Influence of drying restraint on physical and mechanical properties of nanofibrillated cellulose films

Cellulose

Volumn 21, Issue 1, 2014, Pages 347-356

  Baez, Carlos ^a   Considine, John ^a   Rowlands, Robert ^b  

^a FOREST PRODUCTS LABORATORY   (United States)

^b UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

Cellulose nanofibers; Fiber orientation; Microfibrillated cellulose; Nanocellulose; Nanofibrillated cellulose; Restraint drying

Indexed keywords

CELLULOSE NANOFIBERS; CHEMICAL PRE-TREATMENT; MICROFIBRILLATED CELLULOSE; NANO-CELLULOSE; NANOFIBRILLATED CELLULOSE; NANOFIBRILLATED CELLULOSE (NFC); PHYSICAL AND MECHANICAL PROPERTIES; STRENGTH AND STIFFNESS;

BEAMS AND GIRDERS; CELLULOSE FILMS; FIBER REINFORCED MATERIALS; HYDROGEN BONDS; STIFFNESS;

CELLULOSE;

BEAMS; CELLULOSE FIBERS; DRYING; FIBER ORIENTATION; FIBRILLATION; HYDROGEN BONDS; STIFFNESS;

EID: 84893708781     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-013-0159-1     Document Type: Article

References (31)

1. Cheng Q, Wang SQ, Rials TG, Lee SH (2007) Physical and mechanical properties of polyvinyl alcohol and polypropylene composite materials reinforced with fibril aggregates isolated from regenerated cellulose fibers. Cellulose 14: 593-602.
2. Fukuzumi H, Saito T, Wata T, Kumamoto Y, Isogai A (2009) Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules 10: 162-165.
3. Gimaker M, Ostlund M, Ostlund S, Wagberg L (2011) Influence of beating and chemical additives on residual stresses in paper. Nord Pulp Pap Res J 26: 445-451.
4. Gindl W, Martinschitz KJ, Boesecke P, Keckes J (2006) Changes in the molecular orientation and tensile properties of uniaxially drawn cellulose films. Biomacromolecules 7: 3146-3150.
5. Gunderson DE, Considine JM, Scott CT (1988) The compressive load-strain curve of paperboard-rate of load and humidity effects. J Pulp Pap Sci 14: J37-J41.
6. Iwamoto S, Abe K, Yano H (2008) The effect of hemicelluloses on wood pulp nanofibrillation and nanofiber network characteristics. Biomacromolecules 9: 1022-1026.
7. Iwamoto S, Kai WH, Isogai A, Iwata T (2009) Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy. Biomacromolecules 10: 2571-2576.
8. Johnson RK, Zink-Sharp A, Renneckar SH, Glasser WG (2009) A new bio-based nanocomposite: fibrillated TEMPO-oxidized celluloses in hydroxypropylcellulose matrix. Cellulose 16: 227-238.
9. Josefsson G, Tanem BS, Li YJ, Vullum PE, Gamstedt EK (2013) Prediction of elastic properties of nanofibrillated cellulose from micromechanical modeling and nano-structure characterization by transmission electron microscopy. Cellulose 20: 761-770.
10. Klemm D, Kramer F, Moritz S, Lindstrom T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50: 5438-5466.
11. Moon RJ, Martini A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40: 3941-3994.
12. Nakagaito AN, Yano H (2008) The effect of fiber content on the mechanical and thermal expansion properties of biocomposites based on microfibrillated cellulose. Cellulose 15: 555-559.
13. Nakagaito AN, Iwamoto S, Yano H (2005) Bacterial cellulose: the ultimate nano-scalar cellulose morphology for the production of high-strength composites. Appl Phys A Mater 80: 93-97.
14. Nikolov S, Lebensohn RA, Raabe D (2006) Self-consistent modeling of large plastic deformation, texture and morphology evolution in semi-crystalline polymers. J Mech Phys Solids 54: 1350-1375.
15. Nishiyama Y, Kim UJ, Kim DY, Katsumata KS, May RP, Langan P (2003) Periodic disorder along ramie cellulose microfibrils. Biomacromolecules 4: 1013-1017.
16. Plackett D, Anturi H, Hedenqvist M, Ankerfors M, Gallstedt M, Lindstrom T, Siro I (2010) Physical properties and morphology of films prepared from microfibrillated cellulose and microfibrillated cellulose in combination with amylopectin. J Appl Polym Sci 117: 3601-3609.
17. Pleasants S, Batchelor WJ, Parker IH (1998) Measuring the fibril angle of bleached fibres using micro-Raman spectroscopy. Appita J 51: 373-376.
18. Purvis J, Bower DI (1974) Study of molecular-orientation in poly(methylmethacrylate) by means of laser-Raman spectroscopy. Polymer 15: 645-654.
19. Purvis J, Bower DI, Ward IM (1973) Molecular orientation in PET studied by polarized Raman-scattering. Polymer 14: 398-400.
20. Rowell R (1983) The chemistry of solid wood. American Chemical Society, Washington, DC.
21. Saito T, Kimura S, Nishiyama Y, Isogai A (2007) Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromolecules 8: 2485-2491.
22. Saito T, Hirota M, Tamura N, Kimura S, Fukuzumi H, Heux L, Isogai A (2009) Individualization of nano-sized plant cellulose fibrils by direct surface carboxylation using TEMPO catalyst under neutral conditions. Biomacromolecules 10: 1992-1996.
23. Sehaqui H, Liu AD, Zhou Q, Berglund LA (2010) Fast preparation procedure for large, flat cellulose and cellulose/inorganic nanopaper structures. Biomacromolecules 11: 2195-2198.
24. Sehaqui H, Mushi NE, Morimune S, Salajkova M, Nishino T, Berglund LA (2012) Cellulose nanofiber orientation in nanopaper and nanocomposites by cold drawing. ACS Appl Mater Interfaces 4: 1043-1049.
25. Spence KL, Venditti RA, Habibi Y, Rojas OJ, Pawlak JJ (2010) The effect of chemical composition on microfibrillar cellulose films from wood pulps: mechanical processing and physical properties. Bioresour Technol 101: 5961-5968.
26. Syverud K, Stenius P (2009) Strength and barrier properties of MFC films. Cellulose 16: 75-85.
27. Topgaard D, Soderman O (2001) Diffusion of water absorbed in cellulose fibers studied with H-1-NMR. Langmuir 17: 2694-2702.
28. Turbak AF, Snyder FW, Sandberg KR (1983) Microfibrillated cellulose, a new cellulose product: properties, uses, and commercial potential. J Appl Polym Sci 37: 815-827.
29. Wan JQ, Wang Y, Xiao Q (2010) Effects of hemicellulose removal on cellulose fiber structure and recycling characteristics of eucalyptus pulp. Bioresour Technol 101: 4577-4583.
30. Wiley JH, Atalla RH (1987) Band assignments in the Raman-spectra of celluloses. Carbohydr Res 160: 113-129.
31. Wise LE (1945) Quantitative isolation of hemicelluloses from coniferous woods: preliminary communication. Ind Eng Chem 17: 63-64.