Machining dynamics: Frequency response to improved productivity

Machining Dynamics: Frequency Response to Improved Productivity

Volumn , Issue , 2009, Pages 1-303

  Schmitz, Tony L ^a   Smith, Kevin S ^b  

^a University of Florida   (United States)

^b University of North Carolina at Charlotte   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84892818816     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-0-387-09645-2     Document Type: Book

References (146)

1. http://www.en.wikipedia.org/wiki/Standing\-on\-the\-shoulders\-of\ -giants, accessed April, 2008.
2. Taylor, F.W., 1906, On the Art of Cutting Metals, Transactions of the ASME, 28: 31-248.
3. Merchant, M.E., 1950, Metal Cutting Research - Theory and Practice, Machining -Theory and Practice, ASM, 5-44.
4. Komanduri, R., 1993, Machining and Grinding: A Historical Review of the Classical Papers, Applied Mechanics Review, 46/3: 80-132.
5. Koenisgberger, F. and Sabberwal, A., 1961, An Investigation into the Cutting Force Pulsations during Milling Operations, International Journal of Machine Tool Design and Research, 1: 15-33.
6. Tlusty, J. and Polacek, M., 1957, Besipiele der behandlung der selbsterregten Schwingung der Werkzeugmaschinen, FoKoMa, Hanser Verlag, Munchen.
7. Tobias, S.A. and Fishwick, W., 1958, Theory of Regenerative Machine Tool Chatter, The Engineer, London, 258.
8. Tlusty, J. and Polaceck, M., 1963, The Stability of Machine Tools Against Self-excited Vibrations in Machining, International Research in Production Engineering, 465-474.
9. Merrit, H., 1965, Theory of Self-Excited Machine Tool Chatter, Journal of Engineering for Industry, 87/4: 447-454.
10. Arnold, R., 1946, The Mechanism of Tool Vibration in the Cutting of Steel, Proceedings of the Institution of Mechanical Engineers, 54: 261-284.
11. Tlusty, J., 1978, Analysis of the State of Research in Cutting Dynamics, Annals of the CIRP, 27/2: 583-589.
12. Smith, S. and Tlusty, J., 1991, An Overview of Modeling and Simulation of the Milling Process, Journal of Engineering for Industry, 113/2: 169-175.
13. Smith, S. and Tlusty, J., 1993, Efficient Simulation Programs for Chatter in Milling, Annals of the CIRP, 42/1: 463-466.
14. Ehmann, K., Kapoor, S., DeVor. R., and Lazoglu, I., 1997, Machining Process Modeling: A Review, Journal of Manufacturing Science and Engineering, 119/4B: 655-663.
15. Smith, S. and Tlusty, J., 1997, Current Trends in High-Speed Machining, Journal of Manufacturing Science and Engineering, 119/4B: 664-666.
16. Merchant, M.E., 1998, An Interpretive Look at 20th Century Research on Modeling of Machining, Machining Science and Technology, 2/2: 157-163.
17. Altintas, Y. and Weck, M., 2004, Chatter Stability of Metal Cutting and Grinding, Annals of the CIRP, 53/2: 619-642.
18. Thomson, W. and Dahleh, M., 1998, Theory of Vibration with Application, 5th Ed., Prentice Hall, Upper Saddle River, NJ.
19. Weaver, Jr., W., Timoshenko, S., and Young, D., 1990, Vibration Problems in Engineering, 5th Ed., John Wiley and Sons, New York, NY.
20. Inman, D., 2001, Engineering Vibration, 2nd Ed., Prentice Hall, Upper Saddle River, NJ, Section 1.10.
21. Thomson, W. and Dahleh, M., 1998, Theory of Vibration with Application, 5th Ed., Prentice Hall, Upper Saddle River, NJ, Section 3.9.
22. Leon, J., 1994, Linear Algebra with Applications, 4th Ed., Prentice Hall, Englewood Cliffs, NJ, Section 5.6.
23. Ewins, D., 2000, Modal Testing: Theory, Practice, and Application, 2nd Ed., Taylor & Francis, London.
24. Kim, H. and Schmitz, T., 2007, Bivariate Uncertainty Analysis for Impact Testing, Measurement Science and Technology, 18: 3565-3571.
25. Jobson J., 1992, Applied Multivariate Data Analysis, Springer, New York, NY.
26. Ridler, N. and Salter, M., 2002, An Approach to the Treatment of Uncertainty in Complex S-parameter Measurements, Metrologia, 39: 295-302.
27. Hall B., 2004, On the Propagation of Uncertainty in Complex-valued Quantities, Metrologia, 41: 173-177.
28. International Standards Organization (ISO), 1993, Guide to the Expression of Uncertainty in Measurement (Corrected and Reprinted 1995).
29. Ashory, M., 1999, High Quality Modal Testing Methods, Ph.D. Dissertation, Imperial College of Science, Technology, and Medicine, London.
30. Trent, E. and Wright, P., 2000, Metal Cutting, 4th Ed., Butterworth-Heinemann, Boston, M.A.
31. Tlusty, G., 2000, Manufacturing Equipment and Processes, Prentice-Hall, Upper Saddle River, NJ.
32. Altintas, Y., 2000, Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design, Cambridge University Press, Cambridge.
33. Stephenson, D. and Agapiou, J., 1997, Metal Cutting Theory and Practice, Marcel Dekker, Inc., New York, NY.
34. Kumanchik, L. and Schmitz, T., 2007, Improved Analytical Chip Thickness Model for Milling, Precision Engineering, 31: 317-324.
35. Tlusty, J., W. Zaton, and F. Ismail, 1983, Stability Lobes in Milling, Annals of the CIRP, 32/1: 309-313.
36. Smith, S., and Tlusty, J., 1990, Update on High-Speed Milling Dynamics, Journal of Engineering for Industry, 112: 142-149.
37. Smith, S. and Tlusty, J., 1991, An Overview of Modeling and Simulation of the Milling Process, Journal of Engineering for Industry, 113: 169-175.
38. Altintas, Y. and Budak, E., 1995, Analytical Prediction of Stability Lobes in Milling, Annals of the CIRP, 44/1: 357-362.
39. Davies, M., Pratt, J., Dutterer, B., and Burns, T., 2000, The Stability of Low Radial Immersion Milling, Annals of the CIRP, 49/1: 37-40.
40. Davies, M., Pratt, J., Dutterer, B., and Burns, T., 2002, Stability Prediction for Low Radial Immersion Milling, Journal of Manufacturing Science and Engineering, 124/2: 217-225.
41. Bayly, P., Mann, B., Schmitz, T., Peters, D., Stépàn, G., Insperger, T., 2002, Effects of Radial Immersion and Cutting Direction on Chatter Instability in Endmilling, Proceedings of ASME International Mechanical Engineering Conference and Exposition, IMECE2002-34116, New Orleans, LA (on CD).
42. Mann, B., Bayly, P., Davies, M., and Halley, J., 2004, Limit Cycles, Bifurcations, and Accuracy of the Milling Process, Journal of Sound and Vibration, 227: 31-48.
43. Smith, S. and Tlusty, J., 1991, An Overview of Modeling and Simulation of the Milling Process, Journal of Engineering for Industry, 113: 169-175.
44. Tlusty, G., 2000, Manufacturing Equipment and Processes, Prentice-Hall, Upper Saddle River, NJ, Section 9.5.4.
45. Altintas, Y. and Lee, P., 1996, A General Mechanics and Dynamics Model for Helical End Mills, Annals of the CIRP, 45/1: 59-64.
46. Altintas, Y., 2000, Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design, Cambridge University Press, Cambridge, Section 2.8.1.
47. Chapra, S. and Canale, R., 1985, Numerical Methods for Engineers, McGraw-Hill Book Co., New York, NY, Section 10.1.
48. Duncan, G.S., 2006, Milling Dynamics Prediction and Uncertainty Analysis using Receptance Coupling Substructure Analysis, Ph.D. Dissertation, University of Florida, http://highspeedmachining.mae.ufl.edu/htmlsite/duncan-g.pdf.
49. Koenisgberger, F. and Sabberwal, A., 1961, An Investigation into the Cutting Force Pulsations during Milling Operations, International Journal of Machine Tool Design and Research, 1: 15-33.
50. Tlusty, J. and MacNeil, P., 1975, Dynamics of Cutting Forces in End Milling, Annals of the CIRP, 24/1: 21-25.
51. Kline, W., DeVor, R., and Lindberg, J., 1982, The Prediction of Cutting Forces in End Milling with Applications to Cornering Cuts, International Journal of Machine Tool Design and Research, 22: 7-22.
52. Fu, H., DeVor, R., and Kapoor, S., 1984, A Mechanistic Model for the Prediction of the Force System in Face Milling Operations, Journal of Engineering for Industry, 111: 27-36.
53. Yellowley, I., 1985, Observations of the Mean Values of Forces, Torque and Specific Power in the Peripheral Milling Process, International Journal of Machine Tool Design and Research, 25: 337-346.
54. Amarego, E. and Whitfield, R., 1985, Computer Based Modeling of Popular Machining Operations for Forces and Power Prediction, Annals of the CIRP, 34: 65-69.
55. Wang, J.-J., Liang, S., and Book, W., 1994, Convolution Analysis of Cutting Force Pulsation, Journal of Engineering for Industry, 116: 17-25.
56. Endres, W., DeVor, R., and Kapoor, S., 1995, A Dual-Mechanism Approach to the Prediction of Machining Forces, Part 1: Model Development, Journal of Engineering for Industry, 117: 526-533.
57. Budak, E., Altintas, Y., and Amarego, E., 1998, Prediction of Milling Force Coefficients from Orthogonal Cutting Data, Journal of Manufacturing Science and Engineering, 118: 216-224.
58. Jayaram, S., Kapoor, S., and DeVor, R., 2001, Estimation of the Specific Cutting Pressures for Mechanistic Cutting Force Models, International Journal of Machine Tools and Manufacture, 41: 265-281.
59. Wang, J.-J., and Zheng, C., 2002, An Analytical Force Model with Shearing and Ploughing Mechanisms for End Milling, International Journal of Machine Tools and Manufacture, 42: 761-771.
60. Jensen, S., Shin, Y., and Davies, P., 1996, Inverse Filtering of Unwanted System Dynamics in Cutting Force Measurement, Proceedings of the Dynamic Systems and Control Division, ASME International Mechanical Engineering Conference and Exposition, Atlanta, GA, pp. 167-174.
61. Smith, D., Smith, S., and Tlusty, J., 1998, High Performance Milling Torque Sensor, Journal of Manufacturing Science and Engineering, 120/3: 504-514.
62. Kline, W., DeVor, R., and Shareef, I., 1982, The Prediction of Surface Accuracy in End Milling, Journal of Engineering for Industry, 104: 272-278.
63. Kline, W., DeVor, R., and Lindberg, J., 1982, The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts, International Journal of Machine Tool Design Research, 22: 7-22.
64. Tlusty, J., 1985, Effect of End Milling Deflections on Accuracy, in: R.I. King (Ed.), Handbook of High Speed Machining Technology, Chapman and Hall, New York, pp. 140-153.
65. Sutherland, J. and DeVor, R., 1986, An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems, Journal of Engineering for Industry, 108: 269-279.
66. Montgomery, D. and Altintas, Y., 1991, Mechanism of Cutting Force and Surface Generation in Dynamic Milling, Journal of Engineering for Industry, 113/2: 160-168.
67. Smith, S. and Tlusty, J., 1991, An Overview of Modeling and Simulation of the Milling Process, Journal of Engineering for Industry, 113/2: 169-175.
68. Altintas, Y., Montgomery, D., and Budak, E., 1992, Dynamic Peripheral Milling of Flexible Structures, Journal of Engineering for Industry, 114/2: 137-145.
69. Tarng, Y., Liao, C., and Li, H., 1994, A Mechanistic Model for Prediction of the Dynamics of Cutting Forces in Helical End Milling, International Journal of Modeling and Simulation, 14/2: 92-97.
70. Schmitz, T. and Ziegert, J., 1999, Examination of Surface Location Error Due to Phasing of Cutter Vibrations, Precision Engineering, 23/1: 51-62.
71. Altintas, Y., 2000, Manufacturing Automation, Cambridge University Press, Cambridge, UK.
72. Mann, B., Bayly, P, Davies, M. and Halley, J., 2004, Limit Cycles, Bifurcations, and Accuracy of the Milling Process, Journal of Sound and Vibration, 277: 31-48.
73. Schmitz, T., Couey, J., Marsh, E., Mauntler, N., and Hughes, D., 2007, Runout Effects in Milling: Surface finish, Surface Location Error, and Stability, International Journal of Machine Tools and Manufacture, 47: 841-851.
74. Yun, W.-S., Ko, J., Cho, D.-W., and Ehmann, K., 2002, Development of a Virtual Machining System, Part 2: Prediction and Analysis of a Machined Surface Error, International Journal of Machine Tools and Manufacture, 42: 1607-1615.
75. Tlusty, G., 2000, Manufacturing Equipment and Processes, Prentice-Hall, Upper Saddle River, NJ, Section 9.5.5, Fig. 9.50.
76. Schmitz, T., Ziegert, J., Canning, J.S., and Zapata, R., 2007, Case Study: A Comparison of Error Sources in High-Speed Milling, Precision Engineering, 32: 126-133.
77. Tlusty, J., Zaton, W., and Ismail, F., 1983, Stability Lobes in Milling, Annals of the CIRP, 32/1: 309-313.
78. Altintas, Y. and Budak, E., 1995, Analytical Prediction of Stability Lobes in Milling, Annals of the CIRP, 44/1: 357-362.
79. Schmitz, T. and Mann, B., 2006, Closed Form Solutions for Surface Location Error in Milling, International Journal of Machine Tools and Manufacture, 46: 1369-1377.
80. Ikua, B.W., Tanaka, H., Obata, F., and Sakamoto, S., 2001, Prediction of Cutting Forces and Machining Error in Ball End Milling of Curved Surfaces - I. Theoretical Analysis, Precision Engineering, 25/4: 266-73.
81. Ranganath, S., Narayanan, K., and Sutherland, J., 1999, The Role of Flank Face Interference in Improving the Accuracy of Dynamic Force Predictions in Peripheral Milling, Journal of Manufacturing Science and Engineering, 121: 593-599.
82. Campomanes, M.L. and Altintas, Y., 2003, An Improved Time Domain Simulation for Dynamic Milling at Small Radial Immersions, Journal of Manufacturing Science and Engineering, 125: 416-422.
83. Schmitz, T., Couey, J., Marsh, E., Mauntler, N., and Hughes, D., 2007, Runout Effects in Milling: Surface finish, Surface Location Error, and Stability, International Journal of Machine Tools and Manufacture, 47: 841-851.
84. Chau, W.-M., 1992, Accuracy of Milling Operations Based on Dynamic Models and Simulation, M.S. Thesis, University of Florida.
85. American Society of Mechanical Engineers, 2003, ASME B46.1-2002, Surface Texture (Surface Roughness, Waviness, and Lay), New York, NY.
86. Tlusty, J., W. Zaton, and F. Ismail, 1983, Stability Lobes in Milling, Annals of the CIRP, 32/1: 309-313.
87. Smith, S. and Tlusty, J., 1992, Stabilizing Chatter by Automatic Spindle Speed Regulation, Annals of the CIRP, 41/1: 433-436.
88. Delio, T., Tlusty, J., and Smith, S., 1992, Use of Audio Signals for Chatter Detection and Control, Journal of Engineering for Industry, 114: 146-157.
89. Smith, D., Smith, S., and Tlusty, J., 1998, High Performance Milling Torque Sensor, Journal of Manufacturing Science and Engineering, 120/3: 504-514.
90. Smith, S. and Delio, T., 1992, Sensor-based Chatter Detection and Avoidance by Spindle Speed Selection, Journal of Dynamic Systems, Measurement, and Control, 114/3: 486-492.
91. Schmitz, T., Davies, M., Medicus, K., Snyder, J., 2001, Improving High-Speed Machining Material Removal Rates by Rapid Dynamic Analysis, Annals of the CIRP, 50/1: 263-268.
92. Schmitz, T., Medicus, K., and Dutterer, B., 2002, Exploring Once-per-revolution Audio Signal Variance as a Chatter Indicator, Machining Science and Technology, 6/2: 215-233.
93. Schmitz, T., 2003, Chatter Recognition by a Statistical Evaluation of the Synchronously Sampled Audio Signal, Journal of Sound and Vibration, 262/3: 721-730.
94. Cheng, C.-H., Duncan, G.S., and Schmitz, T., 2007, Rotating Tool Point Frequency Response Prediction using RCSA, Machining Science and Technology, 11/3: 433-446.
95. Davies, M., Dutterer, B., Pratt, J., and Schaut, A., 1998, On the Dynamics of High-Speed Milling with Long, Slender Endmills, Annals of the CIRP 47/1: 55-60.
96. Tlusty, J., 1959, Systems and Methods of Machine Tool Testing, Microtechnic, 13: 162-178.
97. Bryan, J., Clouser, R., and Holland, B., 1967, Spindle Accuracy, American Machinist, 149-64.
98. American National Standards Institute, American Society of Mechanical Engineers, 1985, ANSI/ASME B89.3.4 M, Axes of Rotation: Methods for Specifying and Testing, New York.
99. Smith, S. and Winfough, W.R., 1994, The Effect of Runout Filtering on the Identification of Chatter in the Audio spectrum of Milling, Transactions of the NAMRI/SME, 22: 173-178.
100. Schmitz, T., Couey, J., Marsh, E., Mauntler, N., and Hughes, D., 2007, Runout Effects in Milling: Surface finish, Surface Location Error, and Stability, International Journal of Machine Tools and Manufacture, 47: 841-851.
101. Kline, W. and DeVor, R., 1983, The Effect of Runout on Cutting Geometry and Forces in End Milling, International Journal of Machine Tool Design and Research, 23/2-3: 123-140.
102. Armarego, E. and Deshpande, N., 1991, Computerized End Milling Force Predictions with Cutting Models Allowing Eccentricity and Cutter Deflections, Annals of the CIRP, 40/1: 25-29.
103. Altintas, Y. and Chan, P., 1992, In-Process Detection and Suppression of Chatter in Milling, International Journal of Machine Tools and Manufacture, 32/3: 329-47.
104. Liang, S. andWang, J., 1994, Milling Force ConvolutionModeling for Identification of Cutter Axis Offset, International Journal ofMachine Tools andManufacture, 34/8: 1177-1190.
105. Feng, H.-Y. and Menq, C.-H., 1994, The Prediction of Cutting Forces in the Ball-End Milling Process - I. Model Formulation and Model Building Procedure, International Journal of Machine Tools and Manufacture, 34/5: 697-710.
106. Feng, H.-Y. and Menq, C.-H., 1994, The Prediction of Cutting Forces in the Ball-End Milling Process - II. Cut Geometry Analysis and Model Verification, International Journal of Machine Tools and Manufacture, 34/5: 711-719.
107. Yan, D., El-Wardany, T., and Elbestawi, M., 1995, A Multi-Sensor Strategy for Tool Failure Detection in Milling, International Journal of Machine Tools and Manufacture, 35/3: 383-398.
108. Stevens, A. and Liang, S., 1995, Runout Rejection in End Milling through Two-Dimensional Repetitive Force Control, Mechatronics, 5/1: 1-13.
109. Hekman, K. and Liang, S., 1997, In-Process Monitoring of End Milling Cutter Runout, Mechatronics, 7/1: 1-10.
110. Baek, D., Ko, T., and Kim, H., 1997, A Dynamic Surface Roughness Model for Face Milling, Precision Engineering, 20/3: 171-178.
111. Zheng, H., Li, X., Wong, Y., and Nee, A., 1999, Theoretical Modeling and Simulation of Cutting Forces in Face Milling with Cutter Runout, International Journal of Machine Tools and Manufacture, 39/12: 2003-2018.
112. Yun, W.-S. and Cho, D.-W., 2001, Accurate 3-D Cutting Force Prediction using Cutting Condition Independent Coefficients in End Milling, International Journal of Machine Tools and Manufacture, 41/4: 463-478.
113. Baek, D., Ko, T., and Kim, H., 2001, Optimization of Feedrate in a Face Milling Operation using a Surface Roughness Model, International Journal of Machine Tools and Manufacture, 41/3: 451-462.
114. Mezentsev, O., Zhu, R., DeVor, R., Kapoor S., and Kline, W., 2002, Use of Radial Forces for Fault Detection in Tapping, International Journal of Machine Tools and Manufacture, 42/4: 479-488.
115. Ko, J., Yun, W.-S., Cho, D.-W., and Ehmann, K.F., 2002, Development of a Virtual Machining System, Part 1: Approximation of the Size Effect for Cutting Force Prediction, International Journal of Machine Tools and Manufacture, 42/15: 1595-1605.
116. Ranganath, S. and Sutherland, J., 2002, An Improved Method for Cutter Runout Modeling in the Peripheral Milling Process, Machining Science and Technology, 6/1: 1-20.
117. Wang, J.-J. and Zheng, C., 2003, Identification of Cutter Offset in End Milling without a Prior Knowledge of Cutting Coefficients, International Journal of Machine Tools and Manufacture, 43/7: 687-697.
118. Lazoglu, I., 2003, Sculpture Surface Machining: A Generalized Model of Ball-End Milling Force System, International Journal of Machine Tools and Manufacture, 43/5: 453-462.
119. Atabey, F., Lazoglu, I., and Altintas, Y., 2003, Mechanics of Boring Processes - Part II. Multi-Insert Boring Heads, International Journal of Machine Tools and Manufacture, 43/5: 477-484.
120. Slavicek, J., 1965, The effect of Irregular Tooth Pitch on Stability of Milling, Proceedings of the 6th Machine Tool Design and Research Conference, Pergamon Press, London, pp. 15-22.
121. Vanherck, P., 1967, Increasing Milling Machine Productivity by Use of Cutter with Non-Constant Edge Pitch, Proceedings of the 8th Machine Tool Design and Research Conference, pp. 947-960.
122. Doolan, P., Phadke, M.S., and Wu, S., 1975, Computer Design of Vibration Free Face Milling Cutters, Journal of Engineering for Industry, 97B/3: 925-930.
123. Doolan, P., Burney, F., and Wu, S., 1976, Computer Design of a Multi-purpose Minimum Vibration Face Milling Cutter, International Journal of Machine Tool Design and Research, 16/3: 187-192.
124. Tlusty, J., Ismail, F., and Zaton W., 1983, Use of Special Milling Cutters Against Chatter, Transactions of the NAMRI/SME, 11: 408-415.
125. Shirase, K. and Altintas, Y., 1995, Cutting Force and Dimensional Surface Error Generation in Peripheral Milling with Variable Pitch Helical End Mills, International Journal of Machine Tools and Manufacture, 36/5: 567-584.
126. Choudhurya, S. and Mathew, J., 1995, Investigations of the Effect of Non-uniform Insert Pitch on Vibration during Face Milling, International Journal of Machine Tools and Manufacture, 35/10: 1435-1444.
127. Altintas, Y, Engin, S., and Budak, E., 1999, Analytical Stability Prediction and Design of Variable Pitch Cutters, Journal of Manufacturing Science and Engineering, 121: 173-178.
128. Budak, E., 2003, An Analytical Design Method for Milling Cutters with Nonconstant Pitch to Increase Stability, Part 1: Theory, Part 2: Application, Journal of Manufacturing Science and Engineering, 123: 29-38.
129. Stone, B., 1970, The Effect on the Chatter Behavior of Cutters With Different Helix Angles on Adjacent Teeth, Proceedings of the 11th International Machine Tool Design and Research Conference, pp. 169-180.
130. Davies, M., Pratt, J., Dutterer, B., and Burns, T., 2000, The Stability of Low Radial Immersion Milling, Annals of the CIRP 49/1: 37-40.
131. Davies, M., Pratt, J., Dutterer, B., and Burns, T., 2002, Stability Prediction for Low Radial Immersion Milling, Journal of Manufacturing Science and Engineering, 124/2: 217-225.
132. Insperger, T., Mann, B., Stépàn, G., and Bayly, P., 2003, Stability of Up-milling and Down-milling, Part 1: Alternative Analytical Methods, International Journal of Machine Tools and Manufacture, 43/1: 25-34.
133. Mann, B., Insperger, T., Bayly, P., and Stépàn, G., 2003, Stability of Up-milling and Down-milling, Part 2: Experimental Verification, International Journal of Machine Tools and Manufacture, 43/1: 35-40.
134. Campomanes, M. and Altintas, Y., 2003, An Improved Time Domain Simulation for Dynamic Milling at Small Radial Immersions, Journal of Manufacturing Science and Engineering, 125/3: 416-422.
135. Merdol, S. and Altintas, Y., 2004, Multi Frequency Solution of Chatter Stability for Low Immersion Milling, Journal of Manufacturing Science and Engineering, 126/3: 459-466.
136. Bayly, P., Halley, J., Mann, B., and Davies, M., 2004, Stability of Interrupted Cutting by Temporal Finite Element Analysis, Journal of Manufacturing Science and Engineering, 125/2: 220-225.
137. Mann, B., Bayly, P, Davies, M., and Halley, J., 2004, Limit Cycles, Bifurcations, and Accuracy of the Milling Process, Journal of Sound and Vibration, 277/1-2: 31-48.
138. Govekar, E., Gradišek, J., Kalveram, M., Insperger, T., Weinert, K., Stépàn, G., and Grabec, I., 2005, On Stability and Dynamics of Milling at Small Radial Immersion, Annals of the CIRP, 54/1: 357-362.
139. Taylor, B. and Kuyatt, C., 1994, Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results, NIST Technical Note 1297 1994 Edition.
140. International Standards Organization (ISO), 1993, Guide to the Expression of Uncertainty in Measurement (Corrected and Reprinted 1995).
141. American National Standards Institute, 1997, ANSI/NCSL Z540-2-1997, US Guide to the Expression of Uncertainty in Measurement.
142. Bevington, P. and Robinson, D., 1992, Data Reduction and Error Analysis for the Physical Sciences, 2nd Edition, WCB/McGraw-Hill, Boston, M.A.
143. Altintas, Y. and Budak, E., 1995, Analytical Prediction of Stability Lobes in Milling, Annals of the CIRP, 44/1: 357-362.
144. Duncan, G.S., Kurdi, M., Schmitz, T., and Snyder, J., 2006, Uncertainty Propagation for Selected Analytical Milling Stability Limit Analyses, Transactions of the NAMRI/SME, 34: 17-24.
145. Weisstein, E., "Incommensurate" from MathWorld - A Wolfram Web Resource, http://mathworld.wolfram.com/Incommensurate.html, accessed May, 2008.
146. Weisstein, E., "Bifurcation" from MathWorld - A Wolfram Web Resource, http://mathworld.wolfram.com/Bifurcation.html, accessed May, 2008.