Fracture mechanics: Inverse problems and solutions

Fracture Mechanics: Inverse Problems and Solutions

Volumn 139, Issue , 2006, Pages 1-382

  Bui, H D ^a,b  

^a ECOLE POLYTECHNIQUE   (France)

^b Research and Development Division   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84895259570     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-4020-4837-1     Document Type: Book

References (327)

1. Abe, H., Mura, T. and Keer, L. M. (1976). Growth of penny-shaped crack in hydraulic fracturing of rocks. J. Geophys. Res. 81(29), p. 5335.
2. Abou-Sayed, A., Brechtel, C. and Clifton, R. (1978). In-situ stress determination by hydrofracturing: a fracture mech approach. J. Geophys. Res. 83 (6) pp. 2851-2862.
3. Abeyaratne, R. and Hou, H. S. (1989). Growth of an infinitesimal cavity in a rate-dependent solid. Trans ASME, 56, pp. 40-46.
4. Achenbach, J. D. and Bazant, Z. P. (1972). Elastodynamic near-tip stress and displacement fields for rapidly propagating cracks in orthotropic materials. J. Appl. Mech. 97, p. 183.
5. Achenbach, J. D. and Bazant, Z. P. (1975). J. Appl. Mech., 42, p. 183.
6. Achenbach, J. D. (1980). Wave propagation in elastic solids. North-Holland, Amsterdam (1980).
7. Achenbach, J. D., Sotitopoulos, D. A. and Zhu, H. (1987). Characterisation of cracks from ultrasonic scattering data. J. Non Destructive Evaluation, 54, p. 754.
8. Adler, L. and Achenbach, J. D. (1980). Elastic wave diffraction by elliptical cracks. Theory and Experiments. J. Non Destructive Evaluation, 1, 87 (1980).
9. Afanasev, E. E. and Cherepanov, G. P. (1973). Some dynamic problem of the theory of elasticity. P. M. M., 37(4), pp. 618-639.
10. Aki, K. and Richards, P. G. (1980). Quantitative seismology, theory & methods. 1. W. H. Freeman and Cie. New York.
11. Alves, C. J. S. and Ha-Duong, T. (1999). On inverse scattering by screen. Inverse Problems 15, pp. 91-97.
12. Amestoy, M., Bui, H. D. and Dang Van, K. (1980). Analytic asymptotic solution of the kinked crack problem. In Advances in Fracture Research, D. Francois et al (Eds), pp. 107-113, Pergamon Press, Oxford, New York.
13. Andrieux, S. and Ben Abda, A. (1992). Identification de fissures planes par une donnée de bord unique: un procédé direct de localisation et d'identification. C. R. Acad. Sciences Paris, I (315), pp. 1323-1328.
14. Andrieux, S. and Ben Abda, A. (1996). Identification of planar cracks by complete overdetermined data inversion formulae. Inverse Problems, 12, pp. 553-563.
15. Andrieux, S., Bui, H. D. and Ben Abda, A. (1999). Reciprocity and crack identification. Inverse Problems, 15, pp. 59-65.
16. Audoly, B. (2000). Asymptotic study of the interface crack with friction. J. Mech. Phys. Solids, 10, pp. 1851-1864.
17. Bal, G. and Ryzhik, L. (1993). Time reversal and refocusing in random media. SIAM J. Appl. Math. 63, pp. 1475-1498.
18. Ball, J. M. (1982) Discontinuous equilibrium equations and cavitation in nonlinear elasticity. Phil. Trans. of Roy. Soc. London, A306, pp. 557-611.
19. Ballard, P. and Constantinescu, A. (1994). On the inversion of subsurface residual stresses from surface stress measurements. J. Mech. Phys. Solids, 42, pp. 1767-1788.
20. Bannour, T., Ben Abda, A. and Jaoua, M. (1997). A semi-explicit algorithm for the reconstruction of 3D planar cracks. Inverse Problems, 13, pp. 899-917.
21. Barenblatt, G. I. (1962). The mathematical theory of equilibrium cracks in brittel fracture. Advances in Appl. Mech. 7, pp. 55-129.
22. Bazant, Z. P. and Estenssoro, L. F. (1979). Surface singularity and crack propagation. Int. J. Solids & Struct., 15, pp. 405-426.
23. Bazant, Z. P. and Cedolin, L. (1991), Stability of structures: elastic, inelastic, fracture and damage theories. Oxford University Press, New York.
24. Ben Abda, A. and Bui, H. D. (2003). Planar cracks identification for the transient heat equation. Inverse and Ill-posed Problems, 11(1), pp. 67-86.
25. Beinert, J. and Kalthoff, J. F. (1981). Experimental determination of dynamic stress intensity factors by shadow patterns. Experimental evaluation of SIC and SIF, Mech. Fract. 7, (Ed G. C. Sih) 281.
26. Bergez, D. and Radenkovic, D. (1972). La caractérisation des fissures dans les plaques fléchies et coques. C. R. Acad. Sciences, Paris, 275, pp. 221-224.
27. Bellman, R. (1957). Dynamic programming. Princeton Univ. Press, N. J.
28. Bellman, R. (1971). Introduction to the mathematical theory of control process. Acad. Press, New York, London.
29. Benallal, A. Billardon, R. and Geymonat, G. (1989). C. R. Acad. Sci., 308, II, pp. 893-898.
30. Benallal, A. Billardon, R. and Geymonat, G. (1991). Bifurcation and localization in rate-independent materials. In Bifurcation and Stability of dissipative systems. 1-44, CISM Course 327, Springer-Verlag, Wien, New-York.
31. Benthem, J. P. (1976). Three-dimensional state of stress at the vertex of a quarter infinite crack in a half-space. Euromech colloqium 77, Paris.
32. Berry, J. P. (1960). Some kinetic considerations of the Griffith criterion for fracture I and II. J. Mech. Phys. Solids, 8(3), pp. 194-206.
33. Berthier, Y., Vincent, L. and Godet, M. (1988). Velocity accommodation in fretting. Wear, 139, pp. 77-92.
34. Berveiller, M. and Zaoui, A. (1979). An extension of the self-consistent scheme to plastically flowing polycrystals. J. Mech. Phys. Solids, 26, pp. 325-344.
35. Bergez, D. and Radenkovic, D. (1972). C. R. Acad. Sci. Paris, 275, pp. 221-224.
36. Bilby, B. A. and Cardew, G. E. (1975). The crack with a kinked tip. Int. J. Fract., 11, pp. 708-712.
37. Bilteryst, F. and Marigo, J. J. (2003). An energy based analyss of the pullout problem. European J. Mech. A/Solids, 22, pp. 55-69.
38. Biot, M. A. (1981) New variational irreversible thermodynamics of physical-chemical continua. Pergamon Press, Oxford.
39. Bittanti, S., Maier, G. and Nappi, A. (1984). Inverse problems in structural elasto-plasticity, a Kalman filter approach. In Plasticity today. Sawczuk and Bianchi G. (Eds.) Elsevier, p. 311.
40. Bojarski, N. N. (1981). Exact inverse scattering theory. Radio Sciences., 16, p. 1025.
41. Bojarski, N. N. (1983). Bistatic low frequency inverse scattering. J. Acoust. Soc. Am., 73, p. 733 (1983).
42. th Japan Nat. Symp. on BEM, Tokyo, Jascome Publications, Tokyo, p. 179.
43. Bonnet, M. (1999). Boundary Integral Equations Methods for Solids and Fluids, John Wiley and Sons.
44. Bossavit, A. and Fremond, M. (1976). The frontal method based on mechanics and dynamic programming. Comp. Meth. Appl. Mech. Eng., 8, p. 153.
45. Bossavit, A. (1988). The computation of Eddy-currents in deformable conductors. in Applied Electromagnetics in Materials. K. Miya (Ed.), pp. 211-224, Pergamon Press, Oxford.
46. Bourdin, B., Francfort, G. and Marigo, J. J. (2000). Numerical experiments in revisited brittle fracture. J. Mech. Phys. Solids, 48, pp. 797-826.
47. Bowie, O. L. (1973). Solutions of plane crack problems by mapping techniques. Mech. of Fracture, 1, Noordhoff.
48. rd Int. Conf. on Strength of metals.
49. Brun, L. (1969). Méthodes énergétiques dans les systèmes évolutifs linéaires; séparation des énergies. J. Méca., 8, p. 125.
50. Bryson, A. and Ho, Y. C. (1969). Applied optimal control. Blaisdell Publ. Waltham, Toronto, London.
51. Bueckner, Hans F. (1973). Field singularities and related integral representations. In Mechanics of fracture 1. Methods of analysis ans solutions of crack problems. G. C. Sih (Ed.) Noordhoff Int. Publ. Leyden.
52. Bui, H. D. (1964). The hardening of metals. C. R. Acad. Sciences, Paris, 259, pp. 4509-451.
53. Bui, H. D. (1964). The hardening of metals. C. R. Acad. Sciences, Paris, 262, pp. 401-404.
54. Bui, H. D. (1965). Dissipation of energy in plasticity. Cahier Groupe Fran-çais de Rhéologie, 1, p. 15.
55. Bui, H. D. (1969). Study of the subsequent yield surfaces in metal hardenning and behavior laws of cubic metals. PhD thesis, University of Paris.
56. Bui, H. D. and Dang Van, K. (1970). On the rate boundary value problem in elasto-plasticity. Int. J. Solids & Structures, 6, pp. 183-193.
57. Bui, H. D., Zaoui, A. and Zarka, J. (1972). On the elastic-plastic and viscoplastic behavior of face-centered cubic metallic monocrystals and polycrystals. In Foundations of Plasticity, A. Sawczuk (Ed.). Noordoff Int. Publ. Leyden, pp. 51-75 (in French).
58. Bui, H. D. (1974). Dual path-independent integrals in the boundary-value problems of cracks. Eng. Fracture Mech., 6, pp. 287-296.
59. Bui, H. D. (1975). Application des potentiels élastiques à l'étude des fissures de forme arbitraire en milieu tridimensionel. C. R. Acad. Sci. Paris, 280, p. 1157.
60. Bui, H. D. (1977). Stress and Crack displacement intensity factors in Elastodynamics. Proc. 4th Int. Conf. Fract., 3, Waterloo, p. 91.
61. Bui, H. D. (1977). An integral equations method for solving the problem of a plane crack of arbitrary shape. J. Mech. Phys. Solids, 23, pp. 29-39.
62. Bui, H. D. (1978). Brittle fracture mechanics. Masson, Paris.
63. Bui, H. D. and Dang Van, K. (1978). Some remarks about the formulation of three-dimensional thermo-elastoplastic problems by integral equations. Int. J. Solids & Structures, 14, pp. 935-939.
64. th French National Cong. on Mechanics, Nancy, pp. 318-319.
65. Bui, H. D. and Putot, C. (1979). Integral equations formulation of the 3D edge crack at a free surface, C. R. Acad. Sciences, Paris, 288, A, p. 311.
66. Bui, H. D. and Dang Van, K. (1979). Generalization of the Griffith theory of fracture to a three-dimensional solid. J. Mecanique Appliquee, 3(2), p. 205.
67. Bui, H. D., Ehrlacher, A. and Nguyen, Q. S. (1980). Crack propagation in coupled thermo-elasticity. J. Meca. 19, pp. 697, Gauthier-Villars, Paris.
68. Bui, H. D. and Ehrlacher, A. (1981) Propagation of damage in elastic and plastic solid. In Advances in Fracture Research. D. Francois et al (Eds). Pergamon Press, Oxford, and New York, p. 353.
69. Bui, H. D., Ehrlacher, A. and Nguyen, Q. S. (1981). Experimental study of dissipation in crack propagation by infra-red thermography. C. R. Acad. Sciences Paris, 293(II), pp. 1015-1018.
70. Bui, H. D. (1984). A path-independent integral for mixed modes of fracture in linear thermo-elasticity. IUTAM Symposium on Fundamental of Deformation and Fracture. Sheffield, pp. 597, April 1984.
71. Bui, H. D. and Proix, J. M. (1984). Lois de conservation en thermoélasticité linéaire. C. R. Acad. Sci. Paris, II (298), p. 325.
72. Bui, H. D. (1987). Recent developments in fracture mechanics. In Fracture of non-metallic materials. K. P. Hermann and L. H. Larsson (Eds.) ECSC, EEC, EAEC, pp. 21-32.
73. Bui, H. D. and Maigre, H. (1988). Extraction of stress intensity factors from global mechanical quantities. C. R. Acad. Sci. Paris, 306(II), p. 1213.
74. Bui, H. D. and de Langre, E. (1988). Separation of energies in dynamic fracture. In Theory and Applications, Computational Mechanics'88, 1, S. N. Atluri and G. Yagawa (Eds) pp. 9i1-9i4.
75. Bui, H. D. and Taheri, S. (1989). The weak "Thorn" singularity in a bimaterial junction in thermo-elasto-plasticity. C. R. Acad. Sciences, Paris, 309(II), pp. 1527-1533
76. Bui, H. D., Debruyne, G and Gao, Y. C. (1991) La singularité des champs en fond de fissure, Note HI.73/7270. Electricite de France.
77. Bui, H. D. (1992). On the variational boundary integral equations in elastodynamics with the use of conjugate functions. Journal of Elasticity, 28, p. 247
78. Bui, H. D., Maigre, H. and Rittel, D. (1992). A new approach to the experimental determination of the dynamic stress intensity factors. Int. J. Solids & Struct., 29, pp. 2881-2895.
79. Bui, H. D. (1994). Inverse Problems in the Mechanics of Materials: an introduction. CRC Press, Boca Raton. English translation from the French book, Eyrolles, Paris (1993).
80. Bui, H. D. (1996). Interaction between the Griffith crack and a fluid: theory of Rehbinder's effect. In Fracture: A topological encyclopedia of current knowledge, Chapter 6, G. P. Cherepanov (Ed.). Krieger, Melbourne.
81. Bui, H. D., Constantinescu, A. and Maigre, H. (1999). Inverse scattering of a planar crack in 3D acoustics: close form solution for a bounded solid. C. R. Acad. Sciences Paris, 327(II), pp. 971-976.
82. Bui, H. D. and Constantinescu, A. (2000). Spatial localization of the error of constitutive law for the identification of defects in elastic bodies. Arch. Mechanics, Warszawa, 52, pp. 511-522.
83. Bui, H. D., Dragon-Louiset, M. and Stolz, C. (2001). A thermodynamic analysis of wear. In Handbook of materials Behavior Models, J. Lemaitre (Ed.). Sect. 8.5, pp. 768-776. Academic Press.
84. Bui, H. D., Guyon, C. and Thomas, B. (2002). On viscous fluid flow near a moving crack, in Continuum Thermomechanics, G. A Maugin et al (Eds.) pp. 63, Kluwer Acad. Publ.
85. Bui, H. D., Constantinescu, A. and Maigre, H., (2004). Numerical identification of linear cracks in 2D elastodynamics using the instantaneous reciprocity gap. Inverse Problems, 20, pp. 993-1001.
86. Bui, H. D. and Oueslati, A. (2004). Exact solution of the problem of an interface crack between elastic and rigid bodies under frictional contact. C. R. Mecanique, 332, pp. 709-716.
87. Bui, H. D., Constantinescu, A. and Maigre, H., (2005). An exact inversion formula for determining a planar fault from boundary measurements. Inv. and Ill-posed Problems, 13, no6, pp. 553-565.
88. Bui, H. D., Constantinescu, A. and Maigre, H. (2005). The reciprocity gap functional for identifying defects and cracks. In Parameter identification of materials and structures. Z. Mroz and G. E. Stavroulakis (Eds.). CISM Course and Lecture, no 469, Springer, Wien, New York.
89. Bui, H. D. and Oueslati, A. (2005). The sliding interface crack with friction between elastic and rigid bodies. J. Mech. Phys. Solids, 53, pp. 1397-1421.
90. Bilteryst, F. and Marigo, J. J. (2003). An energy based analyss of the pullout problem. European J. Mech. A/Solids, 22, pp. 55-69.
91. Cailletaud, G. (1987). Une approche micromécanique phénoménologique du comportement inélastique des métaux. Ph. D. Thesis, Paris Univ.
92. Calderon, A. P. (1980). On an inverse boundary problem. In Seminar on numerical and applications to continuum physics (W. H. Meyer and M. A. Raupp, Eds.) Brazilian Math. Soc., R. de Janeiro, pp. 65-73.
93. Chen, F. H. K. and Shield, R. R., (1977), Z. A. M. P, 28, p. 1.
94. Cherepanov, G. P. (1968). Int. J. Solids & Struct., 4, p. 811.
95. Cherepanov, G. P. (1979). Mechanics of brittle fracture. McGraw Hill, New York.
96. Chi-Sing, M. and Lu, W. Y. (1987). Towards an acousto-elastic theory for measurement of residual stress. J. Elasticity, 17(2), p. 159.
97. Colton, D. and Monk, R. (1985). A novel method for solving the inverse problem for time harmonic acoustic waves in the resonance region. SIAM, J. Appl. Math, 45, p. 1039.
98. Comninou, M. (1977). The interface crack. J. Appl. Mech. 44, pp. 631-636
99. Constantinescu, A. (1995). On the identification of elastic moduli from displacement-force boundary measurements. Int. J. Inverse Prob. Engineering, I, pp. 293-315.
100. Constantinescu, A. and Tardieu, N. (2000). Identification strategies for recovering material parameters from indentation experiments. In Inverse Problems in Engineering, M. Tanaka and G. Dulikravich (Eds) ISIP'2000, Elsevier.
101. Constantinescu, A. and Verger, L. (2002). Identification of a viscoplastic material behavior under anisothermal conditions. In: Inverse problems and experiments design in thermal and mechanical engineering, D. Petit, D. B. Ingham, Y. Jarn, and F. Plourde (Eds). Eurotherm Seminar 68, pp. 221-228, Edizioni ETS.
102. Contensou, P. (1946). Note sur la cinématique du mobile dirigé. Bulletin ATMA, pp. 45.
103. Dang Dinh Ang, Gorenflo, R., Le Khoi, V. and Dang, D. T. (2000). Moment theory and some inverse problems in potential theory and heat conduction. Springer, Berlin.
104. Dang Van, K. and Maitournam, H. (1993). Steady-state flow in classical plasticity: application to repeated rolling and sliding contact. J. Mech. Phys. Solids. 41, pp. 1691-1710.
105. Dang Van, K. (1999). Fatigue analysis by the multiscale approach. High Cycle Metal Fatigue, From Theory to Applications, CISM Courses and Lectures, 392, K. Dang Van and I. V. Papadopoulos (Eds.), Springer, pp. 57-88.
106. Das, S. P. and Kostrov, B. V. (1990). Inversion for seismic slip rate and distribution with stabilizing constraints: Applications to the 1986 Andeanov Islands earthquake. J. Geophys. Res., 95, pp. 6899-6913.
107. Das, S. and Suhadolc, P. (1996). On the inverse problem for earthquake rupture: The Haskell-type source model. Journal of Geophysical Research, 101(B3), pp. 5725-5738.
108. Dautray, R. and Lions, J. L. (1989). Mathematical analysis and numerical methods for science and technology. 1, p. 2. Springer-Verlag, Berlin.
109. De Giorgi, E., Carriero, M. and Leaci, A. (1989). Existence theorem for a minimum problem with free discontinuity set. Arch. Rat. Mech. Anal. 108, pp. 195-218.
110. Deng, X. (1994). An asmptotic analysis of stationary and moving cracks with frictional contact along bimaterial and in homogeneous solids. Int. J. Solids & Struct., 31, pp. 2407-2429.
111. Deperrois, A. and Dang Van; K. (1990). Inclusion de surface et singularité épine. C. R. Acad. Sci. Paris (311, pp. 1285-1290.
112. Destuynder, Ph. and Djaoua, M. (1981). Sur une interprétation de l'intégrale de Rice en théorie de la rupture fragile. Math. Meth. in Appl. Sci., 3, p. 70.
113. Detournay, E. (1999). Fluid and solid singularities at the tip of a fluiddriven fracture. In D. Durban and Z. R. Pearson (Eds.). Non-linear singularities in deformation and flow, pp. 27-42, Dordrecht, Kluwer Acad.
114. Devaney, A. J. (1982). Inversion formula for inverse scattering within the Born approximation. Optics Letter, 7, p. 11.
115. Ding, Y. and Planchard, J. (1989). Une méthode pour le problème inverse des ondes acoustiques en régime harmonique diffractées par une surface rigide en 2D. Report EDF/DER/HI-70.6545, Clamart, p. 1.
116. Dong, P. and Pan, J. (1990). Plane-strain mixed-mode near-tip fields in elastic perfectly plastic solids under small-scale yielding conditions. Int. J. Fracture, 45, pp. 243-262.
117. Dragon-Louiset, M. and Stolz, C. (1999). Approche thermodynamique des phénomènes d'usure de contact. C. R. Acad. Sciences Paris, 327(II), pp. 1275-1280.
118. Dragon-Louiset, M., Bui, H. D. and Stolz, C. (2000). On Prandtl's lifting equation arising in wear mechanics, Archiv of Mechanics, Warsaw. 52, pp. 547-567.
119. Dragon-Louiset, M. (2001). On a predictive macroscopic contact-sliding wear model based on micromechanical considerations. Int. J. Solids & Structures, 38, pp. 1624-1639.
120. Dudukalenko, V. V. and Romalis, N. B. (1973). Izv. An. SSR. MTT, 8(2), pp. 129-136.
121. Dugdale, D. S. (1960). Yielding of steel sheets containng slits. J. Mech. Phys. Solids, 8, pp. 100-104.
122. Dundurs, J. (1969). Mathematical theory of dislocations. ASME, NY, pp. 70-115.
123. Dussan, E. B. and Davis, S. H. (1974). On the motion of a fluid-fluid interface along a solid surface. In J. Fluid Mech., 65, p. 71.
124. Duvaut, G. and Lions, J. L. (1972). Les inéquations en mécanique et en physique. Dunod, Paris. (English translation: Inequations in physics and mechanics, Spinger-Verlag, Berlin, 1979).
125. Eeckhout, M. V. (1976). The mechanics of strength reduction due to moisture in coal mine shales, Int. J. Rocks Mech. Min. Sci., Geomech. Abstract. 13, p. 61.
126. Ehrlacher, A. (1985). Contribution à l'étude de l'endommagement brutal. Thèse Doctorat d'Etat, Université Paris VI.
127. Ekeland, I. and Temam, R. (1974). Analyse convexe et problèmes variationels. Dunod, Paris.
128. Eshelby, J. D. (1951). The force on an elastic singularity. Phil. Trans. Roy. Soc. London, A 244, pp. 87-112.
129. Eshelby, J. D. (1957). The determination of the elastic field of an ellipsoidal inclusion and related problems. Proc. Roy. Soc. Lond. A241, pp. 376-396.
130. Feraille-Fresnet, A. and Ehrlacher, A. (2000). Behavior of a wet crack submitted to heating up to high temperature. Mech. Mater., 32, pp. 471-484.
131. Feraille-Fresnet, A., Bui, D. D. and Ehrlacher, A. (2003). Hydrostatic interaction of a wetting fluid and a circular crack in an elastic material. Mech. Mater., 35, pp. 581-586.
132. Finch, D. V. (1986). Uniqueness for the attenuated x-ray transform in the physical range. Inverse Problem, 2, pp. 197-203.
133. Finch, D. V. (2003). The attenuated X-ray transform: recent developments. Inverse problems, 47, pp. 47-66.
134. Fink, M. (1997). Time reversed acoustics. Physics Today, 20, pp. 34-40.
135. Fink, M. and Prada, C. (2001). Acoustic time-reversal mirrors. Inverse Problems, 17, pp. R1-38.
136. Fletcher, D. C. (1976). Conservation laws in linear Elastodynamics. Arch. Rat. Mech. Anal., 60, p. 329.
137. Focas, A. S. and Marinakis, V. (2003). Reconstruction algorithm for the brain imaging techniques of PET and SPECT, Hermis-μπ, 4, pp. 45-62.
138. François, D., Pineau, A. and Zaoui, A. (1991). Comportement mécanique des matériaux, I. Hermès, Paris.
139. Francfort, G. and Marigo, J. J. (1998). Revisiting brittle fracture as an energy minimization problem. J. Mech. Phys. Solids. 46, pp. 1319-1342.
140. Freund, L. B. (1972). Energy flux into the tip of an extending crack in an elastic solid. J. Elast., 2., p. 341.
141. Freund, L. B. (1972). Crack propagation in an elastic solid subjected to general loading. II. Non uniform rate of extension, J. Mech. Phys. Solids, 20, pp. 141-152.
142. Freund, L. B. (1973). Crack propagation in an elastic solid subjected to general loading. III. Stress wave loading, J. Mech. Phys. Solids, 21, pp. 47-61.
143. Freund, L. B. and Rice, J. R. (1974). On the determination of elastodynamic crack tip stress fields. Int. J. Solids & Struct., 10, p. 411.
144. Freund, L. B. (1990). Dynamic fracture mechanics. Cambridge Monographs on Mechanics and Applied Mathematics. Cambridge University Press. NY.
145. Friedman, A. and Vogelius, M. (1989). Determining cracks by boundary measurements. Indiana Univ. Math. J., 38.
146. Gao, Y. C. (1980). Elastic-plastic fields at the tip of a crack before growing. Acta Mechanica Solida Sinica, 1, p. 69 (in Chinese).
147. Gao, Y. C. and Bui, H. D. (1995). Damage field near a stationary crack tip. Int. J. Solids & Structures, 32(14), pp. 1979-1987.
148. Garash, D. and Detournay, E. (1999). Similarity solution of a semi-infinite fluid-driven fracture in a linear elastic solid. Private communication.
149. Germain, P. (1962). Mécanique des milieux continus, Masson, Paris.
150. Germain, P. (1978). Duality and Convection in cintinuum mechanics. In Trends in Applications to Mechanics. G. Fichera (Ed.) pp. 107-128. Pitman, London.
151. Germain, P. (1973). The method of virtual power in continuum mechanics. Part II. In Applications to continuum thermodynamics. J. J. D. Domingos et al (Eds.), pp. 317-333, J. Wiley, New York.
152. Gill, P. E. and Murray, W. (1974). Numerical methods for constraints optimization. Academic Press, New York
153. Green, A. K. and Pratt, R. L. (1974). Eng. Fract. Mech., 6, p. 71.
154. Griffith, A. A. (1920). The phenomena of rupture and flow in solids. Phil. Trans. Roy. Soc. London, 221, pp. 16-98.
155. Guelfand, L. M. and Chilov, G. E., 1962. Les distributions, Dunod, Paris.
156. Guiggiani, M., Krishnasamy, G., Rudolphi, T. J. and Rizzo, F. J. (1992). ASME, J. Appl. Mech., 59, pp. 604-614.
157. Gurson, A. L. (1977). Continuum theory of ductile fracture by void nucleation and growth: Part I-Yield critaria and flow rules for porous ductile media. ASME J of Engng. Materials and Technology, 99, pp. 2-15.
158. Gurtin, M. E. (1979). Int. J. Fracture, 15, pp. 169.
159. Ha-Duong, T. (1979). La méthode de Schenck pour la résolution de problèmes de radiation acoustique. Bulletin DER/EDF, C (2), pp. 15-50.
160. Halphen, B. and Nguyen, Q. S. (1975). Sur les matériaux standards généralisés. J. Méca., 14, p. 39.
161. Haskell, N. A. (1984). Radiation pattern of surface waves from point sources in a multi-layered medium. Bulletin of Seismological Soc. of America, 54, p. 377.
162. Hayes, M. and Rivlin, R. S. (1961). Arch. Rat. Mech. Anal., 8, p. 358.
163. Hill, R. (1950). The mathematical theory of plasticity. Clarendon Press. Oxford.
164. Hill, R. (1958). A general theory of uniqueness and stability in elastic/plastic solids. J. Mech. Phys. Solids, 6. pp. 236-249.
165. Hill, R. (1962). J. Mech. Phys. Solids, 10, pp. 1-16
166. Hill, R. (1967). The essential structures of constitutive laws of metals composites and polycrystals. J. Mech. Phys. Solids, 15, pp. 79-95.
167. de Hoop, A. T. and Stam, H. J. (1988). Time-domain reciprocity theorems for elastodynamic wave fields in solids with relaxation and their application to inverse problems. Wave Motion, 10, pp. 479-489.
168. Horgan, C. O. and Pence, T. J. (1989). Void nucleation in tensile deadloading of a composite imcompressible nonlinearly elastic sphere. J. Elasticity, 21, pp. 61-82.
169. Horgan, C. O. and Polignone, D. A. (1995). Cavitation in nonlinearly elastic solids: a review. ASME, Appl. Mech. Rev., 48, pp. 471-485.
170. Hsu, D. K., Rose, J. H. and Thompson, D. O. (1984). Reconstruction of inclusions in solids using ultrasonic Born inversion. J. Appl. Phys., 55, p. 162.
171. Hui, C. Y. and Riedel, H. (1981). The asymptotic stress and strain feld near the tip of a growing crack under creep conditions. Int. J. Fract., 17, p. 409.
172. th Int. Cong. Appl. Mech., 8, pp. 51-62.
173. Hutchinson, J. W. (1968). Singulat behavior at the end of a tensile crack in a hardening material. J. Mech. Phys. Solids, 16, pp. 13-31.
174. Hutchinson, J. W. (1973). Post-bifurcation behavior in the plastic range. J. Mech. Phys. Solids, 21, pp. 163-190.
175. Hutchinson, J. W. and Budiansky, B. (1974). Analytical and Numerical study of the effect of initial imperfections on the inelastic buckling of a cruciform column. IUTAM Symp. Buckling of Structures, pp. 98-105, Springer-Verlag, Cambridge.
176. Hudson, J. A. (1980). The excitation and propagation of elastic waves. Cambridge Univ. Press, Cambridge, NY.
177. Iooss, G. and Joseph, D. D. (1980). Elementary stability and bifurcation theory
178. Ishikawa, H., Kitagawa, H. and Okamura, H. (1979), Mechanical behavioir of materials, ICM 3, Cambridge, England, 3, p. 447.
179. Ikehata, M. (1998). Inversion for the linearized problem for an inverse boundary value problem in elastic prospection, SIAM J. Math. Anal., 50(6), p. 1635.
180. Kachanov, L. M. (1978). Crack growth under creep conditions. Ivz. An SSR Mekhanika Tverdogo Tela, 9(1), p. 57.
181. Kalthoff, J. F. (1985). On the measurement of dynamic fracture toughness: a review of recent works. Int. J. Fract., 27, p. 277.
182. Kassir, M. K. and Sih, G. C. (1960). Three-dimensional crack problems. Pergamon Press.
183. Kassir, M. K. and Bregman, A. M. (1972). J. Appl. Mech. 39, ASME 94 E, pp. 308-310.
184. Kawabe, H. (1994). The two dimensional inverse acoustic scattering for shape identification. In Inverse Problems in Eng. Mech. H. D. Bui and M. Tanaka (Eds.) pp. 33-39. Balkema/Rotterdam/Brookfield.
185. Kishimoto, K., Aoki, S. and Sakata, M. (1980). Dynamic stress intensity factor using J-integral and FE Methods. Eng. Fract. Mech., 13, p. 387.
186. Kitagawa, T. (1987). A deterministic approach to optimal regularization, the finite dimensional case. Japan J. Appl. Math., 4, p. 371
187. Klibanov, M. V. and Timonov, A. (2003). On the mathematical treatment of time reversal. Inverse Problems, 19, pp. 1299-1318.
188. Knowles, J. K. and Sternberg, E. (1972). Arch. Rat. Mech. Anal., 44, p. 187.
189. Kobayashi, A. S. (1978). Handbook on experimental Mech. Prentice Hall Inc., Englewood Cliffs.
190. Kohn, R. V. and Vogelius, M. (1985). Determining conductivity by boundary measurements. II. Interior results. Comm. Pure Appl. Math., 38, pp. 643-667.
191. Kohn, R. V. and Vogelius, M. (1987). Relaxation of a variational method for impedance computed tomography. Comm. Pure Appl. Math., 40, pp. 745-777.
192. Kolosov, G. V. (1909). On an application of complex function theory to a plane problem of the mathematical theory of elasticity. Yuriev.
193. Kostrov, B. V. (1975). On the crack propagation with variable velocity. Int. J. Fract., 11(1), pp. 47-56.
194. Krent, S. (1978). Int. J. Fracture. Vol 14, p. 123.
195. Kress, R. and Zinn, A. (1992). On the numerical solution of the three dimensional inverse obstacle scattering problem. J. Comp. Appl. Math., 42, pp. 49-61.
196. Kröner, E. (1961). Zur plastischen Verformung des Vielkristalls. Acta Metall., 9, pp. 155-161
197. Kunyansky, L. A. (2001). A new SPECT reconstruction algorithm based on the Novikov explicit inversion formula. Inverse problems, 17, pp. 293-306.
198. Kupradze, V. D. (1963). Dynamical problems in elasticity. Progress in Solid Mechanics. III, North Holland Publ.
199. Labourdette, R. and Baudin, G. (1981). An energy approach to three-dimensional fatigue crack growth problems. Report ONERA-TP-1981-16.
200. Ladevèze, P. (1975). Comparaison de modèles des milieux continus. Thèse Doctorat d'Etat, Univ. Paris 6.
201. Ladevèze, P. (1985). On the St-Venant principle in elasticity. In Local effects in the analysis of structures. Ladeveze P. (Ed.). Elsevier Sciences Publ., pp. 3-34.
202. Ladevèze, P. (1998). Nonlinear computational structural methods: new approaches and non incremental methods of calculation, Springer-Verlag, Berlin.
203. Landau, L. and Lifschitz, E. (1971). Mécanique des fluides. Ed. Mir, Moscou.
204. Langenberg, K. L. (1987). Applied inverse problems for acoustic, electromagnetic wave scattering. In Basic methods of tomography and inverse problems (Ed. P. C. Sabatier) Malvern Physics Series, Adam Hilger, Bristol, Philadelphia, p. 127.
205. Lattès, R. and Lions, J. L. (1967). Méthode de quasi-réversibilité. Dunod, Paris.
206. Laurentiev, M. M. (1967). Some improperly posed problems of mathematical physics. Springer-Verlag, Berlin, Heidelberg, New York.
207. Lazarus, V. (2003). Brittle fracture and fatigue propagation paths of 3D plane cracks under remote tensile loading. Int. J. Fracture, 112, pp. 23-46.
208. Leblond, J. B. (1986). C. R. Acad. Sci. Paris, II, 303, pp. 1521-1524.
209. Leblond, J. B. (2003). Mécanique de la rupture fragile et ductile. Hermès, Lavoisier, Paris.
210. Léger, A. and Potier-Ferry, M. (1988). Sur le flambage plastique. J. Méca. Théorique et Appliquée, 7, pp. 817-857.
211. Leguillon, D. and Sanchez-Palencia, E. (1987). Computation of singular solutions in elliptic problems and elasticity. Masson, Paris.
212. Lemaitre, J. and Chaboche, J. L. (1985). Mécanique des matériaux solides. Dunod, Paris.
213. Lesieur, M. (1997). Turbulence in Fluids. Kluwer Acad. Publ. Dordrecht/Boston/London.
214. Li, J. (1997). Detrmination of the full elastic-plastic stress field of a tensile crack by a minimization of the complementary energy. Int. J. Fracture. 84, pp. 1-17.
215. Li, J, Zhang, X. B. and Recho, N. (1999). Fracture criterion study of a ductile crack under tensile loading. J. Th. and Appl. Mech., 37(4), pp. 779-798.
216. Lions, J. L. (1971). Optimal control of systems governed by partal derivative equations. Springer-Verlag, Berlin, Heidelberg, New York.
217. Lorentz, E. and Andrieux, S. (2003). Analysis of non-local models through energetic formulations. Int. J. Solids & Structures, 40, pp. 2905-2936.
218. Maigre, H. (1990). Contribution théorique à l'identification des grandeurs caractéristiques en mécanique de la rupture dynamique. Thèse de Doctorat, Ecole Polytechnique.
219. Maitournam, H., Pommier, B. and Thomas, J. J (2002). Détermination de la réponse asymptotique d'une structure anélastique sous chargement thermomécanique cyclique, C. R. Mecanique, 330, pp. 703-708.
220. Mandel, J., Habib, P. and Bui, H. D. (1962). Traction and torsion tests on metallic tubes and strings. Proc. Brown Univ. Symposium, pp. 97-117.
221. Mandel, J. (1962). J. de Mécanique, 1, 1962, pp. 3-30.
222. Mandel, J. (1964). Contribution théorique à l'étude de l'écrouissage et des lois de l'écoulement plastique. Proc. of the 11th Int. Congress on Appl. Mech. Munich, pp. 502-509.
223. Mandel, J. (1965). Energie élastique et travail dissipé dans les modèles rhéologiques. Cahier Groupe Français de Rhéologie, 1, p. 1.
224. Mandel, J. (1966). Cours de Mécanique des milieux continus. I, II, Gauthier-Villars, Paris.
225. Mandel, J. (1971). Plasticité classique et viscoplasticité. Cours CISM Springer-Verlag.
226. Mandel, J. (1978). Dissipativité normale et variables cachées. Mech. Res. Comm., 5, p. 225.
227. Maouche, N., Maitournam, H. and Dang Van, K (1997). On a new method of evaluation of the inelastic state due to moving contact. Wear, 203-204, pp. 139-147.
228. Marigo, J. J. (1989). Constitutive relation in plasticity, damage and fracture based on a work property. Nuclear Eng. Design, 114, p. 249.
229. Maugin, G. A. (1992). The thermomechanics of plasticity and fracture. Cambridge Univ. Press., Cambridge, New York, Melbourne, Sidney.
230. Maugis, D. and Barquins, M. (1980). Fracture mechanics and adherence of viscoelastic solids. in Adhesion and adsorption of polymers. Part A, L. H. Lee (Ed.), pp. 203-277.
231. Menikhes, L. D. and Tanana, V. P. (1998). On convergence of applications in the regularization method and the Tikhonov regularization method of the n-th order. Inv. and Ill-posed Problems, 6, pp. 243-262.
232. Meyer, G. (1996). La radioactivité à l'ouvrage. Clefs CEA, 34, pp. 46-50.
233. Michalske, T. and Bunker, B. (1988). La fracture du verre. In Pour la Science, pp. 52-59.
234. Miles, J. P. (1971). Bifurcation in plastic flow under uniaxial tension.
235. Moffatt, H. K. (1964). Viscous and resistive eddies near a sharp corner. J. Fluid Mech., 18, pp. 1-18.
236. Moussy, F. (1985). in Plastic Instability, Considère Symposium, Presses ENPC, Paris, pp. 263-272.
237. Muskhelishvili, N. I. (1977). Some basic problems of the mathematical problems of elasticity. Noordhoff Int. Publ. Leyden.
238. Nakada, Y. (1965). Heat measurements in crystals. Phil. Mag., 11, p. 10
239. Nakamura, G. and Uhlmann, G. (1995). Inverse problem at the boundary of an elastic medium, SIAM J. Math. Anal., 26, 2, pp. 263-279.
240. Natterer, F. (2001). Inversion of the attenuated Radon transform. Inverse Problems, 17, pp. 113-119.
241. Nedelec, J. C. (1982). Integral equations wwith non integrable kernels. In Integral equations and operator theory, 5, pp. 562-572.
242. Nemat-Nasser, S., Sumi, Y. and Keer, L. M. (1980). Unstable growth of tensile crack in brittle solids. Int. J. Solids & Struct., 16, p. 1017.
243. Nemat-Nasser, S. and Hori, M. (1999). Micromechanics: Overall properties of heteegeneous materials. North-Holland, Amsterdam.
244. Nilsson, F. (1973). A path-independent integral for transient crack problems. Int. J. Solids & Struct., 9, p. 1107.
245. Nguyen, K., Mai, Faye, C., Eglin, L. L. and Truong, T. T. (2001). Apparent image formation by Compton scattered photons in gamma ray imaging. IEEE Signal Process. Letters, 8, p. 248.
246. Nguyen, K., Mai and Truong, T. T. (2002). On an integral transform and its inverse in nuclear imaging. Inverse Problems, 18, p. 265.
247. Nguyen, K., Mai and Truong, T. T. (2002). Exact inversion of a compound conical Radon transform and a novel nuclear imaging principle. C. R. Acad. Sci. Paris, 335(I), p. 213.
248. Nguyen, K., Mai, Truong, T. T., Bui, H. D. and Delarbre, J. L. (2004). A novel inverse problem in gamma-rays emission imaging. Inverse Problems in Sciences and Engineering, 12(2), pp. 225-246.
249. Nguyen, Q. S and Bui, H. D. (1974) Sur les matéraux à écrouissage positif ou négatif. J. Mecanique, 13(2), pp. 321-342.
250. Nguyen, Q. S (1977). On the elastic-plastic initial-boundary value problem and its numerical integration. Int. J. Num. Meth. Engng., 11, pp. 817-832.
251. Nguyen, Q. S. (1981). A thermodynamic description of the running crack. IUTAM Symp. on 3D constitutive equations and ductile fracture, Dourdan, North-Holland, p. 315.
252. Nguyen, Q. S, Stolz, C and Debruyne, G. (1990). Energy method in fracture mechanics: stability, bifurcation and second variations. Eur. J. Mech. A/Solids, 2, p. 157.
253. Nguyen, G. (1992). Validation d'Ultson 2/Comparaison Calculs-Mesures. Technical Notes No HI-72/805, Electricite de France.
254. Nguyen, Q. S. (2000). Stability and non linear solid mechanics. Wiley & Son, London.
255. Noether, E. (1918). Invariant variationsprobleme. Gott. Nach. Math. Phys., 2, p. 235.
256. Novikov, R. G. (2001). An inversion formula for the attenuated x-ray transformation. Ark. Math. 40, pp. 147-167. (Rapport de Recherche 00/05-3. Université de Nantes. Laboratoire de Mathématiques).
257. Novikov, R. G. (2001). Une formule d'inversion pour la transformation d'un rayonnement X atténué. C. R. Acad. Sci. Paris, 332(I), p. 1059.
258. Otsuka, K. (1981). Generalized J-integral and 3D fracture mechanics. Hiroshima Math. J., 11, p. 25.
259. Pecastaings, F. (1985). On a method to evaluate edge effects in elastic plates. In Local effects in the analysis of structures. Ladeveze P. (Ed.). Elsevier Sciences Publ., pp. 101-126.
260. Petryk, H. (1985). On energy criteria of plastic instability. In Plastic instability. Proc. Considère Memorial, ENPC Paris, pp. 215-226.
261. Pham, T. L. (1967). Potentiels elastiques, tenseurs de Green et de Neumann. J. Meca., 6(2), p. 211.
262. Pineau, A. (1981). In Advances in Fracture Mechanics, D. Francois et al (Eds.), Pergamon Press, 2, p. 635.
263. Pineau, A. (1992). Global and local approaches of fracture. Transferability of laboratory test results to components. In Topics in Fracture and Fatigue, Argon A. S (Ed.) Springer-Verlag, New-York, Berlin, Heidelberg, London, Paris.
264. Pinna, Ch. and Doquet, V. (1999). The preferred fatigue crack propagation mode in a M250 maraging steel loaded in shear. Fatigue Fract. Eng. Mater. Struct., 23, pp. 173-183.
265. Pontryagin, L. (1959). Optimal control of processes. (In Russian), Uspekhi Math Nauk, 14(1), pp. 3-20.
266. Pontryagin, L., Boltiansky, V. G., Gamkrilidze, R. V. and Mischenko, E. F. (1962). The mathematical theory of optimal processes. Interscience Publ. Wiley, New-York.
267. Prada, C. and Fink, M. (1994). Eigenmodes of the time reversal operator: a solution to selective focusing in multiple target media. Wave Motion, 20, pp. 151-163.
268. Ravi-Chandar, K. and Knauss, W. G. (1984). An experimental investigation into dynamic fracture: I. Crack initiation and arrest. Int. J. Fract., 25, 247-263.
269. Rvatchev, V. L. (1957). On the pressure of a wedge shaped punch on an elastic half space. Prikl. Math. Mekh., 23.
270. nd Int. Cong. Surf., Act., 3, p. 563.
271. Rice, J. R. (1968). Mathematical analysis in the Mechanics of Fracture; in Fracture, H. Liebowitz (Ed.), p. 191, Acad. Press.
272. Rice, J. R. and Rosengren, G. F. (1968). Plane strain deformation near a crack tip in a power law hardening material. J. Mech. Phys. Solids, 16, p. 1.
273. Rice, J. R. and Tracey, D. M. (1969). On ductile enlargement of voids in triaxial stress states. J. Mech. Phys. Solids, 17, p. 201.
274. Rittel, D, Maigre, M. and Bui, H. D. (1992). A new method for dynamic fracture toughhness testing. Scripta Metallurgica et Materiala, 26, p. 1593.
275. Rousselier, G. (1981). Finite deformation constitutive relations including ductile fracture damage. In Three-dimensional constitutive relations and ductile fracture. Nemat-Nasser S. (Ed.). North-Holland, Amsterdam, p. 331.
276. Rousselier, G. and Leclercq, S. (2005). A simplified " polycrystalline" model for viscoplastic and damage finite elements analyses. Int. J. Plasticity (in press).
277. Rudnicky, J. and Rice, J. R. (1980). Int. J. Solids & Struct., 16. pp. 597-605.
278. Sabatier, P. C. (1987). Basic methods of tomography and inverse problems. Malvern Phys. Ser. Adam Hilger, Bristol, Philadelphia.
279. Saka, M., Abe, K. and Tanaka, M. (1986). Computational Mechanics, 1, pp. 11-19.
280. Salençon, J. (1977). Applications of the theory of plasticity in soil mechanics. Wiley and Sons, Chischester, New York, Brisbane, Toronto.
281. Santacreu, P. O. (1994). Sur la singularité épine engendrée par une discontinuité plastique. C. R. Acad. Sciences Paris, 318(II), pp. 1577-1582.
282. Savitski, A. and Detournay, E. (2001). Similarity solution of a pennyshaped fluid-driven fracture in a zero toughness linear elastic-solid. C. R. Acad. Sci. Paris, IIb (329), pp. 255-262.
283. Schwartz, L. 1978. Théorie des distributions, Hermann, Paris.
284. Sedov, A. and Schmerr, J. L. W. (1986). The time domain elasto-dynamic Kirchhoff approximation for cracks: the inverse problems. Waves Motion, 8, p. 15.
285. Sharma, S. M. and Aravas, N. (1991). Determination of higher order terms in asymptotic elastoplastic crack tip solution. J. Mech. Phys. Solids, 39, pp. 1043-1072.
286. Shih, C. F. (1974). Small-scale yielding analysis of mixed mode planestrain crack problem. In Fracture analysis. ASTM STP 560.
287. Shockley, D. A., Kalthoff, J. F., Klemm, W. and Winkler, S. (1983). Simultaneous measurement of stress intensity and toughness for fast-running cracks in steel. Experimental Mechanics, 23, pp. 140-145.
288. Sidoroff, F. (1976). Variables internes en visco-élasticité et visco-plasticité. Thèse Doct. D'Etat, Univ. Paris VI.
289. Sih, G. C. and Rice, J. R. (1964). J. Appl. Mech., 31. ASME, 86 E, p. 477.
290. Sih, G. C. (1973). Handbook of stress intensity factors. Lehigh University.
291. Silling, A. (1988). Numerical study of lost of ellipticity near singularities in elastic material. J. Elasticity, 19, p. 213.
292. Sneddon, I. N. (1969). Transform solutions of crack problems in the theory of elasticity. Z. A. M. M, 49, p. 15.
293. Solomon, L. and Zamfirescu, I. (1965). Some approximate formulae and solutions in the contact problem for punches with aplane bounded non-elliptical basis. In Applications Th. of functions in continuum mechanics. 1.
294. Stolz, C. (1987). Anélasticité et stabilité. Ph. D Thesis, Paris Univ.
295. Stolz, C. (1991). Sur les équations générales de la dynamique des milieux continus anélastiques. C. R. Acad. Sciences Paris, II, p. 307.
296. Stolz, C. (2004). Energy methods in non-linear mechanics. AMAS, Lecture Notes 11, IPPT, Warsaw.
297. Stupkiewicz, S. and Mroz Z. (1999). A model of third body abrasive friction and wear in hot metal forming. Wear, 231, pp. 124-138.
298. Suo, X. Z. and Combescure, A. (1989). Sur une formulation mathématique de la dérivée seconde de l'énergie potentielle en théorie de la rupture fragile. C. R. Acad. Sciences Paris, 308(II), p. 1119.
299. Suo, X. Z. and Combescure, A. (1992). Eur. J. Mech. A/Solids, 11 (5) pp. 609-624.
300. Suquet, P. (1982). Plasticité et homogénéisation. Ph. D Thesis. University P. & M. Curie, Paris.
301. Tarantola, A. (1987). Inverse problem theory. Elsevier, England.
302. II components of the SIF, studied by caustics. J. Phys. D: Appl. Phys., 17, pp. 2339-2349.
303. Thompson, R. D. and Hancock J. M. (1984). Int. J. Fracture, 24, pp. 209-228.
304. Tikhonov, A. and Arsenine, V. (1977). Méthode de résolution de problèmes mal posés. Editions Mir, Moscou.
305. Tonti, E. (1975). On the formal structure of physical theories. Cooperative Library Instituto di Polytechnico di Milano, Milano.
306. Triantafyllidis, N. (1983). On the bifurcation and post-bifurcation analysis of elastic-plastic solids under general prebifurcation conditions. J. Mech. Phys. Solids, 31, pp. 499-510.
307. Truong, T. T., Mai K., Nguyen, Bui H. D., and Daveau, C. (2002). Determination of the electronic density in a medium by an inverse method based on double-Compton scattering in transmission imaging. Inverse Problems in Engineering: Theory and Practice, II, H. R. B. Orlande (Ed.) (E-paper), pp. 304-412.
308. Tvergaard, V. and Needleman, A. (1975). On the buckling of elasticplastic columns with asymmetric cross-sections. Int. J. Mech. Sci., 17, pp. 419-424.
309. Vallée, M. (2003). Etude cinématique de la rupture sismique en champ lointain: méthodes et résolution. Thèse Doctorat, Université de Grenoble.
310. Van Dam, C. J., De Pater, C. J. and Romijn, R. (1999). Reopening of dynamic fractures in laboratory experiments. In Cong. Int. Mecanique des roches, Paris, August, 1999, II, pp. 792-994.
311. Vutukuri, V. S. (1974). The effect of liquids on the tensile strength of limestone. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 11, pp. 27-29.
312. Wadier, Y. (1994). Contraintes résiduelles et mécanique de la rupture. Eléments d'analyse. Note HI-74-93-089, Electricité de France.
313. Waeckel, F., Dupas, Ph. and Genette, P. (1998) Parcourir l'histoire d'un composant ou la détermination des contraintes résiduelles de soudage. Epure, DER/Electricité de France, N° 60, Octobre 1998, pp. 97-104.
314. Weaver, J. (1977). Three-dimensional crack analysis. Int. J. Solids & Struct., 13(4), pp. 321-330.
315. Weichert, R. and Schönert, K. (1974). On the temperature rise at the tip of a fast running crack. J. Mech. Phys. Solids, 22, p. 127.
316. Williams, M. L. (1957). On the stress distribution at the base of a staionary crack. J. Appl. Mech., 24, pp. 111-114.
317. Willis, J. R. (1965). Dislocations and inclusions, J. Mech. Phys. Solids, 13, p. 377.
318. Willis, J. R. (1967). J. Mech. Phys. Solids, 15(3), p. 151.
319. Willis, J. R. (1991). On methods for bounding the overall properties of nonlinear composites. J. Mech. Phys. Solids, 39, pp. 73-86.
320. Wilson, W. K. and Yu, I. W. (1979). Int. J. Fracture, 15(4), p. 377.
321. Wu, C. H. (1978). J. Appl. Mech., 45, pp. 553-558.
322. Yao, Z. and Gong, B. (1994). Defect identification using boundary element method. In Inverse problems in engineering mechanics. H. D. Bui, et al (Eds.), pp. 387-392.
323. Yoffe, E. H. (1951). The moving Griffith crack. Phil. Mag., 42, p. 739.
324. Zazovskii, A. F. (1979). Growth of coin-shaped crack produced by hydraulic fracture in an impermeable rock. Izv, An SSSR. Mekhanika Tverdogo Tela, 14(2), pp. 103-109.
325. Zener, C. and Rosakis, A. J. (1989). Dynamic fracture initiation and propagation in 4340 steel under impact loading. Int. J. Fracture, p. 30.
326. Zhong, W. X. (1995). A new systematic methodology in elasticity theory. Dalian Science & Technology University Press.
327. Zwiers, R. I., Ting, T. C. T. and Spilker, R. L. (1982). On the log singularities. J. Appl. Mech., 49, p. 561