Sustainable, heat-resistant and flame-retardant cellulose-based composite separator for high-performance lithium ion battery

Scientific Reports

Volumn 4, Issue , 2014, Pages

  Zhang, Jianjun ^a   Yue, Liping ^a,c   Kong, Qingshan ^a   Liu, Zhihong ^a   Zhou, Xinhong ^c   Zhang, Chuanjian ^a   Xu, Quan ^a   Zhang, Bo ^a   Ding, Guoliang ^a   Qin, Bingsheng ^a   Duan, Yulong ^a   Wang, Qingfu ^a   Yao, Jianhua ^a   Cui, Guanglei ^a   Chen, Liquan ^b  

^a QINGDAO INSTITUTE OF BIOENERGY AND BIOPROCESS TECHNOLOGY   (China)

^b INSTITUTE OF PHYSICS   (China)

^c QINGDAO UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84893834998     PISSN: None     EISSN: 20452322     Source Type: Journal    
DOI: 10.1038/srep03935     Document Type: Article

References (60)

1. Arora, P. & Zhang, Z. M. Battery separators. Chem. Rev. 104, 4419-4462 (2004)
2. Koo, B. et al. A highly cross-linked polymeric binder for high-performance silicon negative electrodes in lithium ion batteries. Angew. Chem. Int. Ed. 51, 8762-8767 (2012)
3. Li, H.,Wang, Z., Chen, L. & Huang, X. Research on advanced materials for Li-ion batteries. Adv. Mater. 21, 4593-4607 (2009)
4. Cui, G. L. et al. A germanium-carbon nanocomposite material for lithium batteries. Adv. Mater. 20, 3079-3083 (2008)
5. Zhou, X. H. et al. A core-shell structured polysulfonamide-based composite nonwoven towards high power lithium ion battery separator. J. Electrochem. Soc. 160, A1341-A1347 (2013)
6. Cui, G. L. et al. A novel germanium/carbon nanotubes nanocomposite for lithium storage material. Electrochim. Acta 55, 985-988 (2010)
7. Palacin, M. R. Recent advances in rechargeable battery materials: a chemist's perspective. Chem. Soc. Rev. 38, 2565-2575 (2009)
8. Scrosati, B. & Garche, J. Lithium batteries: Status, prospects and future. J. Power Sources 195, 2419-2430 (2010)
9. Hu, Y. S. et al. Superior storage performance of a Si@SiOx/C nanocomposite as anode material for lithium-ion batteries. Angew. Chem. Int. Ed. 47, 1645-1649 (2008)
10. Zhao, L., Hu, Y. S., Li,H., Wang, Z. X. & Chen, L. Q. Porous Li4Ti5O12 coated with N-Doped carbon from ionic liquids for Li-ion batteries. Adv. Mater. 23, 1385-1388 (2011)
11. Maier, J. Thermodynamics of electrochemical lithium storage. Angew. Chem. Int. Ed. 52, 4998-5026 (2013)
12. Suo, L. M., Hu, Y. S., Li, H., Armand, M. & Chen, L. Q. A new class of solvent-insalt electrolyte for high-energy rechargeable metallic lithium batteries. Nat. Commun. 4, 1481 (2013)
13. Ding, N. et al. Improvement of cyclability of Si as anode for Li-ion batteries. J. Power Sources 192, 644-651 (2009)
14. Li, H.,Wang, Z. X., Chen, L. Q. &Huang, X. J. Research on advanced materials for Li-ion batteries. Adv. Mater. 21, 4593-4607 (2009)
15. Huang, X. S. Separator technologies for lithium-ion batteries. J. Solid State Electrochem. 15, 649-662 (2011)
16. Zhang, J. J. et al. A highly safe and inflame retarding aramid lithium ion battery separator by a papermaking process. Solid State Ionics 245-246, 49-55 (2013)
17. Kim, M., Shon, J. Y., Nho, Y. C., Lee, T. W. & Park, J. H. Positive Effects of E-Beam Irradiation in Inorganic Particle Based Separators for Lithium-Ion Battery. J. Electrochem. Soc. 157, A31-A34 (2010)
18. Ryou, M. H., Lee, Y. M., Park, J. K. & Choi, J. W. Mussel-inspired polydopaminetreated polyethylene separators for high-power Li-Ion batteries. Adv. Mater. 23, 3066-3070 (2011)
19. Zhang, S. S. A review on the separators of liquid electrolyte Li-ion batteries. J. Power Sources 164, 351-364 (2007) (Pubitemid 44959683)
20. Lee, H., Alcoutlabi, M., Watson, J. V. & Zhang, X. W. Electrospun nanofibercoated separator membranes for lithium-ion rechargeable batteries. J. Appl. Polym. Sci. 129, 1939-1951 (2013)
21. Jeong, H. S., Kim, J. H. & Lee, S. Y. A novel poly(vinylidene fluoridehexafluoropropylene)/ poly(ethylene terephthalate) composite nonwoven separator with phase inversion-controlled microporous structure for a lithiumion battery. J. Mater. Chem. 20, 9180-9186 (2010)
22. Etacheri, V., Marom, R., Elazari, R., Salitra, G. & Aurbach, D. Challenges in the development of advanced Li-ion batteries: a review. Energy Environ. Sci. 4, 3243-3262 (2011)
23. Zhou, L. et al. Facile in-situ synthesis of manganese dioxide nanosheets on cellulose fibers and their application in oxidative decomposition of formaldehyde. J. Phys. Chem. C 115, 16873-16878 (2011)
24. Wang, Z. H., Chien, W. C., Yue, T. W. & Tang, S. C. Application of heparinized cellulose affinity membranes in recombinant adeno-associated virus serotype 2 binding and delivery. J. Membrane Sci. 310, 141-148 (2008)
25. Jackson, E. L. & Hudson, C. S. Application of the cleavage type of oxidation by periodic acid to starch and cellulose. J. Am. Chem. Soc. 59, 2049-2050 (1937)
26. Cherian, B. M. et al. Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications. Carbohydr. Polym. 86, 1790-1798 (2011)
27. Kuribayashi, I. Characterization of composite cellulosic separators for rechargeable lithium-ion batteries. J. Power Sources 63, 87-91 (1996) (Pubitemid 126365848)
28. Chun, S. J. et al. Eco-friendly cellulose nanofiber paper-derived separator membranes featuring tunable nanoporous network channels for lithium-ion batteries. J. Mater. Chem. 22, 16618-16626 (2012)
29. Zhang, J. J. et al. Renewable and superior thermal-resistant cellulose-based composite nonwoven as lithium-ion battery separator. ACS Appl. Mater. Interfaces 5, 128-134 (2013)
30. Kim, J. H. et al. Colloidal silica nanoparticle-assisted structural control of cellulose nanofiber paper separators for lithium-ion batteries. J. Power Sources 242, 533-540 (2013)
31. Garvey, S. J., Anand, S. C., Rowe, T., Horrocks, A. R. & Walker, D. G. The flammability of hybrid viscose blends. Polym. Degrad. Stab. 54, 413-416 (1996) (Pubitemid 126410891)
32. Heidari, S. & Kallonen, R. Hybrid fibres in fire protection. Fire Mater. 17, 21-24 (1993) (Pubitemid 23643904)
33. Ding, J., Kong, Y., Li, P. & Yang, J. R. Polyimide/poly(ethylene terephthalate) composite membrane by electrospinning for nonwoven separator for lithium-ion battery. J. Electrochem. Soc. 159, A1474-A1480 (2012)
34. Hao, J. L. et al. A novel polyethylene terephthalate nonwoven separator based on electrospinning technique for lithium ion battery. J. Membrane Sci. 428, 11-16 (2013)
35. Prasanna, K. & Lee, C. W. Physical, thermal, and electrochemical characterization of stretched polyethylene separators for application in lithium-ion batteries. J Solid State Electr. 17, 1377-1382 (2013)
36. Qi,W. et al. Electrochemical performances and thermal properties of electrospun Poly(phthalazinone ether sulfone ketone) membrane for lithium-ion battery. Mater. Lett. 66, 239-241 (2012)
37. Wang, Y., Zhan,H. Y., Hu, J., Liang, Y.&Zeng, S. S. Wet-laid non-woven fabric for separator of lithium-ion battery. J. Power Sources 189, 616-619 (2009)
38. Ryou, M. H., Lee, Y. M., Park, J. K. & Choi, J. W. Mussel-Inspired Polydopamine- Treated Polyethylene Separators for High-Power Li-Ion Batteries. Adv. Mater. 23, 3066-3070 (2011)
39. Liu, K. S., Yao, X. & Jiang, L. Recent developments in bio-inspired special wettability. Chem. Soc. Rev. 39, 3240-3255 (2010)
40. Liu, Z. H. et al. A Core@sheath nanofibrous separator for lithium ion batteries obtained by coaxial electrospinning. Macromol. Mater. Eng. 298, 806-813 (2012)
41. Liu, H. Q. & Hsieh, Y. L. Ultrafine fibrous cellulose membranes from electrospinning of cellulose acetate. J. Polym. Sci. Phys. 40, 2119-2129 (2002) (Pubitemid 35019625)
42. Xiong, M. et al. Expanded polytetrafluoroethylene reinforced polyvinylidenefluoride-hexafluoropropylene separator with high thermal stability for lithium-ion batteries. J. Power Sources 241, 203-211 (2013)
43. Wu, N., Cao, Q.,Wang, X. Y. & Chen, Q. Q. Study of a novel porous gel polymer electrolyte based on TPU/PVdF by electrospinning technique. Solid State Ionics 203, 42-46 (2011)
44. Zhang, J. J., Ji, Q.,Wang, F. J., Tan, L. W. & Xia, Y. Z. Effects of divalent metal ions on the flame retardancy and pyrolysis products of alginate fibres. Polym. Degrad. Stabil. 97, 1034- (2012)
45. Cai, Z., Liu, Y., Liu, S., Li, L.&Zhang, Y. High performance of lithium-ion polymer battery based on non-aqueous lithiated perfluorinated sulfonic ion-exchange membranes. Energy Environ. Sci. 5, 5690-5693 (2012)
46. Sirisopanaporn, C., Fernicola, A. & Scrosati, B. New, ionic liquid-based membranes for lithium battery application. J. Power Sources 186, 490-495 (2009)
47. Ulaganathan, M., Nithya, R., Rajendran, S. & Raghu, S. Li-ion conduction on nanofiller incorporated PVdF-co-HFP based composite polymer blend electrolytes for flexible battery applications. Solid State Ionics 218, 7-12 (2012)
48. Croce, F., Focarete, M. L., Hassoun, J., Meschini, I. & Scrosati, B. A safe, high-rate and high-energy polymer lithium-ion battery based on gelled membranes prepared by electrospinning. Energy Environ. Sci. 4, 921-927 (2011)
49. Zhang, L. C., Sun, X., Hu, Z., Yuan, C. C. & Chen, C. H. Rice paper as a separator membrane in lithium-ion batteries. J. Power Sources 204, 149-154 (2012)
50. Xu, K.Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries. Chem. Rev. 104, 4303-4417 (2004)
51. Jabbour, L. et al. Aqueous processing of cellulose based paper-anodes for flexible Li-ion batteries. J. Mater. Chem. 22, 3227-3233 (2012)
52. Prasanth, R., Aravindan, V. & Srinivasan, M. Novel polymer electrolyte based on cob-web electrospun multi component polymer blend of polyacrylonitrile/ poly(methyl methacrylate)/polystyrene for lithium ion batteries-Preparation and electrochemical characterization. J. Power Sources 202, 299-307 (2012)
53. Kim, J. Y. & Lim, D. Y. Surface-Modified Membrane as A Separator for Lithium- Ion Polymer Battery. Energies 3, 866-885 (2010)
54. Jiang, W. et al. A high temperature operating nanofibrous polyimide separator in Li-ion battery. Solid State Ionics 232, 44-48 (2013)
55. Zhang, K. J. et al. Synthesis of nitrogen-doped MnO/graphene nanosheets hybrid material for lithium ion batteries. ACS Appl. Mater. Inter. 4, 658-664 (2012)
56. Wen, J. W., Yu, Y. & Chen, C. H. A review on lithium-ion batteries safety issues: existing problems and possible solutions. Mater Express 2, 197-212 (2012)
57. Huang, Y. H., Dass, R. I., Xing, Z. L. & Goodenough, J. B. Double perovskites as anode materials for solid-oxide fuel cells. Science 312, 254-257 (2006)
58. Wang, Y. S. et al. A zero-strain layered metal oxide as the negative electrode for long-life sodium-ion batteries . Nat. Commun. 4, 2365 (2013)
59. Sun, Y. et al. Direct atomic-scale confirmation of three-phase storage mechanism in Li4Ti5O12 anodes for room-temperature sodium-ion batteries. Nat. Commun. 4, 1870 (2013)
60. Pan, H. L., Hu, Y. S. & Chen, L. Q. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage. Energy Environ. Sci. 6, 2338-2360 (2013)