.P. Mouritz Review of z-pinned composite laminates Compos Part A-Appl Sci Manuf 38 12 2007 2383 2397 (Pubitemid 350167022)
7. A.P. Mouritz, K.H. Leong, and I. Herszberg A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites Compos Part A-Appl Sci Manuf 28 12 1997 979 991 (Pubitemid 127412898)
8. C.A. Steeves, and N.A. Fleck In-plane properties of composite laminates with through-thickness pin reinforcement Int J Solids Struct 43 10 2006 3197 3212
9. Tong L, Mouritz AP, Bannister MK. 3D fibre reinforced polymer composites. Oxford:Elsevier; 2002.
10. C.Y. Li, and T.W. Chou Elastic moduli of multi-walled carbon nanotubes and the effect of van der Waals forces Compos Sci Technol 63 11 2003 1517 1524
11. E.T. Thostenson, and T.W. Chou On the elastic properties of carbon nanotube-based composites: modelling and characterization J Phys D Appl Phys 36 5 2003 573 582
12. K.K. Kar, A. Rahaman, P. Agnihotri, and D. Sathiyamoorthy Synthesis of carbon nanotubes on the surface of carbon fiber/fabric by catalytic chemical vapor deposition and their characterization Fullerene Nanotubube Carbon Nanostruct 17 3 2009 209 229
13. F.L. Matthews, and R.D. Rawlings Composite materials: engineering and science 1999 Woodhead Publishing Limited Cambridge
14. O. Boura, E.K. Diamanti, S.A. Grammatikos, D. Gournis, and A.S. Paipetis Carbon nanotube growth on high modulus carbon fibres: morphological and interfacial characterization Surf Interface Anal 45 9 2013 1372 1381
15. F. An, C.X. Lu, Y.H. Li, J.H. Guo, X.X. Lu, and H.B. Lu et al. Preparation and characterization of carbon nanotube-hybridized carbon fiber to reinforce epoxy composite Mater Des 33 2012 197 202
16. H. Qian, A. Bismarck, E.S. Greenhalgh, and M.S.P. Shaffer Carbon nanotube grafted carbon fibres: a study of wetting and fibre fragmentation Compos Part A-Appl Sci Manuf 41 9 2010 1107 1114
17. R.J. Sager, P.J. Klein, D.C. Lagoudas, Q. Zhang, J. Liu, and L. Dai et al. Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix Compos Sci Technol 69 7-8 2009 898 904
18. E.T. Thostenson, W.Z. Li, D.Z. Wang, Z.F. Ren, and T.W. Chou Carbon nanotube/carbon fiber hybrid multiscale composites J Appl Phys 91 9 2002 6034 6037
19. J. Zhu, A. Imam, R. Crane, K. Lozano, V.N. Khabashesku, and E.V. Barrera Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength Compos Sci Technol 67 7-8 2007 1509 1517 (Pubitemid 46381369)
20. E. Bekyarova, E.T. Thostenson, A. Yu, H. Kim, J. Gao, and J. Tang et al. Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites Langmuir 23 7 2007 3970 3974 (Pubitemid 46581929)
21. X.D. He, F.H. Zhang, R.G. Wang, and W.B. Liu Preparation of a carbon nanotube/carbon fiber multi-scale reinforcement by grafting multi-walled carbon nanotubes onto the fibers Carbon 45 13 2007 2559 2563
22. L. Mei, Y.B. Li, R.G. Wang, C. Wang, Q.Y. Peng, and X.D. He Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites with high interfacial strength Polym Polym Compos 19 2-3 2011 107 112
23. Q.Y. Peng, X.D. He, Y.B. Li, C. Wang, R.G. Wang, and P.A. Hu et al. Chemically and uniformly grafting carbon nanotubes onto carbon fibers by poly(amidoamine) for enhancing interfacial strength in carbon fiber composites J Mater Chem 22 13 2012 5928 5931
24. X.Y. Liu, Y. Song, C.M. Li, and F.P. Wang Effects of carbon nanotubes grafted on a carbon fiber surface on their interfacial properties with the matrix in composites New Carbon Mater 27 6 2012 455 461
25. K.L. Kepple, G.P. Sanborn, P.A. Lacasse, K.M. Gruenberg, and W.J. Ready Improved fracture toughness of carbon fiber composite functionalized with multi walled carbon nanotubes Carbon 46 15 2008 2026 2033
26. R.B. Mathur, S. Chatterjee, and B.P. Singh Growth of carbon nanotubes on carbon fibre substrates to produce hybrid/phenolic composites with improved mechanical properties Compos Sci Technol 68 7-8 2008 1608 1615
27. H. Qian, A. Bismarck, E.S. Greenhalgh, G. Kalinka, and M.S.P. Shaffer Hierarchical composites reinforced with carbon nanotube grafted fibers: the potential assessed at the single fiber level Chem Mater 20 5 2008 1862 1869 (Pubitemid 351560848)
28. K.A. Wepasnick, B.A. Smith, K.E. Schrote, H.K. Wilson, S.R. Diegelmann, and D.H. Fairbrother Surface and structural characterization of multi-walled carbon nanotubes following different oxidative treatments Carbon 49 1 2011 24 36
29. H.F. Yang, F.H. Li, C.S. Shan, D.X. Han, Q.X. Zhang, and L. Niu et al. Covalent functionalization of chemically converted graphene sheets via silane and its reinforcement J Mater Chem 19 26 2009 4632 4638
30. ASTM D 5528. Standard test method for Mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites. In: ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States; 2007.
31. C. Griswold, W.M. Cross, L. Kjerengtroen, and J.J. Kellar Interphase variation in silane-treated glass-fiber-reinforced epoxy composites J Adhes Sci Technol 19 3-5 2005 279 290 (Pubitemid 41009672)
32. S.H. Yun, D.H. Cho, J. Kim, S. Lim, G.W. Lee, and M. Park et al. Effect of silane coupling agents with different organo-functional groups on the interfacial shear strength of glass fiber/Nylon 6 composites J Mater Sci Lett 22 22 2003 1591 1594
33. C. Weigel, and R. Kellner FTIR-ATR-spectroscopic investigation of the silanization of germanium surfaces with 3-aminopropyltriethoxysilane Fresen Z Anal Chem 335 7 1989 663 668 (Pubitemid 20049677)
34. J.S. Tang, T. Mohan, and J.G. Verkade Selective and efficient syntheses of perhydro-1,3,5-triazine-2,4,6-triones and carbodiimides from isocyanates using Zp(Mench(2)Ch(2))(3)N catalysts J Org Chem 59 17 1994 4931 4938
35. P.R. Thakre, D.C. Lagoudas, J.C. Riddick, T.S. Gates, S.J.V. Frankland, and J.G. Ratcliffe et al. Investigation of the effect of single wall carbon nanotubes on interlaminar fracture toughness of woven carbon fiber-epoxy composites J Compos Mater 45 10 2011 1091 1107
36. A.P. Mouritz, C. Baini, and I. Herszberg Mode I interlaminar fracture toughness properties of advanced textile fibreglass composites Compos Part A-Appl Sci Manuf 30 7 1999 859 870
37. M.A. Pinto, V.B. Chalivendra, Y.K. Kim, and A.F. Lewis Effect of surface treatment and Z-axis reinforcement on the interlaminar fracture of jute/epoxy laminated composites Eng Fract Mech 114 2013 104 114
38. L. Carlsson, D.F. Adams, and R.B. Pipes Experimental characterization of advanced composite materials 2003 CRC Press Boca Raton
39. J.K. Kim, and M.L. Sham Impact and delamination failure of woven-fabric composites Compos Sci Technol 60 5 2000 745 761
40. A.B. de Morais, and M.F.S.F. de Moura Evaluation of initiation criteria used in interlaminar fracture tests Eng Fract Mech 73 16 2006 2264 2276
41. F.H. Gojny, M.H.G. Wichmann, B. Fiedler, and K. Schulte Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites - a comparative study Compos Sci Technol 65 15-16 2005 2300 2313 (Pubitemid 41574389)
42. W. Zhang, I. Srivastava, Y.F. Zhu, C.R. Picu, and N.A. Koratkar Heterogeneity in epoxy nanocomposites initiates crazing: significant improvements in fatigue resistance and toughening Small 5 12 2009 1403 1407
43. J. Blanco, E.J. Garcia, R.G. De Villoria, and B.L. Wardle Limiting mechanisms of Mode I interlaminar toughening of composites reinforced with aligned carbon nanotubes J Compos Mater 43 8 2009 825 841
44. W. Zhang, R.C. Picu, and N. Koratkar The effect of carbon nanotube dimensions and dispersion on the fatigue behavior of epoxy nanocomposites Nanotechnology 19 28 2008
45. V.C.S. Chandrasekaran, M.H. Santare, P. Krishnan, and S.G. Advani Amino functionalization of MWNTs and their effect on ILSS of hybrid nanocomposites Compos Interface 18 4 2011 339 355
46. F.H. Zhang, R.G. Wang, X.D. He, C. Wang, and L.N. Ren Interfacial shearing strength and reinforcing mechanisms of an epoxy composite reinforced using a carbon nanotube/carbon fiber hybrid J Mater Sci 44 13 2009 3574 3577
47. Y.X. Li, Y.B. Li, Y.J. Ding, Q.Y. Peng, C. Wang, and R.G. Wang et al. Tuning the interfacial property of hierarchical composites by changing the grafting density of carbon nanotube using 1,3-propodiamine Compos Sci Technol 85 2013 36 42
48. H. Cebeci, R.G. de Villoria, A.J. Hart, and B.L. Wardle Multifunctional properties of high volume fraction aligned carbon nanotube polymer composites with controlled morphology Compos Sci Technol 69 15-16 2009 2649 2656
49. V.C.S. Chandrasekaran, S.G. Advani, and M.H. Santare Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites Carbon 48 13 2010 3692 3699
50. H.S. Kim, and H.T. Hahn Graphite fiber composites interlayered with single-walled carbon nanotubes J Compos Mater 45 10 2011 1109 1120
51. S.C. Joshi, and V. Dikshit Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion J Compos Mater 46 6 2012 665 675
52. L.Y. Tong, X.N. Sun, and P. Tan Effect of long multi-walled carbon nanotubes on delamination toughness of laminated composites J Compos Mater 42 1 2008 5 23
53. E.T. Thostenson, C.Y. Li, and T.W. Chou Nanocomposites in context Compos Sci Technol 65 3-4 2005 491 516 (Pubitemid 40084026)