Elasticity and plasticity of large deformations: An introduction

Elasticity and Plasticity of Large Deformations: An Introduction

Volumn , Issue , 2005, Pages 1-326

  Bertram, Albrecht ^a  

^a OTTO VON GUERICKE UNIVERSITY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84895305073     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/3-540-27525-8     Document Type: Book

References (314)

1. Anand, L.: Constitutive equations for hot-working of metals. Int. J. Plasticity 1, 213-231 (1985)
2. Anand, L.; Kothari, M.: A computational procedure for rate-independent crystal plasticity. J. Mech. Phys. Solids 44, 4, 525-558 (1996)
3. Antman, S. S.: Nonlinear Problems of Elasticity. Springer, New York (1995)
4. Arminjon, M.: A regular form of the Schmid law. Application to the ambiguity problem. Textures and Microstructures 14-18, 1121-1128 (1991)
5. Arruda, E. M.; Boyce, M. C: A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials. J. Mech. Phys. Solids 41, 2, 389-412 (1993)
6. Asaro, R. J.: Micromechanics of crystals and poly crystals. In: Advances in Applied Mechanics. Eds.: J. W. Hutchinson, T. Y. Wu, Academic Press 23, 1-115 (1983)
7. Asaro, R. J.: Crystal plasticity. J. Appl. Mech. 50, 921-934 (1983)
8. Atkin, R. J.; Fox, N.: An Introduction to the Theory of Elasticity. Longman, London (1980)
9. Attard, M. M.: Finite strain-isotropic hyperelasticity. Int. J. Solids Structures 40, 17, 4353-4378(2003)
10. Ball, J. M.: Convexity conditions and existence theorems in nonlinear elasticity. Arch. Rational Mech. Anal. 63, 337-403 (1977)
11. Banabic, D.; Bunge, H.-J.; Pohlandt, K.; Tekkaya, A. E.: Formability of Metallic Materials. Springer, Berlin (2000)
12. Barlat, F.; Lege, D. J.; Brem, J. C: A six-component yield function for anisotropic materials. Int. J. Plasticity 7, 693-712 (1991)
13. Baar, Y.; Weichert, D.: Nonlinear Continuum Mechanics of Solids. Springer, Berlin (2000)
14. Bassani, J. L.: Single crystal hardening. Appl. Mech. Rev. 43, 5, 2, 320-327 (1990)
15. Bassani, J. L.: Plastic flow of crystals. In: Advances in Applied Mechanics. Eds.: J. W. Hutchinson, T. Y. Wu, Academic Press 30, 191-258 (1994)
16. Beatty, M. F.: A class of universal relations in isotropic elasticity theory. J. Elasticity 17, 113-121 (1987)
17. Beatty, M. F.: Topics in finite elasticity: Hyperelasticity of rubber, elastomers, and biological tissues-with examples. Appl. Mech. Rev. 40, 12, 1699-1734 (1987)
18. Beatty, M. F.: Seven lectures on finite elasticity. In: Topics in Finite Elasticity. Eds.: M. Hayes, G. Saccomandi. CISM course 424. Springer, Wien, 31-93 (2001)
19. Bertram, A.; Haupt, P.: A Note on Andreussi-Guidugli's theory ofthermomechanical constraints in simple materials. Bull. acad. polonaise sci., Serie sci. techn. 14, 1, 47-51(1976)
20. Bertram, A.: Material systems-a framework for the description of material behavior. Arch. Rational Mech. Anal. 80, 2, 99-133 (1982)
21. Bertram, A.: Axiomatische Einfuhrung in die Kontinuumsmechanik. BI Wissenschaftsverlag, Mannheim (1989)
22. Bertram, A.: Description of finite inelastic deformations. In: Proceedings of MECAMAT' 92 Multiaxial Plasticity (1992)
23. Bertram, A.: What is the general constitutive equation? In: Beitrdge zur Mechanik. Eds.: C. Alexandra, G. Godert, U. Gom, R. Parchem, J. Villwock, TU Berlin, 28-37 (1993)
24. Bertram, A.; Kraska, M.: Determination of finite plastic deformations in single crystals. Arch. Mech. 47, 2, 203-222 (1995a)
25. Bertram, A.; Kraska, M.: Description of finite plastic deformations in single crystals by material isomorpicisms. Proceedings of lUTAM & ISIMM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics (1994)
26. in Nottingham, Kluwer Academic Publ., Eds.: D. F. Parker, A. H. England, Dordrecht, 77-90 (1995b)
27. Bertram, A.: On general frameworks for material modeling. In: Conference Papers of the 4. Int. Conf on Constitutive Laws for Engineering Materials. Eds.: R. C. Picu, E. Krempl, Troy, 46-49 (1999a)
28. Bertram, A.: An alternative approach to finite plasticity based on material isomorphisms. Int. J. Plasticity 15, 3, 353-374 (1999b)
29. Bertram, A.; Svendsen, B.: On material objectivity and reduced constitutive equations. Arch. Mech. 53, 6, 653-675 (2001)
30. Bertram, A.: Finite thermoplasticity based on isomorphisms. Int. J. Plasticity 19, 2027-2050 (2003)
31. Bertram, A.; Svendsen, B.: Reply to Rivlin's Material symmetry revisited-or Much ado about nothing. GAMM-Mitteilungen 27, 1, 88-93 (2004)
32. Bertram, A.; Bohlke, T.; Silhavy, M.: On the rank 1 convexity of stored energy functions of physically linear stress-strain relations. Preprint d. Fak. f Maschinenbau, Otto-von-Guericke Univ. Magdeburg (2005)
33. Besseling, J. F.: A thermodynamic approach to rheology. In: Irreversible Aspects of Continuum Mechanics and Transfer of Physical Characteristics in Moving Fluids. Eds.: H. Parkus, L. I. Sedov, Springer, Wien, 16-51 (1968)
34. Besseling, J. F.; Giessen, E. v. d.: Mathematical Modelling of Inelastic Deformation. Chapman & Hall, London (1994)
35. Besson, J.; Cailletaud; G.; Chaboche, J.-L.; Forest, S.: Mecanique non lineaire des materiaux. Hermes Science, Paris (2001)
36. Betten, J.: Uber die Konvexitdt von Fliefikorpern isotroper und anisotroper Stof fe. Acta Mech. 32, 233-247 (1979)
37. Betten, J.: Kontinuumsmechanik. Springer, Berlin (1993), 2nd rev. ed. (2001)
38. Billington, E. W.: Introduction to the Mechanics and Physics of Solids. Adam Hilger, Bristol (1986)
39. Bishop, J. F. W.; Hill, R.: A theory of the plastic distortion of a polycrystalline aggregate under combined stresses. Phil. Mag. Ser. 7, 42, 414-427 (1951)
40. Bishop, R. L.; Goldberg, S. I.: Tensor Analysis on Manifolds. Dover Pub., New York (1968)
41. Blume, J. A.: On the form of the inverted stress-strain law for isotropic hyperelastic solids. Int. J. Non-Linear Mechnics 27, 3, 413-421 (1992)
42. Bohlke, T.; Bertram, A.; Krempl, E.: Modeling of deformation induced anisotropy in free-end torsion. Int. J. Plasticity 19, 1867-1884 (2003)
43. Boer, R. de: Vektor-und TensorrechnungfUrlngenieure. Springer, Berlin (1982)
44. Bonet, J.; Wood, R. D.: Nonlinear Continuum Mechanics for Finite Element Analysis. Cambridge Univ. Press (1997)
45. Borisenko, A. I.; Tarapov, I.E.: Vector and Tensor Analysis with Applications. Prentice-Hall, Englewood Cliffs (1968)
46. Borst, R. de; Giessen, E. v. d. (Eds.): Material Instabilities in Solids. John Wiley & Sons, Chichester (1998)
47. Bowen, R. M.; Wang, C.-C: Introduction to Vectors and Tensors. 2 volumes. Plenum Press, New York (1976)
48. Brillouin, L.: Tensors in Mechanics and Elasticity. Acad. Press, New York (1964)
49. Brown, A. A.; Casey, J.; Nikkei, D. J.: Experiments conducted in the context of the strain-space fromulation of plasticity. Int. J. Plasticity 19, 11, 1965-2005 (2003)
50. Bruhns, O. T.; Xiao, H.; Meyers, A.: On representations of yield functions for crystals, quasicrystals and transversely isotropic solids. Eur. J. Mech. A/Solids 18, 47-67(1999)
51. Cailletaud, G.: Crystalline viscoplasticity applied to single crystals. In: Handbook of Materials Behavior Models. Vol. 1. Ed.: J. Lemaitre, 308-317 (2001)
52. Carlson, D. E.; Shield, R. T. (eds.): Finite Elasticity. Martinus Nijhoff Pub., The Hague(1982)
53. Carroll, M. M.: Finite strain solutions in compressible isotropic elasticity. J. Elasticity 20, 65-92 (1988)
54. Casey, J., Naghdi, P. M.: remark on the use of the decomposition F=Fe Fp in plasticity. J. Appl. Mech. 47, 672-675 (1980)
55. Casey, J.; Naghdi, P. M.: A prescription for the identification of finite plastic strain. Int. J. Engng. Sci. 30, 10, 1257-1278 (1992)
56. Casey, J.: On elastic-thermo-plastic materials at finite deformations. Int. J. Plasticity 14, 1-3, 173-191 (1998)
57. Chadwick, P.: Continuum Mechanics-Concise Theory and Problems. George Allen & Unwin, London (1976)
58. Choquet-Bruhat,.; de Witt-Morette, C; Dillard-Bleick, M.: Analysis, Manifolds and Physics. North Holland, Amsterdam (1977)
59. Ciarlet, P. G.: Lectures on Three-Dimensional Elasticity. Tata Inst, of Fundamental Research, Bombay (1983)
60. Ciarlet, P. G.: Mathematical Elasticity. Vol. I. North Holland, Amsterdam (1988)
61. Cleja-Tigoiu, E.; Soos, S.: Elastoviscoplastic models with relaxed configurations and internal state variables. Appl. Mech. Rev. 43, 7, 131-151 (1990)
62. Cleja-Tigoiu, S.: Large elasto-plastic deformations of materials with relaxed configurations. I. Constitutive assumptions. Int. J. Engng. Sci. 28, 3, 171-180 (1990)
63. Clifton, R. J.: On the equivalence ofF F and F F. J. Appl. Mech. 39, 287-289 (1972)
64. Coleman, B. D.; Noll, W.: Material symmetry and thermostatic inequalities in finite elastic deformations. Arch. Rational Mech. Anal. 15, 87-111 (1964)
65. Cosserat, E.; Cosserat, F.: Theorie des corps deformables. Herman et fils, Paris (1909)
66. Criscione, J. C; Humphrey, J. D.; Douglas, A. S.; Hunter, W. C: An invariant basis for natural strain which yields orthogonal stress response terms in isotropic hyperelasticity. J. Mech. Phys. Solids 48, 12, 2445-2465 (2000)
67. Dafalias, Y. F.: Corotational rates for kinematic hardening at large plastic deformations. J. Appl. Mech. 50, 561-565 (1983)
68. Daf alias, Y. F.: The plastic spin concept and a simple illustration of its role in finite plastic transformation. Mech. Materials 3, 223-233 (1984)
69. Dafalias, Y. F.: The plastic spin. J. Appl. Mech. 52, 865-871 (1985)
70. Dafalias, Y. F.: On the microscopic origin of the plastic spin. Acta Mech. 82, 31-48 (1990)
71. Dafalias, Y. F.: Plastic spin: necessity or redundancy. Int. J. Plasticity 14, 9, 909-931(1998)
72. Darrieulat, M.; Piot, D.: A method of generating analytical yield surfaces of crystalline materials. Int. J. Plasticity 12, 5, 575-610 (1996)
73. Dashner, P. A.: Invariance considerations in large strain elasto-plasticity. J. Appl. Mech. 53, 55-60 (1986a)
74. Dashner, P. A.: Plastic potential theory in large strain elastoplasticity. Int. J. Solids Structures 22, 6, 593-623 (1986b)
75. Davison, L.: Kinematics of finite elastoplastic deformation. Mech. Materials 21, 73-88(1995)
76. Del Piero, G.: On the elastic-plastic material element. Arch. Rational Mech. Anal. 59, 2, 111-130(1975)
77. Doghri, I.: Mechanics ofDeformable Solids. Springer, Berlin (2000)
78. Doyle, T. C; Ericksen, J. L.: Nonlinear Elasticity. In: Advances in Appl. Mech. IV. Eds.: H. I. Dryden, T. v. Karman, Acad. Press, NewYork, 53-115 (1956)
79. Drozdov, A. D, : Finite Elasticity and Viscoelasticity. World Scientific Pub., Singapore (1996)
80. Dunwoody, J.; On universal deformations with non-uniform temperatures in isotropic, incompressible elastic solids. Math. Mech. Solids 8, 5, 507-513 (2003)
81. Eckart, C: The thermodynamics of irreversible processes. IV. The theory of elasticity and anelasticity. Physical Review 73, 4, 373-382 (1948)
82. Ehlers, W.; Eipper, G.: The simple tension problem at large volumetric strains computed from finite hyperelastic material laws. Acta Mech. 130, 17-27 (1998)
83. Ericksen, J. L.: Deformations possible in every compressible, isotropic, perfectly elastic material J. Math. Phys. 34, 126-128 (1955)
84. Ericksen, J. L.: Tensor Fields. In: C. Truesdell, R. A. Toupin: The Classical Field Theories. In: Handbuch der Physik. Vol. III/l. Ed.: S. Fliigge, Springer, Berlin (1960)
85. Ericksen, J. L.: Introduction to the Thermodynamics of Solids. Chapman & Hall, London (1991)
86. Farren, W. S.; Taylor, G. I.: The heat developed during plastic extension of metals. Proc. Royal Soc. London, Ser. A, 107, 422-451 (1925)
87. Finger, J.: Uber die gegenseitigen Beziehungen von gewissen in der Mechanik mit Vortheil anwendbaren Fldchen zweiter Ordnung nebst Anwendungen auf Proble me der Astatik. Sitzungsber. der Kaiserl. Akad. the Wissenschaften, Mathematisch-Naturwiss. Classe 101, Ila, 1105-1142 (1892)
88. Finger, J.: Uber die allgemeinsten Beziehungen zwischen endlichen Deformationen und den zugehorigen Spannungen in aeolotropen and isotropen Substanzen. Sitzungsber. der Kaiserl. Akad. the Wissenschaften, Mathematisch-Naturwiss. Classe 103, 10, IIa, 1073-1100 (1894)
89. Fitzgerald, J. E.: A tensorial Hencky measure of strain and strain rate for finite deformations. J. Appl. Phys. 51, 10, 5111-5115 (1980)
90. Fleming, W.: Functions of Several Variables. Springer, New York (1977)
91. Fosdick, R. L.; Serrin, J.: On the impossiblity of linear Cauchy and Piola-Kirchhoff constitutive theorys for stress in solids. J. Elasticity 9, 1, 83-89 (1979)
92. Fox, N.: On the continuum theories of dislocations and plasticity. Quart. J. Mech. Appl. Math. 21, 67-75 (1968)
93. Fraeijs de Veubeke, B. M.: A Course in Elasticity. Springer, New York (1979)
94. Francois, D.; Pineau, A.; Zaoui, A.: Mechanical Behaviour of Materials. Vol 1: Elasticity and Plasticity. Kluwer Acad. Pub., Dordrecht (1998)
95. Frischmuth, F.; Kosiiiski, W.; Perzyna, P.: Remarks on mathematical theory of materials. Arch. Mech. 38, 1-2, 59-69 (1986)
96. Gambin, W.: Plasticity of crystals with interacting slip systems. Engn. Trans. 39, 3-4, 303-324(1991)
97. Gambin, W.: Crystal plasticity based on yield surfaces with rounded-off corners. Z. angew. Math. Mech. 71, 4, T265-T268 (1991)
98. Germain, P.; Nguyen, Q. S.; Suquet, P.: Continuum Thermodynamics. J. Appl. Mech. 50, 1010-1020(1983)
99. Giessen, E. v. d.: Continuum models of large deformation plasticity-Part I. Eur. J. Mech. A/Solids 8, 1, 15-34 (1989)
100. Giessen, E. v. d.: Micromechanical and thermodynamic aspects of the plastic spin. Int. J. Plasticity 7, 365-386 (1991)
101. Gilman, J. J.: Physical nature of plastic flow and fracture. In: Plasticity, Proc. 2nd Symp. on Naval Structural Mechanics. Eds.: E. H. Lee, P. S. Symonds, Pergamon Press, Oxford, 43-99 (1960)
102. Goldenblat, 1.1.: On a problem in the mechanics of finite deformation of continuous media (in Russian). C. R. Dokl. Acad. Sci. SSR 70, 6, 973-976 (1950)
103. Green, A. E.; Zerna, W.: Theoretical Elasticity. Oxford at the Clarendon Press (1954, 1968, 1975, 2002)
104. Green, A. E.; Adkins, J. E.: Large Elastic Deformations. Oxford Univ. Press, Oxford (1960), 2nd ed. (1970)
105. Green, A. E.; Naghdi, P. M.: A general theory of an elastic-plastic continuum. Arch. Rational Mech. Anal. 18, 4, 251-281 (1965)
106. Green, A. E.; Naghdi, P. M.; Trapp, J. A.: Thermodynamics of a continuum with internal constraints. Int. J. Engn. Sci. 8, 891-908 (1970)
107. Green, A. E.; Naghdi, P. M.: Some remarks on elastic-plastic deformation at finite strain. Int. J. Engn. Sci., 9, 1219-1229 (1971)
108. Greve, R.: Kontinuumsmechanik. Ein Grundkurs. Springer, Berlin (2003)
109. Gurtin, M. E.; Podio Guidugli, P.: The thermodynamics of constrained materials. Arch. Rat. Mech. Anal. 51, 3, 192-208 (1973)
110. Gurtin, M. E.: An Introduction to Continuum Mechanics. Academic Press, New York (1981)
111. Hackl, K.: Generalized standard media and variational principles in classical and finite strain elastoplasticity. J. Mech. Phys. Solids 45, 5, 667-688 (1997)
112. Halmos, P. R.: Finite-Dimensional Vector Spaces. Springer, New York (1974, 1987)
113. Halphen, M. B.; Nguyen, Q. S.: Sur les materiaux standards generalises. J. Meca. 14, 1, 39-63(1975)
114. Halphen, M. B.: Sur le champ des vitesses en thermoplasticite finie. Int. J. Solids Structures 11, 9, 947-960 (1975)
115. Han, W.; Reddy, B. D.: Plasticity-Mathematical Theory and Numerical Analysis. Springer, Berlin (1999)
116. Hanyga, A.; Ogden, R. W.: Mathematical Theory of Non-Linear Elasticity. Ellis Horwood Pub., Chichester (1985)
117. Haupt, P.: Viskoelastizitdt und Plastizitdt. Springer, Berlin (1977)
118. Haupt, P.: On the concept of an intermediate configuration and its application to a representation ofviscoelastic-plastic material behavior. Int. J. Plasticity 1, 303-316(1985)
119. Haupt, P.; Tsakmakis, C: On the application of dual variables in continuum mechanics. J. Continuum Mech. Thermodyn. 1, 165-196 (1989)
120. Haupt, P.: Continuum Mechanics and Theory of Materials. Springer, Berlin (2000), 2nd rev. ed. (2002)
121. Havner, K. S.: 4 discrete model for the prediction of subsequent yield surfaces in poly crystalline plasticity. Int. J. Solids Structures 7, 719-730 (1971)
122. Havner, K. S.: Comparisons of crystal hardening laws in multiple slip. Int. J. Plasticity 1, 111-124(1985)
123. Havner, K. S.: Finite Plastic Deformation of Crystalline Solids. Cambridge University Press (1992)
124. Hayes, M.; Saccomandi, G. (eds.): Topics in Finite Elasticity. CISM course 424. Springer, Wien (2001)
125. Hill, R.: A theory of the yielding and plastic flow of anisotropic metals. Proc. Roy. Soc. London A 193, 281-297 (1948)
126. Hill, R.: The Mathematical Theory of Plasticity. Clarendon Press, Oxford (1950, 1998)
127. Hill, R.: Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys. Solids 11, 357-372 (1963)
128. Hill, R.: Continuum micro-mechanics of elastoplastic polycrystals. J. Mech. Phys. Solids 13, 89-101 (1965)
129. Hill, R.: Generalized constitutive relations for incremental deformation of metal crystals by multislip. J. Mech. Phys. Solids 14, 2, 95-102 (1966)
130. Hill, R.: On constitutive inequalities for simple materials-1. J. Mech. Phys. Solids 16, 229-242 (1968)
131. Hill, R.: On constitutive macro-variables for heterogeneous solids at finite strain. Proc. R. Soc. Lond. A. 326, 131-147 (1972)
132. Hill, R.; Rice, J. R.: Constitutive analysis of elastic-plastic crystals at arbitrary strain. J. Mech. Phys. Solids 20, 401-413 (1972)
133. Hill, R.: Aspects of invariance in solid mechanics. In: Advances in Applied Mechanics. Ed.: C.-S. Yih, Academic Press 18, 1-75 (1978)
134. Hill, R.: On macroscopic effects of heterogeneity in elastoplastic media at finite strain. Math. Proc. Camb. Phil. Soc. 95, 481-494 (1984)
135. Hill, R.: Constitutive modelling of orthotropic plasticity in sheet metals. J. Mech. Phys. Solids 38, 3, 405-417 (1990)
136. Hill, R.: A user-friendly theory of orthotropic plasticity in sheet metals. Int. J. Mech. Sci. 35, 1, 19-25 (1993)
137. Hill, J. M.; Arrigo, D. J.: A note on Ericksen 's problem for radially symmetric deformations. Math. Mech. Solids 4, 395-405 (1999)
138. Holsapple, K. A.: On natural states and plastic strain in simple materials. Z. angew. Math. Mech. 53, 9-16 (1973)
139. Holzapfel, G. A.: Nonlinear Solid Mechanics. A Continuum Approach for Engineering. John Wiley & Sons, Chichester (2000)
140. Hosford, W. F.; Caddell, R. M.: Metal Forming-Mechanics and Metallurgy. Prentice-Hall, Englewood Cliffs (1983, 1993)
141. Hosford, W. F.: The Mechanics of Crystals and Textured Polycrystals. Oxford University Press, New York (1993)
142. Huber, M. T.: Wlasciwa praca odksztalcenia jako miara wytqzenia materyalu (The specific strain work as a measure of material effort). Czasopismo Techniczne 22, 81-83 (1904)
143. Huilgol, R. R.: On the structure of the group gi appearing in hyperelasticity. Int. J. Non-Linear Mechanics 6, 677-681 (1971)
144. Hutchinson, J. W.: Bounds and self consistent estimates for creep ofpolycrystalline materials. Proc. R. Soc. Lond. A. 348, 101-127 (1976)
145. Hutter, K.; Baaser, H. (eds.): Deformation and Failure in Metallic Materials. Springer, Berlin (2003)
146. Ignatieff, Y. A.: The Mathematical World of Walter Noll. A Scientific Biography. Springer, Berlin (1996)
147. Ikegami, K.: Experimental plasticity on the anisotropy of metals. In: CoUoques intemationaux du CNRS 295 Comportement mecanique de solides anisotropes. 201-242(1982)
148. Itskov, M.: On the application of the additive decomposition of generalized strain measures in large strain plasticity. Mech. Res. Comm. 31, 507-517 (2004)
149. Ivey, H. J.: Plastic stress-strain relations and yield surfaces for aluminium alloys. J. Mech. Engng. Sci. 3, 1, 15-31 (1961)
150. Kappus, R.: Zur Elastizitdtstheorie endlicher Verschiebungen. Z. angew. Math. Mech. 19, 5, 271-285, 19, 6, 344-361 (1939)
151. Kami, Z.; Reiner, M.: The general measure of deformation. In: Second-order Effects in Elasticity, Plasticity and Fluid Dynamics. Eds.: M. Reiner, D. Abir, Jerusalem Academic Press, Pergamon Press, Oxford, 217-227 (1964)
152. Kellogg, O. D.: Foundations of Potential Theory. F. Ungar Pub. Comp., New York (1929)
153. Kettunen, P. O.; Kuokkala, V.-T.: Plastic Deformation and Strain Hardening. Trans Tech Pub., Zurich (2003)
154. Khan, A. S.; Huang, S.: Continuum Theory of Plasticity. John Wiley & Sons, New York (1995)
155. Khan, A. S.; P. Cheng: An anisotropic elastic-plastic constitutive model for single andpolycrystalline metals. I-Theoretical Developments. Int. J. Plasticity 12, 2, 147-162(1996)
156. Knockaert, R.; Chastel, Y.; Massoni, E.: Rate-independent crystalline and polycrystalline plasticity, application to FCC materials. Int. J. Plasticity 16, 179-198 (2000)
157. Knops, R. J.; Payne, L. E.: Uniqueness Theorems in Linear Elasticity. Springer, Berlin (1971)
158. Knops, R. J.; Wilkes, E. W.: Theory of elastic stability. In: Handbuch der Physik. Vol. VIa/3. Ed.: S. Fliigge, Springer, Berlin (1973)
159. Kocks, U. F.; Tome, C. N.; Wenk, H.-R.: Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Material Properties. Cambridge Univ. Press (1998)
160. Kocks, U. F.; Mecking, H.: Physics and phenomenology of strain hardening: the FCC case. Progr. Mat. Sci. 48, 171-273 (2003)
161. Koiter, W. T.: Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface. Quart. Appl. Math. 11, 3, 350-354 (1953)
162. Kratochvil, J.; Dillon, O. W.: Thermodynamics of crystalline elastic-vis coplastic materials. J. Appl. Phys. 41, 4, 1470-1479 (1970)
163. Kratochvil, J.: Finite-strain theory of crystalline elastic-inelastic materials. J. Appl. Phys. 42, 3, 1104-1108 (1971)
164. Kratochvil, J.: On a finite strain theory of elastic-inelastic materials. Acta Mech. 16, 1-2, 127-142(1973)
165. Krausz, A. S.; Krausz, K. (eds.): Unified Constitutive Laws of Plastic Deformation. Acad. Press, San Diego (1996)
166. Krawietz, A.: Passivitdt, Konvexitdt und Normalitat bei elastisch-plastischem Material. Ingenieur-Archiv 51, 257-274 (1981)
167. Krawietz, A.: Materialtheorie. Springer, Berlin (1986)
168. Krawietz, A.; Mathiak, F.: Constitutive behavior of sheet metal-theoretical and experimental investigations. In: Proc. of COMPLAS II, Barcelona (1989)
169. Krempl, E.: A small-strain viscoplasticity theory based on over stress. In: Unified Constitutive Laws of Plastic Deformation. Eds.: A. S. Krausz, K. Krausz, Acad. Press, San Diego, 282-318 (1996)
170. Laine, E.; Vallee, C; Fortune, D.: Nonlinear isotropic constitutive laws: choice of the three invariants, convex potentials and constitutive inequalities. Int. J. Engn. Sci. 37, 1927-1941 (1999)
171. Lee, E. H.; Liu, D. T.: Finite-strain elastic-plastic theory with application to plane-wave analysis. J. Appl. Phys. 38, 1, 19-27 (1967)
172. Lee, E.: Elastic-plastic deformation at finite strains. J. Appl. Mech. 36, 1-6 (1969)
173. Lee, E. H., Germain, P. : Elastic-plastic theory at finite strain. In: Problems of Plasticity. Int. Symp., Warsaw 1972, Ed.: A. Sawczuk, Nordhoff, Leyden, 117-133 (1974)
174. Leigh, D. C: Nonlinear Continuum Mechanics. McGraw-Hill, New York (1968)
175. Lemaitre, J. (Ed.): Handbook of Materials Behavior Models. Vol. 1. Academic Press, San Diego (2001)
176. Liu, I-S.: Continuum Mechanics. Springer, Berlin (2002)
177. Liu, I-S.: On Euclidean objectivity and the principle of material frameindifference. J. Continuum Mech. Thermodyn. 16, 1-2, 177-183 (2004)
178. Liu, C; Huang, Y.; Stout, M. G.: On the asymmetric yield surface of plastically orthotropic materials: A phenomenological study. Acta Mater. 45, 6, 2397-2406 (1997)
179. Loomis, L. H.; Sternberg, S.: Advanced Calculus. Addison-Wesley, Reading (1968)
180. Lowe, T. C; Rolett, A. D.; Follansbee, P. S.; Daehn, G. S. (eds): Modeling the Deformation of Crystalline Solids. TMS, Warrendale (1991)
181. Lubarda, V. A.; Shih, C. F.: Plastic spin and related issues in phenomenological plasticity. J. Appl. Mech. 61, 524-529 (1994)
182. Lubarda, V. A.: Duality in constitutive formulation of finite-strain elastoplasticity based on F=Fg Fp and F=F F decompositions. Int. J. Plasticity 15, 1277-1290(1999)
183. Lubarda, V. A.: Elastoplasticity Theory. CRC Press, Boca Raton (2002)
184. Lubliner, J.: Plasticity Theory. Macmillan, New York (1990)
185. Liitkepohl, H.: Handbook of Matrices. John Wiley & Sons, Chichester (1996)
186. Lurie, A. L: Nonlinear Theory of Elasticity. North Holland, Amsterdam (1990) Macvean, D. B.: Die Elementararbeit in einem Kontinuum und die Zuordnung von Spannungs-und Verzerrungstensoren. Z. angew. Math. Phys. 19, 157-184 (1968)
187. Mandel, J.: Contribution theorique a Vetude de Vecrouissage et des his de Vecoulement plastique. In: Proc. 11th Int. Congr. Appl. Mech. Miinchen 1964, Ed.: H. Gortler, Springer, Berlin, 502-509 (1966)
188. Mandel, J.: Plasticite classique et viscoplasticite. CISM course No. 97, Springer, Wien(1971)
189. Mandel, J.: Equations constitutive et directeurs dans les milieux plastiques et viscoplastique. Int. J. Solids Structures 9, 6, 125-1A (1973)
190. Mandel, J.:. Thermodynamics and plasticity. In: Proc. Int. Symp. Foundations of Continuum Thermodynamics. Eds.: J. J. Delgado Domingos, M. N. R. Nina, J. H. Whitlaw, McMillan, London, 283-304 (1974)
191. Mandel, J.: Definition d'un repere privilegie pour Vetude des transformations anelastiques dupolycristal. J. Meca. Theor. Appl. 1, 1, 7-23 (1982)
192. Marris, A. W.; Shiau, J. F.: Universal deformations in isotropic incompressible hyperelastic materials when the deformation tensor has equal proper values. Arch. Rat. Mech. Anal. 36, 2, 135-160 (1970)
193. Marris, A. W.: Two new theorems on Ericksen 's problem. Arch. Rat. Mech. Anal. 79, 2, 131-173(1982).
194. Marsden, J. E.; Hughes, T. J. R.: Mathematical Foundations of Elasticity. Prentice-Hall, Englewood Cliffs (1983)
195. Maugin, G. A.: The Thermomechanics of Plasticity and Fracture. Cambridge Univ. Press, Cambridge (1992)
196. McConnell, A. J.: Applications of Tensor Analysis. Dover, New York (1957)
197. McLellan, A. G.: The Classical Thermodynamics ofDeformable Materials. Cambridge Univ. Press (1980)
198. Meric, L.; Poubanne, P.; Cailletaud, G.: Single crystal modeling for structural calculations: Part 1-Model presentation. J. Engrg. Mat. Techn. 113, 162-182 (1991)
199. Miehe, C: A constitutive frame of elastoplasticity at large strains based on the notion of aplastic metric. Int. J. Solids Structures 35, 30, 3859-3897 (1998)
200. Miehe, C; Schroder, J.; Schotte, J.: Computational homogenization analysis in finite plasticity-Simulation of texture development in polycrystalline materials. Comput. Methods Appl. Mech. Engrg. 171, 387-418 (1999)
201. Mielke, A.: Energetic formulation of multiplicative elasto-plasticity using dissipation distances. Continuum Mech. Thermodyn. 15, 351-382 (2003)
202. Mises, R. v.: Mechanik der fasten Korper im plastisch-deformablen Zustand. Nachr. Kgl. Ges. Wiss. Gottingen, Math. Phys. Klasse 582-592 (1913)
203. Mises, R. v.: Mechanik der plastischen Formdnderung von Kristallen. Z. angew. Math. Mech. 8, 3, 161-185 (1928)
204. Mooney, M.: A theory of large elastic deformation. J. Appl Phys., 11, 582-592 (1940)
205. Miiller, W. C: Universal solutions for simple thermodynamic bodies. Arch. Rational Mech. Anal. 35, 220-225 (1970)
206. Miiller, I.: Thermodynamics. Pitman, Boston (1985)
207. Miiller, I.; Strehlow, P.: Rubber and Rubber Balloons. Paradigms of Thermodynamics. Lecture Notes in Physics 637, Springer, Heidelberg (2004)
208. Murnaghan, F. D.: Finite deformations of an elastic solid. Amer. J. Math. 59, 235-260 (1937)
209. Naghdi, P.: Stress-strain relations in plasticity and thermoplasticity. In: Plasticity, Proc. 2nd Symp. on Naval Structural Mechanics. Eds.: E. H. Lee, P. S. Symonds, Pergamon Press, Oxford, 121-169 (1960)
210. Naghdi, P. M.; Trapp, J. A.: The significance of formulating plasticity theory with reference to loading surfaces in strain space. Int. J. Engn. Sci. 13, 785-797 (1975)
211. Naghdi, P.: A critical review of the state of finite plasticity. J. Appl. Math. Phys. 41, 315-394(1990)
212. Naghdi, P. M.; Srinivasa, A.: Some general results in the theory of crystallographic slip. Z. angew. Math. Phys. 45, 687-732 (1994)
213. Narasimhan, M. N. L.: Principles of Continuum Mechanics. John Wiley & Sons, New York (1993)
214. Nemat-Nasser, S.: Decomposition of strain measures and their rates in finite deformation elastoplasticity. Int. J. Solids Structures 15, 155-166 (1979)
215. Nemat-Nasser, S.; Hori, M.: Micromechanics: Overall Properties of Heterogeneous Materials. North-Holland, Amsterdam (1993)
216. Neumann, C: Zur Theorie der Elasticitdt. Borchardt's J. fiir reine and angewandte Math. 57, 281-318(1860)
217. Neutsch, W.: Koordinaten. Spektrum Akademischer Verlag, Heidelberg (1995)
218. Nguyen, H. V.; Raniecky, B.: Observable plastic spin and comparison with other approaches. Arch. Mech. 51, 2, 207-221 (1999)
219. Nguyen, Q. S.: Stability and Nonlinear Solid Mechanics. John Wiley & Sons Chichester (2000)
220. Noll, W.: On the continuity of the solid and fluid states. J. Rational Mech. Anal. 4, 3-81(1955)
221. Noll, W.: A mathematical theory of the mechanical behavior of continuous media. Arch. Rational Mech. Anal. 2, 197-226 (1958)
222. Noll, W.: Euclidean geometry and Minkowskian chronometry. Amer. Math. Monthly 71, 129-144(1964)
223. Noll, W.: Proof of the maximimality of the orthogonal group in the unimodular group. Arch. Rational Mech. Anal. 18, 100-102 (1965)
224. Noll, W.: A new mathematical theory of simple materials. Arch. Rational Mech. Anal. 48, 1-50(1972)
225. Noll, W.: The Foundations of Mechanics and Thermodynamics. Selected Papers. Springer, Berlin (1974)
226. Noll, W.: Finite-Dimensional Spaces. Algebra, Geometry, and Analysis. Martinus Nijhoff PubL, Dordrecht (1987)
227. Ogden, R. W.: Non-Linear Elastic Deformations. John Wiley & Sons, New York (1984a)
228. Ogden, R. W.: On Eulerian and Lagrangean objectivity in continuum mechanics. Arch. Mech. 36, 2, 207-218 (1984b)
229. Ogden, R. W.: Nonlinear elasticity, anisotropy, material stability and residual stresses in soft tissue. In: CISM Course 441 Biomechanics of Soft Tissue in Cardiovascular Systems. Eds.: G. A. Holzapfel, R. W. Ogden, Springer, Wien (2003)
230. Owen, D. R.: A mechanical theory of materials with elastic range. Arch. Rational Mech. Anal. 37, 85-110 (1970)
231. Pach, K.; Frey, T.: Vector and Tensor Analysis. Terra, Budapest (1964)
232. Penn, R. W.: Volume changes accompanying the extension of rubber. Trans Soc. Rheol. 14, 4, 509-517(1970)
233. Perzyna, P.; Kosinski, W.: A mathematical theory of materials. Bull. acad. Polonaise sci., Serie sci. techn. 21, 12, 647-654 (1973)
234. Petroski, H. J.; Carlson, D. E.: Controllable states of elastic heat conductors. Arch. Rational Mech. Anal. 31, 2, 127-150 (1968)
235. Petroski, H. J.; Carlson, D. E.: Some exact solutions to the equations of nonlinear thermoelasticty. J. Appl. Mech. 37, 1151-1154 (1970)
236. Petroski, H. J.: On the insufficiency of controllable states to characterize a class of rigid heat conductors. Z. angew. Math. Mech. 51, 481-482 (1971)
237. Petryk, H.: Macroscopic rate-variables in solids undergoing phase transformation. J. Mech. Phys. Solids 46, 5, 873-894 (1998)
238. Petryk, H.: On the micro-macro transition and hardening moduli in plasticity. In: Proc. lUTAM Symposium on Micro-and Macrostructural Aspects of Thermoplasticity. Bochum 1997, Eds.: O. T. Bruhns, E. Stein, Kluwer, Dordrecht 219-230 (1999)
239. Phillips, A.; Liu, C. S.; Justusson, J. W.: An experimental investigation of yield surfaces at elevated temperatures. Acta Mech. 14, 119-146 (1972)
240. Phillips, A.: The foundations of thermoplasticity-experiments and theory. In: Topics in Applied Continuum Mechanics. Eds.: J. L. Zeman, F. Ziegler, 1-21 (1974)
241. Podio-Guidugli, P.: A primer in elasticity. J. Elasticity 58, 1, 1-103 (2000). In book form: Kluwer Academic Publishers (2000)
242. Rajagopal, K. R., Srinivasa, A. R.: Mechanics of the inelastic behavior of materials-Part I Theoretical underpinnings. Int. J. Plasticity 14, 10-11, 945-968 (1998)
243. Reese, S.: On material and geometrical instabilities infinite elasticity and elastoplasticity. Arch. Mech. 52, 6, 969-999 (2000)
244. Reuss, A.: Vereinfachte Berechnung der plastischen Formdnderungsgeschwindigkeiten bei Voraussetzung der Schubspannungsfliefibedingung. Z. angew. Math. Mech. 13, 5, 356-360 (1930)
245. Rice, J. R.: Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity. J. Mech. Phys. Sol. 19, 433-455 (1971)
246. Richter, H.: Das isotrope Elastizitdtsgesetz. Z. angew. Math. Mech. 28, 7/8, 205-209 (1948)
247. Richter, H.: Zur Elastizitdtstheorie endlicher Verformungen. Math. Nachr. 8, 65-73 (1952)
248. Rivlin, R. S.: Material symmetry revisited. GAMM-Mitteilungen 1/2, 109-126 (2002)
249. Rosier, J.; Harders, H.; Baker, M.: Mechanisches Verhalten der Werkstoffe. B. G. Teubner, Stuttgart (2003)
250. Rubin, M. B.: Plasticity theory formulated in terms of physically based microstructural variables Part-I. Theory. Int. J. Solids Structures 31, 19, 2615-2634 (1994)
251. Rubin, M. B.: On the treatment of elastic deformation infinite elastic-viscoplastic theory. Int. J. Plasticity 12, 7, 951-965 (1996)
252. Saccomandi, G.: On inhomogeneous deformations infinite thermoelasticity. IMA J. Appl. Math. 63, 131-148 (1999)
253. Saccomandi, G.: Universal solutions and relations infinite elasticity. In: Topics in Finite Elasticity. Eds.: M. Hayes, G. Saccomandi, CISM course 424. Springer, Wien, 95-167 (2001)
254. Salenon, J.: Handbook of Continuum Mechanics. Springer, Berlin (2001)
255. Sansour, C: On the dual variable of the logarithmic strain tensor, the dual variable of the Cauchy stress tensor, and related issues. Int. J. Solids Structures 38, 9221-9232(2001)
256. Schade, H.: Tensoranalysis. Walter de Gruyter, Berlin (1997)
257. Schmid, E.: Streckgrenze von Kristallen. Schubspannungsgesetz. Proc. Int. Congr. Appl. Mech., Delft, 342 (1924)
258. Schmid, E.; Boas, W.: Kristallplastizitdt. Julius Springer, Berlin (1935)
259. Schmidt-Baldassari, M.: Numerical concepts for rate-independent single crystal plasticity. Comp. Methods Appl. Mech. Engrg. 192, 1261-1280 (2003)
260. Schroder, J.; Miehe, C: Aspects of computational rate-independent crystal plastiticty. Comp. Material Sci. 9, 168-176 (1997)
261. Schurig, M.; Bertram, A.: A rate independent approach to crystal plasticity with a power law. Comp. Material Sci. 26, 154-158 (2003)
262. Seth, B. R.: Generalized strain measure with applications to physical problems. In: Second-Order Effects in Elasticity, Plasticity and Fluid Dynamics. Eds.: M. Reiner, D. Abir, Pergamon Press, Oxford, 162-172 (1964).
263. Sidoroff, F.: The geometrical concept of intermediate configuration and elasticelastic finite strain. Arch. Mech. 25, 2, 299-308 (1973)
264. Silhavy, M.; Kratochvil, J.: A theory of inelastic behavior of materials. Part I. Ideal inelastic materials. Arch. Rational Mech. Anal. 65, 2, 97-129 (1977)
265. Part II. Inelastic materials. Arch. Rational Mech. Anal. 65, 2, 131-152 (1977)
266. Silhavy, M.: On transformation laws for plastic deformations of materials with elastic range. Arch. Rational Mech. Anal. 63, 2, 169-182 (1977)
267. Silhavy, M.: The Mechanics and Thermodynamics of Continuous Media. Springer, Berlin (1997)
268. Simo, J. C; Hughes, T. J. R.: Computational Inelasticity. Springer, New York (1998)
269. Simo, J. C: Numerical analysis and simulation of plasticity. In: Handbook of Numerical Analysis. Vol. VI. Eds.: P. G. Ciarlet, J. L. Lions, North-Holland (1998)
270. Skrzypek, J. J.: Plasticity and Creep. CRC Press, Boca Raton (1993)
271. Sluzalec, A.: Theory of Metal Forming Plasticity. Springer, Berlin (2004)
272. Smith, D. R.: An Introduction to Continuum Mechanics-after Truesdell and Noll. Kluwer, Dordrecht (1993)
273. Sokolnikoff, I. S.: Tensor Analysis. John Wiley & Sons, New York (1951, 1964)
274. Steinmann, P.: On localization analysis in multisurface hyperelasto-plasticity. J. Mech. Phys. Solids, 44, 10, 1691-1713 (1996)
275. Svendsen, B.: A thermodynamic formulation of finite deformation elastoplasticity with hardening based on the concept of material isomorpicism. Int. J. Plasticity 14, 6, 473-488(1998)
276. Svendsen, B.; Bertram, A.: On frame-indifference and form-invariance in constitutive theory. Acta Mech. 132, 195-207 (1999)
277. Svendsen, B.: On the modelling of anisotropic elastic and inelastic material behaviour at large deformation. Int. J. Solids Structures 38, 9579-9599 (2001)
278. Szczepinski, W.: Introduction to the Mechanics of Plastic Forming of Metals. Sijthoff & Noordhoff, Alphen aan den Rijn (1979)
279. Talbert, S. H.; Avitzur, B.: Elementary Mechanics of Plastic Flow in Metal Forming. John Wiley & Sons, Chichester (1996)
280. Taylor G. I.; Elam, C. F.: The plastic extension and fracture of aluminium crystals. Proc. Roy. Soc. A108, 28-51 1925
281. Taylor, G. I.: Plastic strain in metals. J. Inst. Metals 68, 307-324 (1938)
282. Teodosiu, C: A dynamic theory of dislocations and its applications to the theory of the elastic-plastic continuum. In: Fundamental Aspects of Dislocation Theory. Eds.: J. A. Simmons, R. de Wit, R. Bullough, Nat. Bur. Stand. (U. S.), Spec. Publ. 317, 11, 837-876(1970)
283. Teodosiu, C; Sidoroff, F. A theory of finite elastoviscoplasticity of single crystals. Int. J. Engn. Sci. 14, 165-176 (1976)
284. Teodosiu, C; Raphanel, J. L.; Sidoroff, F. (eds.): Large Plastic Deformations. A. A. Balkema, Rotterdam (1993)
285. Tresca, H.: Memoire sur Vecoulement des corps solides soumis a de fortes pressions. Comptes Rendus Acad. Sci. Paris 59, 754 (1864)
286. Trostel, R.: Mathematische Grundlagen the Technischen Mechanik I, Vektor-und Tensoralgebra. Vieweg, Braunschweig (1993)
287. Trostel, R.: Mathematische Grundlagen the Technischen Mechanik II, Vektorund Tensoranalysis. Vieweg, Braunschweig (1997)
288. Trostel, R.: Mathematische Grundlagen the Technischen Mechanik III, Materialmodelle in the Ingenieurmechanik. Vieweg, Braunschweig (1999)
289. Truesdell, C; Toupin, R. A.: The Classical Field Theories. Handbuch der Physik. Vol. III/l. Ed.: S. Fliigge, Springer, Berlin (1960)
290. Truesdell, C. A.: The nonlinear field theories in mechanics. In: Topics in Nonlinear Physics. Ed.: N. J. Zabusky, Springer, Berlin, 19-215 (1968)
291. Truesdell, C. A.: Rational Thermodynamics. McGraw-Hill, New York (1969)
292. Truesdell, C. A.; Noll, W.: The Non-linear Field Theories of Mechanics. In: Handbuch der Physik. Vol. III/3. Ed.: S. Flugge, Springer, Berlin (1965), 2nd ed. (1992), 3rd ed. by S. Antman (2004)
293. Valanis, K. C; Landel, R. F.: The strain-energy function of a hyperelastic material in terms of the extension ratios. J. Appl. Phys. 38, 7, 2997-3002 (1967)
294. Valent, T.: Boundary Value Problems of Finite Elasticity-Local Theorems on Existence, Uniqueness, and Analytic Dependence on Data. Springer, New York (1988)
295. Van Houtte, P.: Models for the prediction of deformation textures. In: Advances and Applications of Quantitative Texture Analysis. Eds.: H. J. Bunge, C. Esling, DGM Informationsgesellschaft-Verlag, Oberursel, 175-198 (1991)
296. Vianello, M.: The representation problem for constrained hyperelastic materials. Arch. Rational Mech. Anal. 111, 1, 87-98 (1990)
297. Vidoli, S.; Sciarra, G.: A model for crystal plasticity based on micro-slip descriptors. Continuum Mech. Thermodyn. 14, 425-435 (2002)
298. Wang, C.-C: On the stored-energy functions of hyperelastic materials. Arch. Rational Mech. Anal. 23, 1, 1-14 (1966)
299. Wang, C.-C: On the geometric structures of simple bodies, a mathematical foundation for the theory of continuous distributions of dislocations. Arch. Rational Mech. Anal. 27, 1, 33-94 (1967)
300. Wang, C. C; Truesdell, C. A.: Introduction to Rational Elasticity. Noordhoff, Leyden(1973)
301. Wang, C.-C; Bloom, F.: Material uniformity and inhomogeneity in anelastic bodies. Arch. Rational Mech. Anal. 53, 246-276 (1974)
302. Wang, C.-C: Global equations of motion for anelastic bodies and bodies with elastic range. Arch. Rational Mech. Anal. 59, 1, 9-23 (1975)
303. Wegener, K.: Zur Berechnung grofier plastischer Deformationen mit einem Stpffgesetz vom Uberspannungstyp. Braunschweig Series on echnics 2, TU Braunschweig(1991)
304. Wilmanski, K.: Thermomechanics ofContinua. Springer, Berlin (1998)
305. Xiao, H.; Bruhns, O. T.; Meyers, A.: A new aspect in kinematics of large deformations. In: Plasticity and Impact Problems. Ed.: N. K. Gupta, New Age, New Dehli, 100-109 (1996)
306. Xiao, H.; Bruhns, O. T.; Meyers, A.: Logarithmic strain, logarithmic spin and logarithmic rate. Acta Mech. 124, 89-105 (1997)
307. Xiao, H.; Bruhns, O. T.; Meyers, A.: The choice of objective rates infinite elastoplasticity: general results on the uniqueness of the logarithmic rate. Proc. R. Soc. Lond. A 456, 1865-1882 (2000)
308. Xiao, H.; Bruhns, O. T.; Meyers, A.: A consistent finite elastoplasticity theory combining additive and multiplicative decomposition of the stretching and the deformation gradient. Int. J. Plasticity 16, 2, 143-177 (2000)
309. Xiao, H.; Bruhns, O. T.; Meyers, A.: Basic issues concerning finite strain measures and isotropic stress-deformation relations. J. Elasticity 67, 1, 1-23 (2002)
310. Yang, W.; Lee, W. B.: Mesoplasticity and its Applications. Springer, Berlin (1993)
311. Yang, W. H. (ed.): Topics in Plasticity. A. M. Press, Ann Arbor (1991)
312. Yu, M.: Advances in strength theories for materials under complex stress state in the 20th Century. Appl. Mech. Rev. 55, 3, 169-218 (2002)
313. Zheng, Q.-S.; He, Q.-C; Curnier, A.: Simple shear decomposition of the deformation gradient. Acta Mech. 140, 131-147 (2000)
314. Ziegler, H.: An Introduction to Thermomechanics. North-Holland Pub., Amsterdam (1983)