Porogen templating processes: An overview

Journal of Manufacturing Science and Engineering

Volumn 136, Issue 3, 2014, Pages

  Hong, Yifeng ^a   Zhou, Jack ^b   Yao, Donggang ^a  

^a Georgia Institute of Technology   (United States)

^b Drexel University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMEDICAL MATERIALS; MOLDING; MOLDS;

BUILDING BLOCKES; CONSTITUENT ELEMENTS; CONVENTIONAL METHODS; EMERGING APPLICATIONS; INTERNAL STRUCTURE; MORPHOLOGICAL CONTROL; STATE OF THE ART; WORKING MECHANISMS;

POROUS MATERIALS;

EID: 84897451321     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.4026899     Document Type: Review

References (158)

1. Dhandayuthapani, B., Yoshida, Y., Maekawa, T., and Kumar, D. S., 2011, "Polymeric Scaffolds in Tissue Engineering Application: A Review," Int. J. Polym. Sci. http://dx.doi.org/10.1155/2011/290602, 2011, p. 290602.
2. Landy, B. C., Van Gordon, S. B., McFetridge, P. S., Sikavitsas, V. I., and Jarman-Smith, M., 2013, "Mechanical and in vitro Investigation of a Porous PEEK Foam for Medical Device Implants," J. Appl. Biomater. Funct. Mater. http://dx.doi.org/10.5301/JABFM.2012.9771, 11(1), pp. 35-44.
3. Liu, Z. H., Yi, Y., Gauczinski, J., Xu, H. P., Schonhoff, M., and Zhang, X., 2011, "Surface Molecular Imprinted Layer-by-Layer Film Attached to a Porous Membrane for Selective Filtration," Langmuir, http://dx.doi.org/10. 1021/la202093s 27(19), pp. 11806-11812.
4. Garcia-Belmonte, G., Bisquert, J., Pereira, E. C., and Fabregat-Santiago, F., 2001, "Anomalous Transport on Polymeric Porous Film Electrodes in the Dopant-Induced Insulator-to-Conductor Transition Analyzed by Electrochemical Impedance," Appl. Phys. Lett. http://dx.doi.org/10.1063/1.1354671, 78(13), pp. 1885-1887. (Pubitemid 33664362)
5. Fritz Ullmann, W. G., Yamamoto, Y. S., Campbell, F. T., 1985, Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, Germany.
6. Mark, H. F., and Kroschwitz, J. I., 1985, Encyclopedia of Polymer Science and Engineering," 2nd ed., Wiley, New York.
7. Sharma, A. C., and Borovik, A. S., 2000, "Design, Synthesis, and Characterization of Templated Metal Sites in Porous Organic Hosts: Application to Reversible Dioxygen Binding," J. Am. Chem. Soc. http://dx.doi.org/10. 1021/ja0014739, 122(37), pp. 8946-8955.
8. Lu, W. G., Yuan, D. Q., Zhao, D., Schilling, C. I., Plietzsch, O., Muller, T., Brase, S., Guenther, J., Blumel, J., Krishna, R., Li, Z., and Zhou, H. C., 2010, "Porous Polymer Networks: Synthesis, Porosity, and Applications in Gas Storage/Separation," Chem. Mater. http://dx.doi.org/10. 1021/cm1021068, 22(21), pp. 5964-5972.
9. Simms, H. M., Brotherton, C. M., Good, B. T., Davis, R. H., Anseth, K. S., and Bowman, C. N., 2005, "In Situ Fabrication of Macroporous Polymer Net-works Within Microfluidic Devices by Living Radical Photopolymerization and Leaching," Lab Chip http://dx.doi.org/10.1039/b412589d, 5(2), pp. 151-157. (Pubitemid 40260856)
10. Hutmacher, D. W., 2001, "Scaffold Design and Fabrication Technologies for Engineering Tissues-State of the Art and Future Perspectives," J. Biomater. Sci., Polym. Ed. http://dx.doi.org/10.1163/ 156856201744489, 12(1), pp. 107-124. (Pubitemid 32335467)
11. Yan, X., and Gu, P., 1996, "A Review of Rapid Prototyping Technologies and Systems," Comput.-Aided Des. http://dx.doi.org/10.1016/ 0010-4485(95)00035-6, 28(4), pp. 307-318. (Pubitemid 126403899)
12. Medellin-Castillo, H. I., and Torres, J. E. P., 2010, "Rapid Prototyping and Manufacturing: A Review of Current Technologies," IMECE2009, Vol. 4, pp. 609-621.
13. Lan, H., 2009, "Web-Based Rapid Prototyping and Manufacturing Systems: A Review," Comput. Ind. http://dx.doi.org/10.1016/j.compind.2009. 05.003, 60(9), pp. 643-656.
14. Yang, D. Y., Lim, T. W., Son, Y., Kong, H. J., Lee, K. S., Kim, D. P., and Park, S. H., 2007, "Additive Process Using Femto-Second Laser for Manufacturing Three-Dimensional Nano/Micro-Structures," Int. J. Precis. Eng. Manuf., 8(4), pp. 63-69.
15. Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., and Kellomaki, M., 2008, "A Review of Rapid Prototyping Techniques for Tissue Engineering Purposes," Ann. Med. http://dx.doi.org/10.1080/07853890701881788, 40(4), pp. 268-280. (Pubitemid 351563939)
16. Mondrinos, M. J., Dembzynski, R., Lu, L., Byrapogu, V. K. C., Wootton, D. M., Lelkes, P. I., and Zhou, J., 2006, "Porogen-Based Solid Freeform Fabrication of Polycaprolactone-Calcium Phosphate Scaffolds for Tissue Engineering," Biomaterials http://dx.doi.org/10.1016/j.biomaterials.2006. 03.049, 27(25), pp. 4399-4408.
17. Lu, L., Zhou, J., Mondrinos, M., Lelkes, P., and Wootton, D., 2008, Porogen Based Solid Freeform Fabrication of Polycaprolactone-Calcium Phosphate Scaffolds for Tissue Engineering, Virtual Rapid Manufacturing, Taylor and Francis, London, pp. 87-96.
18. Kang, H. W., and Cho, D. W., 2012, "Development of an Indirect Stereolithography Technology for Scaffold Fabrication With a Wide Range of Biomaterial Selectivity," Tissue Eng. Part C http://dx.doi.org/10.1089/ten. tec.2011.0621, 18(9), pp. 719-729.
19. Hollister, S. J., Maddox, R. D., and Taboas, J. M., 2002, "Optimal Design and Fabrication of Scaffolds to Mimic Tissue Properties and Satisfy Biological Constraints," Biomaterials http://dx.doi.org/10.1016/S0142- 9612(02)00148-5, 23(20), pp. 4095-4103. (Pubitemid 34765701)
20. Lee, M., Dunn, J. C. Y., and Wu, B. M., 2005, "Scaffold Fabrication by Indirect Three-Dimensional Printing," Biomaterials http://dx.doi.org/10. 1016/j.biomaterials.2004.10.040, 26(20), pp. 4281-4289. (Pubitemid 40430856)
21. Taboas, J. M., Maddox, R. D., Krebsbach, P. H., and Hollister, S. J., 2003, "Indirect Solid Free Form Fabrication of Local and Global Porous, Biomi-metic and Composite 3D Polymer-Ceramic Scaffolds," Biomaterials http://dx.doi.org/10.1016/S0142-9612(02)00276-4, 24(1), pp. 181-194. (Pubitemid 35303368)
22. Hong, Y., Zhou, J. G., and Yao, D., 2013, "Fabrication of Interconnected Porous Elastomers by A Microspherelating Process," Adv. Polym. Technol. http://dx.doi.org/10.1002/adv.21330, 31(1), pp. 21330-21341.
23. Uchida, T., Oura, H., Ikeda, S., Arai, F., Negor, M., and Fukuda, T., 2008, "Fabrication of Biodegradable Scaffolds by Use of Self-Assembled Magnetic Sugar Particles as a Casting Template," 2008 IEEE International Conference on Robotics and Automation, Vols. 1-9, pp. 413-418.
24. Esposito, E., Cortesi, R., and Nastruzzi, C., 1996, "Gelatin Microspheres: Influence of Preparation Parameters and Thermal Treatment on Chemico-Physical and Biopharmaceutical Properties," Biomaterials http://dx.doi.org/10.1016/0142-9612(95)00325-8, 17(20), pp. 2009-2020. (Pubitemid 26328942)
25. Blaker, J. J., Knowles, J. C., and Day. R. M., 2008, "Novel Fabrication Techniques to Produce Microspheres by Thermally Induced Phase Separation for Tissue Engineering and Drug Delivery," Acta Biomater. http://dx.doi.org/10.1016/j.actbio.2007.09.011, 4(2), pp. 264-272. (Pubitemid 351218102)
26. Giannatsis, J., and Dedoussis, V., 2009, "Additive Fabrication Technologies Applied to Medicine and Health Care: A Review," Int. J. Adv. Manuf. Tech-nol. http://dx.doi.org/10.1007/s00170-007-1308-1, 40(1-2), pp. 116-127.
27. Tadmor, Z., 2002, "Machine Invention, Innovation, and Elementary Steps," Adv. Polym. Technol. http://dx.doi.org/10.1002/adv.10018, 21(2), pp. 87-97.
28. Seol, Y. J., Kang, T. Y., and Cho, D. W., 2012, "Solid Freeform Fabrication Technology Applied to Tissue Engineering With Various Biomaterials," Soft Matter http://dx.doi.org/10.1039/c1sm06863f, 8(6), pp. 1730-1735.
29. Liu, C., Xia, Z., and Czernuszka J. T., 2007, "Design and Development of Three-Dimensional Scaffolds for Tissue Engineering," Chem. Eng. Res. Des. http://dx.doi.org/10.1205/cherd06196, 85(A7), pp. 1051-1064. (Pubitemid 47241501)
30. Weigel, T., Schinkel, G., and Lendlein, A., 2006, "Design and Preparation of Polymeric Scaffolds for Tissue Engineering," Expert Rev. Med. Devices http://dx.doi.org/10.1586/17434440.3.6.835, 3(6), pp. 835-851. (Pubitemid 46017623)
31. Zhou, J. G., and Lu, L., 2011, "Biomimetic Structured Porogen Freeform Fabrication System for Tissue Engineering," On Biomimetics, L. D. Pramatarova, ed., InTech., Rijeka, Croatia, pp. 53-90.
32. Sachlos, E., Reis, N., Ainsley, C., Derby, B., and Czernuszka, J. T., 2003, "Novel Collagen Scaffolds With Predefined Internal Morphology Made by Solid Freeform Fabrication," Biomaterials http://dx.doi.org/10.1016/S0142- 9612(02)00528-8, 24(8), pp. 1487-1497. (Pubitemid 36069115)
33. Yeong, W. Y., Chua, C. K., Leong, K. F., Chandrasekaran, M., and Lee, M. W., 2006, "Indirect Fabrication of Collagen Scaffold Based on Inkjet Printing Technique," Rapid Prototyping J. http://dx.doi.org/10.1108/ 13552540610682741, 12(4), pp. 229-237. (Pubitemid 44156099)
34. Lu, L., Zhang, Q. W., Wootton, D., Lelkes, P. I., and Zhou, J., 2010, "A Novel Sucrose Porogen-Based Solid Freeform Fabrication System for Bone Scaffold Manufacturing," Rapid Prototyping J. http://dx.doi.org/10.1108/ 13552541011065768, 16(5), pp. 365-376.
35. Lu, L., Zhang, Q. W., Wootton, D., Chiou, R., Li, D. C., Lu, B. H., Lelkes, P., and Zhou, J., 2012, "Biocompatibility and Biodegradation Studies of PCL/beta-TCP Bone Tissue Scaffold Fabricated by Structural Porogen Method," J. Mater. Sci.: Mater. Med. http://dx.doi.org/10.1007/s10856-012- 4695-2, 23(9), pp. 2217-2226.
36. Kawata, S., Sun, H. B., Tanaka, T., and Takada, K., 2001, "Finer Features for Functional Microdevices-Micromachines can be Created With Higher Resolution Using Two-Photon Absorption," Nature http://dx.doi.org/10.1038/ 35089130, 412(6848), pp. 697-698.
37. Lee, S. H., Moon, J. J., and West, J. L., 2008, "Three-Dimensional Micropatterning of Bioactive Hydrogels via Two-Photon Laser Scanning Photolithography for Guided 3D Cell Migration," Biomaterials http://dx.doi.org/10.1016/j.biomaterials.2008.04.004, 29(20), pp. 2962-2968.
38. Tanodekaew, S., Channasanon, S., Kaewkong, P., and Uppanan, P., 2013, "PLA-HA Scaffolds, Preparation and Bioactivity," 3rd International Conference on Tissue Engineering, P. Bartolo and P. Fernandes, eds., Elsevier Science Bv, Amsterdam, pp. 144-149.
39. Melissinaki, V., Gill, A. A., Ortega, I., Vamvakaki, M., Ranella, A., Haycock, J. W., Fotakis, C., Farsari, M., and Claeyssens, F., 2011, "Direct Laser Writing of 3D Scaffolds for Neural Tissue Engineering Applications," Biofabrication. http://dx.doi.org/10.1088/1758-5082/3/4/045005, 3(4), p. 045005.
40. Malinauskas, M., Danilevicius, P., Baltriukiene, D., Rutkauskas, M., Zukaus-kas, A., Kairyte, Z., Bickauskaite, G., Purlys, V., Paipulas, D., Bukelskiene, V., and Gadonas, R., 2010, "3D Artificial Polymeric Scaffolds for Stem Cell Growth Fabricated by Femtosecond Laser," Lithuanian J. Phys. http://dx.doi.org/10.3952/lithjphys.50121, 50(1), pp. 75-82.
41. Engelhardt, S., Hoch, E., Borchers, K., Meyer, W., Kruger, H., Tovar, G. E. M., and Gillner, A., 2011, "Fabrication of 2D Protein Microstructures and 3D Polymer-Protein Hybrid Microstructures by Two-Photon Polymerization, " Biofabrication http://dx.doi.org/10.1088/1758-5082/3/2/025003, 3(2), p. 025003.
42. Lee, S. J., Kang, H. W., Park, J. K., Rhie, J. W., Hahn, S. K., and Cho, D. W., 2008, "Application of Microstereolithography in the Development of Three-Dimensional Cartilage Regeneration Scaffolds," Biomed. Microdevices http://dx.doi.org/10.1007/s10544-007-9129-4, 10(2), pp. 233-241. (Pubitemid 351337926)
43. Johnson, D. W., Sherborne, C., Didsbury, M. P., Pateman, C., Cameron, N. R., and Claeyssens, F., 2013, "Macrostructuring of Emulsionlated Porous Polymers by 3D Laser Patterning," Adv. Mater. http://dx.doi.org/10.1002/ adma.201300552, 25(23), pp. 3178-3181.
44. Ronca, A., Ambrosio, L., and Grijpma, D. W., 2013, "Preparation of Designed Poly(D,L-Lactide)/Nanosized Hydroxyapatite Composite Structures by Stereolithography," Acta Biomater. http://dx.doi.org/10.1016/j.actbio.2012. 12.004, 9(4), pp. 5989-5996.
45. Liska, R., Schwager, F., Maier, C., Cano-Vives, R., and Stampfl, J., 2005, "Water-Soluble Photopolymers for Rapid Prototyping of Cellular Materials," J. Appl. Polym. Sci. http://dx.doi.org/10.1002/app.22025, 97(6), pp. 2286-2298. (Pubitemid 41366532)
46. Chu, T. M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., and Halloran, J. W., 2002, "Mechanical and in vivo Performance of Hydroxyapatite Implants With Controlled Architectures," Biomaterials http://dx.doi.org/10.1016/S0142-9612(01)00243-5, 23(5), pp. 1283-1293. (Pubitemid 34112425)
47. Chu, T. M. G., Halloran, J. W., Hollister, S. J., and Feinberg, S. E., 2001, "Hydroxyapatite Implants With Designed Internal Architecture," J. Mater. Sci.: Mater. Med. http://dx.doi.org/10.1023/A:1011203226053, 12(6), pp. 471-478. (Pubitemid 32612613)
48. Li, X., Li, D. C., Lu, B. H., Tang, Y. P., Wang, L., and Wang, Z., 2005, "Design and Fabrication of CAP Scaffolds by Indirect Solid Free Form Fabrication," Rapid Prototyping J. http://dx.doi.org/10.1108/ 13552540510623639, 11(5), pp. 312-318. (Pubitemid 41563681)
49. Vacanti, J. P., Sodian, R., Sperling, J. S., Martin, D. P., Egozy, A., Stock, U., and Mayer, J. E., 2000, "Fabrication of a Trileaflet Heart Valve Scaffold From a Polyhydroxyalkanoate Biopolyester for Use in Tissue Engineering," Tissue Eng. http://dx.doi.org/10.1089/107632700750022116, 6(2), pp. 183-188. (Pubitemid 30227173)
50. Leung, L., Chan, C., Baek, S., and Naguib, H., 2008, "Comparison of Morphology and Mechanical Properties of PLGA Bioscaffolds," Biomed. Mater. http://dx.doi.org/10.1088/1748-6041/3/2/025006, 3(2), p. 025006.
51. Wagner, W. R., Baraniak, P. R., Nelson, D. M., Leeson, C. E., Katakam, A. K., Friz, J. L., Cress, D. E., Hong, Y., and Guan, J. J., 2011, "Spatial Control of Gene Expression Within a Scaffold by Localized Inducer Release," Bioma-terials http://dx.doi.org/10.1016/j.biomaterials.2010.12.037, 32(11), pp. 3062-3071.
52. Sadiasa, A., Nguyen, T. H., and Lee, B. T., 2014, "In vitro and in vivo Evaluation of Porous PCL-PLLA 3D Polymer Scaffolds Fabricated via Salt Leaching Method for Bone Tissue Engineering Applications," J. Biomater. Sci., Polym. Ed. http://dx.doi.org/10.1080/09205063.2013.846633, 25(2), pp. 150-167.
53. Zhang, J. C., Wu, L. B., Jing, D. Y., and Ding, J. D., 2005, "A Comparative Study of Porous Scaffolds With Cubic and Spherical Macropores," Polymer http://dx.doi.org/10.1016/j.polymer.2005.02.120, 46(13), pp. 4979-4985.
54. Tran, R. T., Naseri, E., Kolasnikov, A., Bai, X. C., and Yang, J., 2011, "A New Generation of Sodium Chloride Porogen for Tissue Engineering," Bio-technol. Appl. Biochem. http://dx.doi.org/10.1002/bab.44, 58(5), pp. 335-344.
55. Tang, G. W., Zhang, H., Zhao, Y. H., Zhang, Y., Li, X. L., and Yuan, X. Y., 2012, "Preparation of PLGA Scaffolds With Graded Pores by Using a Gelatin-Microsphere Template as Porogen," J. Biomater. Sci., Polym. Ed. http://dx.doi.org/10.1163/156856211X614185, 23(17), pp. 2241-2257.
56. Li, J. S., Yuan, X. Y., He, F., and Mak, A. F. T., 2008, "Hybrid Coating of Hy-droxyapatite and Collagen Within Poly(D,L-Lactic-Co-Glycolic Acid) Scaffold," J. Biomed. Mater. Res. Part B http://dx.doi.org/10.1002/jbm.b. 31031, 86B(2), pp. 381-388.
57. Ma, Z. W., Gao, C. Y., Gong, Y. H., and Shen, J. C., 2003, "Paraffin Spheres as Porogen to Fabricate Poly(L-Lactic Acid) Scaffolds With Improved Cyto-compatibility for Cartilage Tissue Engineering," J. Biomed. Mater. Res. Part B http://dx.doi.org/10.1002/jbm.b.10049, 67B(1), pp. 610-617.
58. Ma, P. X., and Choi, J. W., 2001, "Biodegradable Polymer Scaffolds With Well-Defined Interconnected Spherical Pore Network," Tissue Eng. http://dx.doi.org/10.1089/107632701300003269, 7(1), pp. 23-33. (Pubitemid 32175959)
59. Guo, L. Y., Zhang, J. W., Zhao, J., Wang, J. X., Weng, J., and Zhang, C., 2011, "Preparation and Characterization of Porous Scaffolds With Favourable Interpore Connectivity," J. Inorg. Mater. http://dx.doi.org/10. 3724/SP.J.1077.2011.00017, 26(1), pp. 17-21.
60. Wei, G. B., and Ma, P. X., 2006, "Macroporous and Nanofibrous Polymer Scaffolds and Polymer/Bone-Like Apatite Composite Scaffolds Generated by Sugar Spheres," J. Biomed. Mater. Res. Part A http://dx.doi.org/10.1002/ jbm.a.30704, 78A(2), pp. 306-315. (Pubitemid 44061068)
61. Vaquette, C., Frochot, C., Rahouadj, R., and Wang, X., 2008, "An Innovative Method to Obtain Porous PLLA Scaffolds With Highly Spherical and Interconnected Pores," J. Biomed. Mater. Res. Part B http://dx.doi.org/10. 1002/jbm.b.30982, 86B(1), pp. 9-17. (Pubitemid 351874362)
62. Hou, Q. P., Grijpma, D. W., and Feijen, J., 2003, "Preparation of Interconnected Highly Porous Polymeric Structures by a Replication and Freeze-Drying Process," J. Biomed. Mater. Res. Part B http://dx.doi.org/10. 1002/jbm.b.10066, 67B(2), pp. 732-740. (Pubitemid 37521380)
63. Yang, Y., Zhao, J., Zhao, Y., Wen, L., Yuan, X., and Fan, Y., 2008, "Formation of Porous PLGA Scaffolds by a Combining Method of Thermally Induced Phase Separation and Porogen Leaching," J. Appl. Polym. Sci. http://dx.doi.org/10.1002/app.28147, 109(2), pp. 1232-1241.
64. Liu, X. H., Won, Y. J., and Ma, P. X., 2006, "Porogen-Induced Surface Modification of Nano-Fibrous Poly(L-Lactic Acid) Scaffolds for Tissue Engineering," Biomaterials http://dx.doi.org/10.1016/j.biomaterials.2006. 03.008, 27(21), pp. 3980-3987. (Pubitemid 44316597)
65. Thomson, R. C., Yaszemski, M. J., Powers, J. M., and Mikos, A. G., 1995, "Fabrication of Biodegradable Polymer Scaffolds to Engineer Trabecular Bone," J. Biomater. Sci., Polym. Ed. http://dx.doi.org/10.1163/ 156856295X00805, 7(1), pp. 23-38.
66. Thomson, R. C., Yaszemski, M. J., Powers, J. M., and Mikos, A. G., 1998, "Hydroxyapatite Fiber Reinforced Poly(Alpha-Hydroxy Ester) Foams for Bone Regeneration," Biomaterials http://dx.doi.org/10.1016/S0142-9612(98)00097- 0, 19(21), pp. 1935-1943. (Pubitemid 28528795)
67. Ko, Y. G., Grice, S., Kawazoe, N., Tateishi, T., and Chen, G. P., 2010, "Preparation of Collagen-Glycosaminoglycan Sponges With Open Surface Porous Structures Using Ice Particulate Template Method," Macromol. Biosci. http://dx.doi.org/10.1002/mabi.200900468, 10(8), pp. 860-871.
68. Ko, Y. G., Kawazoe, N., Tateishi, T., and Chen, G. P., 2010, "Preparation of Novel Collagen Sponges Using an Ice Particulate Template," J. Bioact. Com-pat. Polym. http://dx.doi.org/10.1177/ 0883911510370002, 25(4), pp. 360-373.
69. Lu, H. X., Ko, Y. G., Kawazoe, N., and Chen, G. P., 2010, "Cartilage Tissue Engineering Using Funnel-Like Collagen Sponges Prepared With Embossing Ice Particulate Templates," Biomaterials http://dx.doi.org/10.1016/j. biomaterials.2010.04.019, 31(22), pp. 5825-5835.
70. Ko, Y. G., Oh, H. H., Kawazoe, N., Tateishi, T., and Chen, G. P., 2011, "Preparation of Open Porous Hyaluronic Acid Scaffolds for Tissue Engineering Using the Ice Particulate Template Method," J. Biomater. Sci., Polym. Ed. http://dx.doi.org/10.1163/092050609X12580983951602, 22(1-3), pp. 123-138.
71. Freitas, S., Merkle, H. P., and Gander, B., 2005, " Microencapsulation by Solvent Extraction/Evaporation: Reviewing the State of the Art of Microsphere Preparation Process Technology," J. Controlled Release http://dx.doi.org/10.1016/j.jconrel.2004.10.015, 102(2), pp. 313-332. (Pubitemid 40093756)
72. Bigi, A., Boanini, E., Panzavolta, S., Roveri, N., and Rubini, K., 2002, "Bonelike Apatite Growth on Hydroxyapatite-Gelatin Sponges From Simulated Body Fluid," J. Biomed. Mater. Res. http://dx.doi.org/10.1002/jbm.10045, 59(4), pp. 709-715. (Pubitemid 34044474)
73. Liu, X., Smith, L. A., Hu, J., and Ma, P. X., 2009, "Biomimetic Nanofibrous Gelatin/Apatite Composite Scaffolds for Bone Tissue Engineering," Biomate-rials http://dx.doi.org/10.1016/j.biomaterials.2008. 12.068, 30(12), pp. 2252-2258.
74. Zhou, Q. L., Gong, Y. H., and Gao, C. Y., 2005, "Microstructure and Mechanical Properties of Poly(L-Lactide) Scaffolds Fabricated by Gelatin Particle Leaching Method," J. Appl. Polym. Sci. http://dx.doi.org/10.1002/ app.22289, 98(3), pp. 1373-1379.
75. Adhirajan, N., Shanmugasundaram, N., Shanmuganathan, S., and Babu, M. 2009, "Functionally Modified Gelatin Microspheres Impregnated Collagen Scaffold as Novel Wound Dressing to Attenuate the Proteases and Bacterial Growth," Eur. J. Pharm. Sci. http://dx.doi.org/10.1016/j.ejps.2008.09.010, 36(2-3), pp. 235-245.
76. Habraken, W., Boerman, O. C., Wolke, J. G. C., Mikos, A. G., and Jansen, J. A., 2009, "In vitro Growth Factor Release From Injectable Calcium Phosphate Cements Containing Gelatin Microspheres," J. Biomed. Mater. Res. Part A http://dx.doi.org/10.1002/jbm.a.32263, 91A(2), pp. 614-622.
77. Kimura, Y., Tsuji, W., Yamashiro, H., Toi, M., Inamoto, T., and Tabata, Y. 2010, "In Situ Adipogenesis in Fat Tissue Augmented by Collagen Scaffold With Gelatin Microspheres Containing Basic Fibroblast Growth Factor," J. Tissue Eng. Regener. Med. http://dx.doi.org/10.1002/term.218, 4(1), pp. 55-61.
78. Agrawal, C. M., Karande, T. S., and Ong, J. L., 2004, "Diffusion in Musculoskeletal Tissue Engineering Scaffolds: Design Issues Related to Porosity, Permeability, Architecture, and Nutrient Mixing," Ann. Biomed. Eng. http://dx.doi.org/10.1007/s10439-004-7825-2, 32(12), pp. 1728-1743. (Pubitemid 40121305)
79. Murphy, W. L., Dennis, R. G., Kileny, J. L., and Mooney, D. J., 2002, "Salt Fusion: An Approach to Improve Pore Interconnectivity Within Tissue Engineering Scaffolds," Tissue Eng. http://dx.doi.org/10.1089/ 107632702753503045, 8(1), pp. 43-52. (Pubitemid 34194663)
80. Chen, S., Baker, I., and Frost, H. J., 2013, "Surface Instability and Mass Transfer During the Bonding of Ice Spheres," Philos. Mag. http://dx.doi.org/10.1080/14786435.2013.805274, 93(23), pp. 3177-3193.
81. Wei, G., and Ma, P. X., 2009, "Partially Nanofibrous Architecture of 3D Tissue Engineering Scaffolds," Biomaterials http://dx.doi.org/10.1016/ j.biomaterials.2009.08.012, 30(32), pp. 6426-6434.
82. Hong, Y., and Yao, D., 2013, "Mechanical Behavior of Porous Polysiloxane With Micropores Interconnected by Microchannels," Polym. Eng. Sci. http://dx.doi.org/10.1002/pen.23688, (in press).
83. Pego, A. P., Poot, A. A., Grijpma, D. W., and Feijen, J., 2003, "Biodegradable Elastomeric Scaffolds for Soft Tissue Engineering," J. Controlled Release http://dx.doi.org/10.1016/S0168-3659(02)00351-6, 87(1-3), pp. 69-79. (Pubitemid 36255447)
84. Wu, L. B., and Ding, J. D., 2004, "In vitro Degradation of Three-Dimensional Porous Poly(D,L-Lactide-Co-Glycolide) Scaffolds for Tissue Engineering," Biomaterials http://dx.doi.org/10.1016/j.biomaterials.2004. 01.038, 25(27), pp. 5821-5830.
85. Malda, J., Woodfield, T. B. F., van der Vloodt, F., Wilson, C., Martens, D. E., Tramper, J., van Blitterswijk, C. A., and Riesle, J. 2005, "The Effect of PEGT/PBT Scaffold Architecture on the Composition of Tissue Engineered Cartilage," Biomaterials http://dx.doi.org/10.1016/j.biomaterials.2004.02. 046, 26(1), pp. 63-72. (Pubitemid 38759472)
86. Santerre, J. P., Sharifpoor, S., Simmons, C. A., and Labow, R. S., 2010, "A Study of Vascular Smooth Muscle Cell Function Under Cyclic Mechanical Loading in a Polyurethane Scaffold With Optimized Porosity," Acta Bio-mater. http://dx.doi.org/10.1016/j.actbio.2010.06.018, 6(11), pp. 4218-4228.
87. Shokrolahi, F., Mirzadeh, H., Yeganeh, H., and Daliri, M., 2011, "Fabrication of Poly(Urethane Urea)-Based Scaffolds for Bone Tissue Engineering by a Combined Strategy of Using Compression Moulding and Particulate Leaching Methods," Iranian Polym. J., 20(8), pp. 645-658.
88. Pan, Z., Qu, Z. H., Zhang, Z., Peng, R., Yan, C., and Ding, J. D., 2013, "Particle-Collision and Porogen-Leaching Technique to Fabricate Polymeric Porous Scaffolds With Microscale Roughness of Interior Surfaces," Chin. J. Polym. Sci. http://dx.doi.org/10.1007/s10118-013-1264-1, 31(5), pp. 737-747.
89. Yao, D. G., Zhang, W., and Zhou, J. G., 2009, Controllable Growth of Gradient Porous Structures," Biomacromolecules, 10(5), pp. 1282-1286.
90. Miao, X. G., and Sun, D., 2010, "Graded/Gradient Porous Biomaterials," Materials http://dx.doi.org/10.3390/ma3010026, 3(1), pp. 26-47.
91. Werner, J., Linner-Krcmar, B., Friess, W., and Greil, P., 2002, "Mechanical Properties and in vitro Cell Compatibility of Hydroxyapatite Ceramics With Graded Pore Structure," Biomaterials http://dx.doi.org/10. 1016/S0142-9612(02)00191-6, 23(21), pp. 4285-4294. (Pubitemid 34814997)
92. Wu, H., Wan, Y., Cao, X., Dalai, S., Wang, S., and Zhang, S., 2008, "Fabrication of Chitosan-g-Polycaprolactone Copolymer Scaffolds With Gradient Porous Microstructures," Mater. Lett. http://dx.doi.org/10.1016/j. matlet.2008.01.029, 62(17-18), pp. 2733-2736
93. Gong, X. H., Tang, C. Y., Zhang, Y. G., Wong, C. T., Wu, S. P., and Liu, J. N., 2012, "Fabrication of Graded Macroporous Poly(Lactic Acid) Scaffold by a Progressive Solvent Casting/Porogen Leaching Approach," J. Appl. Polym. Sci. http://dx.doi.org/10.1002/app.35690, 125(1), pp. 571-577.
94. Iwata, M., Shimono, A., Kishiro, K., and Kunieda, Y., 1998, "Preparation of Porous Hydroxyapatite Materials With a Continuous Porosity Profile by Use of a Filtration Method," J. Jpn. Inst. Met., 62(11), pp. 1088-1094. (Pubitemid 128619246)
95. Droschel, M., Hoffmann, M. J., Oberacker, R., von Both, H., Schaller, W., Yang, Y. Y., and Munz, D., 2000, "SiC-Ceramics With Tailored Porosity Gradients for Combustion Chambers," Engineering Ceramics: Multifunctional Properties-New Perspectives, P. Sajgalik and Z. Lences, eds., Trans Tech Publications, Ltd., Zurich, Switzerland, pp. 149-162 (Pubitemid 30536214)
96. Miao, X., Hu, Y., Liu, J., Tio, B., Cheang, P., and Khor, K. A., 2003, "Highly Interconnected and Functionally Graded Porous Bioceramics," Bioceramics 15, B. BenNissan, D. Sher, and W. Walsh, eds., Trans Tech Publications, Ltd., Zurich, Switzerland, pp. 595-598.
97. Roosa, S. M. M., Kemppainen, J. M., Moffitt, E. N., Krebsbach, P. H., and Hollister, S. J., 2010, "The Pore Size of Polycaprolactone Scaffolds has Limited Influence on Bone Regeneration in an in vivo Model," J. Biomed. Mater. Res. Part A http://dx.doi.org/10.1002/jbm.a.32381, 92A(1), pp. 359-368.
98. Gong, Y. H., Ma, Z. W., Zhou, Q. L., Li, J., Gao, C. Y., and Shen, J. C., 2008, "Poly(Lactic Acid) Scaffold Fabricated by Gelatin Particle Leaching has Good Biocompatibility for Chondrogenesis," J. Biomater. Sci., Polym. Ed. http://dx.doi.org/10.1163/156856208783432453, 19(2), pp. 207-221.
99. Chen, G. P., Ushida, T., and Tateishi, T., 2001, "Preparation of Poly(L-Lactic Acid) and Poly(DL-Lactic-Co-Glycolic Acid) Foams by Use of Ice Micro-particulates," Biomaterials http://dx.doi.org/10.1016/S0142-9612(00) 00447-6, 22(18), pp. 2563-2567. (Pubitemid 32706459)
100. Li, L. H., Kommareddy, K. P., Pilz, C., Zhou, C. R., Fratzl, P., and Manjubala, I., 2010, "In vitro Bioactivity of Bioresorbable Porous Polymeric Scaffolds Incorporating Hydroxyapatite Microspheres," Acta Biomater. http://dx.doi.org/10.1016/j.actbio.2009.03.028, 6(7), pp. 2525-2531.
101. Stares, S. L., Fredel, M. C., Aragones, A., Gutmanas, E. Y., Gotman, I., Greil, P., and Travitzky, N., 2013, "PLLA/HA Composite Laminates," Adv. Eng. Mater. http://dx.doi.org/10.1002/adem.201200395, 15(11), pp. 1122-1124.
102. Tadmor, Z., and Gogos, C. G., 2006, Principles of Polymer Processing, Vol. 16, 2nd ed., Wiley-Interscience, Hoboken, NJ.
103. Kamal, M. R., Isayev, A. I., and Liu, S.-J., 2009, Injection Molding: Technology and Fundamentals, Hanser, Munich.
104. Boczkowska, A., Chabera, P., Dolata, A. J., Dyzia, M., and Ozieblo, A., 2013, "Porous Ceramic-Metal Composites Obtained by Infiltration Methods," Met-alurgija, 52(3), pp. 345-348.
105. Zhang, J., Yan, D. X., Lei, J., Xu, J. Z., Hsiao, B. S., and Li, Z. M., 2013, "Ultraporous Poly(Lactic Acid) Scaffolds With Improved Mechanical Performance Using High-Pressure Molding and Salt Leaching," J. Appl. Polym. Sci. http://dx.doi.org/10.1002/app.39570, 130(5), pp. 3509-3520.
106. Virgilio, N., Sarazin, P., and Favis, B. D., 2010, "Towards Ultraporous Poly(L-Lactide) Scaffolds From Quaternary Immiscible Polymer Blends," Biomaterials http://dx.doi.org/10.1016/j.biomaterials.2010.03.071, 31(22), pp. 5719-5728.
107. Stevens, B., Yang, Y. Z., Mohandas, A., Stucker, B., and Nguyen, K. T., 2008, "A Review of Materials, Fabrication to Enhance Bone Regeneration in Methods, and Strategies Used Engineered Bone Tissues," J. Biomed. Mater. Res. Part B http://dx.doi.org/10.1002/jbm.b.30962, 85B(2), pp. 573-582. (Pubitemid 351600465)
108. Jongpaiboonkit, L., Lin, C. Y., Krebsbach, P. H., Hollister, S. J., and Halloran, J. W., 2006, "Mechanical Behavior of Complex 3D Calcium Phosphate Cement Scaffolds Fabricated by Indirect Solid Freeform Fabrication in vivo," Bioceramics 18, Parts 1 and 2, T. Nakamura, K. Yamashita, and M. Neo, eds., Trans Tech Publications, Ltd., Zurich, Switzerland, pp. 957-960.
109. Li, X., Bian, W., Li, D., Lian, Q., and Jin, Z., 2011, "Fabrication of Porous Beta-Tricalcium Phosphate With Microchannel and Customized Geometry Based on Gel-Casting and Rapid Prototyping," Proc. Inst. Mech. Eng. Part H, 225(H3), pp. 315-323.
110. Lin, L. L., Zhang, H. C., Zhao, L., Hu, Q. X., and Fang, M. L., 2009, "Design and Preparation of Bone Tissue Engineering Scaffolds With Porous Controllable Structure," J. Wuhan Univ. Technol., Mater. Sci. Ed. http://dx.doi.org/10.1007/s11595-009-2174-5, 24(2), pp. 174-180.
111. Sharma, B., and Elisseeff, J. H., 2004, "Engineering Structurally Organized Cartilage and Bone Tissues," Ann. Biomed. Eng. http://dx.doi.org/10.1023/B:ABME.0000007799.60142.78, 32(1), pp. 148-159.
112. Kuo, Y. C., and Leou, S. N., 2006, "Effects of Composition, Solvent, and Salt Particles on the Physicochemical Properties of Polyglycolide/ Poly(Lactide-Co-Glycolide) Scaffolds," Biotechnol. Prog. http://dx.doi.org/10.1002/bp0602303, 22(6), pp. 1664-1670.
113. Izal, I., Aranda, P., Sanz-Ramos, P., Ripalda, P., Mora, G., Granero-Molto, F., Deplaine, H., Gomez-Ribelles, J. L., Ferrer, G. G., Acosta, V., Ochoa, I., Gar-cia-Aznar, J. M., Andreu, E. J., Monleon-Pradas, M., Doblare, M., and Prosper, F., 2013, "Culture of Human Bone Marrow-Derived Mesenchymal Stem Cells on of Poly(L-Lactic Acid) Scaffolds, Potential Application for the Tissue Engineering of Cartilage," Knee Surg. Sports Traumatol. Arthrosc. http://dx.doi.org/10.1007/s00167-012-2148-6, 21(8), pp. 1737-1750.
114. Akhyari, P., Kamiya, H., Haverich, A., Karck, M., and Lichtenberg, A., 2008, "Myocardial Tissue Engineering: The Extracellular Matrix," Eur. J. Cardio-Thorac. Surg. http://dx.doi.org/10.1016/j.ejcts.2008.03.062, 34(2), pp. 229-241.
115. Teebken, O. E., and Haverich, A., 2002, "Tissue Engineering of Small Diameter Vascular Grafts," Eur. J. Vasc. Endovasc. Surg. http://dx.doi.org/10.1053/ejvs.2002.1654, 23(6), pp. 475-485. (Pubitemid 41079396)
116. Johnson, T., Bahrampourian, R., Patel, A., and Mequanint, K., 2010, "Fabrication of Highly Porous Tissue-Engineering Scaffolds Using Selective Spherical Porogens," Biomed. Mater. Eng. http://dx.doi.org/10.3233/BME- 2010-0621, 20(2), pp. 107-118.
117. Crapo, P. M., and Wang, Y., 2010, "Physiologic Compliance in Engineered Small-Diameter Arterial Constructs Based on an Elastomeric Substrate," Biomaterials http://dx.doi.org/10.1016/j.biomaterials.2009.11. 035, 31(7), pp. 1626-1635.
118. Ameer, G. A., Yang, J., Motlagh, D., and Webb, A. R., 2005, "Novel Biphasic Elastomeric Scaffold for Small-Diameter Blood Vessel Tissue Engineering," Tissue Eng. http://dx.doi.org/10.1089/ten.2005.11.1876, 11(11-12), pp. 1876-1886. (Pubitemid 43120200)
119. Santerre, J. P., Sharifpoor, S., and Labow, R. S., 2009, "Synthesis and Characterization of Degradable Polar Hydrophobic Ionic Polyurethane Scaffolds for Vascular Tissue Engineering Applications," Biomacromolecules http://dx.doi.org/10.1021/bm9004194, 10(10), pp. 2729-2739.
120. Santerre, J. P., Sharifpoor, S., Simmons, C. A., and Labow, R. S., 2011, "Functional Characterization of Human Coronary Artery Smooth Muscle Cells Under Cyclic Mechanical Strain in a Degradable Polyurethane Scaffold," Bio-materials http://dx.doi.org/10.1016/j.biomaterials.2011.03.034, 32(21), pp. 4816-4829.
121. Lee, K. W., and Wang, Y., 2011, "Elastomeric PGS Scaffolds in Arterial Tissue Engineering," J. Vis. Exp. http://dx.doi.org/10.3791/2691, 50, p. 2691.
122. Jiang, B., Waller, T. M., Larson, J. C., Appel, A. A., and Brey, E. M., 2013, "Fibrin-Loaded Porous Poly(Ethylene Glycol) Hydrogels as Scaffold Materials for Vascularized Tissue Formation," Tissue Eng. Part A http://dx.doi.org/10.1089/ten.tea.2012.0120, 19(1-2), pp. 224-234.
123. Kim, S. H., Mun, C. H., Jung, Y., Kim, S. H., Kim, D. I., and Kim, S. H., 2013, "Mechanical Properties of Compliant Double Layered Poly(L-Lactide-Co-Epsilon-Caprolactone) Vascular Graft," Macromol. Res. http://dx.doi.org/10.1007/s13233-013-1095-5, 21(8), pp. 886-891.
124. Nerem, R. M., and Ensley, A. E., 2004, "The Tissue Engineering of Blood Vessels and the Heart," Am. J. Transplant. http://dx.doi.org/10.1111/ j.1600-6135.2004.0343.x, 4, pp. 36-42. (Pubitemid 38282277)
125. Wagner, W. R., Fujimoto, K. L., Guan, J. J., Oshima, H., and Sakai, T., 2007, "In vivo Evaluation of a Porous, Elastic, Biodegradable Patch for Reconstructive Cardiac Procedures," Ann. Thorac. Surg. http://dx.doi.org/ 10.1016/j.athoracsur.2006.06.085, 83(2), pp. 648-654. (Pubitemid 46135423)
126. Shakesheff, K. M., Hidalgo-Bastida, L. A., Barry, J. J. A., Everitt, N. M., Rose, F. R. A. J., Buttery, L. D., Hall, I. P., and Claycomb, W. C., 2007, "Cell Adhesion and Mechanical Properties of a Flexible Scaffold for Cardiac Tissue Engineering," Acta Biomater. http://dx.doi.org/10.1016/j.actbio. 2006.12.006, 3(4), pp. 457-462. (Pubitemid 46865782)
127. Radisic, M., Park, H., Chen, F., Salazar-Lazzaro, J. E., Wang, Y., Dennis, R., Langer, R., Freed, L. E., and Vunjak-Novakovic, G., 2006, "Biomimetic Approach to Cardiac Tissue Engineering: Oxygen Carriers and Channeled Scaffolds," Tissue Eng. http://dx.doi.org/10.1089/ten.2006.12. 2077, 12(8), pp. 2077-2091. (Pubitemid 44734968)
128. Radisic, M., Park, H., Martens, T. P., Salazar-Lazaro, J. E., Geng, W., Wang, Y., Langer, R., Freed, L. E., and Vunjak-Novakovic, G., 2007, "Pre-Treatment of Synthetic Elastomeric Scaffolds by Cardiac Fibroblasts Improves Engineered Heart Tissue," J. Biomed. Mater. Res. Part A http://dx.doi.org/10.1002/jbm.a.31578, 86A(3), pp. 713-724.
129. Vunjak-Novakovic, G., Marsano, A., Maidhof, R., Wan, L. Q., Wang, Y. D., Gao, J., and Tandon, N., 2010, "Scaffold Stiffness Affects the Contractile Function of Three-Dimensional Engineered Cardiac Constructs," Biotechnol. Prog. http://dx.doi.org/10.1002/btpr.435, 26(5), pp. 1382-1390.
130. Guarino, V., Gloria, A., Alvarez-Perez, M., Raucci, M. G., Cirillo, V., Ronca, A., De Santis, R., and Ambrosio, L., 2011, Design of Functional Polymer and Composite Scaffolds for the Regeneration of Bone, Menisci, Osteochondral and Peripheral Nervous Tissues," Advances in Innovative Materials and Applications, M. Soueidan, M. Roumie, and P. Masri, eds., Trans Tech Publications, Ltd., Zurich, Switzerland, pp. 8-13.
131. Studenovska, H., Slouf, M., and Rypacek, F., 2008, "Poly(HEMA) Hydrogels With Controlled Pore Architecture for Tissue Regeneration Applications," J. Mater. Sci.: Mater. Med. http://dx.doi.org/10.1007/ s10856-007-3217-0, 19(2), pp. 615-621. (Pubitemid 351244037)
132. Guo, B., Sun, Y., Finne-Wistrand, A., Mustafa, K., and Albertsson, A.-C., 2012, "Electroactive Porous Tubular Scaffolds With Degradability and Non-Cytotoxicity for Neural Tissue Regeneration," Acta Biomater. http://dx.doi.org/10.1016/j.actbio.2011.09.027, 8(1), pp. 144-153.
133. Kokai, L. E., Lin, Y.-C., Oyster, N. M., and Marra, K. G., 2009, "Diffusion of Soluble Factors Through Degradable Polymer Nerve Guides: Controlling Manufacturing Parameters," Acta Biomater. http://dx.doi.org/10. 1016/j.actbio.2009.03.009, 5(7), pp. 2540-2550.
134. Wong, D. Y., Leveque, J.-C., Brumblay, H., Krebsbach, P. H., Hollister, S. J., and LaMarca, F., 2008, "Macro-Architectures in Spinal Cord Scaffold Implants Influence Regeneration," J. Neurotrauma http://dx.doi.org/10.1089/ neu.2007.0473, 25(8), pp. 1027-1037.
135. Moisenovich, M. M., Pustovalova, O. L., Arhipova, A. Y., Vasiljeva, T. V., Sokolova, O. S., Bogush, V. G., Debabov, V. G., Sevastianov, V. I., Kirpichni-kov, M. P., and Agapov, I. I., 2011, "In vitro and in vivo Biocompatibility Studies of a Recombinant Analogue of Spidroin 1 Scaffolds," J. Biomed. Mater. Res. Part A http://dx.doi.org/10.1002/jbm.a. 32968, 96A(1), pp. 125-131.
136. Hu, Y. Q., and Zhu, K. J., 2004, "Synthesis, Characterization and Degradation of Poly(2,2-Dimethyl Trimethylene Carbonate-Co-Epsilon-Caprolactone- Co-Glycolide)," Polym. Degrad. Stab. http://dx.doi.org/10.1016/j. polymdegradstab.2003.12.010, 85(1), pp. 705-712.
137. Ohashi, K., 2008, "Liver Tissue Engineering: The Future of Liver Therapeutics," Hepatol. Res. http://dx.doi.org/10.1111/j.1872-034X.2008. 00431.x, 38, pp. S76-S87.
138. He, J. K., Li, D. C., Liu, Y. X., Yao, B., Lu, B. H., and Lian, Q., 2007, "Fabrication and Characterization of Chitosan/Gelatin Porous Scaffolds With Predefined Internal Microstructures," Polymer http://dx.doi.org/10. 1016/j.polymer.2007.04.016, 48(15), pp. 4578-4588.
139. Kataoka, K., Nagao, Y., Nukui, T., Akiyama, I., Tsuru, K., Hayakawa, S., Osaka, A., and Huh, N., 2005, "An Organic-Inorganic Hybrid Scaffold for the Culture of HepG2 Cells in a Bioreactor," Biomaterials http://dx.doi.org/ 10.1016/j.biomaterials.2004.07.012, 26(15), pp. 2509-2516. (Pubitemid 39600703)
140. Javaid Ur, R., and Waseem, T., 2008, "Intestinal Tissue Engineering: Where do We Stand?," Surg. Today http://dx.doi.org/10.1007/s00595-007- 3671-9, 38(6), pp. 484-486. (Pubitemid 351758637)
141. Widmer, M. S., Gupta, P. K., Lu, L. C., Meszlenyi, R. K., Evans, G. R. D., Brandt, K., Savel, T., Gurlek, A., Patrick, C. W., and Mikos, A. G., 1998, "Manufacture of Porous Biodegradable Polymer Conduits by an Extrusion Process for Guided Tissue Regeneration," Biomaterials http://dx.doi.org/10. 1016/S0142-9612(98)00099-4, 19(21), pp. 1945-1955. (Pubitemid 28528796)
142. Gupta, A., Vara, D. S., Punshon, G., Sales, K. M., Winslet, M. C., and Seifa-lian, A. M., 2009, "In vitro Small Intestinal Epithelial Cell Growth on a Nano-composite Polycaprolactone Scaffold," Biotechnol. Appl. Biochem. http://dx.doi.org/10.1042/BA20090214, 54, pp. 221-229.
143. Horch, R. E., Kopp, J., Kneser, U., Beier, J., and Bach, A. D., 2005, "Tissue Engineering of Cultured Skin Substitutes," J. Cell. Mol. Med. http://dx.doi.org/10.1111/j.1582-4934.2005.tb00491.x, 9(3), pp. 592-608. (Pubitemid 44159327)
144. Ahn, S., Lee, S., Cho, Y., Chun, W., and Kim, G., 2011, "Fabrication of Three-Dimensional Collagen Scaffold Using an Inverse Mould-Leaching Process," Bioprocess Biosyst. Eng. http://dx.doi.org/10.1007/s00449-011- 0541-z, 34(7), pp. 903-911.
145. Lee, S. B., Kim, Y. H., Chong, M. S., Hong, S. H., and Lee, Y. M., 2005, "Study of Gelatin-Containing Artificial Skin V: Fabrication of Gelatin Scaffolds Using a Salt-Leaching Method," Biomaterials http://dx.doi.org/10. 1016/j.biomaterials.2004.06.032, 26(14), pp. 1961-1968. (Pubitemid 39575338)
146. Benatti, B. B., Silverio, K. G., Casati, M. Z., Sallum, E. A., and Nociti, F. H., 2007, "Physiological Features of Periodontal Regeneration and Approaches for Periodontal Tissue Engineering Utilizing Periodontal Ligament Cells," J. Biosci. Bioeng. http://dx.doi.org/10.1263/jbb.103.1, 103(1), pp. 1-6. (Pubitemid 46216897)
147. Schander, K., Arvidson, K., Mustafa, K., Hellem, E., Bolstad, A. I., Finne-Wistrand, A., and Albertsson, A. C., 2010, "Response of Bone and Periodontal Ligament Cells to Biodegradable Polymer Scaffolds in vitro," J. Bioact. Com-pat. Polym. http://dx.doi.org/10.1177/0883911510383684, 25(6), pp. 584-602.
148. Xu, Y. Z., Wu, J. J., Chen, Y. P., Liu, J. A., Li, N., and Yang, F. Y., 2010, "The Use of Zein and Shuanghuangbu for Periodontal Tissue Engineering," Int. J. Oral Sci. http://dx.doi.org/10.4248/IJOS10056, 2(3), pp. 142-148.
149. Garg, T., Singh, O., Arora, S., and Murthy, R. S. R., 2012, "Scaffold: A Novel Carrier for Cell and Drug Delivery," Crit. Rev. Ther. Drug Carrier Syst. http://dx.doi.org/10.1615/CritRevTherDrugCarrierSyst. v29.i1.10, 29(1), pp. 1-63.
150. Yoon, J. J., Kim, J. H., and Park, T. G., 2003, "Dexamethasone- Releasing Biodegradable Polymer Scaffolds Fabricated by a Gas-Foaming/Salt- Leaching Method," Biomaterials http://dx.doi.org/10.1016/S0142-9612(03) 00024-3, 24(13), pp. 2323-2329. (Pubitemid 36434052)
151. El-Ayoubi, R., Eliopoulos, N., Diraddo, R., Jacques, G., and Yousef, A. M., 2008, "Design and Fabrication of 3D Porous Scaffolds to Facilitate Cell-Based Gene Therapy," Tissue Eng. Part A http://dx.doi.org/10.1089/ten. tea.2006.0418, 14(6), pp. 1037-1048. (Pubitemid 351863673)
152. Kloke, A., von Stetten, F., Zengerle, R., and Kerzenmacher, S., 2011, "Strategies for the Fabrication of Porous Platinum Electrodes," Adv. Mater. http://dx.doi.org/10.1002/adma.201102182, 23(43), pp. 4976-5008.
153. Taillades, G., Batocchi, P., Essoumhi, A., Taillades, M., Jones, D. J., and Roziere, J., 2011, "Engineering of Porosity, Microstructure and Electrical Properties of Ni-BaCe0.9Y0.1O2.95 Cermet Fuel Cell Electrodes by Gelled Starch Porogen Processing," Microporous Mesoporous Mater. http://dx.doi.org/10.1016/j.micromeso.2011.04.020, 145(1-3), pp. 26-31.
154. Luckarift, H. R., Sizemore, S. R., Farrington, K. E., Roy, J., Lau, C., Atanas-sov, P. B., and Johnson, G. R., 2012, "Facile Fabrication of Scalable, Hierarchically Structured Polymer/Carbon Architectures for Bioelectrodes," ACS Appl. Mater. Interfaces http://dx.doi.org/10.1021/ am300048v, 4(4), pp. 2082-2087.
155. Simms, H. A., Bowman, C. A., and Anseth, K. S., 2008, "Using Living Radical Polymerization to Enable Facile Incorporation of Materials in Micro-fluidic Cell Culture Devices," Biomaterials http://dx.doi.org/10. 1016/j.biomaterials.2008.02.001, 29(14), pp. 2228-2236.
156. Perez, N., Tavera, T., Rodriguez, A., Ellman, M., Ayerdi, I., and Olaizola, S. M., 2012, "Fabrication of Sub-Micrometric Metallic Hollow-Core Structures by Laser Interference Lithography," Appl. Surf. Sci. http://dx.doi.org/10.1016/j.apsusc.2012.03.185, 258(23), pp. 9370-9373.
157. Wolf, A. J., Hauser, H., Kubler, V., Walk, C., Hohn, O., and Blasi, B., 2012, "Origination of Nano-and Microstructures on Large Areas by Interference Lithography," Microelectron. Eng. http://dx.doi.org/10.1016/j. mee.2012.05.018, 98, pp. 293-296.
158. Ahn, H. J., Thiyagarajan, P., Jia, L., Kim, S. I., Yoon, J. C., Thomas, E. L., and Jang, J. H., 2013, "An Optimal Substrate Design for SERS: Dual-Scale Diamond-Shaped Gold Nano-Structures Fabricated via Interference Lithography," Nanoscale http://dx.doi.org/10.1039/c3nr33498h, 5(5), pp. 1836-1842.