Corrosion resistance of siloxane-poly(methyl methacrylate) hybrid films modified with acetic acid on tin plate substrates: Influence of tetraethoxysilane addition

Applied Surface Science

Volumn 298, Issue , 2014, Pages 1-11

  Kunst, S R ^a   Cardoso, H R P ^a   Oliveira, C T ^b   Santana, J A ^c   Sarmento, V H V ^c   Muller, I L ^a   Malfatti, C F ^a  

^a FEDERAL UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

^b University Feevale   (Brazil)

^c FEDERAL UNIVERSITY OF SERGIPE   (Brazil)

Author keywords

Acetic acid; Corrosion resistance; EIS; Hybrid organic inorganic film coatings; TEOS; Tin plate

Indexed keywords

ACETIC ACID; ACID RESISTANCE; ACRYLIC MONOMERS; BENZOYL PEROXIDE; CORROSION RESISTANCE; DIFFUSION COATINGS; ELECTROCHEMICAL CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; ESTERS; FILM PREPARATION; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HYDROLYSIS; INORGANIC COATINGS; ORGANIC-INORGANIC MATERIALS; PH; SCANNING ELECTRON MICROSCOPY; SODIUM CHLORIDE; SOL-GEL PROCESS; SOL-GELS; TIN PLATE;

ANTI-CORROSIVE COATINGS; ELECTROCHEMICAL BEHAVIORS; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY MEASUREMENTS; FOURIER TRANSFORM INFRA RED (FTIR) SPECTROSCOPY; HYBRID ORGANIC-INORGANIC; POLY(METHYL METHACRYLATE) (PMMA); POLYMERIZATION OF METHYL METHACRYLATE; TEOS;

CORROSION RESISTANT COATINGS;

EID: 84896733269     PISSN: 01694332     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apsusc.2013.09.182     Document Type: Article

References (38)

1. Companhia Siderúrgica Nacional - CSN. Aplicações, Aplicações. (2005).
2. 3 Corros. Sci. 48 2006 3740 3758
3. Y. Endo, JP, T. Sakai, JP, K. Takase, JP, United States Patent: 6960247 - Chromium-free water reducible rust inhibitive paint for metals, 6960247, 2005.
4. E. Maze, FR, C. Mocquery, FR, B. Millet, FR, et al., United States Patent: 7081157 - Use of MoO.sub.3 as corrosion inhibitor, and coating composition containing such an inhibitor, 7081157, 2006.
5. Y. Endo, JP, T. Sakai, JP, United States Patent: 7189465 - Chromium-free metal surface treatment agent, 7189465, 2007.
6. S. Ono, H. Tsuge, Y. Nishi, and S. Hirano Improvement of corrosion resistance of metals by an environmentally friendly silica coating method J. Sol-Gel Sci. Technol. 29 2004 147 153
7. EPA - Environmental Protection Agency, 1988.
8. H. Hu, N. Li, J. Cheng, and L. Chen Corrosion behavior of chromium-free dacromet coating in seawater J. Alloys Compd. 472 2009 219 224
9. W. Trabelsi, L. Dhouibi, E. Triki, M.G.S. Ferreira, and M.F. Montemor An electrochemical and analytical assessment on the early corrosion behaviour of galvanised steel pretreated with aminosilanes Surf. Coat. Technol. 192 2005 284 290
10. R.T. Sakai, F.M.D.L. da Cruz, H.G. de Melo, A.V. Benedetti, C.V. Santilli, and P.H. Suegama Electrochemical study of TEOS, TEOS/MPTS, MPTS/MMA and TEOS/MPTS/MMA films on tin coated steel in 3.5% NaCl solution Prog. Org. Coat. 74 2012 288 301
11. P.H. Suegama, V.H.V. Sarmento, M.F. Montemor, A.V. Benedetti, H.G. de Melo, and I.V. Aoki et al. Effect of cerium (IV) ions on the anticorrosion properties of siloxane-poly(methyl methacrylate) based film applied on tin coated steel Electrochim. Acta 55 2010 5100 5109
12. H. Dóhler, M. Ferenz, S. Herweth, Patente PI0603786-0A - Utilização de silanos epóxi-funcionais como aditivos de aderência para revestimentos de liberação de silicone, 2007.
13. D. Cangialosi, P. McGrail, G. Emmerson, A. Valenza, E. Calderaro, and G. Spadaro Properties and morphology of PMMA/ABN blends obtained via MMA in situ polymerisation through γ-rays Nucl. Instrum. Methods Phys. Res. Sect. B: Beam Interact. Mater. Atoms 185 2001 262 266
14. 2 on morphology of compatible crystalline/amorphous PEO/PMMA blends J. Supercrit. Fluids 28 2004 101 112
15. A. Ershad-Langroudi, S. Gharazi, A. Rahimi, and D. Ghasemi Synthesis and morphological study on the nanocomposite hydrophilic coatings Appl. Surf. Sci. 255 2009 5746 5754
16. S. Kozhukharov, V. Kozhukharov, M. Schem, M. Aslan, M. Wittmar, and A. Wittmar et al. Protective ability of hybrid nano-composite coatings with cerium sulphate as inhibitor against corrosion of AA2024 aluminium alloy Prog. Org. Coat. 73 2012 95 103
17. M. Fedel, M.-E. Druart, M. Olivier, M. Poelman, F. Deflorian, and S. Rossi Compatibility between cataphoretic electro-coating and silane surface layer for the corrosion protection of galvanized steel Prog. Org. Coat. 69 2010 118 125
18. M.F. Montemor, and M.G.S. Ferreira Electrochemical study of modified bis-[triethoxysilylpropyl] tetrasulfide silane films applied on the AZ31 Mg alloy Electrochim. Acta 52 2007 7486 7495
19. S. Gu, T. Kondo, and M. Konno Preparation of silica-polystyrene core-shell particles up to micron sizes J. Colloid Interface Sci. 272 2004 314 320
20. J.-L. Luna-Xavier, A. Guyot, and E. Bourgeat-Lami Synthesis and characterization of silica/poly (methyl methacrylate) nanocomposite latex particles through emulsion polymerization using a cationic azo initiator J. Colloid Interface Sci. 250 2002 82 92
21. H. Sertchook, and D. Avnir Submicron silica/polystyrene composite particles prepared by a one-step sol-gel process Chem. Mater. 15 2003 1690 1694
22. S.R. Kunst, R.F. Dos Santos, D. Vieira, C.T. Oliveira, V.H. Vitorino, and C.F. Malfatti Elaboration and characterization of siloxane-PMMA hybrid films on tinplate substrates Materials Science Forum 727-728 2012
23. E.J.A. Pope, and J.D. Mackenzie Sol-gel processing of silica: II. The role of the catalyst J. Non-Cryst. Solids 87 1986 185 198
24. X. Zhang, Y. Wu, S. He, and D. Yang Structural characterization of sol-gel composites using TEOS/MEMO as precursors Surf. Coat. Technol. 201 2007 6051 6058
25. S. Zaioncz Relationships between nanostructure and dynamic-mechanical properties of epoxy network containing PMMA-modified silsesquioxane Express Polym. Lett. 3 2009 340 351
26. M. Wang, D. He, H. Xie, and L. Fu Characterization of bis-[triethoxysilylpropyl] tetrasulfide layers on aluminum based on water-based silanization solution Thin Solid Films 520 2012 5610
27. J. Flis, and M. Kanoza Electrochemical and surface analytical study of vinyl-triethoxy silane films on iron after exposure to air Electrochim. Acta 51 2006 2338 2345
28. W.J. van Ooij, D. Zhu, M. Stacy, A. Seth, T. Mugada, and J. Gandhi et al. Corrosion protection properties of organofunctional silanes - an overview Tsinghua Sci. Technol. 10 2005 639 664
29. F. Xia, and S.A. Xu Effect of surface pre-treatment on the hydrophilicity and adhesive properties of multilayered laminate used for lithium battery packaging Appl. Surf. Sci. 268 2013 337 342
30. 2 nanoparticles on mild steel in 3.5% NaCl solution Corros. Sci. 53 2011 89 98
31. P. Hammer, M.G. Schiavetto, F.C. dos Santos, A.V. Benedetti, S.H. Pulcinelli, and C.V. Santilli Improvement of the corrosion resistance of polysiloxane hybrid coatings by cerium doping J. Non-Cryst. Solids 356 2010 2606 2612
32. R.F. Sanchez Clermont Design of hybrid organic-inorganic materials synthesized via sol-gel chemistry New J. Chem. 18 1994 1007 1047
33. Functional Hybrid Materials 2004 Wiley-VCH Weinheim
34. D. Zhu, V. Ooij, and D. Wim Corrosion Protection of Metals by Silane Surface Treatment 2005 University of Cincinnati
35. W. Plieth Electrochemistry for Materials Science 1st ed. 2008 Elsevier Amsterdam, Boston
36. 3 and thermally grown oxide on nickel aluminide Mater. Sci. Eng. 372 2004 278 286
37. A. Conde, and J. de Damborenea Electrochemical impedance spectroscopy for studying the degradation of enamel coatings Corros. Sci. 44 2002 1555 1567
38. D. Xia, S. Song, J. Wang, H. Bi, Y. Jiang, and Z. Han Corrosion behavior of tinplate in NaCl solution Trans. Nonferrous Met. Soc. China 22 2012 717 724