Brick masonry walls with PCM macrocapsules: An experimental approach

Applied Thermal Engineering

Volumn 67, Issue 1-2, 2014, Pages 24-34

  Vicente, Romeu ^a   Silva, Tiago ^a  

^a UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

Energy storage; Latent heat; Macrocapsules; Masonry brick walls; Phase change materials; Thermal comfort

Indexed keywords

CARBON DIOXIDE; ENERGY EFFICIENCY; ENERGY STORAGE; ENERGY UTILIZATION; ENVIRONMENTAL IMPACT; LATENT HEAT; MASONRY CONSTRUCTION; PHASE CHANGE MATERIALS; RETAINING WALLS; SOLAR ENERGY; THERMAL COMFORT; WALLS (STRUCTURAL PARTITIONS);

EXPERIMENTAL APPROACHES; EXPERIMENTAL CAMPAIGN; MACROCAPSULES; MASONRY BRICK WALLS; PASSIVE COOLING AND HEATING; RENEWABLE ENERGY SOURCE; TEMPERATURE FLUCTUATION; TOTAL ENERGY CONSUMPTION;

BRICK;

EID: 84897047046     PISSN: 13594311     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.applthermaleng.2014.02.069     Document Type: Article

References (55)

1. I.E. Agency World Energy Outlook 2011, Organisation for Economic Co-operation and Development 2011 France Paris
2. EU Action Against Climate Change: the European Climate Change Programme 2006 Off. for Official Publ. of the Europ. Communities Luxembourg
3. T. Silva, R. Vicente, N. Soares, and V. Ferreira Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: a passive construction solution Energy Build. 49 2012 235 245
4. N. Zhu, Z. Ma, and S. Wang Dynamic characteristics and energy performance of buildings using phase change materials: a review Energy Convers. Manag. 50 2009 3169 3181
5. H. Mehling, and L.F. Cabeza Heat and Cold Storage with PCM: an up to Date Introduction into basics and applications 2008 Springer Berlin, Germany
6. F. Kuznik, J. Virgone, and J. Noel Optimization of a phase change material wallboard for building use Appl. Therm. Eng. 28 2008 1291 1298
7. V.V. Tyagi, and D. Buddhi PCM thermal storage in buildings: a state of art Renew. Sustain. Energy Rev. 11 2007 1146 1166
8. R. Baetens, B.P. Jelle, and A. Gustavsen Phase change materials for building applications: a state-of-the-art review Energy Build. 42 2010 1361 1368
9. A. Sharma, V.V. Tyagi, C.R. Chen, and D. Buddhi Review on thermal energy storage with phase change materials and applications Renew. Sustain. Energy Rev. 13 2009 318 345
10. M. Farid A review on phase change energy storage: materials and applications Energy Convers. Manag. 45 2004 1597 1615
11. F. Kuznik, D. David, K. Johannes, and J.-J. Roux A review on phase change materials integrated in building walls Renew. Sustain. Energy Rev. 15 2011 379 391
12. L.F. Cabeza, A. Castell, C. Barreneche, A. de Gracia, and A.I. Fernández Materials used as PCM in thermal energy storage in buildings: a review Renew. Sustain. Energy Rev. 15 2011 1675 1695
13. P. Pinel, C.A. Cruickshank, I. Beausoleil-Morrison, and A. Wills A review of available methods for seasonal storage of solar thermal energy in residential applications Renew. Sustain. Energy Rev. 15 2011 3341 3359
14. B. Zalba, J.M. Marin, L.F. Cabeza, and H. Mehling Review on thermal energy storage with phase change: materials, heat transfer analysis and applications Appl. Therm. Eng. 23 2003 251 283
15. P.A. Maldonado Application of Passive Thermal Energy Storage in Buildings Using PCM and Awnings 2011 Department of Computer Science and Industrial Engineering, University of Lleida Lleida, Spain
16. W. Xiao, X. Wang, and Y. Zhang Analytical optimization of interior PCM for energy storage in a lightweight passive solar room Appl. Energy 86 2009 2013 2018
17. M.N.A. Hawlader, M.S. Uddin, and M.M. Khin Microencapsulated PCM thermal-energy storage system Appl. Energy 74 2003 195 202
18. M. Rady Thermal performance of packed bed thermal energy storage units using multiple granular phase change composites Appl. Energy 86 2009 2704 2720
19. A.M. Khudhair, and M.M. Farid A review on energy conservation in building applications with thermal storage by latent heat using phase change materials Energy Convers. Manag. 45 2004 263 275
20. R. Parameshwaran, S. Kalaiselvam, S. Harikrishnan, and A. Elayaperumal Sustainable thermal energy storage technologies for buildings: a review Renew. Sustain. Energy Rev. 16 2012 2394 2433
21. S. Ahmet Form-stable paraffin/high density polyethylene composites as solid-liquid phase change material for thermal energy storage: preparation and thermal properties Energy Convers. Manag. 45 2004 2033 2042
22. M. Xiao, B. Feng, and K. Gong Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity Energy Convers. Manag. 43 2002 103 108
23. Y.P. Zhang, K.P. Lin, R. Yang, H.F. Di, and Y. Jiang Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings Energy Build. 38 2006 1262 1269
24. Y. Zhang, J. Ding, X. Wang, R. Yang, and K. Lin Influence of additives on thermal conductivity of shape-stabilized phase change material Sol. Energy Mater. Sol. Cells 90 2006 1692 1702
25. L. Cabeza, C. Castellon, M. Nogues, M. Medrano, R. Leppers, and O. Zubillaga Use of microencapsulated PCM in concrete walls for energy savings Energy Build. 39 2007 113 119
26. L. Haselbach The Engineering Guide to LEED-new Construction: Sustainable Construction for Engineers 2010 McGraw-Hill New York, EUA
27. I. Dinçer, and M. Rosen Thermal Energy Storage: Systems and Applications 2011 Wiley New Jersey, EUA
28. K.A.R. Ismail, and J.R. Henríquez Thermally effective windows with moving phase change material curtains Appl. Therm. Eng. 21 2001 1909 1923
29. C. Arkar, and S. Medved Free cooling of a building using PCM heat storage integrated into the ventilation system Sol. Energy 81 2007 1078 1087
30. S. Uroš Heat transfer enhancement in latent heat thermal storage system for buildings Energy Build. 35 2003 1097 1104
31. K. Peippo, P. Kauranen, and P.D. Lund A multicomponent PCM wall optimized for passive solar heating Energy Build. 17 1991 259 270
32. H.E. Feustel, and C. Stetiu Thermal Performance of Phase Change Wallboard for Residential Cooling Application 1997 Lawrence Berkeley National Lab C.A., California, EUA
33. D.A. Neeper Thermal dynamics of wallboard with latent heat storage Sol. Energy 68 2000 393 403
34. A.K. Athienitis, C. Liu, D. Hawes, D. Banu, and D. Feldman Investigation of the thermal performance of a passive solar test-room with wall latent heat storage Build. Environ. 32 1997 405 410
35. T. Lee, D.W. Hawes, D. Banu, and D. Feldman Control aspects of latent heat storage and recovery in concrete Sol. Energy Mater. Sol. Cells 62 2000 217 237
36. D.W. Hawes, D. Banu, and D. Feldman Latent heat storage in concrete Sol. Energy Mater. 21 1990 61 80
37. A. Bontemps, M. Ahmad, K. Johannès, and H. Sallée Experimental and modelling study of twin cells with latent heat storage walls Energy Build. 43 2011 2456 2461
38. I. Cerón, J. Neila, and M. Khayet Experimental tile with phase change materials (PCM) for building use Energy Build. 43 2011 1869 1874
39. G. Zhou, Y. Zhang, K. Lin, and W. Xiao Thermal analysis of a direct-gain room with shape-stabilized PCM plates Renew. Energy 33 2008 1228 1236
40. A. Carbonari, M. Degrassi, C. Diperna, and P. Principi Numerical and experimental analyses of PCM containing sandwich panels for prefabricated walls Energy Build. 38 2006 472 483
41. E.M. Alawadhi, and H.J. Alqallaf Building roof with conical holes containing PCM to reduce the cooling load: numerical study Energy Convers. Manag. 52 2011 2958 2964
42. F. Kuznik, and J. Virgone Experimental investigation of wallboard containing phase change material: data for validation of numerical modeling Energy Build. 41 2009 561 570
43. G. Diarce, A. Urresti, A. García-Romero, A. Delgado, A. Erkoreka, C. Escudero, and Á. Campos-Celador Ventilated active façades with PCM Appl. Energy 109 2013 530 537
44. S. Álvarez, L.F. Cabeza, A. Ruiz-Pardo, A. Castell, and J.A. Tenorio Building integration of PCM for natural cooling of buildings Appl. Energy 109 2013 514 522
45. Y. Li, and S. Liu Experimental study on thermal performance of a solar chimney combined with PCM Appl. Energy 114 2014 172 178
46. M. Jaworski, P. Łapka, and P. Furmański Numerical modelling and experimental studies of thermal behaviour of building integrated thermal energy storage unit in a form of a ceiling panel Appl. Energy 113 2014 548 557
47. F. Ascione, N. Bianco, R.F. De Masi, F. de' Rossi, and G.P. Vanoli Energy refurbishment of existing buildings through the use of phase change materials: energy savings and indoor comfort in the cooling season Appl. Energy 113 2014 990 1007
48. X. Jin, M.A. Medina, and X. Zhang On the importance of the location of PCMs in building walls for enhanced thermal performance Appl. Energy 106 2013 72 78
49. I.P. S. v5 2007 T.e.I. Instituto Nacional de Engenharia Lisboa, Portugal
50. F.P. Incropera, and D.P. DeWitt Fundamentals of Heat and Mass Transfer 2002 J. Wiley New York, EUA
51. C.A.P. Santos, and L. Matias Coeficientes de transmissão térmica de elementos da envolvente dos edificios 2006 Laboratório Nacional de Engenharia Civil Lisboa, Portugal
52. EEC Rubitherm Safety Data Sheet Rubitherm RT18 2010 Berlin
53. D. Feldman, D. Banu, and D.W. Hawes Development and application of organic phase change mixtures in thermal storage gypsum wallboard Sol. Energy Mater. Sol. Cells 36 1995 147 157
54. Energy Performance of Buildings - Calculation of Energy Use for Space Heating and Cooling - ISO 13790:2008 2008 European Commitee for Standardization
55. BS EN 15251:2007 Indoor Environmental Input Parameters for Design and Assessment of Energy Performance of Buildings Addressing Indoor Air Quality, Thermal Environment, Lighting and Acoustics 31 July 2008 BSI 56