Comparison of preliminary designs of stiffened panels optimized using PANDA2 for reusable launch vehicle propellant tanks

41st Structures, Structural Dynamics, and Materials Conference and Exhibit

Volumn , Issue , 2000, Pages

  Lamberti, Luciano ^a,c   Venkataratnan, Satchi ^a   Haftka, Raphael T ^a   Johnson, Theodore F ^b  

^a UNIVERSITY OF FLORIDA   (United States)

^b NASA LANGLEY RESEARCH CENTER   (United States)

^c POLITECNICO DI BARI   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

ANALYSIS AND MODELING; CONCEPTUAL DESIGN PHASE; GEOMETRIC IMPERFECTION; LIQUID HYDROGEN TANKS; MODEL AND ANALYSIS; PRELIMINARY DESIGN; REUSABLE LAUNCH VEHICLES; STRUCTURAL CONCEPT;

CONCEPTUAL DESIGN; LAUNCHING; LIQUEFIED GASES; REUSABILITY; REUSABLE ROCKETS; STRUCTURAL DYNAMICS; STRUCTURAL PANELS; TANKS (CONTAINERS);

OPTIMIZATION;

EID: 84896837198     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (57)

1. Agarwal, B, and Davis, RC, "Minimum Weight Designs for Hat Stiffened Composite Panels under Axial Compression, " NASA-TN D-7779, Washington, D.C., Nov. 1974.
2. Almroth, BO, and Brogan FA., "The STAGS Computer Code, " NASA CR-2950, NASA Langley Research Center, Hampton, VA, 1978.
3. Anderson, S., and Stroud, WJ, "General Panel Sizing Computer Code and Its Application to Composite Structural Panels, " AIAA J., 17 (8), 892-897, 1979.
4. Anon, MSC/NASTRAN Quick Reference Guide, Version 68, The MacNeal-Schwendler Corporation. 1994.
5. Arbocz, J, "The Effect of Initial Imperfections on Shell Stability-An updated Review, " Report LR-695, Delft University of Technology, Faculty of Aerospace Engineering, The Netherlands, Sep 1992.
6. Arbocz, J, and Hoi, JMAM., "Shell Stability Analysis in a computer Aided Engineering (CAE) Environment, " AIAA Paper 93-1333-CP, Proc 34th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics and Materials Conf, La Jolla, CA, April 1993, 300-314.
7. Arendsen, P, Thuis, HGSJ, and Wiggenraad, JFM, "Optimization of Composite Stiffened Panels with Postbuckling Analysis, " Proc 4th International Conf on Computer Aided Design in Composite Material Technology, Southampton, UK, June 1994, 109-120.
8. Baruch, M, and Singer, J, "Effect of Eccentricity of Stiffeners on the General Instability of Stiffened Cylindrical Shells under Hydrostatic Pressure, " J. of Mech. Eng. Sci., 5, 23-27, 1963.
9. Bushnell, D, "Evaluation of Various Analytical Models for Buckling and Vibration of Stiffened Shells, " AIAA 4J., 11(9), 1283-1291, 1973.
10. Bushnell, D, "BOSOR4: program for stress, buckling, and vibration of complex shells of revolution, " Structural Mechanics Software Series, Vol. 1 (edited by N. Perrone and W. Pilkey) University Press of Virginia, Charlottesville, Virginia, 1977.
11. Bushnell, D, "PANDA2-Program for Minimum Weight Design of Stiffened, Composite, Locally Buckled Panels, " Comp, and Struc., 25(4), 469-605, 1987.
12. Bushnell, D, "Theoretical Basis of the PANDA Computer Program for Preliminary Design of Stiffened Panels Under Combined In-plane Loads, " Comput. and Struct., 27(4), 541-563, 1987.
13. Bushnell, D, "Nonlinear Equilibrium of Imperfect, Locally Deformed Stringer-Stiffened Panels Under Combined Loads, " Comput. Struct., 27(4), 519-539, 1987.
14. Bushnell, D, "Truss Core Sandwich Design Via PANDA2, " Comput. Struct., 44(5), 1091-1119, 1992.
15. Bushnell, D, "Optimization of Composite, Stiffened, Imperfect Panels Under Combined Loads for Service in the Postbuckling Regime, " Comput Meth Appl Mech Engng, 103, 43-114, 1993.
16. Bushnell, D, "Recent Enhancements to PANDA2 (A Program for Minimum Weight Structural Design), " Proc AIAA/ ASME/ ASCE/ AHS/ ASC 37th Structures, Structural Dynamics and Materials Conf, AIAA paper 96-1337, Salt Lake City, UT, April 1996.
17. Bushnell, D, "Optimum Design Via PANDA2 of Composite Stiffened Sandwich Panels with Honeycomb or Foam Cores" Proc 38ltl AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics and Materials Conf, AIAA Paper 97-1142, Kissimmee, FL, April 1997, 2163-2202.
18. Bushnell, D, "Optimization of Panels with Riveted Z-shaped Stiffeners via PANDA2, " Proc 39th AIAA/ ASME/ ASCE/ AHS/ASC Structures, Structural Dynamics & Materials Conf, AIAA Paper 98-1990, April 1998, 2357-2388.
19. Bushnell, D, "Additional Buckling Solutions in PANDA2" Proc 4th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics and Materials Conf, AIAA Paper 99-1233, St. Louis, Missouri, April 1999, 302-345.
20. Bushnell, D, and Bushnell, WD., "Minimum Weight Design of a Stiffened Panel via PANDA2 and Evaluation of the Optimized Panel via STAGS, " Comput Struct, Vol. 50, No. 4, 1994, 569-602.
21. Bushnell, D, and Bushnell, WD, "Optimum design of Composite Stiffened Panels under combined loads, " Comput Struct, 55(5), 819-856, 1995.
22. Bushnell, D, and Bushnell, WD, "Approximate Method for the Optimum Design of Ring and Stringer Stiffened Cylindrical Panels and Shells with Local, Inter-Ring, and General Buckling Modal Imperfections, " Comput Struct, 59(3), 489-527, 1996.
23. Bushnell, D, Holmes, AMC, Flaggs, DL, and McCormick, PJ, "Optimum Design, Fabrication and Test of Graphite-Epoxy, Curved Stiffened, Locally Buckled Panels Loaded in Axial Compression, " in Buckling of Structures, Elishakoff, I. et al., eds., Elsevier, Amsterdam, 61-131, 1988.
24. Bushnell, D, Rankin, CC, and Riks, E, "Optimization of Stiffened Panels in which Mode Jumping is Accounted For", Proc 38th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics and Materials Conf, AIAA-97-1141, Kissimmee, FL, April 1997, 2123-2162.
25. Butler, R, and Williams, FW, "Optimum Design Using VICONOPT, a Buckling and Strength Constraint Program for Prismatic Assemblies of Anisotropic Plates, " Comput. Struct., 43(4), 699-708, 1992.
26. Cohen, GA, "FASOR A-A Program for Stress, Buckling and Vibration of Shells of Revolution, " Advanced Engineering Software, 3(4), 155-162, 1981.
27. Chryssanthopoulos, MK, Baker, MJ, and Dowling, PJ, "Imperfection Modeling for Buckling Analysis of Stiffened Cylinders, " J. of Structural Engineering, 117(7), 1998-2017, 1991.
28. Dawe, DJ, Wang, S, "Postbuckling Analysis of Thin Rectangular Laminated Plates by Spline FSM, " Thin Walled Struct, 30(1-4), 159-179, 1998.
29. Elseifi, MA, Gílrdal, Z, and Nikolaidis, E, "Convex/Probabilistic Models of Uncertainties in Geometric Imperfections of Stiffened Composite Panels, " AIAA J., 37(4), 468-474, 1999.
30. Elseifi, MA, Gürdal, Z, and Nikolaidis, E, "A New Scheme for the Optimum Design of Stiffened Composite panels with Geometric Imperfections, " Proc 40th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics and Materials Conf. AIAA-99-1257, St. Louis, MO, April 1999, 588-600.
31. Graesser, DL, and Tuttle, ME, "Damage Tolerance of Composite Structures, " Proc of the 35 h AIAA/ ASME/ ASCE/ AHS/A SC Structures, Structural Dynamics and Materials Conf, AIAA Paper 94-1497, April 1994, Hilton Head, SC, 1434-1444
32. Harrison, PN, Le Riche, R, and Haftka, RT, "Design of Stiffened Composite Panels by Genetic Algorithm and Response Surface Approximations, " Proc 36th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics and Materials Conf, AIAA Paper 96-1163-CP, New Orleans, LA, April 1995, 58-68.
33. Hutchinson, JW, and Amazagio, JC, "Imperfection Sensitivity of Eccentrically Stiffened Cylindrical Shells, " AIAA J., 5(3), 392-401, 1967.
34. Jaunky, N, Knight, NF, Jr., and Ambur, DR, "Optimal Design of Grid Stiffened Composite Panels Using Global and Local Buckling Analyses, " J of Aircraft, 35(3), 478-486, 1998.
35. Jaunky, N, Knight, NF, Jr., and Ambur, DR, "Optimal Design of General Stiffened Composite Circular Cylinders for Global Buckling with Strength Constraints, " Composite Structures, 41, 243-252, 1998.
36. Jiang, H, "Analysis and Design of Composite Sandwich panels using PANDA2, " M. S. Thesis, Aerospace Engineering, Old Dominion University, Norfolk, VA, 1998.
37. Kassapoglou, C, "Simultaneous Cost and Weight Minimization of Composite-Stiffened Panels under Compression and Shear, " Composites, Part A, 28(A), 419-435, 1997.
38. Kim, GL, and Tuttle, ME, "Buckling Analysis for a Stiffened Panel, " Proc 35th AIAA/ ASME/ ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conf, AIAA Paper 94-1496, April 1994, Hilton Head, SC, 1423-1433.
39. Lamberti, L, Venkataraman, S, and Haftka, RT, "Comparison of Preliminary Designs of Reusable Launch Vehicle Propellant Tank Stiffened Panels Optimized using PANDA2, " Technical Report AeMES-TR-99-3-01, Department of Aerospace Engineering, Mechanics and Engineering Science, University of Florida, Gainesville, Florida, 1999.
40. Li, Y-W, Elishakoff, I, Starnes, JH, Jr., and Bushnell, D., "Effect of Thickness Variation and Initial Imperfection on Buckling of Composite Cylindrical Shells: Asymptotic Analysis and Numerical Results by BOSOR4 and PANDA2, " Inti J. of Solid and Struct, 34(28), 3755-3767, 1997.
41. Nagendra, S, Jestin, D, Gürdal, Z, Haftka, RT, and Watson, L.T., "Improved Genetic Algorithm for the Design of Stiffened Composite Panels, " Comput Struct, 58(3), 543-555, 1996.
42. Perry, C, Gürdal, Z, and Starnes, JH, Jr., "Minimum Weight Design of Compressively loaded Stiffened Panels for Postbuckling Response, " Engng. Optim., 28, 175-197, 1997.
43. Rankin, CC, and Brogan, FA, " An Element Independent Corotational Procedure for Treatment of Large Rotations, "J. of Press. Vessel Tech., 108, 165-174, 1986.
44. Rankin, C.C., Stehlin, P., and Brogan, FA, "Enhancements to the STAGS computer code, " NASA CR 4000, NASA Langley Research Center, Hampton, VA, 1986.
45. Stoll, F, and Gürdal, Z, "Nonlinear Analysis of Compressively Loaded Linked-Plate Structures, " AIAA Paper 90-0968-CP, Proc AIAA/ ASME/ ASCE/ AHS/ ASC 31s' Structures, Structural Dynamic and Materials Conf, Long Beach, CA, April 1990, 903-913.
46. Stroud, W. J., and Agranoff, N., "Minimum-Mass Design of Filamentary Composite Panels Under Combined Loads: Design Procedure Based on Simplified Buckling Equations, " NASA-TN D-8257, Oct. 1976.
47. Stroud, W. J., and Agranoff, N., "Minimum-Mass Design of Filamentary Composite Panels Under Combined Loads: Design Procedure based on a Rigorous Buckling Analysis, " NASA-TN D-8417, July 1977.
48. Sun, G., and Mao, R., "Optimization of Stiffened Laminated Composite Circular Cylindrical Shells for Buckling, " Composite Structures, 23, 53-60, 1993.
49. Tomashevskii, V. T., Anufiïev, A. P., Shalygin, V. N., Yakolev, V. S., and Kalimulin, R. I., "Optimization of Reinforced Cylindrical Shells Made of Composites, " Mech. of Comp. Mater., 23 (5), 603-607, 1987.
50. Van der Neut, A, "The Interaction of Local Buckling and Column Failure of Thin-Walled Compression Members, " Proc of XII Inti Cong on Appl Mech, Stanford, 1968, 389-399.
51. Vanderplaats, GN, "ADS-A FORTRAN Program for Automated Design Synthesis-Version 1.10, " NASA CR-177985, 1985.
52. Venkataraman, S, "Modeling, Analysis and Optimization of Cylindrical Stiffened Panels for Reusable Launch Vehicle Structures, " Ph.D. Dissertation, University of Florida, Dec. 1999.
53. Wiggenraad, IFM, Arendsen, P, and da Silva Pereira, JM, "Design Optimization of Stiffened Composite Panels With Buckling And Damage Tolerance Constraints, " Proc of the 39th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics, and Materials Conf, Part 1 (of 4), AIAA-98-1750, April 1998, Long Beach, California, 420-429.
54. Williams, FW, Kennedy, D, and Anderson, MS, "Analysis Features of VICONOPT, an Exact Buckling and Vibration Program for Prismatic Assemblies of Anisotropic Plates, " AIAA Paper 0970, Proc of the 31st AIAA / ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics and Materials Conf, Long Beach, CA, 1990, 920-929.
55. Wittrick, WH, and Williams, FW, "Buckling and Vibration of Anisotropic or Isotropic Plate Assemblies Under Combined Loading, " Int. J. of Mech. Sci., 16(4), 209-239, 1974.
56. Zabinsky, Z.B., "Global Optimization for Composite Structural Design, " AIAA Paper 94-1494, Proc 35th AIAA/ ASME/ ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conf, Hilton Head, SC, April 1994, 1406-1412.
57. Zabinsky, Z.B., Graesser, D. L., Tuttle, M. E., and Kim, G. I., "Global Optimization of Composite Laminates Using Improving Hit and Run, " Recent Advances in Global Optimization (editors Floudas, C., and Pardalos, P.), Princeton University Press, Princeton, 1992, 343-368.