Magnesium deterioration and lead stabilization/solidification using the toxicity characteristic leaching procedure

Environmental Progress and Sustainable Energy

Volumn 33, Issue 2, 2014, Pages 437-443

  Nicklaus, Laura E ^a   Caffaro, Mariana A ^a   Fuessle, Robert W ^a   Taylor, Max A ^a  

^a BRADLEY UNIVERSITY   (United States)

Author keywords

leaching; lead; magnesium; solidification; stabilization

Indexed keywords

CALCIUM SILICATE; CEMENTS; CORROSION; CURING; DETERIORATION; FLY ASH; LEACHING; LEAD; MAGNESIUM; SILICATE MINERALS; SOLIDIFICATION; STABILIZATION;

CALCIUM SILICATE HYDRATE; LEAD STABILIZATION; MAGNESIUM CORROSIONS; NUMBER OF SAMPLES; RECENT RESEARCHES; REGULATORY LIMIT; STABILIZATION/SOLIDIFICATION (S/S); TOXICITY CHARACTERISTIC LEACHING PROCEDURES;

MAGNESIUM COMPOUNDS;

EID: 84899079120     PISSN: 19447442     EISSN: 19447450     Source Type: Journal    
DOI: 10.1002/ep.11806     Document Type: Article

References (36)

1. "The national biennial RCRA hazardous waste report (based on 1997 data)." (1999). EPA530-S-99-036,< http://www.epa.gov/epaoswer/hazwaste/ data/br97/ >.
2. U.S. Environmental Protection Agency Technology Innovation Office. (2000). Solidification/stabilization use at superfund Sites. EPA-542-R-00-010, Washington, D.C.
3. U.S. Environmental Protection Agency Office of Solid Waste and Emergency Response. (2010). Superfund remedy report (13th Edition) Sept, Cincinnati, OH.
4. Lo, I.M.-C., Tang, C.-I., Li, X.-D., &, Poon, C.-S., (2000). Leaching and microstructural analysis of cement-based solidified wastes, Environmental Science & Technology, 34, 5038-5042.
5. Halim, C.E., Amal, R., Beydoun, D., Scott, J.A., &, Low, G., (2004). Implications of the structure of cementitious wastes containing Pb(II), Cd(II), As(V), and Cr(VI) on the leaching of metals, Cement and Concrete Research, 34, 1093-1102.
6. Olmo, I.F.,;, Chacõn, E., &, Irabien, A., (2003). Leaching behavior of lead, chromium (III), and zinc in cement/metal oxides systems, Journal of Environmental Engineering, 129, 532-538.
7. Van Der Hoek, E.E., &, Comans, R.N.J., (1996). Modeling arsenic and selenium leaching from acidic fly ash by sorption on iron (Hydr)oxide in the fly ash matrix, Environment Science & Technology, 30, 517-523.
8. Fuessle, R.W., &, Taylor, M.A., (1994). Comparison of fly ash versus silica fume stabilization long term results, Hazardous Waste and Hazardous Materials, 11, 298.
9. Fuessle, R.W., &, Taylor, M.A., (2000). Stabilization of arsenic and barium-rich glass manufacturing waste, ASCE, Journal of Environmental Engineering, 126, 272-278.
10. Piao, H., &, Bishop, P.L., (2006). Stabilization of mercury-containing wastes using sulfide, Environmental Pollution, 139, 498-506.
11. Taylor, M.A., &, Fuessle, R.W., (1994). Effects of accelerators on stabilization, Hazardous Waste and Hazardous Materials, 11, 529-539.
12. Fernández, A.I., Chimenos, J.M., Raventõs, N., Miralles, L., &, Espiell, F., (2003). Stabilization of electrical arc furnace dust with low-grade MgO prior to landfill, Journal of Environmental Engineering, 129, 275-279.
13. Stanforth, R., Yap, C.-F., &, Nayar, R., (2005). Effects of weathering on treatment of lead contaminated soils, Journal of Environmental Engineering, 131, 38-48.
14. Zhang, J., &, Bishop, P.L., (2003). Stabilization/solidification of high mercury wastes with reactivated carbon, Practice Periodical of Hazardous, Toxic and Radioactive Waste Management, 7, 31-36.
15. Fuessle, R.W., &, Taylor, M.A., (2004). Stabilization of arsenite wastes with prior oxidation, ASCE, Journal of Environmental Engineering, 130, 1063-1066.
16. Leist, M., Casey, R.J., &, Caridi, D., (2003). Evaluation of leaching tests for cement based immobilization of hazardous compounds, Journal of Environmental Engineering, 129, 637-641.
17. van Eijk, R.J., &, Brouwers, H.J.H., (1997). Study of hydrated Portland cement composition in regard to leaching resistance, Heron, 42, 215-229.
18. Aye, A.K., &, Bill, B., (1994). An electrical conductivity method for measuring the effects of additives on effective diffusivities in Portland cement pastes, Cement and Concrete Research, 24, 752-764.
19. Bishop, P.L., Gong, R., &, Keener, T.C., (1992). Effects of leaching on pore size distribution of solidified/stabilized wastes, Journal of Hazardous Materials, 31, 59-74.
20. Dusing, D.C., Bishop, P.L., &, Keener, T.C., (1992). Effect of redox potential on leaching from stabilized/solidified waste materials, Journal of the Air & Waste Management Association, 42, 56-62. ISSN 1047-3289.
21. Baker, P.G., &, Bishop, P.L., (1997). Prediction of metal leaching rates from solidified/stabilized wastes using the shrinking unreacted core leaching procedure, Journal of Hazardous Materials, 52, 311-333.
22. Park, J.Y., &, Batchelor, B., (2002). A multi-component numerical leach model coupled with a general chemical speciation code, Water Research, 36: 156-166.
23. Glasser, F.P., (1993). Chemistry of cement-solidified waste forms. In, Spence, R.D., (Ed.), Chemistry and microstructure of solidified waste forms (pp. 1-39.), Boca Raton, FL: Lewis Publishers.
24. United States Environmental Protection Agency. (1993). Technical resource document solidification/stabilization and its application to waste materials, Cincinnati, OH: EPA.
25. Perry, K.J., Prange, N.E., &, Garvey, W.F., (1992). Long-term leaching performance for commercially stabilized waste. In, T.M. Gilliam, and, C.C. Wiles, (Eds.), Stabilization and solidification of hazardous, radioactive and mixed wastes (2nd Volume, pp. 242-251), ASTM STP 1123, Philadelphia: American Society for Testing and Materials.
26. Fuessle, R., &, Taylor, M., (2008). Error analyses of S/S using the TCLP test, The 24th Annual International Convference on Soils, Sediments and Water, University of Massachusetts, Amherst, MA., Oct. 20-23.
27. Bonen, D., &, Cohen, M.D., (1992). Magnesium sulfate attack on portland cement paste. I. Microstructural analysis, Cement and Concrete Research, 22: 169-180.
28. Al-Moudi, O.S.B., Maslehuddin, M., &, Saadi, M., (1995). Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements, ACI Materials Journal, 92, 15-24.
29. Ali, M., &, Mullick, A., (1998). Volume stabilisation of high MgO cement: Effect of curing conditions and fly ash addition, Cement and Concrete Research, 28, 1585-1594.
30. Roy, A., Eaton, H.C., Cartledge, F.K., &, Tittlebaum, M.E., (1992). The effect of sodium sulfate on solidification/stabilization of a synthetic electroplating sludge in cementitious binders, Journal of Hazardous Materials, 30, 297-316.
31. Bayasi, Z., Fuessle, R., Taylor, M., &, LaPayne, J., (1992). Improvements in the solidification of hazardous inorganic wastes by silica fume concrete, Final Report. 1 Hazelwood Drive, Champaign: Hazardous Waste Research and Information Center (now Illinois Sustainable Technology Center): IL 61820.
32. U.S. EPA. (1987). Test methods for evaluating solid waste, physical/chemical methods, SW 846, Sept. 1986, revised Dec. 1987, Washington, DC.
33. Glasser, F.P., (1997). Fundamental aspects of cement solidification and stabilisation, Journal of Hazardous Materials, 52, 151-170.
34. Shahwan, T., Zunbul, B., Eroglu, A.E., &, Yilmaz, S., (2005). Effect of magnesium carbonate on the uptake of aqueous zinc and lead ions by natural kaolinite and clinoptilolite, Applied Clay Science, 30, 209-218.
35. 2+ ion on dolomite powder, Journal of hazardous Materials, Elsevier, 167, 1044-1049.
36. Vega, F.A., Cevelo, E.F., &, Andrade, M.L., (2009). The role of cation exchange in the sorption of cadmium, copper, and lead by soils saturated with magnesium, Journal of Hazardous Materials, 171, 262-267.