Preparation, characterization and application of iron (III)-loaded chitosan hollow fiber membranes as a new bio-based As (V) sorbent

Journal of Polymer Research

Volumn 21, Issue 4, 2014, Pages

  Seyed Dorraji, M S ^a   Mirmohseni, A ^b   Tasselli, F ^c   Criscuoli, A ^c   Carraro, M ^d   Gross, S ^d   Figoli, A ^c  

^a UNIVERSITY OF ZANJAN   (Iran)

^b UNIVERSITY OF TABRIZ   (Iran)

^c INSTITUTE ON MEMBRANE TECHNOLOGY   (Italy)

^d UNIVERSITY OF PADOVA   (Italy)

Author keywords

Adsorptive membrane; Arsenic; Chitosan; Hollow fiber; Response surfacemethodology

Indexed keywords

ARSENIC; BIOSORPTION; CHITOSAN; KINETIC THEORY; PHOTOELECTRONS; SCANNING ELECTRON MICROSCOPY; SPINNING (FIBERS); THERMOGRAVIMETRIC ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION; X RAY PHOTOELECTRON SPECTROSCOPY;

ADSORPTION CAPACITIES; ADSORPTIVE MEMBRANES; CHITOSAN HOLLOW FIBER; DRY-WET SPINNING TECHNIQUE; HOLLOW FIBER; PSEUDO-SECOND-ORDER KINETIC MODELS; RESPONSE SURFACEMETHODOLOGY; THERMAL GRAVIMETRIC ANALYSES (TGA);

IRON COMPOUNDS;

EID: 84895777997     PISSN: 10229760     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10965-014-0399-2     Document Type: Article

References (38)

1. Chuang CL, Fan M, Xu M, Brown RC, Sung S, Saha B, Huang CP (2005) Adsorption of arsenic (V) by activated carbon prepared from oat hulls. Chemosphere 61:478-483 (Pubitemid 41394376)
2. Gérente C, Andrès Y, McKay G, Le Cloirec P (2010) Removal of arsenic (V) onto chitosan: from sorption mechanism explanation to dynamic water treatment process. Chem Eng J 158:593-598
3. Bey S, Criscuoli A, Figoli A, Leopold A, Benamor M, Drioli E, Simone S (2010) Removal of As (V) by PVDF hollow fibers membrane contactors using Aliquat-336 as extractant. Desalination 264: 193-200
4. Figoli A, Cassano A, Criscuoli A, Mozumder MSI, UddinMT, Islam MA, Drioli E (2010) Influence of operating parameters on the arsenic removal by nanofiltration. Water Res 44:97-104
5. National Research Council (2001) Arsenic in drinking water. National Academy of Sciences, Washington, DC
6. WHO (1998) Guidelines for drinking-water quality, Addendum to vol. 1, Recommendations Geneva
7. US Environmental Protection Agency (2001)Washington DC, USA. Panel 14: National Primary drinking water regulations: arsenic and clarifications to compliance and new source contaminants monitoring, vol. 66 194
8. Baskan MB, Pala A (2009) Determination of arsenic removal efficiency by ferric ions using response surface methodology. J Hazard Mater 166:796-801
9. Donia AM, Atia AA, Mabrouk DH (2011) Fast kinetic and efficient removal of As (V) from aqueous solution using anion exchange resins. J Hazard Mater 191:1-7
10. Mohan D, Pittman CU (2007) Arsenic removal from water/wastewater using adsorbents - a critical review. J Hazard Mater 142:1-53 (Pubitemid 46413512)
11. Shen C, Shen Y, Wen Y, Wang H, Liu W (2011) Fast and highly efficient removal of dyes under alkaline conditions using magnetic chitosan-Fe (III) hydrogel. Water Res 45:5200-5210
12. Jang M, Min SH, Park JK, Tlachac EJ (2007) Hydrous ferric oxide incorporated diatomite for remediation of arsenic contaminated groundwater. Environ Sci Technol 41:3322-3328 (Pubitemid 46713398)
13. Wang XL, Yang K, Tao S, Xing BS (2007) Sorption of aromatic organic contaminants by biopolymers effects of pH, copper (II) complexation, and cellulose coating. Environ Sci Technol 41:185-191 (Pubitemid 46047841)
14. Cheng R, Ou S, Xiang B, Li Y, Liao Q (2010) Equilibrium and molecular mechanism of anionic dyes adsorption onto copper (II) complex of dithiocarbamate-modified starch. Langmuir 26:752-758
15. Monier M, Ayad DM, Wei Y, Sarhan AA (2010) Preparation and characterization of magnetic chelating resin based on chitosan for adsorption of Cu (II), Co (II), and Ni (II) ions. React Funct Polym 70: 257-266
16. Gérente C, Lee VKC, Le Cloirec P, McKay G (2007) Application of chitosan for the removal ofmetals from wastewaters by adsorption - mechanisms and models review. Crit Rev Environ Sci Technol 37: 41-127 (Pubitemid 44720065)
17. Santos HHD, Demarchi CA, Rodrigues CA, Greneche JM, Nedelko N, Slawska-Waniewska A (2011) Adsorption of As (III) on chitosan- Fe-crosslinked complex (Ch-Fe). Chemosphere 82:278-283
18. Gupta A, Chauhan VS, Sankararamakrishnan N (2009) Preparation and evaluation of iron-chitosan composites for removal of As (III) and As (V) from arsenic contaminated real life groundwater. Water Res 43:3862-3870
19. Gang DD, Deng B, Lin L (2010) As (III) removal using an ironimpregnated chitosan sorbent. J Hazard Mater 182:156-161
20. Elwakeel KZ (2010) Environmental application of chitosan resins for the treatment of water and wastewater: a review. J Dispers Sci Technol 31:273-288
21. Liu C, Bai R (2006) Adsorptive removal of copper ions with highly porous chitosan/cellulose acetate blend hollow fiber membranes. J Membr Sci 284:313-322 (Pubitemid 44416538)
22. Ghyl B, Kim CW (2002) Sorption properties of the composite fibers made of PAN and chitosan. J Appl Polym Sci 84:2505-2511 (Pubitemid 34505253)
23. Vincent T, Guibal E (2001) Cr (VI) extraction using aliquat 336 in hollow fiber module made of chitosan. Ind Eng Chem Res 40:1406-1411
24. Han W, Bai R (2010) A novel method for obtaining a high concentration chitosan solution and preparing a high strength chitosan hollow fiber membrane with an excellent adsorption capacity. J Appl Polym Sci 115:1913-1921
25. Mirmohseni A, Seyed Dorraji MS, Figoli A, Tasselli F (2012) Chitosan hollow fibers as effective biosorbent toward dye: preparation and modeling. Bioresour Technol 121:212-220
26. Tasselli F, Mirmohseni A, Seyed Dorraji MS, Figoli (2013) A mechanical, swelling and adsorptive properties of dry-wet spun chitosan hollow fibers crosslinked with glutaraldehyde. React Funct Polym 73:218-223
27. Montgomery DC (2001) Design and analysis of experiments, 5th edn. John Wiley and Sons, New York
28. Kayan B, Gözmen B (2012) Degradation of acid red 274 using H2O2 in subcritical water: application of response surface methodology. J Hazard Mater 201-202:100-106
29. Wang Y, Li B, Zhou Y, Jia D, Song Y (2011) CS-Fe (II, III) complex as precursor for magnetite nanocrystal. Polym Adv Technol 22: 1681-1684
30. Isayeva I, Sarkar Das S, Chang A, DeFoe J, Do Luu HM, Vorvolakos K, Patwardhan D, Whang J, Pollack S (2010) pH effect on the synthesis, shear properties, and homogeneity of iron-crosslinked hyaluronic acidbased gel/adhesion barrier. J Biomed Mater Res B 95:9-18
31. Lee Y, Lee W (2010) Degradation of trichloroethylene by Fe (II) chelated with cross-linked chitosan in a modified Fenton reaction. J Hazard Mater 178:187-193
32. Zhu H, Jiang R, Fu Y, Guan Y, Yao J, Xiao L, Zeng G (2012) Effective photocatalytic decolorization of methyl orange utilizing TiO2/ZnO/chitosan nanocomposite films under simulated solar irradiation. Desalination 286:41-48
33. Zhang G, Qu J, Liu H, Liu R, Wu R (2007) Preparation and evaluation of a novel Fe-Mn binary oxide adsorbent for effective arsenite removal. Water Res 41:1921-1928 (Pubitemid 46528982)
34. Kosmulski M (2009) pH-dependent surface charging and points of zero charge. IV. Update and new approach. J Colloid Interface Sci 337:439-448
35. Ghevariya CM, Bhatt JK, Dave BP (2011) Enhanced chrysene degradation by halotolerant achromobacter xylosoxidans using response surface methodology. Bioresour Technol 102:9668-9674
36. Fu JF, Zhao YQ, Wu QL (2007) Optimising photoelectrocatalytic oxidation of fulvic acid using response surface methodology. J Hazard Mater 144:499-505
37. Wu J, Zhang H, Oturan N, Wang Y, Chen L, Oturan MA (2012) Application of response surface methodology to the removal of the antibiotic tetracycline by electrochemical process using carbon-felt cathode and DSA (Ti/RuO2-IrO2) anode. Chemosphere 87:614-620
38. Yetilmezsoy K, Demirel S, Vanderbei RJ (2009) Response surface modeling of Pb (II) removal from aqueous solution by Pistacia vera L.: Box-Behnken experimental design. J HazardMater 171:551-562