Fabrication and properties of foam geopolymer using circulating fluidized bed combustion fly ash

International Journal of Minerals, Metallurgy and Materials

Volumn 21, Issue 1, 2014, Pages 89-94

  Liu, Ze ^a   Shao, Ning Ning ^a   Wang, Dong Min ^a   Qin, Jun Feng ^a   Huang, Tian Yong ^a   Song, Wei ^a   Lin, Mu Xi ^a   Yuan, Jin Sha ^a   Wang, Zhen ^a  

^a CHINA UNIVERSITY OF MINING AND TECHNOLOGY   (China)

Author keywords

Fly ash; Foamed products; Geopolymers; Hydrogen peroxide; Microstructure

Indexed keywords

FLY ASH; FOAMED PRODUCTS; GEOPOLYMERS; HYDROGEN PEROXIDE; INORGANIC POLYMERS; MECHANICAL TESTING; MICROSTRUCTURE; PEROXIDES; SCANNING ELECTRON MICROSCOPY; SYNTHESIS (CHEMICAL); X RAY DIFFRACTION;

ALKALI REACTIONS; ALTERNATIVE SOURCE; CHEMICAL COMPOSITIONS; CIRCULATING FLUIDIZED BED COMBUSTIONS; GEOPOLYMERIZATION; MINERAL COMPOSITION; PARTICLE DISTRIBUTIONS; X RAY FLUORESCENCE;

FLUIDIZED BED COMBUSTION;

EID: 84898963556     PISSN: 16744799     EISSN: 1869103X     Source Type: Journal    
DOI: 10.1007/s12613-014-0870-4     Document Type: Article

References (28)

1. J. Davidovits, Geopolymer Chemistry and Applications, Institut Géopolymère, Saint-Quentin, 2008, p. 592.
2. H. Xu, Geopolymerisation of Alumino-Silicate Minerals [Dissertation], The University of Melbourne, Melbourne, 2002, p. 297.
3. P. Sun, Fly Ash Based Inorganic Polymeric Building Material [Dissertation], Wayne State University, Detroit, 2005, p. 216.
4. R.E. Lyon, P.N. Balaguru, A. Foden, U. Sorathia, J. Davidovits, and M. Davidovics, Fire-resistant aluminosilicate composites, Fire Mater., 21(1997), p. 67.
5. D.L.Y. Kong, J.G. Sanjayan, and K. Sagoe-Crentsil, Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures, Cem. Concr. Res., 37(2007), p. 1583.
6. H. Xu and J.S.J. van Deventer, The geopolymerisation of alumino-silicate minerals, Int. J. Miner. Process., 59(2000), p. 247.
7. H. Xu and J.S.J. van Deventer, Geopolymerisation of multiple minerals, Miner. Eng., 15(2002), p. 1131.
8. H. Xu and J.S.J. van Deventer, The effect of alkali metals on the formation of geopolymeric gels from alkali-feldspars, Colloids Surf. A, 216(2003), p. 27.
9. P. Duxson, G.C. Lukey, and S.J. van Deventer, Thermal conductivity of metakaolin geopolymers used as a first approximation for determining gel interconnectivity, Ind. Eng. Chem. Res., 45(2006), No. 23, p. 7781.
10. M. Hu, X. Zhu, and F. Long, Alkali-activated fly ash-based geopolymers with zeolite or bentonite as additives. Cem. Concr. Compos., 31(2009), p. 762.
11. P. Chindaprasirt, C. Jaturapitakkul, W. Chalee, and U. Rattanasak, Comparative study on the characteristics of fly ash and bottom ash geopolymers, Waste Manage., 29(2009), p. 539.
12. J.E. Oh, P.J.M. Monteiro, S.S. Jun, S. Choi, and S.M. Clark, The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers, Cem. Concr. Res., 40(2010), p. 189.
13. P. Sukmak, S. Horpibulsuk, and S.L. Shen, Strength development in clay-fly ash geopolymer, Constr. Build. Mater., 40(2013), p. 566.
14. W.D.A. Rickard, R. Williams, J. Temuujin, and A.V. Riessen, Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications, Mater. Sci. Eng. A, 528(2011), p. 3390.
15. Y.L. Zhao, J.W. Ye, X.B. Lu, M.G. Liu, Y. Lin, W.T. Gong, and G.L. Ning, Preparation of sintered foam materials by alkali-activated coal fly ash, J. Hazard. Mater., 174(2010), p. 108.
16. W.D.A. Rickard, L. Vickers, and A. van Riessen, Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions, Appl. Clay Sci., 73(2013), p. 71.
17. E. Prud'homme, P. Michaud, E. Joussein, J.M. Clacens, and S. Rossignol, Role of alkaline cations and water content on geomaterial foams: monitoring during formation, J. Non Cryst. Solids, 357(2011), p. 1270.
18. J.L. Bell and W.M. Kriven, Preparation of ceramic foams from metakaolin-based geopolymer gels, Ceram. Eng. Sci. Proc., 29(2009), No. 10, p. 97.
19. E. Álvarez-Ayuso, X. Querol, F. Plana, A. Alastuey, N. Moreno, M. Izquierdo, O. Font, T. Moreno, S. Diez, E. Vazquez, and M. Barra, Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-)combustion fly ashes, J. Hazard. Mater., 154(2008), p. 175.
20. T. Bakharev, Geopolymeric materials prepared using Class F fly ash and elevated temperature curing, Cem. Concr. Res., 35(2005), p. 1224.
21. M. Criado, A. Fernández-Jiménez, A.G. de la Torre, M.A.G. Aranda, and A. Palomo, An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash, Cem. Concr. Res., 37(2007), p. 671.
22. Y. Fang and O. Kayali, The fate of water in fly ash-based geopolymers, Constr. Build. Mater., 39(2013), p. 89.
23. Q. Li, H. Xu, F.H. Li, P.M. Li, L.F. Shen, and J.P. Zhai, Synthesis of geopolymer composites from blends of CFBC fly and bottom ashes, Fuel, 97(2012), p. 366.
24. P. Chindaprasirt and U. Rattanasak, Utilization of blended fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash in geopolymer, Waste Manage., 30(2010), p. 667.
25. J.L. Provis, P. Duxson, J.S.J. van Deventer, and G.C. Lukey, The role of mathematical modelling and gel chemistry in advancing geopolymer technology, Chem. Eng. Res. Des., 83(2005), No. 7, p. 853.
26. J.G.S. van Jaarsveld, J.S.J. van Deventer, and G.C. Lukey, The effect of composition and temperature on the properties of fly ash-and kaolinite-based geopolymers, Chem. Eng. J., 89(2002), p. 63.
27. K. Komnitsas and D. Zaharaki, Geopolymerisation: a review and prospects for the minerals industry, Miner. Eng., 20(2007), p. 1261.
28. J.L. Provis and J.S.J. van Deventer, Direct measurement of the kinetics of geopolymerisation by in-situ energy dispersive X-ray diffractometry, J. Mater. Sci., 42(2007), No. 9, p. 2974.