On-site testing and diagnosis of transmission power cables up to 230 kV using damped AC voltages

IEEE Electrical Insulation Magazine

Volumn 30, Issue 3, 2014, Pages 27-38

  Gulski, Edward ^a   Rakowska, Aleksandra ^a   Siodła, Krzysztof ^a   Jongen, Rogier ^b   Minassian, Rafael ^c   Cichecki, Piotr ^d   Parciak, Jarosław ^e   Smit, Johan ^f  

^a POZNAN UNIVERSITY OF TECHNOLOGY   (Poland)

^b Onsitehvsolutions AG Switzerland   (Switzerland)

^c Onsite Hv Solutions Americas Inc   (Canada)

^d Onsite Hv Solutions Benelux BV ^*  (Netherlands)

^e Onsite Hv Solutions Central Europe Spz Oo   (Poland)

^f DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

after laying testing; asset management; condition assessment; damped AC voltage; dielectric dissipation factor; maintenance; partial discharge detection; transmission power cable

Indexed keywords

ASSET MANAGEMENT; INSULATION; MAINTENANCE; PARTIAL DISCHARGES; TELECOMMUNICATION CABLES;

AFTER-LAYING TESTING; CONDITION ASSESSMENTS; DAMPED AC; DIELECTRIC DISSIPATION FACTORS; PARTIAL DISCHARGE DETECTION; TRANSMISSION POWER CABLES;

CABLES;

EID: 84899871882     PISSN: 08837554     EISSN: None     Source Type: Journal    
DOI: 10.1109/MEI.2014.6804739     Document Type: Article

References (36)

1. C. Aucourt, W. Boone, W. Kalkner, R. D. Naybour, and F. Ombello, "Recommendations for a new after laying test method for high voltage extruded cable systems," CIGRE paper no. 21-105, Aug. 1990.
2. P. P. Seitz, B. Quak, E. Gulski, J. J. Smit, P. Cichecki, P. de Vries, and F. Petzold, "Novel method for on-site testing and diagnosis of transmission cables up to 250kV," in Proceedings JiCable '07, 7th International Conference on Insulated Power Cables, 2007, Paper 16.
3. F. J. Wester, E. Gulski, and J. J. Smit, "Detection of PD at different AC voltage stresses in power cables," IEEE Electr. Insul. Mag., vol. 23, no. 4, pp. 28-43, 2007. (Pubitemid 47261516)
4. E. Gulski, E. Lemke, M. Gamlin, E. Gockenbach, W. Hauschild, and E. Pultrum, "Experiences in partial discharge detection of distribution power cable systems," Electra, vol. 208, pp. 34-43, 2003.
5. E. Gulski, P. Cichecki, E. R. S. Groot, J. J. Smit, F. de Vries, J. Slangen, E. R. S. Groot, J. Pellis, D. van Houwelingen, T. J. W. H. Hermans, B. Wegbrands, and L. Lamballais, "Conditon assessment of service aged HV power cables," CIGRE paper D1-206, 2008.
6. J. Popma and J. Pellis, "Diagnostics for high voltage cable systems," Proceedings ERA Conference on HV Plant Life Extension, Belgium, 23-24 Nov. 2000.
7. J. Densley, "Ageing mechanisms and diagnostics for power cables-An overview," IEEE Electr. Insul. Mag., vol. 17, no. 1, pp. 14-21, Jan./Feb. 2001.
8. E. Gulski, E. F. J. Wester, P. Wester, E. R. S. Groot, and J. W. van Doeland, "Condition assessment of high voltage power cables," Proceedings CIGRE 2004 Session, paper D1-103.
9. E. Gulski, J. J. Smit, P. Cichecki, P. P. Seitz, B. Quak, F. de Vries, and F. Petzold, "Insulation diagnosis of HV power cables," in Proceedings Jicable '07, 7th International Conference on Insulated Power Cables, Jun. 2007, paper 51.
10. E. Gulski, P. Cichecki, J. J. Smit, F. de Vries, R. Bodega, T. Hermans, and P. P. Seitz, "Dielectric loss diagnosis of service aged HV power cables," Proceedings of CIGRE D1 Colloquium, Budapest, Hungary, 2009.
11. P. Cichecki, R. A. Jongen, E. Gulski, and J. J. Smit, "Statistical approach in power cables diagnostic data analysis," IEEE Trans. Dielectr. Electr. Insul., vol. 15, no. 6, pp. 1559-1569, 2008.
12. E. Gulski, P. Cichecki, F. J. Wester, J. J. Smit, R. Bodega, T. J. W. H. Hermans, P. P. Seitz, B. Quak, and F. de Vries, "On-site testing and PD diagnosis of high voltage power cables," IEEE Trans. Dielectr. Electr. Insul., vol. 15, no. 6, pp. 1691-1700, 2008.
13. E. Gulski, P. Cichecki, Z. Jiankang, X. Rong, R. Jongen, P. P. Seitz, A. Porsche, and L. Huang, "Practical aspects of on-site testing and diagnosis of transmission power cables in China," presented at CMD2010, Tokyo, Japan, 2010.
14. SC 15 and SC D1. "On-site testing and PD measurements," CIGRE Technical Brochure 502, 2012.
15. E. Gulski and R. Patterson, "Importance of on-site testing and diagnosis of power cables," presented at NETA PowerTest 2011 Conference, Washington, DC, 2011.
16. A. Rakowska, S. Noske, and K. Siodła, "Partial discharge measurements as a data source supporting power cable network management," in Proceedings International Conference CIRED 2009, 2009, paper 492.
17. A. Rakowska, K. Domke, A. Grzybowski, Z. Nadolny, and K. Siodła, "Wyznaczanie temperatury zyły roboczej kabla elektroenergetycznego wysokiego napiȩcia," Przegla̧d Elektrotechniczny, 11/2010, s. 202-204.
18. E. Gulski, P. Cichecki, J. J. Smit, F. de Vries, J. Pellis, D. van Houwelingen, F. Wester, R. Bodega, and T. J. W. H. Hermans, "Condition assessment of transmission power cables," presented at Cigre, Paris, France, 2011.
19. L. A. Chmura, P. H. F. Morshuis, E. Gulski, and J. J. Smit, "Identification and treatment of outliers in failure datasets-Practical aspects of statistical analysis," presented at the 17th International Symposium on High Voltage, Hannover, Germany, 2011.
20. L. A. Chmura, P. H. F. Morshuis, E. Gulski, J. J. Smit, and A. Janssen, "Statistical analysis of subcomponent failures in power transformers," in EIC 2011 Proceedings, 2011, pp. 216-220.
21. L. A. Chmura, P. H. F. Morshuis, E. Gulski, J. J. Smit, and A. Janssen, "The application of statistical tools for the analysis for power transformer failure," presented at the 17th International Symposium on High Voltage, Kyoto, Japan, 2011.
22. L. A. Chmura, P. H. F. Morshuis, E. Gulski, J. J. Smit, R. A. Jongen, and A. L. J. Janssen, "The application of statistical tools for the analysis of power transformer failures," in Cigre SC A2&D1 Joint Colloqium 2011 Proceedings, Hannover, Germany.
23. E. Gulski, J. J. Smit, P. Cichecki, F. de Vries, J. Pellis, and F. J. Wester, "Condition assessment of transmission power cables," presented at the 8th International Conference on Insulated Power Cables, Versailles, France, 2011.
24. E. Gulski, J. J. Smit, P. Cichecki, A. Rakowska, K. Siodla, and L. D. Pots, "Implementation of modern methods of on-site testing and diagnosis of hv power cables," presented at the 8th International Conference on Insulated Power Cables, Versailles, France, 2011.
25. E. Gulski, J. J. Smit, F. de Vries, and P. Cichecki, "Modern methods of installation and diagnostic testing of distribution," presented at the 8th International Conference on Insulated Power Cables, Versailles, France, 2011.
26. J. J. Smit, X. Chen, S. Meijer, and E. Gulski, "Monitoring facilities for failure rate reduction of 380 KV power cables," presented at the 8th International Conference on Insulated Power Cables, Versailles, France, 2011.
27. F. H. Kreuger, Industrial High DC Voltage. Delft, the Netherlands: Delft University Press, 1995.
28. R. Jongen, P. P. Seitz, B. Quak, F. de Vries, P. Cichecki, "New generation of on-site testing technology for transmission power cables," paper A.8.3, 8th Jicable, 2011.
29. Guide for the Evaluation of the Remaining Life of Impregnated Paper Insulated Transmission Cable Systems, IEEE 1425, 2001.
30. R. Houtepen, L. Chmura, J. J. Smit, B. Quak, P. P. Seitz, and E. Gulski, "Estimation of dielectric loss using damped AC voltages," IEEE Electr. Insul. Mag., vol. 27, no. 3, pp. 14-19, May/Jun. 2011.
31. Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above, IEEE 400, 2012.
32. Guide for Field-Testing of Shielded Power Cable Systems Rated 5 kV and Above With Damped Alternating Current Voltage (DAC) (draft under preparation), IEEE 400.4.
33. HD 632 S2 (CENELEC): Power cables with extruded insulation and their accessories for rated voltages above 36kV (Um=42kV) up to 150kV (Um= 170kV).
34. Power Cables With Extruded Insulation and the Accessories for Rated Voltages Above 30kV up to 150kV Test Methods and Requirements, IEC 60840, 2011.
35. Power Cables With Extruded Insulation and Their Accessories for Rated Voltages Above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV)- Test Methods and Requirements, IEC 62067, 2011.
36. Tests on oil-filled and gas-pressure cables and their accessories, IEC 60141, 1990.