Pressure viscosity coefficient of vegetable oils

Tribology Letters

Volumn 49, Issue 3, 2013, Pages 501-512

  Biresaw, Girma ^a   Bantchev, Grigor B ^a  

^a NATIONAL CENTER FOR AGRICULTURAL UTILIZATION RESEARCH   (United States)

Author keywords

Biodegradable oils; Density; Elastohydrodynamic (EHD); Film thickness; Hexadecane; Polyalphaolefin (PAO); Pressure viscosity coefficient (PVC); Synthetic hydrocarbons; Vegetable oils; Viscosity

Indexed keywords

BIO-DEGRADABLE OIL; HEXADECANE; POLYALPHAOLEFINS; PRESSURE-VISCOSITY COEFFICIENT; SYNTHETIC HYDROCARBONS;

DENSITY (SPECIFIC GRAVITY); FILM THICKNESS; MOLECULAR STRUCTURE; PARAFFINS; PHYSICAL PROPERTIES; VEGETABLE OILS;

VISCOSITY;

EID: 84892851050     PISSN: 10238883     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11249-012-0091-9     Document Type: Article

References (76)

1. Schneider, M.P.: Plant-oil-based lubricants and hydraulic fluids. J. Sci. Food Agric. 86, 1769-1780 (2006)
2. Lawate, S.S., Lal, K., Huang, C.: Vegetable oilsstructure and performance. In: Booser, E.R. (ed.) Tribology data handbook, pp. 103-116. CRC Press, New York (1997)
3. Graiver, D., Narayan, R.: Value-added chemicals from catalytic ozonation of vegetable oils. Lipid Technol. 18, 31-35 (2006)
4. Meier, M.A.R., Metzger, J.O., Schubert, U.S.: Plant oil renewable resources as green alternatives in polymer science. Chem. Soc. Rev. 36, 1788-1802 (2007)
5. Bremmer, B.J., Plonsker, L.: Bio-based lubricants: a market opportunity study update. Omni-Tech International, Midland (2008)
6. Fox, N.J., Stachowiak, G.W.: Vegetable oil-based lubricantsa review of oxidation. Tribol. Int. 40, 1035-1046 (2007)
7. Jayadas, N.H., Nair, K.P.: Coconut oil as base oil for industrial lubricantsevaluation and modification of thermal oxidative and low temperature properties. Tribol. Int. 39, 873-878 (2006)
8. Annon: Lubricants industry factbook, pp. 1-24. LNG Publishing Company, Inc., Falls Church (2011)
9. Ohno, N., Shiratake, A., Kuwano, N., Hirano, F.: Behavior of some vegetable oils in EHL contacts. Tribol. Ser. 32, 243-251 (1997)
10. Mia, S., Hayashi, S., Ohno, N.: High pressure tribological behavior of vegetable oils as lubricant, pp. 1-5. Proc. Int. Conf. Mech. Eng. (ICME2007) FL07, Dhaka (2007)
11. Hersey, M.D., Hopkins, R.F.: Collected results on viscosity of lubricants under pressure. I. Fatty oils. J. Appl. Phys. 8, 560-566 (1937)
12. Bantchev, G., Biresaw, G.: Film-forming properties of castor oilpolyol ester blends in elastohydrodynamic conditions. Lubr. Sci. 23, 203-248 (2011)
13. Zolotykh, E.V., Kuznetsov, D.I., Krupina, A.N.: Viscosities of some liquids at high pressures. J. Eng. Phys. TD 29, 1163-1166 (1975)
14. Roelands, C.J.A.: Correlational aspects of the viscositytemperaturepressure relationship of lubricating oils. PhD thesis, Technical University Delft, Delft (1966). http://repository.tudelft.nl/view/ir/ uuid:1fb56839-9589-4ffb-98aa-4a20968d1f90/
15. Barlow, A.J., Harrison, G., Kim, M.G., Lamb, J.: Pressure dependence of the viscoelastic properties of castor oil. J. Chem. Soc. Faraday Trans. II(69), 1446-1453 (1973)
16. Stachowiak, G.W., Batchelor, A.W.: Engineering tribology, pp. 16-21. Butterworth and Heinemann, Boston (2001)
17. Biresaw, G.: Elastohydrodynamic properties of seed oils. J. Am. Oil Chem. Soc. 83, 559-566 (2006)
18. Bantchev, G., Biresaw, G.: Elastohydrodynamic study of vegetable oilpolyalphaolefin blends. Lubr. Sci. 20, 283-297 (2008)
19. Schaschke, C.J., Abid, S., Heslop, M.J.: High-pressure viscosity measurements of fatty acids and oils. High Press. Res. 27, 33-37 (2007)
20. Hoglund, E.: Influence of lubricant properties on elastohydrodynamic lubrication. Wear 232, 176-184 (1999)
21. Cloesen, C., Kabuya, A., Rozetclosen, J.L.: The optical EHD method applied to the study of ageing of biodegradable oils. J. Synth. Lubr. 15, 3-12 (1998)
22. So, B.Y.C., Klaus, E.E.: Viscositypressure correlation of liquids. ASLE Trans. 23, 409-421 (1980)
23. Hamrock, B.J., Dowson, D.: Isothermal elastohydrodynamic lubrication of point contacts. IIIfully flooded results. Trans. ASME J. Lubr. Technol. 99, 264-276 (1977)
24. Foord, C.A., Hammann, W.C., Cameron, A.: Evaluation of lubricated rolling/sliding contacts. Proc. I. Mech. Eng. 11, 41-68 (1968)
25. Spikes, H.A., Cann, P.M., Caporiccio, G.: Elastohydrodynamic film thickness measurements of perfluoropolyether fluids. J. Synth. Lubr. 1, 73-86 (1984)
26. Barus, C.: Isothermals, isopiestics and isometrics relative to viscosity. Am. J. Sci. 45, 87-96 (1893)
27. LaFountain, A., Johnston, G.J., Spikes, H.A.: Elastohydrodynamic friction behavior of polyalphaolefin blends (Tribology for Energy Conservation). Tribol. Ser. 34, 465-475 (1998)
28. Biresaw, G., Bantchev, G.B.: Effect of chemical structure on filmforming properties of seed oils. J. Synth. Lubr. 25, 159-183 (2008)
29. Schey, J.A.: Tribology in metalworking friction. Lubrication and wear, pp. 27-130. American Society of Metals, Metals Park (1983)
30. Harris, K.R., Bair, S.: Temperature and pressure dependence of the viscosity of diisodecyl phthalate at temperatures between 0 and 100°C and at pressures to 1 GPa. J. Chem. Eng. Data 52, 272-278 (2007)
31. Jones, W.R., Johnson, R.L., Winer, W.O., Sanborn, D.M.: Pressure viscosity measurements for several lubricants to 5.5 9 108 Newtons per square meter (8 9 104 PSI) and 149°C (300°F). ASLE Trans. 18, 249-262 (1975)
32. Larsson, R., Kassfeldt, E., Byheden, A., Norrby, T.: Base fluid parameters for elastohydrodynamic lubrication and friction calculations and their influence on lubrication capability. J. Synth. Lubr. 18, 183-198 (2001)
33. Zhu, D.: Elastohydrodynamic lubrication in extended parameter rangesPart IV: effect of material properties. Tribol. Trans. 47, 7-16 (2004)
34. Cooper, D., Moore, A.J.: Application of the ultra-thin elastohydrodynamic oil film thickness technique to the study of automotive engine oils. Wear 175, 93-105 (1994)
35. Lugt, P.M., Morales-Espejel, G.E.: A review of elasto-hydrodynamic lubrication theory. Tribol. Trans. 54, 470-496 (2011)
36. Mia, S., Ohno, N.: Prediction of pressureviscosity coefficient of lubricating oils based on sound velocity. Lubr. Sci. 21, 343-354 (2009)
37. Kielczynski, P., Szalewski, M., Balcerzak, A., Rostocki, A.J., Tefelski, D.B.: Application of SH surface acoustic waves for measuring the viscosity of liquids in function of pressure and temperature. Ultrasonics 51, 921-924 (2011)
38. Rostocki, A.J., Siegoczyński, R.M., Kielczyński, P., Szalewski, M.: An application of Love SH waves for the viscosity measurement of triglycerides at high pressures. High Press. Res. 30, 88-92 (2010)
39. Siegoczynski, R.M., Rostocki, A.J., Kielczynski, P., Szalewski, M.: A viscosity measurement during the high pressure phase transition in triolein. J. Phys. Conf. Ser. 121 (2008). doi: 10.1088/1742-6596/121/4/142010
40. Spikes, H.A., Hammond, C.J.: The elastohydrodynamic film thicknesses of binary esterether mixtures. ASLE Trans. 24, 542-548 (1981)
41. McCoull, N., Walther, C.: Viscositytemperature chart. Lubrication, vol. 7, no. 6. Texaco Inc., New York, NY (1921)
42. Anon.: Standard viscositytemperature charts for liquid petroleum products. ASTM D 341-93, 05.01, 171-176 (2002)
43. Benchaita, M.T., Schwartz, R.D., Lockwood, F.E.: Separation and tribological evaluation of paraffinic base stocks. Tribol. Trans. 33, 85-95 (1990)
44. Mehrotra, A.K.: Modeling the effects of temperature, pressure, and composition on the viscosity of crude oil mixtures. Ind. Eng. Chem. Res. 29, 1574-1578 (1990)
45. Aderin, M., Johnston, G.J., Spikes, H.A.: The elastohydrodynamic properties of some advanced non-hydrocarbon-based lubricants. Lubr. Eng. 48, 633-638 (1992)
46. Akei, M., Mizuhara, K., Taki, T., Yamamoto, T.: Evaluation of film-forming capability of refrigeration lubricants in pressurized refrigerant atmosphere. Wear 196, 180-187 (1996)
47. Gunsel, S., Korcek, S., Smeeth, M., Spikes, H.A.: The elastohydrodynamic friction and film forming properties of lubricant base oils. Tribol. Trans. 42, 559-569 (1999)
48. Yokoyama, F., Spikes, H.A.: Film-forming properties of polyol esters, polyphenyl ethers and their mixtures over a wide range of temperature. Tribol. Trans. 43, 130-136 (2000)
49. LaFountain, A.R., Johnston, G.J., Spikes, H.A.: The elastohydrodynamic traction of synthetic base oil blends. Tribol. Trans. 44, 648-656 (2001)
50. Hourani, M.J., Hessell, E.T., Abramshe, R.A., Liang, J.: Alkylated naphthalenes as high-performance synthetic lubricating fluids. Tribol. Trans. 50, 82-87 (2007)
51. Biresaw, G., Cermak, S.C., Isbell, T.A.: Film-forming properties of estolides. Tribol. Lett. 27, 69-78 (2007)
52. Anon.: Standard test method for kinematic viscosity of transparent and opaque liquids (the calculation of dynamic viscosity). ASTM D 445-01. 05.01, 187-196 (2002)
53. Anon.: Standard practice for calculating viscosity index from kinematic viscosity at 40 and 100°C. ASTM D 2270-93. 05.01, 769-774 (2002)
54. Johnston, G.J., Wayte, R., Spikes, H.A.: The measurement and study of very thin lubricant films in concentrated contacts. Tribol. Trans. 34, 187-194 (1991)
55. Biresaw, G., Bantchev, G.: Elastohydrodynamic (EHD) traction properties of seed oils. Tribol. Trans. 53, 573-583 (2010)
56. Wu, C.S., Klaus, E.E., Duda, J.L.: Development of a method for the prediction of pressureviscosity coefficients of lubricating oils based on free-volume theory. Trans. ASME J. Tribol. 111, 121-128 (1989)
57. Johnston, W.G.: A method to calculate the pressureviscosity coefficient from bulk properties of lubricants. ASLE Trans. 24, 232-238 (1981)
58. Wright, W.A.: Prediction of bulk moduli and pressurevolumetemperature data for petroleum oils. ASLE Trans. 10, 349-356 (1967)
59. Lockwood, F.E., Benchaita, M.T., Friberg, S.E.: Study of lyotropic liquid crystals in viscometric flow and elastohydrodynamic contact. ASLE Trans. 30, 539-548 (1986)
60. Biresaw, G., Adharyu, A., Erhan, S.Z.: Friction properties of vegetable oils. J. Am. Oil Chem. Soc. 80, 697-704 (2003)
61. Rudnick, L.R., Abdellatif, M.A., Gul, O., Biresaw, G.: Vaporization and carbonization tendency of vegetable oils as a function of chemical composition: morphology of carbon deposits on steel surfaces at elevated temperature. In: Biresaw, G., Mittal, K.L. (eds.) Surfactants in tribology, vol. 2, pp. 409-433. Taylor & Francis, Boca Raton (2011)
62. Hope, K.: Balancing lubricant properties with vegetable oil and PAO blends. Proceedings of the Lubricants and Fluids Technical Advisory Panel, United Soybean Board, Chicago, 19-20 Sept 2006
63. Asadauskas, S.J., Biresaw, G., McClure, T.G.: Effects of chlorinated paraffin and ZDDP concentrations on boundary lubrication properties of mineral and soybean oils. Tribol. Lett. 37, 111-121 (2010)
64. Biresaw, G., Bantchev, G.B., Cermak, S.C.: Tribological properties of sulfur modified vegetable oils. Tribol. Lett. 43, 17-32 (2011)
65. Tanaka, Y., Hosokawa, H., Kubota, H., Makita, T.: Viscosity and density of binary mixtures of cyclohexane with n-octane, ndodecane, and n-hexadecane under high pressures. Int. J. Thermophys. 12, 245-264 (1991)
66. Reich, R.A., Stewart, P.A., Bohaychick, J., Urbanski, J.A.: Base oil properties of ionic liquid. Lubr. Eng. 59, 16-21, 44 (2003)
67. Pensado, A.S., Comunas, M.J.P., Fernandez, J.: The pressure-viscosity coefficient of several ionic liquids. Tribol. Lett. 31, 107-118 (2008)
68. Venier, C.G., Casserly, E.W., Gunsel, S.: Tris(2-octyldodecyl) cyclopentane, a low volatility, wide liquid range, hydrocarbon fluid. J. Synth. Lubr. 9, 237-252 (1992)
69. Sarpal, A.S., Sastry, M.I.S., Kapur, G.S., Bansal, V., Mehta, A.K., Bhatnagar, A.K.: Molecular dynamics studies of a lubricating base oils by NMR spectroscopic techniques. Lubr. Sci. 16, 361-375 (2004)
70. Battez, A.H., Rico, J.E., Rodriguez, R.C.: Rolling fatigue tests of three polyglycol lubricants. Wear 258, 1467-1470 (2005)
71. Aderin, M.E., Johnston, G.J., Spikes, H.A., Balson, T.G., Emery, M.G.: The film-forming properties of polyalkylene glycols. Lubr. Sci. 10, 23-45 (1993)
72. Bair, S.: Pressureviscosity behavior of lubricants to 1.4 GPa and its relation to EHD traction. Tribol. Trans. 43, 91-99 (2000)
73. Ohno, N., Kuwano, N., Hirano, F.: Effect of bulk modulus of solidified oils under high pressure on tractional behavior. Jpn. J. Tribol. 38, 1361-1372 (1993)
74. Foord, C.A., Hammann, W.C., Cameron, A.: Evaluation of lubricants using optical elastohydrodynamics. ASLE Trans. 11, 31-43 (1968)
75. Yasutomi, S., Bair, S., Winer, W.O.: An application of a free volume model to lubricant rheology 1dependence of viscosity on temperature and pressure. Trans. ASME J. Tribol. 106, 291-303 (1984)
76. Ohno, N., Sunahara, K., Kumamoto, T., Hirano, F.: Prediction of liquid lubricant viscosity at high pressure from the density measurements. Jpn. J. Tribol 44, 377-388 (1999)