Value-added biopolymer nanocomposites from waste eggshell-based CaCO 3 nanoparticles as fillers

ACS Sustainable Chemistry and Engineering

Volumn 2, Issue 4, 2014, Pages 706-717

  Hassan, Tarig A ^a   Rangari, Vijaya K ^a   Jeelani, Shaik ^a  

^a TUSKEGEE UNIVERSITY   (United States)

Author keywords

Biodegradable polymers; Calcium carbonate; Mechanical properties; Nanocomposites; Renewable materials

Indexed keywords

BIODEGRADABLE POLYMERS; CALCIUM CARBONATE; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; MECHANICAL PROPERTIES; NANOCOMPOSITES; NANOPARTICLES; THERMOANALYSIS; ULTRASONIC TESTING;

BIO-NANOCOMPOSITE; BIONANOCOMPOSITES; HIGH SURFACE AREA; RENEWABLE MATERIALS; SYNTHESIS PROCESS; THERMOPLASTIC POLYMER; ULTRASOUND IRRADIATION; WEIGHT PERCENTAGES;

SYNTHESIS (CHEMICAL);

EID: 84897986232     PISSN: None     EISSN: 21680485     Source Type: Journal    
DOI: 10.1021/sc400405v     Document Type: Article

References (56)

1. Avella, M.; Buzarovska, A.; Errico, M.; Gentile, G.; Grozdanov, A. Eco-challenges of bio-based polymer composites Materials 2009, 2, 911-925
2. Adeosun, S.; Lawal, G.; Balogun, S.; Akpan, E. Review of green polymer nanocomposites J. Miner. Mater. Charact. Eng. 2012, 11 (4) 385-416
3. Masoodi, R.; El-Hajjar, R.; Pillai, K.; Sabo, R. Mechanical characterization of a cellulose nanofiber and bio-based epoxy composite Mater. Des. 2012, 36, 570-576
4. Campanella, A.; La Scala, J.; Wool, R. Fatty acid based comonomers as styrene replacements in soybean and castor oil based thermosetting polymers J. Appl. Polym. Sci. 2011, 119, 1000-1010
5. Senoz, E.; Stanzione, J.; Reno, K.; Wool, R.; Miller, M. Pyrolyzed chicken feather fibers for biobased composite reinforcement J. Appl. Polym. Sci. 2013, 128 (2) 983-989
6. Mingjiang, Z.; Wool, R. Thermal expansivity of chicken feather fiber reinforced epoxy composites J. Appl. Polym. Sci. 2013, 128 (2) 997-1003
7. Lu, D.; Xiao, C.; Xu, S. Starch-based completely biodegradable polymer materials eXPRESS Polym. Lett. 2009, 3 (6) 366-375
8. Soares, F.; Yamashita, F.; Müller, C.; Pires, A. Thermoplastic starch/poly(lactic acid) sheets coated with cross-linked chitosan Polym. Test. 2013, 32, 94-98
9. Gwon, J.; Lee, S.; Chun, S.; Doh, G.; Kim, J. Effects of chemical treatments of hybrid fillers on the physical and thermal properties of wood plastic composites Composites, Part A 2010, 41, 1491-1497
10. Rosch, J.; Mulhaupt, R. Polymers from renewable resoureces: Polyester resins and blends based upon anhydride-cured epoxidized soybean oil Polym. Bull. 1993, 31, 679-685
11. Erkske, D.; Viskere, I.; Dzene, A.; Tupureina, V.; Savenkova, L. Biobased polymer composites for films and coatings Proc. Est. Acad. Sci., Chem. 2006, 55 (2) 70-77
12. Rodriguez, C.; Medina, J.; Reinecke, H. New thermoplastic materials reinforced with cellulose based fibers J. Appl. Polym. Sci. 2003, 90 (13) 3466-3472
13. Wool, R.; Schiltz, D.; Steiner, D. Injection Moldable Biodegradable Starch Polymer Composites. U.S. Patent 5,162,392. 1992.
14. Wool, R.; Kusefoglu, S.; Zhao, R.; Palmese, G.; Khot, S. High Modulus Polymers and Composites from Plant Oils. U.S. Patent 6,121,398, 2000.
15. Wool, R.; Bunker, S. P. Pressure Sensitive Adhesives from Plant Oils. U.S. Patent 6,646,033, 2003.
16. Wool, R.; Lu, J.; Khot, S. N. Sheet Molding Compound from Plant Oils. U.S. Patent 6,900,261, 2005.
17. Lin, Z.; Guan, Z.; Chen, C.; Cao, L.; Wang, Y.; Gao, S.; Xu, B.; Li, W. Preparation, structures and properties of shell/polypropylene biocomposites Thermochim. Acta 2013, 551, 149-154
18. Toro, P.; Quijada, R.; Arias, J.; Yazdani-Pedram, M. Mechanical and morphological studies of poly(propylene)-filled eggshell composites Macromol. Mater. Eng. 2007, 292 (9) 1027-1034
19. Toro, P.; Quijada, R.; Yazdani, P.; Mehrdad, A.; Arias, J. L. Eggshell, a new biofiller for polypropylene composites Mater. Lett. 2007, 61 (22) 4347-4350
20. Arias, J.; Quijada, R.; Toro, P.; Yazdani, P. Polypropylene Composites with Reinforcement Based on Eggshells. U.S. Patent 7,459,492 B2, 2008.
21. Ji, G.; Zhu, H.; Qi, C.; Zeng, M. Mechanism of interactions of eggshell microparticles with epoxy resin Polym. Eng. Sci. 2009, 49 (7) 1383-1388
22. Kang, D.; Pal, K.; Park, S.; Bang, D.; Kim, J. Effect of eggshell and silk fibroinon styrene-ethylene/butylene-styrene as bio-filler Mater. Des. 2010, 31 (4) 2216-2219
23. Tsai, W.; Yang, J.; Hsu, H.; Lin, C.; Lin, K.; Chiu, C. Development and characterization of mesoporosity in eggshell ground by planetary ball Milling Microporous Mesoporous Mater. 2008, 111, 379-386
24. Arias, J.; Fink, D.; Xiao, S.; Heuer, A.; Caplan, A. Biomineralization and eggshells: Cell-mediated a cellular compartments of mineralized extracellular matrix Int. Rev. Cytol. 1993, 145, 217-250
25. Arias, J.; Fernandez, M. Biomimetic processes through the study of mineralized shells Mater. Charact. 2003, 50, 189-195
26. Lammie, D.; Baina, M.; Wess, T. Microfocus X-ray scattering investigations of eggshell nanotexture J. Synchrotron Radiat. 2005, 12, 721-726
27. 3/soybean-based hybrid unsaturated polyester nanocomposites J. Appl. Polym. Sci. 2013, 130, 1442-1452
28. Takamine, K.; Bhatnagar, S.; Hanna, M. Effect of eggshell on properties of corn starch extrudates Cereal Chem. 1995, 72 (4) 385-388
29. Xu, Y.; Hanna, M. Effect of eggshell powder as nucleating agent on the structure, morphology and functional properties of normal corn starch foams Packag. Technol. Sci. 2007, 20, 165-172
30. Bootklad, M.; Kaewtatip, K. Biodegradation of thermoplastic starch/eggshell powder composites Carbohydr. Polym. 2013, 97, 315-320
31. Barber, B.; Putterman, S. Spectrum of synchronous picosecond sonoluminescence Phys. Rev. Lett. 1992, 69, 1182-1184
32. Suslick, K. The Mechanochemical Effects of Ultrasound; Proc. First Intl. Conf. Mechanochemistry, Cambridge Interscience: Cambridge, 1994, vol. 1, pp 43-49.
33. Franco, F.; Perez-Maqueda, L.; Perez-Rodriguez, J. The influence of ultrasound on the thermal behaviour of a well ordered kaolinite Thermochim. Acta 2003, 404, 71-79
34. Franco, F.; Perez-Maqueda, L.; Perez-Rodriguez, J. The effect of ultrasound on the particle size and structural disorder of a well-ordered kaolinite J. Colloid Interface Sci. 2004, 274, 107-117
35. Franco, F.; Perez-Maqueda, L.; Perez-Rodriguez, L. Influence of the particle-size reduction by ultrasound treatment on the dehydroxylation process of kaolinites J. Therm. Anal. Calorim. 2004, 78, 1043-1055
36. Suslick, K.; Didenko, Y.; Fang, M.; Hyeon, T.; Kolbeck, K.; McNamara, W., III; Mdleleni, M.; Wong, M. Acoustic cavitation and its chemical consequences Philos. Trans. R. Soc., A 1999, 357, 335-353
37. Misik, V.; Kirschenbaum, L. J.; Riesz, P. Free radical production by sonolysis of aqueous mixtures of N,N-dimethylformamide: An EPR spin trapping study J. Phys. Chem. 1995, 99, 5970
38. Vijaya Kumar, R.; Diamant, Y.; Gedanken, A. Sonochemical synthesis and characterization of nanometersize-size transition metal oxides from metal acetates Chem. Mater. 2000, 12, 2301-2305
39. 3 nanoparticles derived from waste eggshells Ultrason. Sonochem. 2013, 20, 1308-1315
40. 3 nanoparticles by ultrasound irradiation and its applications in structural nanocomposites Compos. Sci. Technol. 2009, 69, 2293-2300
41. Cheremisinoff, N. Polymer Mixing and Extrusion Technology; Marcel Dekker, Inc.: New York: 1987.
42. Lee, J.; Ashokumar, M.; Kentish, S.; Grieser, F. Effect of alcohols on the initial growth of multibubble sonoluminescence J. Phys. Chem. B 2006, 110, 17282-17285
43. 4/MWCNTs)/ epoxy nanocomposites J. Appl. Polym. Sci. 2010, 116, 2783-2792
44. Cheung, H. Y.; Lau, K. T.; Tao, X. M.; Hui, D. A potential material for tissue engineering: Silkworm silk/PLA Biocomposite Composites, Part B 2008, 39, 1026-1033
45. Loera, A. G.; Cara, F.; Dumon, M.; Pascault, J. P. Porous epoxy thermosets obtained by a polymerization-induced phase separation process of a degradable thermoplastic polymer Macromolecules 2002, 35, 6291-6297
46. Signori, F.; Coltelli, M. B.; Bronco, S. Thermal degradation of poly(lactic acid) and poly(butylenesadipate-co-terephthalate) and their blends upon melt processing Polym. Degrad. Stab. 2009, 94, 74-82
47. Yang, S.; Wu, Z. H.; Yang, W.; Yang, M. B. Thermal and mechanical properties of chemical crosslinked polylactide (PLA) Polymer Testing. 2008, 27, 957-963
48. Ray, S.; Okamoto, K.; Okamoto, M. Structure-property relationship in biodegradable poly(butylene succinate)/layered silicate nanocomposites Macromolecules 2003, 36, 2355-2367
49. Huda, M. S.; Drzal, L. T.; Mohanty, A. K.; Misra, M. Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: A comparative study Compos. Sci. Technol. 2006, 66, 1813-1824
50. Rana, A. K.; Mitra, B. C.; Banerjee, A. N. Short jute fiber-reinforced polypropylene composites: Dynamic mechanical study J. Appl. Polym. Sci. 1999, 71 (4) 531-539
51. Nielsen, L.; Landel, R. Mechanical Properties of Polymers and Composites; Marcel Decker, Inc,.: New York. 1994.
52. Wang, S. F.; Shen, L.; Zhang, W. D.; Tong, Y. J. Preparation and mechanical properties of chitosan/carbon nanotubes composites Biomacromolecules 2005, 6 (6) 3067-3072
53. Xu, C.; Jia, Z.; Wu, D.; Han, Q.; Meek, T. Fabrication of nylon-6/carbon nanotube composites J. Electron. Mater. 2006, 35 (5) 954-957
54. Xu, M.; Zhang, T.; Gu, B.; Wu, J.; Chen, Q. Synthesis and properties of novel polyurethane/MWCNT composites Macromolecules 2006, 39 (10) 3540-3545
55. Meincke, O.; Kaempfer, D.; Weickmann, H.; Friedrich, C.; Vathauer, M.; Warth, H. Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene Polymer 2004, 45 (3) 739-748
56. Zhang, M.; Zeng, H.; Zhang, L.; Lin, G.; Li, R. Fracture characteristics of discontinuous carbon fibre-reinforced PPS and PES-C composites Polym. Polym. Compos. 1993, 1, 357-365