Elasto-plastic and damage analysis of plates and shells

Elasto-Plastic and Damage Analysis of Plates and Shells

Volumn , Issue , 2008, Pages 1-208

  Voyiadjis, George Z ^a   Woelke, Pawel ^b  

^a Louisiana State University   (United States)

^b WEIDLINGER ASSOCIATES INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84895380692     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-540-79351-9     Document Type: Book

References (216)

1. Flugge, W. (1960). Stresses in Shells. Springer, New York. Monolithic
2. Dome Institute (2005). RMF Radio Station in Poland Occupies 21st Century Facility, April 2005, http://www.monolithicdome.com/domenews/2005/rmf.html
3. Perzyna, P. (2005) The thermodynamical theory of elasto-viscoplasticity. Eng. Trans., 53, 3, 235-316, Warszawa 2005.
4. Thompson, J.M.T. and Hunt, G.W. (1984). Elastic Instability Phenomena. Wiley, New York.
5. Ugural, A.C. (1999). Stresses in Plates and Shells. McGraw-Hill Inc., New York.
6. Ugural, A.C. and Fenster, S.K. (1975). Advanced Strength and Applied Elasticity. Elsevier, New York.
7. US Navy (1996). Seawolf completes initial sea trials; Navy Wire Service-A ?1915; www.chinfo.navy.mil/navpalib/ships/submarines/seawolf/seawolf1.html
8. Wadee, K. (2005). "Khurram Wadees home page"; University of Exeter, Exeter, Devon, UK EX4 4QJ, www.ex.ac.uk/?mkwadee/mkwadee.html
9. Ashwell, D.G. and Gallagher, R.H. (Eds) (1976). Finite Elements for Thin Shells and Curved Membranes. Wiley, New York.
10. Basar, Y., Ding, Y., Schultz, R. (1992). Shear-deformation models for the finite-rotation analysis of multilayered shell structures. Modeling of Shells with Non-linear behaviour, Euromech\ Colloquium 292, 2-4 Sept. 1992, Munich, Germany.
11. Basar, Y., Ding, Y., Schultz, R. (1993). Refined shear-deformation models for composite laminates with finite rotations. Int. J. Solids Struct., 30, 19, 2611-2638.
12. Bathe, K.J. (1982). Finite Element Procedures in Engineering Analysis. Prentice-Hall, Englewood Cliffs, NJ.
13. Bathe, K.J. and Brezzi, F. (1985). On the convergence of the four-node plate bending element based on Mindlin-Reissner plate theory and a mixed interpolation. Proceedings Conference on Mathematics of Finite Elements and Applications, Academic Press, New York.
14. Bathe, K.J. and Dvorkin, E.N. (1984). A continuum mechanics based four-node shell element for general non-linear analysis. Int. J. Comp. Aided Eng. Software, 1, 1, 77-88.
15. Dennis, S.T., Palazotto, A.N. (1989). Transverse shear deformation in orthotropic cylindrical pressure vessels using a higher-order shear theory. AIAA J., 27, 10, 1441-1447.
16. Dvorkin, E.N. and Bathe, K.J. (1984) A continuum mechanics based four-node shell element for general non-linear analysis. Eng. Computation. 1, 1, 77-88.
17. Flugge, W. (1960). Stresses in Shells, 2nd edition, Springer, Berlin.
18. Gupta, A.K. and Khatua, T.P. (1978). On thick superparametric shell element. Int. J. Numer. Meths Eng., 12, 1883-1889.
19. Hu, H-C. (1984). The Variational Principles in Elasticity and its Application. Scientific Publisher, Beijing.
20. Kirchhoff, G, (1850). Uber das Gleichgewicht und die Bewegung einer elastischen Scheibe. J. Reine Angew. Math., 40, 51-58.
21. Kratzig, W.B. (1992). Best transverse shearing and stretching shell theory for nonlinear finite element simulations. Comp. Meth. Appl. Mech. Eng., 103, 135-160.
22. Kratzig,W.B., Jun, D. (2003). On best shell models-from classical shells, degenerated and multilayered concepts to 3D. Arch. Appl. Mech., 73, 1-25.
23. Lame, G. (1852). Lecons sur la theorie mathematique delasticite des corps solides, Bachelier, Paris, France., Reprint: 2006, ISBN: 2-87647-261-9.
24. Love, A.E.H., (1944). A Treatise on the Mathematical Theory of Elasticity. Dover (reprinted), New York.
25. Mindlin, R.D. (1951). Thickness-Shear and Flexural Vibrations of Crystal Plates. J. Appl. Phys., 22, 316-323.
26. Niordson, F.I. (1971). A note on the strain energy of elastic shells. Int. J. Solids Struct., 7, 1573-1579.
27. Niordson, F.I. (1978). A consistent refined shell theory. Complete Analysis and its Applications, Vekua Anniversary Volume, 421-429. Nauka, Moscow.
28. Niordson, F.I. (1985). Shell Theory. North-Holland, Amsterdam.
29. Noor, A.K. and Burton, W.S. (1989). Assessment of shear deformation theory for multilayered composite plates. Appl. Mech. Rev., 42(1), 1-13.
30. Palazotto, A.N. and Linnemann, P.E. (1991). Vibration and buckling characteristics of composite cylindrical panels incorporating the effects of a higher order shear theory. Int. J. Solids Struct., 28, 3, 341-361.
31. Reddy, J.N. (1984). A simple high-order theory for laminated composite plates. J. Appl. Mech., 51, 745-752.
32. Reddy, J.N. (1989). On refined computational models composite laminates. Int. J. Num. Meths. Eng. 27, 361-382.
33. Reissner, E. (1945). The effects of transverse shear deformation on the bending of elastic plates. J. Appl. Mech. ASME, 12, 66-77.
34. Reissner, E. (1975). On transverse bending of plates, including the effects of transverse shear deformation. Int. J. Solids Struct., 11, 569-576.
35. Sanders J.L. (1959). An improved first approximation theory of thin shells. NASA Report 24.
36. Schenck, D.R. (1999). Some Formation Problems for Linear Elastic Materials. Doctoral Dissertation, Virginia Polytechnic Institute, Blacksburg, Virginia.
37. Ugural, A.C. (1999). Stresses in Plates and Shells. McGraw-Hill, Inc., New York.
38. Voyiadjis, G.Z. and Baluch, H.M. (1981). Refined theory for flexural motions of isotropic plates. J.Sound Vib., 76, 57-64.
39. Voyiadjis, G.Z., and Kattan, P.I. (1986). Thick rectangular plates on an elastic foundation. J. Eng. Mech., ASCE, 112, 11, 1218-1240.
40. Voyiadjis, G.Z. and Kattan, P.I. (1991). Effect of transverse normal strain on the bending of thick circular plates on the elastic foundation subjected to surface loads. Int. J. Mech. Sci., 33, 6, 413-433.
41. Voyiadjis, G.Z. and Shi, G. (1991). Refined two-dimensional theory for thick cylindrical shells. Int. J. Solids Struct. 27, 261-282.
42. Voyiadjis, G.Z. and Woelke, P. (2004). A refined theory for thick spherical shells. Int. J. Solids Struct. 41, 3747-3769.
43. Voyiadjis, G.Z. and Woelke, P. (2006). General non-linear finite element analysis of thick plates and shells. Int. J. Solids Struct., 43, 2209-2242.
44. Woelke, P., Chan, K.K., Daddazio, R. and Abboud, N. (2006) Stress resultant based elastoviscoplastic thick shellmodel. 77th Shock and Vibration Symposium Proceedings, Monterrey
45. CA. Ashwell, D.G. and Sabir, A.B., (1972). A new cylindrical shell finite element based on simple independent strain functions. Int. J. Mech. Sci., 14, 171-183.
46. Belytschko, T., Liu, W.K., Ong, J.S.-J. (1984a). A consistent control of spurious singular modes in the 9-node Lagrange element for the Laplace and Mindlin plate equations. Comput. Meths. Appl. Mech. Eng., 44, 269-295.
47. Belytschko, T., Ong, J.S.-J., Liu, W.K., Kennedy, J.M. (1984b). Hourglass control in linear and non-linear problems, Comput. Meths. Appl. Mech. Eng., 43, 251-276.
48. Belytschko, T., Stolarski, H., Carpenter, N. (1984c). A C0 triangular plate element with one-point quadrature. Int. J.Num. Meths. Eng., 20, 787-802.
49. Belytschko, T., Stolarski, H., Liu, W.K., Carpenter, N., Ong, J.S.-J. (1985). Stress projection for membrane and shear locking in shell finite elements. Comput. Methods Appl. Mech. Eng., 51, 221-258.
50. Cook, R.D. (1972). Two hybrid elements for analysis of thick and thin sandwich plates. Int. J.Num. Meths. Eng., 5, 277.
51. Cook, R.D., Malkus, D.S., Plesha, M.E. (1989). Concepts and Applications of Finite Element Analysis. 3rd edition, John Wiley & Sons, New York.
52. Cook, R.D., Malkus, D.S., Plesha, M.E., Witt, R.J. (2002). Concepts and Applications of Finite Element Analysis. 4th edition, John Wiley & Sons, New York.
53. Flugge, W. (1960). Stresses in Shells. Springer, New York.
54. Hibbit, Karlson & Sorensen, Inc. (2001). Abaqus, Theory Manual, Pawtucket, RI, USA
55. Hu, H-C. (1981). The Variational Principles in Elasticity and its Application. Scientific Publisher, Beijing.
56. Hughes, T.J.R. (1987). The Finite Element Method. Prentice-Hall, Englewood-Cliffs, NJ.
57. Hughes, T.J.R. and Hinton, E. (1986). Finite Element Methods for Plate and Shell Structures. Pineridge, Swansea, UK.
58. Koiter,W.T. (1960). A consistent first approximation in general theory of thin elastic shells. In Theory of Thin Elastic Shells, First IUTAM Symp. (Edited by W.T. Koiter), pp 12-33. North-Holland, Amsterdam.
59. Lindberg, G.M., Olson, M.D., Cowper, G.R. (1969). New developments in the finite element analysis of shells. Qart. Bull. Div. Mech. Eng. Natl. Aeronautical Establishment, 4, 1-99.
60. Liu, Y., Shi, G., Tang, L. (1984). Quasi-conforming elements for thick/thin beam and plate bending problems. J. DIT, 22, 3, 79-85.
61. Lu, H. and Liu, Y. (1981). Quasi-conforming element technique applied to double curvature shallow shells. J. DIT, 20, 1.
62. MacNeal, H.R. and Harder, R.L. (1985). A proposed standard set of problems to test finite element accuracy. Finite Elements Anal. Design, 1, 3-20. North-Holland.
63. Morley, L.S.D and Morris, A.J. (1978). Conflict between finite elements and shell theory, Royal Aircraft Establishment Report. London.
64. Sanders, J.L. (1959). An improved first approximation theory of thin shells. NASA Report24
65. Scordelis, A.C. and Lo, K.S. (1969) Computer analysis of cylindrical shells. J. Am. Concrete Inst.; 61:539-561.
66. Shi, G. and Voyiadjis, G.Z. (1990). A simple C0 quadrilateral thick/thin shell element based on the refined shell theory and the assumed strain fields. Int. J. Solids Struct., 27, 3, 283-298.
67. Shi, G. and Voyiadjis, G.Z. (1991a). Geometrically nonlinear analysis of plates by assumed strain element with explicit tangent stiffness. Comput. Struct., 41, 757-763.
68. Shi, G. and Voyiadjis, G.Z. (1991b). Simple and efficient shear flexible two node arch/beam and four node cylindrical shell/plate finite element. Int. J. Num. Meth. Eng., 31, 759-776.
69. Simo, J.C.; Fox, D.D. and Rifai, M.S. (1989a). On a stress resultant geometrically exact shell model. Comp. Meth. Appl. Mech. Eng., 73, 53-92, North-Holland.
70. Simo, J.C.; Fox, D.D. and Rifai, M.S. (1989b). On a stress resultant geometrically exact shell model. Part II: The linear theory. Comp Meth. Appl. Mech. Eng., 73, 53-92, North-Holland.
71. Stolarski, H. and Belytschko, T. (1981). Reduced integration for shallow-shell facet elements. New Concepts in Finite Element Analysis, Eds. T.J.R. Hughes, et. al., ASME, New York 179-194.
72. Stolarski, H. and Belytschko, T. (1982). Membrane locking and reduced integration for curved elements. J. Appl. Mech. 49, 172-177.
73. Tang, L., Chen, W. and Liu, Y. (1980). Quasi-conforming elements for finite element analysis. J. DIT, 19, 2.
74. Tang, L., Chen, W. and Liu, Y. (1983). String net function applications and quasi conforming technique. In Hybrid and Mixed Finite Element Methods, Wiley, New York
75. Timoshenko, S.P. and Woinowsky-Krieger, S. (1959). Theory of Plates. McGraw-Hill, Inc., New York.
76. Zienkiewicz, O.C. (1971). The Finite Element in Engineering Science. McGraw-Hill, London.
77. Zienkiewicz, O.C. (1978). The Finite Element Method, McGraw-Hill, New York.
78. Argyris, J. (1982). An excursion into large rotations. Comp. Meth. Appl. Mech. Eng., 32, 85-155
79. Bathe, K.J. (1982). Finite Element Procedures in Engineering Analysis. Prentice-Hall, Englewood Cliffs, NJ.
80. Belytschko, T., Stolarski, H., Liu, W.K., Carpenter, N., Ong, J.S.-J. (1985). Stress projection for membrane and shear locking in shell finite elements. Comp. Meth. Appl. Mech. Eng., 51, 221-258.
81. Cook, R.D., Malkus, D.S., Plesha, M.E. (1989). Concepts and applications of finite element analysis. 3rd edition, John Wiley & Sons, New York.
82. Crisfield, M.A. (1991). Non-linear Finite element Analysis of Solids and Structures. Vol. 1. John Wiley & Sons Ltd, New York.
83. Flores, F.G. and Onate, E. (2001). A basic thin shell triangle with only translational DOFs for large strain plasticity. Int. J. Num. Meth. Eng., 51, 57-83.
84. Hauptmann, R., Schweizerhof, K. (1998). A systematic development of solid-shell element formulations for linear and non-linear analyses employing only displacement degrees of freedom. Int. J. Num. Meth. Engng., 42, 49-69.
85. Horrigmoe, G. and Bergan, P.G. (1978). Nonlinear analysis of free form shells by flat elements. Comp. Meth. Appl. Mech. Eng., 16, 11-35.
86. Hu, H-C. (1981). The Variational Principles in Elasticity and its Application. Scientific Publisher, Beijing.
87. Kebari, H. and Cassell, A.C. (1992). A stabilized 9-node non-linear shell element. Int. J. Num. Meth. Eng., 35, 37-61.
88. MacNeal, H.R. and Harder, R.L. (1985). A proposed stadard set of problems to test finite element accuracy. Finite Elem. Anal. Design, 1, 3-20. North-Holland.
89. Morley, L.S.D and Morris, A.J. (1978). Conflict between finite elements and shell theory. Royal Aircraft Establishment Report. London.
90. Parish, H. (1995). A continuum-based shell theory for non-linear applications. Int. J. Num. Meth. Eng., 38, 1855-1883.
91. Shi, G. and Atluri, S.N. (1988). Elasto-plastic large deformation analysis of space frames:
92. Shi, G. and Voyiadjis, G.Z. (1990). A simple C0 quadrilateral thick/thin shell element based on the refined shell theory and the assumed strain fields. Int. J. Solids Struct., 27, 3, 283-298.
93. Shi, G. and Voyiadjis, G.Z. (1991a). Geometrically nonlinear analysis of plates by assumed strain element with explicit tangent stiffness. Comp. Struct., 41, 757-763.
94. Shi, G. and Voyiadjis, G.Z. (1991b). Simple and efficient shear flexible two node arch/beam and four node cylindrical shell/plate finite element. Int. J. Num. Meth. Eng., 31, 759-776.
95. Simo, J.C.; Fox, D.D. and Rifai, M.S. (1989a). On a stress resultant geometrically exact shell model. Comp. Meth. Appl. Mech. Eng., 73, 53-92. North-Holland
96. Simo, J.C.; Fox, D.D. and Rifai, M.S. (1989b). On a stress resultant geometrically exact shell model. Part II: The linear Theory. Comp Meth. Appl. Mech. Eng., 73, 53-92. North-Holland
97. Simo, J.C.; Fox, D.D. and Rifai,M.S. (1990). On a stress resultant geometrically exact shell model. Part III: Computational Aspects of the Nonlinear Theory. Comp. Meth. Appl. Mech. Eng., 79, 21-70. North-Holland
98. Tang, L., Chen, W. and Liu, Y. (1980). Quasi-conforming elements for finite element analysis. J. DIT, 19, 2.
99. Tang, L., Chen, W. and Liu, Y. (1983). String net function applications and quasi conforming technique. In Hybrid and Mixed Finite Element Methods, Wiley, New York.
100. Voyiadjis, G.Z. and Woelke, P. (2006). General non-linear finite element analysis of thick plates and shells. Int. J. Solids Struct., 43, 2209-2242.
101. Armstrong, P.J. and Frederick, C.O. (1966). A Mathematical Representation of the Multiaxial Bauschinger Effect. (CEGB Report RD/B/N/731). Berkeley Laboratories, R&D Department, California.
102. Atkatsh, R.S., Bieniek, M.P., Sandler, I.S. (1982). Theory of Viscoplastic Shells for Dynamic Response. Technical report DNA-TR-81-50, Weidlinger Associates, New York.
103. Atkatsh, R.S., Bieniek, M.P., Sandler, I.S. (1983). Theory of Viscoplastic Shells for Dynamic Response. J. Appl. Mech., 50, 131-136.
104. Bieniek, M.P. and Funaro, J.R. (1976). Elasto-plastic behaviour of plates and shells. Technical Report DNA 3584A, Weidlinger Associates, New York.
105. Bieniek,M.P. and Funaro, J. R., Baron, M.L. (1976). Numerical Analysis of the Dynamic Response of Elasto-Plastic Shells. Technical Report No. 20, November 1976, Weidlinger Associates, New York.
106. Chen, W. and Han, D. (1988). Plasticity for Structural Engineers. Springer-Verlag, New York.
107. Crisfield, M.A. (1981a). Finite element analysis for combined material and geometric nonlinearities. In W. Wunderlich et al. (eds.) Nonlinear Finite Element Analysis in Structural Mechanics, Springer-Verlag, New York, pp. 325-338.
108. Crisfield, M.A. (1981b). A fast incremental/iterative solution procedure that handles snapthrough. Comp. Stuct., 13, 55-62.
109. Crisfield, M.A. (1991). Non-linear Finite element Analysis of Solids and Structures. Vol. 1. John Wiley & Sons Ltd, New York.
110. Drucker, D.C. (1954). Limit Analysis of Cylindrical Shells Under Axially Symmetric Loading. Proc. 1st Midwestern Conf. Solid Mech., Urbana, Illinoi, pp. 158-163.
111. Hibbit, Karlson & Sorensen, Inc. (2001). Abaqus, Theory Manual, Pawtucket, RI, USA.
112. Hodge, P.G. (1959). Plastic Analysis of Structures. McGraw-Hill, New York
113. Iliushin, A.A. (1956). Plastichnost, Gostekhizdat, Moscow (in Russian).
114. Owen, D.R.J. and Hinton, E. (1980). Finite Elements in Plasticity: Theory and Practice, Pineridge Press, Swansea, UK.
115. Shi, G. and Voyiadjis, G.Z. (1992). A simple non-layered finite element for the elasto-plastic analysis of shear flexible plates. Int. J. Num. Meth. Eng., 33, 85-99.
116. Tang, L., Chen, W. and Liu, Y. (1980). Quasi-conforming elements for finite element analysis. J. DIT, 19(2).
117. Tang, L., Chen, W. and Liu, Y. (1983). String net function applications and quasi conforming technique. In Hybrid and Mixed Finite Element Methods, Wiley, NY.
118. Ueda, Y. and Yao, T. (1982). The plastic node method of plastic analysis. Comp. Meth. Appl. Mech. Eng. 34, 1089-1104.
119. Voyiadjis, G.Z. and Woelke, P. (2006). General non-linear finite element analysis of thick plates and shells. Int. J. Solids Struct., 43, 2209-2242.
120. Woelke, P. and Voyiadjis, G.Z. (2005). A stress resultant based yield surface with kinematic hardening and isotropic damage due to microvoids for isotropic plates and shells. Proceedings of McMat2005, 2005 Joint ASME/ASCE/SES Conference on Mechanics and Materials, June 1-3, Baton Rouge, Louisiana, USA.
121. Woelke, P., Chan, K.K., Daddazio, R., Abboud, N. (2006) "Stress Resultant Based Elasto-Viscoplastic Thick Shell Model." 77th Shock and Vibration Symposium Proceedings, Monterrey, CA.
122. Abu Al-Rub, R.K. and Voyiadjis, G. (2003). On the coupling of anisotropic damage and plasticity models for ductile materials. Int. J. Solids Struct., 40, 11, 2611-2643.
123. Armstrong, P.J. and Frederick, C.O. (1966). A Mathematical Representation of the Multiaxial Bauschinger Effect. (CEGB Report RD/B/N/731). Berkeley Laboratories, R&D Department, California.
124. Beachem, C.D. (1963). An electron fractographic study of the influence of plastic strain conditions upon ductile rapture processes in metals. Trans. A.S.M., 56, 318-326.
125. Bieniek, M.P. and Funaro, J.R. (1976). Elasto-plastic behaviour of plates and shells. Technical Report DNA 3584A, Weidlinger Associates, New York.
126. Bieniek, M.P., Funaro, J.R., Baron, M.L. (1976). Numerical Analysis of the Dynamic Response of Elasto-Plastic Shells. Technical Report No. 20, November 1976, Weidlinger Associates, New York.
127. Bluhm, J.I., and Morrissey, R.J. (1965). Fracture in a Tensile Specimen. Proc. First Int. Conf. On Fracture, Sendai, Japan, September. In T. Yakobori, T. Kawasaki and J.L. Swedlow (eds.), Vol. 3, pp. 1739-1780.
128. Crisfield, M.A. (1981a). Finite element analysis for combined material and geometric nonlinearities. In W. Wunderlich et al. (eds.) Nonlinear Finite Element Analysis in Structural Mechanics, Springer-Verlag, New York, pp. 325-338.
129. Crisfield, M.A. (1981b). A fast incremental/iterative solution procedure that handles snapthrough. Comp. Stuct., 13, 55-62.
130. Crisfield, M.A. (1983). An arc-length method including line searches and accelerations. Int. J. Num. Meth. Eng., 19, 1269-1289.
131. Crisfield, M.A. (1991). Non-linear Finite Element Analysis of Solids and Structures. Vol. 1. John Wiley & Sons Ltd, New York.
132. Doghri, I. (2000). Mechanics of Deformable Solids: Linear and Nonlinear, Analytical and Computational Aspects. Springer, Germany.
133. Dornowski, W. and Perzyna P. (2000). Localization phenomena in thermo-viscoplastic flow processes under cyclic dynamic loadings. Comp. Assis. Mech. Eng. Sci., 7, 117-160.
134. Duszek-Perzyna, M.K. and Perzyna, P. (1993). Adiabatic shear band localization in elastic-plastic single crystals. Int. J. Solids Struct., 30, 1, 61-89.
135. Duszek-Perzyna, M.K. and Perzyna, P. (1994). Analysis of the influence of different effects on criteria for adiabatic shear band localization in inelastic solids. In R.C. Batra and H.M. Zbib (eds.). Material Instabilities: Theory and Applications, ASME Congress, Chicago, 9-11 November. AMD-Vol. 183/MD-Vol. 50, pp. 59-85.
136. Duszek-Perzyna, M.K. and Perzyna, P. (1998). Analysis of anisotropy and plastic spin effects on localization phenomena. Arch. Appl. Mech., 68, 352-374, Springer-Verlag, New York.
137. Fisher, J.R. (1980). Void Nucleation in Spheroidized Steels During Tensile Deformation. Ph.D. Thesis, Brown University.
138. Gurland, J. and Plateau, J. (1963). The Mechanism of Ductile Rupture of Metals Containing Inclusions. Trans. A.S.M., 56, 443-454.
139. Gurson, A.L. (1975). Plastic flow and fracture behaviour of ductile materials incorporating void nucleation, growth and interaction, PhD Thesis, Brown University.
140. Gurson, A.L. (1977). Continuum theory of ductile rapture by void nucleation and growth-Part I-Yield criteria and flow rules for porous ductile media. J. Eng. Mater. Technol., 99, 2-15.
141. Iliushin, A.A. (1956). Plastichnost, Gostekhizdat, Moscow (in Russian).
142. Lubarda, V.A. and Krajcinovic, D. (1993). Damage tensors and the crack density distribution. Int. J. Solids Struct., 30, 2859-2877.
143. Murakami, S. (1988). Mechanical modeling of material damage. J. Appl. Mech., Transact. ASME, 55, 2, 280-286.
144. Perzyna, P. (1984b). Constitutive modeling of dissipative solids for postcritical behaviour and fracture. ASME, J. Eng. Mater. Technol., 106, 410-419.
145. Perzyna, P. and Drabik, A. (1989). Description of micro-damage process by porosity parameter for nonlinear viscoplasticity. Arch. Mech., 41, 895-908.
146. Roy, G.L., Embury, J.D., Edward, G., and Ashby, M.F. (1981). A model of ductile fracture based on the nucleation an growth of voids. Acta Metall., 29, 1509-1522.
147. Seweryn, A. and Mroz, Z. (1998). On the criterion of damage evolution for variable multiaxial stress states. Int. J. Solids Struct. 35, 1589-1616.
148. Shi, G and Voyiadjis, G.Z. (1992). A simple non-layered finite element for the elasto-plastic analysis of shear flexible plates. Int. J. Num. Meth. Eng., 33, 85-99.
149. Shi, G and Voyiadjis, G.Z. (1993). A computational model for FE ductile plastic damage analysis of plate bending. J.Appl. Mech., 60, 749-758.
150. Ueda, Y., Yao, T. (1982). The plastic node method of plastic analysis. Comp. Meth. Appl. Mech. Eng., 34, 1089-1104.
151. Voyiadjis, G.Z. and Abu-Lebdeh, (1993). Damage model for concrete using bounding surface concept. J. Eng. Mech., 119, 9, 1865-1885.
152. Voyiadjis, G.Z. and Deliktas, B. (2000a). A coupled anisotropic damage model for the inelastic response of composite materials. Comp. Meth. Appl. Mech. Eng., 183, 159-199.
153. Voyiadjis, G.Z., Deliktas, B. (2000b). Multi-scale analysis of multiple damage mechanics coupled with inelastic behavior of composite materials. Mech. Res. Commun., 27, 3, 295-300.
154. Voyiadjis, G.Z. and Kattan, P.I. (1991). Effect of transverse normal strain on the bending of thick circular plates on the elastic foundation subjected to surface loads. Int. J. Mech. Sci., 33, 6, 413-433.
155. Voyiadjis, G.Z. and Kattan, P.I. (1992a). A plasticity-damage theory for large deformations of solids. Part I: Theoretical formulation. Int. J. Eng. Sci., 30, 1089-1108.
156. Voyiadjis, G.Z. and Kattan, P.I. (1992b). Finite strain plasticity and damage in constitutive modeling of metals with spin tensors. Appl. Mech. Rev., 45, S95-S109.
157. Voyiadjis, G.Z. and Kattan, P.I. (1999). Advances in Damage Mechanics: Metals and Metal Matrix Composites. Elsevier, Oxford.
158. Voyiadjis, G.Z. and Park, T. (1997). Local and interfacial damage analysis of metal matrix composites using finite element method. Eng. Fract. Mech., 56, 4, 483-511.
159. Voyiadjis, G.Z. and Park, T. (1999). Kinematics of damage for finite strain plasticity. Int. J. Eng. Sci., 37, 7, 803-830.
160. Voyiadjis, G.Z. and Venson, A.R. (1995). Experimental damage investigaion of a SiC-Ti aluminade metal matrix composite. Int. J. Damage Mech., 4, 338-361.
161. Woelke, P. and Voyiadjis, G.Z. (2005). A stress resultant based yield surface with kinematic hardening and isotropic damage due to microvoids for isotropic plates and shells. Proceedings of McMat2005, 2005 Joint ASME/ASCE/SES Conference on Mechanics and Materials, June 1-3, Baton Rouge, Louisiana, USA.
162. Woelke, P., Voyiadjis, G.Z. and Perzyna, P. (2006). Elasto-plastic finite element analysis of shells with damage due to microvoids. Int. J. Numer. Moth. Eng., 68, 3, 338-380. 2008.
163. Woelke, P., Chan, K.K., Abboud, N., Daddazio, R., Hapij, A. and Voyiadjis, G.Z. (2006b). Damage model for analysis of isotripic shells using EPSA. 77th Shock and Vibration Symposium Proceedings, Monterrey, CA, USA.
164. Woelke, P., Abboud, N., Daddazio, R. and Voyiadjis, G. (2008). Localization, damage and fracture modeling in shell structures. Proceedings of World Congress of Computational Mechanics, Venice, Italy.
165. Allman, D.J., (1982). Improved finite element method for the large displacement bending and post buckling analysis of thin plates. Int. J. Solids Struct., 18, 737-762.
166. Argyris, J., (1982). An excursion into large rotations. Comput. Meth. Appl. Mech. Eng., 32, 85-155.
167. Bathe, K.J. and Dvorkin, Z.N., (1986). A formulation of general shell elements-The use of mixed interpolation of tensional components. IJNME, 22, 697-722.
168. Bathe, K.J. and Ho, L.W., (1981). A simple and effective element for analysis of general shell structures. J. Comp. Struct., 13, 673-681.
169. Crisfield, M.A., (1981). A fast incremental interactive solution procedure that handles snapthrough. Comp. Struct., 13, 52-62.
170. Friedrichs, K.O. and Stoker, J.J., (1942). Buckling of the circular plate beyond the critical thrust. J. Appl. Mech., ASME, 9, A7-A14.
171. Gallagher, R.H. and Thomas, G.R., (1973). The finite element in plate and shell instability analysis. Proc. Fourth Australian Conf. Mech. Struct. Materials, Brisbane, Australia, pp. 77-86.
172. Horrigmore, G. and Bergan, P.G. (1978). Nonlinear analysis of free form shells by flat elements. Comp. Meth. Appl. Mech. Eng. 16, 11-35.
173. Kim, K., and Voyiadjis, G.Z., (1999). Buckling strength prediction of CFRP cylindrical panels using finite element method. J. Compos. A: Appl. Sci. Manuf., 30, 1093-1104.
174. Kondoh, K. and Atluri, S. N., (1986). A simplified finite element method for large deformation, post-buckling analysis of large frames, using explicitly derived tangent stiffness matrices. IJNME, 23, 69-90.
175. Murray, D. W. and Willson, E. L., (1969). Finite-element post-buckling analysis of thin elastic plates. AIAA J., 7, 1915-1920.
176. Noor, A. K., Belytschko, T. and Simo, J. C., (1989). Analytical and Computational Models of Shells, ASME, New York, 640.
177. Riks, E., (1972). The application of Newtons method to the problem of elastic stability. J. Appl. Mech., ASME, 39, 1060-1066.
178. Sabir, A. B. and Lock, A. C., (1973). The application of finite elements to the large deflection geometrically non-linear behavior of cylindrical shells, In C. A. Brebbia and H. Tottenham (eds.), Variational Methods in Engineering, Southampton University Press, Southampton, Vol. 7, 66-75
179. Shi, G. and Voyiadjis, G.Z. (1990). A simple C0 quadrilateral thick/thin shell element based on the refined shell theory and the assumed strain fields. Int. J. Solids Struct., 27, 3, 283-298.
180. Shi, G. and Voyiadjis, G.Z. (1991a). Geometrically nonlinear analysis of plates by assumed strain element with explicit tangent stiffness. Comp. Struct., 41, 757-763.
181. Shi, G. and Voyiadjis, G.Z. (1991b). Simple and efficient shear flexible two node arch/beam and four node cylindrical shell/plate finite element. Int. J. Num. Meth. Eng., 31, 759-776.
182. Shi, G. and Voyiadjis, G.Z., (1991c). Efficient and accurate four-node quadrilateral C0 plate bending elements based on assumed strain fields. IJNME, 32, 1041-1055.
183. Tang, L., Chen, W. and Liu, Y. (1980). Quasi-conforming elements for finite element analysis. J. DIT, 19, 2.
184. Tang, L., Chen, W. and Liu, Y. (1983). String net function applications and quasi conforming technique. In Hybrid and Mixed Finite Element Methods, Wiley, NY.
185. von Karman, T. and Tsien, H.-S., (1939). The buckling of spherical shells by external pressure. J. Aero. Scoi., 7, 43-50.
186. Voyiadjis, G.Z. and Shi, G. (1992). Nonlinear postbuckling analysis of plates and shells by fournoded strain element. AIAA J., 30, 4, 1110-1116.
187. Wempner, G.A., (1971). Discrete approximation related to nonlinear theories of solids. Int. J. Solids Struct., 7, 1581-1599.
188. Wood, R.D. and Zienkiewicz, O.C., (1977), Geometrically nonlinear finite element analysis of beams, frames, arches, and axisymmetric shells. Comp. Struct., 7, 725-735.
189. Yang, T. Y. and Saigal, S., (1985). A curved quadrilateral element for static analysis of shells with geometric and material nonlinearities. IJNME, 21, 617-635.
190. Flanagan, D.P. and Belytschko, T. (1981), A uniform strain hexahedron and quadrilateral with orthogonal hourglass control. Int. J. Num. Meth. Eng., 17, 679-706.
191. Hardy, S. (2001) Composite Benchmarks. NAFEMS, Ref: R0031, Issue 2
192. Putcha, N.S. and Reddy, J.N. (1986). A refined mixed shear flexible finite element for the nonlinear analysis of laminated plates. Comput. Struct., 22, 4, 529-538.
193. Reddy, J.N. (1984). A simple high-order theory for laminated composite plates. J. Appl. Mech., 51, 745-752.
194. Reddy, J.N. (1989). On refined computational models composite laminates. Int. J. Num. Meths. Eng. 27, 361-382.
195. Reddy, J.N., Barbero, E.J., Teply, J.L. (1989). A plate bending element based on a generalized laminate plate theory. Int. J. Num. Meths. Eng., 28, 2275-2292.
196. Sloan, J.G. (1979). The Behavior of Rectangular Composite Material Plates Under Lateral and Hydrothermal Loads. MMAE Thesis. University of Delaware.
197. Ugural, A.C. and Fenster, S.K. (1995) Advanced Strength and Applied Elasticity. Third Edition, Prentice Hall.
198. Vaughan, D.K., "FLEX Userss Guide," Report UG8298, Weidlinger Associates, Los Altos, CA, May 1983 plus updates through 2005.
199. Vinson, J.R. and Sierakowski, R.L. (1987). The Behavior of Structures Composed of Composite Materials. Kluwer Academic Publishers, Dordrecht.
200. WAI, (1998), EPSA-III, Theoretical Guidebook. Weidlinger Associates
201. Woelke, P., Chan, K.K., Daddazio, R., Abboud, N. (2006a). Stress Resultant Based Elasto-Viscoplastic Thick Shell Model. 77th Shock and Vibration Symposium Proceedings, Monterrey, CA.
202. Woelke, P., Chan, K.K., Daddazio, R. and Abboud, N. and Voyiadjis, G.Z (2006b) Analysis of Shear Flexible Layered Isotropic and Composite Shells By EPSA. 77th Shock and Vibration Symposium Proceedings, Monterrey, CA.
203. Woelke, P., Chan, K.K., Daddazio, R., Abboud, N. and Voyaidjis, G.Z. (2008). A Simple Method of Determination of Transverse Shear Stresses and Delamination in Composite Laminates Using Finite Elements. Submitted to IJMS, December 2007.
204. Cook, R.D., Malkus, D.S., Plesha, M.E. (1989). Concepts and applications of finite element analysis. 3rd edition, John Wiley & Sons, New York.
205. Crisfield, M.A. (1981a). Finite element analysis for combined material and geometric nonlinearities. In W. Wunderlich et al. (eds.) Nonlinear Finite Element Analysis in Structural Mechanics, Springer-Verlag, New York, 325-338.
206. Crisfield, M.A. (1981b). A fast incremental/iterative solution procedure that handles snapthrough. Comp. Stuct., 13, 55-62.
207. Crisfield, M.A. (1983). An arc-length method including line searches and accelerations. Int. J. Num. Meth. Eng., 19, 1269-1289.
208. Crisfield, M.A. (1991). Non-linear Finite element Analysis of Solids and Structures. Vol. 1. John Wiley & Sons Ltd, New York.
209. Crisfield, M.A. (1997). Non-linear Finite element Analysis of Solids and Structures. Vol. 2. John Wiley & Sons Ltd, New York.
210. Ketter, R.L. and Prawel, S.P. (1969). Modern Methods of Engineering Computations.McGraw-Hill Book Company.
211. Ortiz, M. and Popov, E.P. (1985). Accuracy and stability of integration algorithms for elastoplastic constitutive relations. Int. J. Num. Meth. Eng., 21, 9, 1561-1576.
212. Owen, D.R.J. and Hinton, E. (1980). Finite Elements in Plasticity: Theory and Practice, Pineridge Press, Swansea, UK.
213. Riks, E. (1979). An incremental approach to the solution of snapping and buckling problems. Int. J. Solids Struct., 15, 529-551.
214. Voyiadjis, G.Z. and Shi, G. (1990). Finite Element Large Deformation Analysis for the Elasto-Plastic Behavior of Plates and Shells. Scientific Report No. 2, submitted to Martin Marietta Manned Space System, New Orleans, LA 70189, September 1990.
215. Wempner, G.A. (1971). Discrete approximations related to nonlinear theories of solids. Int. J. Solids Struct., 7, 1581-1599.
216. Zienkiewicz, O.C. (1978). The Finite Element Method, McGraw-Hill, NY.