Effects of foam agent on characteristics of thin-film transistor liquid crystal display waste glass-metakaolin-based cellular geopolymer

Environmental Progress and Sustainable Energy

Volumn 33, Issue 2, 2014, Pages 538-550

  Shiu, Hau Shing ^a   Lin, Kae Long ^a   Chao, Sao Jeng ^a   Hwang, Chao Lung ^b   Cheng, Ta Wui ^c  

^a NATIONAL ILAN UNIVERSITY   (Taiwan)

^b NATIONAL TAIWAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Taiwan)

^c NATIONAL TAIPEI UNIVERSITY OF TECHNOLOGY   (Taiwan)

Author keywords

cellular geopolymer; fire resistance; metakaolin; thin film transistor liquid crystal display; waste glass

Indexed keywords

COMPRESSIVE STRENGTH; FIRE RESISTANCE; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GEOPOLYMERS; GLASS; INORGANIC POLYMERS; LIGHT WEIGHT CONCRETE; LIQUID CRYSTAL DISPLAYS; SCANNING ELECTRON MICROSCOPY; THIN FILM TRANSISTORS;

FOAM AGENTS; GEOPOLYMER; MECHANICAL CHARACTERIZATIONS; METAKAOLINS; PORE VOLUME; THERMAL TRANSFER; THIN FILM TRANSISTOR LIQUID CRYSTAL DISPLAYS; WASTE GLASS;

THERMAL CONDUCTIVITY;

EID: 84899069716     PISSN: 19447442     EISSN: 19447450     Source Type: Journal    
DOI: 10.1002/ep.11798     Document Type: Article

References (30)

1. Wang, H. Y., (2009). A study of the engineering properties of waste LCD glass applied to controlled low strength materials concrete, Construction and Building Materials, 23, 2127-2131.
2. NPD DisplaySearch Quarterly LCD Glass Substrate Report http://www.displaysearch.com/cps/rde/xchg/displaysearch/hs.xsl/index.asp.
3. Temuujin, J., Rickard, W., Lee, M., &, van Riessen, A., (2011). Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings, Journal of Non-Crystalline Solids, 357, 1399-1404.
4. Hammell, J. A., Balaguru, P. N., &, Lyon, R. E., (2000). Strength retention of fire resistant aluminosilicate-carbon composites under wet-dry conditions, Composites: Part B, 31, 107-111.
5. Lyon, R. E., Balaguru, P., Foden, A., Sorathia, U., &, Davidovits, J., (1997). Fire resistant aluminosilicate composites, Fire and Materials, 21, 61-73.
6. Mehta, P. K., (2002). Greening of the concrete industry for sustainable development, Concrete International, 24, 23-28.
7. Hammell, P. N., &, Balaguru, R. E., (2000). Strength retention of fire resistant aluminosilicate-carbon composites under wet-dry conditions, Composites: Part B, 31, 107-111.
8. Temuujin, J. A., Williams, J., &, Van Riessen, R. P., (2009). Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes, Journal of Hazardous Materials, 167, 82-88.
9. Komnitsas, K., &, Zaharaki, D., (2007). Geopolymerisation: A review and prospects for the minerals industry, Minerals Engineering, 20, 1261-1277.
10. Van Jaarsveld, J. G. S., Van Deventer, J. S. J., &, Lukey, G. C., (2002). The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers, Chemical Engineering Journal, 89, 63-73.
11. Panias, D., Giannopoulou, I. P., &, Perraki, T., (2007). Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers, Colloids and Surfaces A: Physicochemical and Engineering Aspect, 301, 246-254.
12. Bakharev, T., (2005). Resistance of geopolymer materials to acid attack, Cement and Concrete Research, 35, 658-670.
13. 2O molar ratio on properties of TFT-LCD waste glass-metakaolin-based geopolymers, Environmental Progress and Sustainable Energy, DOI:10.1002/ep.11744.
14. Lin, K. L., Shiu, H. S., Shie, J. L., Cheng, T. W., &, Hwang, C. L., (2012). Effect of composition on characteristics of thin film transistor liquid crystal display (TFT-LCD) waste glass-metakaolin-based geopolymers, Construction and Building Materials, 36, 501-507.
15. U.S. EPA. (2004). Test methods for evaluating solid waste-toxicity characteristic leaching procedure. Washington, DC: U.S. EPA SW-846-1311.
16. ASTM C109/C109M-11b Standard test method for compressive strength of hydraulic cement mortars (Using 2-in. or [50-mm] Cube Specimens).
17. ASTM C348-08 Standard test method for flexural strength of hydraulic-cement mortars.
18. Davidovits, J., (1999). Fire proof geopolymer cements. Geopolymer 99 proceedings. Second International Conference, France (pp. 165-169).
19. Liu, L. P., Cui, X. M., Qiu, S. H., Yu, J. L., &, Zhang, L., (2010). Preparation of phosphoric acid-based porous geopolymers, Applied Clay Science, 50, 600-603.
20. Duxson, P., Lukey, G. C., &, van Deventer J. S. J., (2006). Thermal conductivity of metakaolin geopolymers used as a first approximation for determining gel interconnectivity, Industrial and Engineering Chemistry Research, 45, 7781-7788.
21. Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., &, van Deventer, J. S. J., (2007). Geopolymer technology: The current state of the art, Journal of Materials Science, 42, 2917-2933.
22. Cheng, T. W., &, Chiu, J. P., (2003). Fire-resistant geopolymer produced by granulated blast furnace slag, Minerals Engineering, 16, 205-210.
23. Bernal, S. A., Provis, J. L., Rose, V., &, De Gutierrez, R. M., (2005). Evolution of binder structure in sodium silicate-activated slag-metakaolin blends, Cement and Concrete Composites, 33, 46-54.
24. Tognonvi, M. T., Rossignol, S., &, Bonnet, J. P., (2011). Effect of alkali cation on irreversible gel formation in basic medium, Journal of Non-Crystalline Solids, 357, 43-49.
25. Rees, C. A., Provis, J. L., Lukey, G. C., &, van Deventer, J. S. J., (2007). Attenuated total reflectance Fourier transform infrared analysis fly ash geopolymer gel aging, Langmuir, 23, 8170-8179.
26. Uchino, T., Sakka, T., Hotta, K., &, Iwasaki, M., (1989). Attenuated total reflectance Fourier-transform infrared spectra of a hydrated sodium silicate glass, Journal of the American Ceramic Society, 72, 2173-2175.
27. Verdolotti, L., Iannace, S., Lavorgna, M., &, Lamanna, R., (2008). Geopolymerization reaction to consolidate incoherent pozzolanic soil, Journal of Materials Science, 43, 865-873.
28. Rattanasak, U., &, Chindaprasirt, P., (2010). Influence of NaOH solution on the synthesis of fly ash geopolymer, Construction and Building Materials, 24, 1176-1183.
29. Komnitsas, K., Zaharaki, D., &, Perdikatsis, V., (2009). Effect of synthesis parameters on the compressive strength of low-calcium ferronickel slag inorganic polymers, Journal of Hazardous Materials, 161, 760-768.
30. Kong, D. L. Y., Sanjayan, J. G., &, Sagoe-Crentsil, K., (2007). Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures, Cement and Concrete Research, 37, 1583-1589.