Real-time identification of incipient surface morphology variations in ultraprecision machining process

Journal of Manufacturing Science and Engineering

Volumn 136, Issue 2, 2014, Pages

  Rao, Prahalad ^a   Bukkapatnam, Satish ^b   Beyca, Omer ^b   Kong, Zhenyu ^a   Komanduri, Ranga ^b  

^a State University   (United States)

^b Oklahoma State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACOUSTIC EMISSION TESTING; ALUMINUM ALLOYS; BAYESIAN NETWORKS; DYNAMICS; MACHINE TOOLS; PATTERN RECOGNITION; PROCESS MONITORING; RECURRENT NEURAL NETWORKS; STATISTICAL PROCESS CONTROL; SURFACE MORPHOLOGY; TURNING;

ACOUSTIC EMISSION SENSORS; EXPERIMENTAL INVESTIGATIONS; REAL-TIME IDENTIFICATION; STATISTICAL CHANGE DETECTIONS; STATISTICAL PROCESS MONITORING; SURFACE CHARACTERISTICS; ULTRA-PRECISION DIAMOND TURNINGS; ULTRAPRECISION MACHINING;

MORPHOLOGY;

EID: 84892740082     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.4026210     Document Type: Article

References (46)

1. Taniguchi, N., 1983, "Current Status in, and Future Trends of, Ultraprecision Machining and Ultrafine Materials Processing," CIRP Ann., 32(2), pp. 573-582. (Pubitemid 14520341)
2. Ikawa, N., Donaldson, R., Komanduri, R., Konig, W., Mckeown, P., Moriwaki, T., and Stowers, I., 1991, "Ultraprecision Metal Cutting - The Past, the Present and the Future," CIRP Ann., 40(2), pp. 587-594.
3. Dornfeld, D., Min, S., and Takeuchi, Y., 2006, "Recent Advances in Mechanical Micromachining," CIRP Ann., 55(2), pp. 745-768. (Pubitemid 46148815)
4. Ikawa, N., 1992, "Minimum Thickness of Cut in Micromachining," Nanotechnology, 3(1), p. 6.
5. Takasu, S., Masuda, M., Nishiguchi, T., and Kobayashi, A., 1985, "Influence of Study Vibration With Small Amplitude Upon Surface Roughness in Diamond Machining," CIRP Ann., 34(1), pp. 463-467. (Pubitemid 15577274)
6. Moriwaki, T., 1990, "Effect of Cutting Heat on Machining Accuracy in Ultra- Precision Diamond Turning," CIRP Ann., 39(1), pp. 81-84.
7. Liu, X., Devor, R. E., Kapoor, S. G., and Ehmann, K. F., 2004, "The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science," ASME J. Manuf. Sci. Eng., 126(4), pp. 666-678. (Pubitemid 40329873)
8. Jasinevicius, R. G., Duduch, J. G., Montanari, L., and Pizani, P. S., 2008, "Phase Transformation and Residual Stress Probed by Raman Spectroscopy in Diamond-Turned Single Crystal Silicon," Proc. Inst. Mech. Eng., Part B, 222(9), pp. 1065-1073.
9. Teti, R., Jemielniak, K., O'donnell, G., and Dornfeld, D., 2010, "Advanced Monitoring of Machining Operations," CIRP Ann., 59(2), pp. 717-739.
10. Cheung, C., and Lee, W., 2000, "Modelling and Simulation of Surface Topography in Ultra-Precision Diamond Turning," Proc. Inst. Mech. Eng., Part B, 214(6), pp. 463-480.
11. Cheung, C. F., and Lee, W., 2003, Surface Generation in Ultra-Precision Diamond Turning: Modelling and Practices, Engineering Research Series, Professional Engineering Publishing Limited, Suffolk, UK.
12. Abouelatta, O., and Madl, J., 2001, "Surface Roughness Prediction Based on Cutting Parameters and Tool Vibrations in Turning Operations," J. Mater. Process. Technol., 118(1-3), pp. 269-277. (Pubitemid 33147998)
13. Beggan, C., Woulfe, M., Young, P., and Byrne, G., 1999, "Using Acoustic Emission to Predict Surface Quality," Int. J. Adv. Manuf. Technol., 15(10), pp. 737-742. (Pubitemid 30506220)
14. Hayashi, M., Yoshioka, H., and Shinno, H., 2008, "An Adaptive Control of Ultraprecision Machining With an In-Process Micro-Sensor," J. Adv. Mech. Des., Syst., Manuf., 2(3), pp. 322-331.
15. Yoshioka, H., Matsumura, S., Hashizume, H., and Shinno, H., 2006, "Minimizing Thermal Deformation of Aerostatic Spindle System by Temperature Control of Supply Air," JSME Int. J., Ser. C, 49(2), pp. 606-611. (Pubitemid 44942139)
16. Shinno, H., Hashizume, H., and Sato, H., 1997, "In-Process Monitoring Method for Machining Environment Based on Simultaneous Multiphenomena Sensing," CIRP Ann., 46(1), pp. 53-56.
17. Lee, W. B., Cheung, C. F., and To, S., 2001, "Characteristics of Microcutting Force Variation in Ultraprecision Diamond Turning," Mater. Manuf. Processes, 16(2), pp. 177-193. (Pubitemid 32732433)
18. Marsh, E. R., and Schaut, A. J., 1998, "Measurement and Simulation of Regenerative Chatter in Diamond Turning," Precis. Eng., 22(4), pp. 252-257.
19. Jain, L. C., and Medsker, L. R., 2000, Recurrent Neural Networks: Design and Applications, CRC Press, Boca Raton, FL.
20. Han, M., Xi, J., Xu, S., and Yin, F. L., 2004, "Prediction of Chaotic Time Series Based on the Recurrent Predictor Neural Network," IEEE Trans. Signal Process., 52(12), pp. 3409-3416.
21. Doucet, A., De Freitas, N., and Gordon, N., 2001, Sequential Monte Carlo Methods in Practice, Springer Verlag, New York.
22. Moriwaki, T., and Okuda, K., 1989, "Machinability of Copper in Ultra- Precision Micro Diamond Cutting," CIRP Ann., 38(1), pp. 115-118.
23. Lucca, D., Rohrer, R. L., and Komanduri, R., 1991, "Energy Dissipation in the Ultraprecision Machining of Copper," CIRP Ann., 40(1), pp. 69-72. (Pubitemid 21681437)
24. Prager, W., 1955, "The Theory of Plasticity: A Survey of Recent Achievements," Proc. Inst. Mech. Eng., 169(1955), pp. 41-57.
25. Kong, M., Lee, W., Cheung, C., and To, S., 2006, "A Study of Materials Swelling and Recovery in Single-Point Diamond Turning of Ductile Materials," J. Mater. Process. Technol., 180(1-3), pp. 210-215. (Pubitemid 44301855)
26. Lee, D. E., Hwang, I., Valente, C. M. O., Oliveira, J. F. G., and Dornfeld, D. A., 2006, "Precision Manufacturing Process Monitoring With Acoustic Emission," Int. J. Mach. Tools Manuf., 46(2), pp. 176-188. (Pubitemid 41563982)
27. Cheung, C. F., and Lee, W. B., 2001, "A Framework of a Virtual Machining and Inspection System for Diamond Turning of Precision Optics," J. Mater. Process. Technol., 119(1-3), pp. 27-40. (Pubitemid 34108871)
28. Chan, K. C., Cheung, C. F., Ramesh, M. V., Lee, W. B., and To, S., 2001, "A Theoretical and Experimental Investigation of Surface Generation in Diamond Turning of an Al6061/Sicp Metal Matrix Composite," Int. J. Mech. Sci., 43(9), pp. 2047-2068. (Pubitemid 32742712)
29. Hocheng, H., and Hsieh, M. L., 2004, "Signal Analysis of Surface Roughness in Diamond Turning of Lens Molds," Int. J. Mach. Tools Manuf., 44(15), pp. 1607-1618.
30. Bukkapatnam, S. T. S., Lakhtakia, A., and Kumara, S. R. T., 1995, "Analysis of Sensor Signals Shows Turning on a Lathe Exhibits Low-Dimensional Chaos," Phys. Rev. E, 52(3), pp. 2375-2387.
31. Hamilton, J. D., 1994, Time Series Analysis, Princeton University Press, Princeton, NJ.
32. Dahlgren, R., and Gerchman, M. C., 1987, "The Use of Aluminum Alloy Castings as Diamond Machining Substrates," retrieved on Nov. 9, 2011, http://www.precitech.com/pressroom/The%20Use%20of%20Aluminum%20Alloy%20 Castings%20as%20Diamond%20Machining%20Substrates.pdf
33. Li, L., Collins, J. S. A., and Yi, A. Y., 2010, "Optical Effects of Surface Finish by Ultraprecision Single Point Diamond Machining," ASME J. Manuf. Sci. Eng., 132(2), p. 021002.
34. Cheung, C. F., Chan, K. C., To, S., and Lee, W. B., 2002, "Effect of Reinforcement in Ultra-Precision Machining of Al6061/Sic Metal Matrix Composites," Scr. Mater., 47(2), pp. 77-82. (Pubitemid 34771973)
35. Wang, H., To, S., Chan, C. Y., Cheung, C. F., and Lee, W. B., 2010, "A Theoretical and Experimental Investigation of the Tool-Tip Vibration and Its Influence Upon Surface Generation in Single-Point Diamond Turning," Int. J. Mach. Tools Manuf., 50(3), pp. 241-252.
36. Roblee, J., "Factors Affecting Surface Finish in Diamond Turning," retrieved on Nov. 9, 2011, http://www.precitech.com/pressroom/ FactorsAffectingSurfFinish. pdf
37. Paul, E., Evans, C. J., Mangamelli, A., Mcglauflin, M. L., and Polvani, R. S., 1996, "Chemical Aspects of Tool Wear in Single Point Diamond Turning," Precis. Eng., 18(1), pp. 4-19. (Pubitemid 126400349)
38. Aguirre, L. A., and Billings, S., 1995, "Retrieving Dynamical Invariants From Chaotic Data Using Narmax Models," Int. J. Bifurcation Chaos, 5(2), pp. 449-474.
39. Hagan, M. T., Demuth, H. B., and Beale, M., 1997, Neural Network Design, PWS Publishing, Boston, MA.
40. Dejesus, O., and Hagan, M. T., eds., 2001, Backpropagation Through Time for a General Class of Recurrent Network, Washington, DC, pp. 2638-2642.
41. Kong, Z., Oztekin, A., Beyca, O. F., Phatak, U., Bukkapatnam, S. T. S., and Komanduri, R., 2010, "Process Performance Prediction for Chemical Mechanical Planarization (CMP) by Integration of Nonlinear Bayesian Analysis and Statistical Modeling," IEEE Trans. Semicond. Manuf., 23(2), pp. 316-327.
42. Comaniciu, D., and Meer, P., 2002, "Mean Shift: A Robust Approach Toward Feature Space Analysis," IEEE Trans. Pattern Anal. Mach. Intell., 24(5), pp. 603-619. (Pubitemid 34550429)
43. Shaw, M. C., 1942, "The Chemico-Physical Role of the Cutting Fluid," Metal Progress, 42, pp. 85-91.
44. Brinksmeier, E., Lucca, D. A., and Walter, A., 2004, "Chemical Aspects of Machining Processes," CIRP Ann., 53(2), pp. 685-699. (Pubitemid 40118862)
45. Burns, T. J., and Davies, M. A., 1997, "Nonlinear Dynamics Model for Chip Segmentation in Machining," Phys. Rev. Lett., 79(3), pp. 447-450. (Pubitemid 127653644)
46. Kantz, H., and Schreiber, T., 1997, Nonlinear Time Series Analysis, Cambridge University Press, Cambridge, UK.