Properties of poly(acrylamide)/TEMPO-oxidized cellulose nanofibril composite films

Cellulose

Volumn 21, Issue 1, 2014, Pages 291-299

  Kurihara, Takanori ^a,b   Isogai, Akira ^a  

^a UNIVERSITY OF TOKYO   (Japan)

^b Harima Chemicals Inc   (Japan)

Author keywords

Composite film; Mechanical properties; Mechanical reinforcement; Poly(acrylamide); TEMPO oxidized cellulose nanofibril

Indexed keywords

ATTRACTIVE INTERACTIONS; BRANCHING DEGREE; HOMOGENEOUS MIXTURES; LOW COEFFICIENT OF THERMAL EXPANSIONS; MECHANICAL REINFORCEMENT; NANOFIBRIL; OPTICAL TRANSPARENCY; YOUNG'S MODULUS;

AMIDES; CELLULOSE; DYES; ELASTIC MODULI; FILM PREPARATION; MECHANICAL PROPERTIES; MOLECULES; NANOFIBERS; OXIDATION; POLYVINYL ALCOHOLS; REINFORCEMENT; TENSILE STRENGTH;

COMPOSITE FILMS;

EID: 84893697297     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-013-0124-z     Document Type: Article

References (38)

1. Abe K, Iwamoto S, Yano H (2007) Obtaining cellulose nanofibers with a uniform width of 15 nm from wood. Biomacromolecules 8: 3276-3278.
2. Baraki H (2013) Structure-control of amphoteric polyacrylamide and its performance as dry strength resin. Jpn Tappi J 67(5): 544-549.
3. Bulota M, Hughes M (2012) Toughening mechanisms in poly(lactic) acid reinforced with TEMPO-oxidized cellulose. J Mater Sci 47: 5517-5523.
4. Bulota M, Tanpichai S, Hughes M, Eichhorn SJ (2012) Micromechanics of TEMPO-oxidized fibrillated cellulose composites. ACS Appl Mater Interfaces 4: 331-337.
5. De Souza Lima MM, Borsali R (2004) Rodlike cellulose microcrystals: structure, properties, and applications. Macromol Rapid Commun 25: 771-787.
6. Eichhorn SJ, Dufresne A, Aranguren M, Marcovich NE, Capadona JR, Rowan SJ, Weder C, Thielemans W, Roman M, Rennecker S, Gindl W, Veigel S, Keckes J, Yano H, Abe K, Nogi M, Nakagaito AN, Mangalam A, Simonsen J, Benight AS, Bismarck A, Berglund LA, Peijs T (2009) Review: current international research into cellulose nanofibers and nanocomposites. J Mater Sci 45: 1-33.
7. Endo R, Saito T, Isogai A (2013) TEMPO-oxidized cellulose nanofibril/poly(vinyl alcohol) composite drawn fibers. Polymer 54: 935-941.
8. Fujisawa S, Saito T, Kimura S, Iwata T, Isogai A (2013) Surface engineering of ultrafine cellulose nanofibrils toward polymer nanocomposite materials. Biomacromolecules 14: 1541-1546.
9. Fukuzumi H, Saito T, Iwata T, Kumamoto Y, Isogai A (2009) Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules 10: 162-165.
10. Fukuzumi H, Fujisawa S, Saito T, Isogai A (2013) Selective permeation of hydrogen gas using cellulose nanofibril film. Biomacromolecules 14: 1705-1709.
11. Henriksson M, Berglund LA, Isaksson P, Lindström T, Nishino T (2008) Cellulose nanopaper structures of high toughness. Biomacromolecules 9: 1579-1585.
12. Hirota M, Furihata K, Saito T, Kawada T, Isogai A (2010) Glucose/glucuronic acid alternating co-polysaccharides prepared from TEMPO-oxidized native celluloses by surface peeling. Angew Chem Int Ed 49: 7670-7672.
13. Hubbe MA (2006) Bonding between cellulosic fibers in the absence and presence of dry-strength agents-a review. Bioresources 1: 281-318.
14. Isogai A (2013) Wood nanocelluloses: fundamentals and applications as new bio-based nanomaterials. J Wood Sci. doi: 10. 1007/s10086-013-1365-z.
15. Isogai A, Saito T, Fukuzumi H (2011) TEMPO-oxidized cellulose nanofibers. Nanoscale 3: 71-85.
16. Iwamoto S, Kai W, Isogai A, Iwata T (2009) Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy. Biomacromolecules 10: 2571-2576.
17. Johnson RK, Zink-Sharp A, Renneckar SH, Glasser WG (2009) A new bio-based nanocompoiste: fibrillated TEMPO-oxidized celluloses in hydroxypropylcellulose matrix. Cellulose 16: 227-238.
18. Johnson RK, Zink-Sharp A, Glasser WG (2011) Preparation and characterization of hydrophobic derivatives of TEMPO-oxidized nanocelluloses. Cellulose 18: 1599-1609.
19. Klemm D, Kramer F, Moritz S, Lindström T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50: 5438-5466.
20. Li Z, Renneckar S, Barone JR (2010) Nanocomposites prepared by in situ enzymatic polymerization of phenol with TEMPO-oxidized nanocellulose. Cellulose 17: 57-68.
21. Lin KM, Chen YY (2009) Improvement of electrical properties of sol-gel derived ZnO: Ga films by infrared heating method. J Sol Gel Sci Technol 51: 215-221.
22. Liu A, Walther A, Ikkala O, Belova L, Berglund LA (2011) Clay nanopaper with tough cellulose nanofiber matrix for fire retardancy and gas barrier functions. Biomacromolecules 12: 633-641.
23. Nishino T, Matsuda I, Hirao K (2004) All-cellulose composite. Macromolecules 37: 7683-7687.
24. Okita Y, Saito T, Isogai A (2010) Entire surface oxidation of various cellulose microfibrils by TEMPO-mediated oxidation. Biomacromolecules 11: 1696-1700.
25. Qi ZD, Saito T, Fan Y, Isogai A (2012) Multifunctional coating films by layer-by-layer deposition of cellulose and chitin nanofibrils. Biomacromolecules 13: 553-558.
26. Saito T, Isogai A (2004) TEMPO-mediated oxidation of native cellulose. The effect of oxidation conditions on chemical and crystal structures of the water-insoluble fractions. Biomacromolecules 5: 1983-1989.
27. Saito T, Nishiyama Y, Putaux JL, Vignon M, Isogai A (2006) Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose. Biomacromolecules 7: 1687-1691.
28. Saito T, Kimura S, Nishiyama Y, Isogai A (2007) Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromolecules 8: 2485-2491.
29. Saito T, Kuramae R, Wohlert J, Berglund LA, Isogai A (2013) An ultrastrong nanofibrillar biomaterial: the strength of single cellulose nanofibrils revealed via sonication-induced fragmentation. Biomacromolecules 14: 248-253.
30. Sehaqui H, Liu A, Zhou Q, Berglund LA (2010) Fast preparation procedure for large, flat cellulose and cellulose/inorganic nanopaper structures. Biomacromolecules 11: 2195-2198.
31. Sehaqui H, Zhou Q, Berglund LA (2011) Nanostructured biocomposites of high toughness-a wood cellulose nanofiber network in ductile hydroxyethylcellulose matrix. Soft Matter 7: 7342-7350.
32. Shinoda R, Saito T, Okita Y, Isogai A (2012) Relationship between length and degree of polymerization of TEMPO-oxidized cellulose nanofibrils. Biomacromolecules 13: 842-849.
33. Siqueira G, Bras J, Dufresne A (2010) Cellulosic bionanocomposites: a review of preparation, properties and applications. Polymers 2: 728-765.
34. Siró I, Plackett D (2010) Microfibrillated cellulose and new nanocompoiste materials: a review. Cellulose 17: 459-494.
35. 3 films prepared by the sol-gel method. J Appl Phys 106: 044102.
36. Wang Y, Hubbe MA, Sezaki T, Wang X, Rojas OL, Argyropoulos DS (2006) The role of polyampholyte charge density on its interactions with cellulose. Nord Pulp Paper Res J 21: 638-645.
37. Wu CN, Saito T, Fujisawa S, Fukuzumi H, Isogai A (2012) Ultrastrong and high gas-barrier nanocellulose/clay-layered composites. Biomacromolecules 13: 1927-1932.
38. Yoshimoto Y, Iwasa Y, Fujiwara T (2004) Study on the mechanism of PAMs as paper dry strength agents. Proceeding of the 71st Pulp and Paper Research Conference, pp 123-125.