Poly(ether sulfone) (PES) hollow-fiber membranes prepared from various spinning parameters

Desalination

Volumn 345, Issue , 2014, Pages 21-35

  Alsalhy, Qusay F ^a   Salih, Haydar A ^a   Simone, Silvia ^b   Zablouk, Mumtaz ^a   Drioli, Enrico ^b,c   Figoli, Alberto ^b,c  

^a UNIVERSITY OF TECHNOLOGY   (Iraq)

^b INSTITUTE ON MEMBRANE TECHNOLOGY   (Italy)

^c UNIVERSITY OF CALABRIA   (Italy)

Author keywords

Hollow fiber membrane; Morphology; Polyethersulfone; Spinning parameters

Indexed keywords

ELASTIC MODULI; ETHANOL; MORPHOLOGY; POLYETHYLENE GLYCOLS; SCANNING ELECTRON MICROSCOPY; SPINNING (FIBERS); TENSILE STRENGTH; WATER BACTERIOLOGY;

CROSS SECTIONAL AREA; HOLLOW FIBER MEMBRANES; PHASE-INVERSION METHOD; POLYETHERSULFONES; POROSITY MEASUREMENT; SEPARATION PERFORMANCE; SPINNING PARAMETERS; STRENGTH AND ELONGATIONS;

FIBERS;

ETHANOL; MEMBRANE; POROSITY; SCANNING ELECTRON MICROSCOPY; SOLVENT; YOUNG MODULUS;

EID: 84899968421     PISSN: 00119164     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.desal.2014.04.029     Document Type: Article

References (28)

1. Kim J.-H., Lee K.-H. Effect of PEG additive on membrane formation by phase inversion. J. Membr. Sci. 1998, 138:153-163.
2. Torrestiana-Sanchez B., Ortiz-Basurto R.I., La Fuente E.B. Effect of non-solvents on properties of spinning solutions and polyethersulfone hollow fiber ultrafiltration membranes. J. Membr. Sci. 1999, 152:19-28.
3. Wang D., Li K., Teo W.K. Preparation and characterization of polyvinylidene fluoride (PVDF) hollow fiber membranes. J. Membr. Sci. 1999, 163:211-220.
4. Liu Y., Koops G.H., Strathmann H. Characterization of morphology controlled polyethersulfone hollow fiber membranes by the addition of polyethylene glycol to the dope and bore liquid solution. J. Membr. Sci. 2003, 223:187-199.
5. Xu Z.-L., Alsalhy Qusay F. Effect of polyethylene glycol molecular weights and concentrations on polyethersulfone hollow fiber ultrafiltration membranes. J. Appl. Polym. Sci. 2004, 91:3398-3407.
6. Yoo S.H., Kim J.H., Jho J.Y., Won J., Kang Y.S. Influence of the addition of PVP on the morphology of asymmetric polyimide phase inversion membranes.effect of PVP molecular weight. J. Membr. Sci. 2004, 236:203-207.
7. Chakrabarty B., Ghoshal A.K., Purkait M.K. Effect of molecular weight of PEG on membrane morphology and transport properties. J. Membr. Sci. 2008, 309:209-221.
8. Saljoughi E., Sadrzadeh M., Mohammadi T. Effect of preparation variables on morphology and pure water permeation flux through asymmetric cellulose acetate membrane. J. Membr. Sci. 2009, 326:627-634.
9. Simone S., Figoli A., Criscuoli A., Carnevale M.C., Rosselli A., Drioli E. Preparation of hollow fiber membranes from PVDF/PVP blends and their application in VM. J. Membr. Sci. 2010, 364:219-232.
10. Culfaz P.Z., Wessling M., Lammertink R.G.H. Hollow fiber ultrafiltration membranes with microstructured inner skin. J. Membr. Sci. 2011, 369:221-227.
11. Li Zhansheng, Ren Jizhong, Fane Anthony G., Li Dong Fei, Wong Fook-Sin Influence of solvent on the structure and performance of cellulose acetate membranes. J. Membr. Sci. 2006, 279:601-607.
12. Khayet M., GarcD́ia-Payo M.C., Alsalhy Q., Khulbe K.C., Feng C.Y., Matsuura T. Effects of gas gap type on structural morphology and performance of hollow fibers. J. Membr. Sci. 2008, 311:259-269.
13. Bonyadi S., Chung T. Highly porous and macrovoid-free PVDF hollow fibre membranes for membrane distillation by a solvent-dope solution co-extrusion approach. J. Membr. Sci. 2009, 331:66-74.
14. Feng C.S., Shi B., Li G., Wu Y. Preparation and properties of microporous membrane from poly(vinylidene fluoride cotetrafluoroethylene) (F2.4) for membrane distillation. J. Membr. Sci. 2004, 237:15-24.
15. Alsalhy Qusay F., Algebory Sufyan F., Alwan Ghanim M., Simone S., Figoli A., Drioli E. Hollow fiber ultrafiltration membranes from poly(vinyl chloride).preparation, morphologies, and properties. Sep. Sci. Technol. 2011, 46:2199-2210.
16. Idris A., Yet L.K. The effect of different molecular weight PEG additives on cellulose acetate asymmetric dialysis membrane performance. J. Membr. Sci. 2006, 280:920-927.
17. Wienk I.M., Boom R.M., Beerlage M.A.M., Bulte A.M.W., Smolders C.A., Strathman H. Recent advances in the formation of phase inversion membranes from amorphous or semi crystalline polymers. J. Membr. Sci. 1996, 113:361-371.
18. Shieh J.J., Chung T.S., Wong R., Srinivasan M.P., Raul D.R. Gas separation performance of poly(4-vinylpyridine)/polyetherimide composite hollow fibers. J. Membr. Sci. 2001, 182:111-123.
19. Khayet M., García-Payo M.C., Alsalhy Qusay F., Zubaidy M.A. Structural and performance studies of poly(vinyl chloride) hollow fiber membranes prepared at different air gap lengths. J. Membr. Sci. 2009, 330:30-39.
20. Kim J.Y., Lee H.K., Kim S.C. Surface structure and phase separation mechanism of polysulfone membranes by atomic force microscopy. J. Membr. Sci. 1999, 163:159-166.
21. Xu J., Xu Z.L. Poly(vinyl chloride) (PVC) hollow fiber ultrafiltration membranes prepared from PVC/additives/solvent. J. Membr. Sci. 2002, 208:203-212.
22. Sinha M.K., Purkait M.K. Increase in hydrophilicity of polysulfone membrane using polyethylene glycol methyl ether. J. Membr. Sci. 2013, 437:7-16.
23. Zheng Q.-Z., Wang P., Yang Y.-N. Rheological and thermodynamic variation in polysulfone solution by PEG introduction and its effect on kinetics of membrane formation via phase-inversion process. J. Membr. Sci. 2006, 279:230-237.
24. Kim N., Kim C.S., Leeb Y.T. Preparation and characterization of polyethersulfone membranes with polytoluenesulfonic acid and polyvinylpyrrolidone additives. Desalination 2008, 233:218-226.
25. Deshmukh S.P., Li K. Effect of ethanol composition in water coagulation bath on morphology of PVDF hollow fiber membranes. J. Membr. Sci. 1998, 150:75-85.
26. Alsalhy Qusay F. Effect of ethanol concentrations in internal coagulant on morphology and separation performance of polyethersulfone (PES) hollow fiber UF membranes prepared by PES/ethanol/NMP solution. Eng. Technol. 2007, 25:253-265.
27. Yan J., Lau W.W.Y. Effect of internal coagulant on morphology of polysulfone hollow fiber membranes. Sep. Sci. Technol. 1998, 33:33-55.
28. Miao X.Q., Sourirajan S., Zhang H., Lau W.W.Y. Production of polyethersulfone hollow fiber ultrafiltration membranes.I. Effects of water (internal coagulant) flow rate (WFR) and length of air gap (LAG). Sep. Sci. Technol. 1996, 31:141-172.