Assessing asphalt mixture moisture susceptibility through intrinsic adhesion, bitumen stripping and mechanical damage

Road Materials and Pavement Design

Volumn 15, Issue 1, 2014, Pages 131-152

  Grenfell, James ^a   Ahmad, Naveed ^b   Liu, Yawen ^a   Apeagyei, Alex ^a   Large, David ^a   Airey, Gordon ^a  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

^b UNIVERSITY OF ENGINEERING AND TECHNOLOGY   (Pakistan)

Author keywords

adhesion; asphalt mixtures; bitumen; mineralogical composition; moisture damage; rolling bottle test; SATS; surface energy

Indexed keywords

BITUMEN; DYNAMIC CONTACT ANGLE; DYNAMIC VAPOUR SORPTIONS; MINERALOGICAL COMPOSITIONS; MOISTURE DAMAGE; MOISTURE SUSCEPTIBILITY; SATS; SURFACE ENERGY PROPERTIES;

ADHESION; AGGREGATES; ASPHALT MIXTURES; BITUMINOUS MATERIALS; DURABILITY; INSTRUMENTS; INTERFACIAL ENERGY; MIXTURES; MOISTURE;

BOTTLES;

EID: 84892545751     PISSN: 14680629     EISSN: 21647402     Source Type: Journal    
DOI: 10.1080/14680629.2013.863162     Document Type: Article

References (35)

1. Airey, G. D., & Choi, Y. K. (2006). State of the art report on moisture sensitivity test methods for bituminous pavement materials. Road Materials and Pavement Design, 3(4), 355-372.
2. Airey, G. D., Choi, Y., Collop, A. C., & Elliott, R. C. (2003). Development of an accelerated durability assessment procedure for high modulus base (HMB) materials. 6th International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials, PTEBM'03, Zurich, Switzerland.
3. Airey, G. D., Choi, Y., Collop, A. C., Moore, A. J. V., & Elliott, R. C. (2006). Combined laboratory ageing/moisture sensitivity assessment of high modulus base asphalt mixtures. Proceedings of the Association of Asphalt Paving Technologists, 74, 307-346.
4. Airey, G. D., Masad, E. A., Bhasin, A., Caro, S., & Little, D. N. (2007). Asphalt mixture moisture damage assessment combined with surface energy characterization. Proceedings of the international conference on Advanced Characterisation of Pavement and Soil Engineering Materials, Vol. 1, 739-748, Athens.
5. Annual Local Authority Road Maintenance (ALARM) Survey. (2006). Asphalt Industry Alliance. Retrieved from http://www.asphaltindustryalliance.com/alarm.asp
6. Anon. (2000). Resistance of compacted bituminous mixtures to moisture induced damage. AASHTO T283-99. Washington, DC: American Association of State Highways and Transportation Officials.
7. Bhasin, A. (2006). Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water (PhD dissertation). Texas A&M University, College Station, Texas, USA.
8. Bhasin, A., & Little, D. (2007). Charactization of aggregate surface energy using the universal sorption device. Journal of Materials in Civil Engineering, 19, 634-641. doi: 10.1061/(ASCE)0899-1561(2007)19:8(634)
9. Bhasin, A., Masad, E., Little, D., & Lytton, R. (2006). Limits on adhesive bond energy for improved resistance of hot-mix asphalt to moisture damage. Transportation Research Record: Journal of the Transportation Research Board, 1970, 3-13. doi: 10.3141/1970-03
10. Birgisson, B., Roque, R., Tia, M., & Masad, E. (2005). Development and evaluation of test methods to evaluate water damage and effectiveness of anti-stripping agents. Project Number 4910-4504-722-12 from Florida Department of Transportation, Florida.
11. Cheng, D. (2002). Surface free energy of asphalt aggregate system and performance analysis of asphalt concrete based on surface free energy (PhD dissertation). Texas A&M University, College Station, Texas, USA.
12. Cheng, D., Little, D. N., Lytton, R. L., & Holste, J. C. (2002a). Surface energy measurement of asphalt and its application to predicting fatigue and healing in asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1810, 44-53. doi: 10.3141/1810-06
13. Cheng, D., Little, D. N., Lytton, R. L., & Holste, J. C., (2002b). Moisture damage evaluation of asphalt mixtures by considering both moisture diffusion and repeated-load conditions. Transportation Research Record: Journal of the Transportation Research Board, 1832, 42-49. doi: 10.3141/1832-06
14. Choi, Y. C. (2005). Development of the saturation ageing tensile stiffness (SATS) test for high modulus base materials (PhD thesis). School of Civil Engineering, University of Nottingham, Nottingham, UK.
15. Choi, Y. K., Collop, A. C., Airey, G. D., Elliott, R. C., Williams, J., & Heslop, M. W. (2002). Assessment of the durability of high modulus base (HMB) materials. 6th International conference on the bearing capacity of roads, railways and airfields, Lisbon, Portugal.
16. Collop, A. C., Choi, Y. K., Airey, G. D., & Elliott, R. C. (2004a). Development of the saturation ageing tensile stiffness (SATS) test. Proceedings of the ICE Transport, 157, 163-171. doi: 10.1680/tran.2004.157.3.163
17. Collop, A. C., Choi, Y. K., & Airey, G. D. (2004b). Development of a combined ageing/moisture sensitivity laboratory test. Euroasphalt and Eurobitume Congress, Vienna, Austria.
18. Emery, J., & Seddik, H. (1997). Moisture-damage of asphalt pavements and antistripping additives: Causes, identification, testing and mitigation. Ottawa: Transportation Association of Canada.
19. Erbil, H. Y. (2006). Surface chemistry of solid and liquid interfaces. Oxford, UK: Blackwell Publishing Ltd.
20. Fowkes, F. M. (1962). Determination of interfacial tensions, contact angles, and dispersion forces in surfaces by assuming additivity of intermolecular interactions in surfaces. Journal of Physical Chemistry, 66, 382.
21. Good, R. J. (1992). Contact angle, wetting, and adhesion: A critical review. Journal of Adhesion Science and Technology, 6, 1269-1302. doi: 10.1163/156856192X00629
22. Good, R. J., & van Oss, C. J. (1991). The modern theory of contact angles and the hydrogen bond components of surface energies, modern approach to wettability: Theory and application. New York, NY: Plenum Press.
23. Grenfell, J., Ahmad, N., Airey, G., Collop, A., & Elliott, R. (2012). Optimising the moisture durability SATS conditioning parameters for universal asphalt mixture application. International Journal of Pavement Engineering, 13(5), 433-450. doi: 10.1080/10298436.2012.655740
24. Grenfell, J. R. A., Ahmad, N., Liu, Y., Apeagyei, A. K., Airey, G. D., & Large, D. (in press). Application of surface free energy techniques to evaluate bitumen aggregate bonding strength and asphalt mixture moisture sensitivity. Proceedings of the Institution of Civil Engineers: Construction Materials.
25. Hefer, A. W., Bhasin, A., & Little, D. N. (2006). Bitumen surface energy characterization using a contact angle approach. Journal of Materials in Civil Engineering, 18, 759-767. doi: 10.1061/(ASCE)0899-1561(2006)18:6(759)
26. Horgnies, M., Darque-Ceretti, E., Fezai, H., & Felder, E. (2011). Influence of the interfacial composition on the adhesion between aggregates and bitumen: Investigations by EDX, XPS and peel tests. International Journal of Adhesion and Adhesives, 31(5), 238-247. doi: 10.1016/j.ijadhadh.2011.01.005
27. Kandhal, P. S. (1994). Field and laboratory evaluation of stripping in asphalt pavements: State of the art. Transportation Research Record: Journal of the Transportation Research Board, TRR 1454, TRB, Washington, DC, 36-47.
28. Kim, Y. R. (2009). Modelling of asphalt concrete (1st ed.). New York, NY: ASCE Press USA, McGraw-Hill Construction.
29. Manual Series No. 24 (MS-24). (2007). Moisture sensitivity: Best practices to minimize moisture sensitivity in asphalt mixtures. Lexington, KY: Asphalt Institute.
30. Maugis, D. (1999). Contact, adhesion and rupture of elastic solids (pp. 3-12). New York, NY: Springer.
31. Miller, J. S., & Bellinger, W. Y. (2003). Distress identification manual for the long-term pavement performance program. Publication FHWA-RD-03-031, FHWA, Office of Infrastructure Research and Development, McLean, VA.
32. Shaw, D. J. (1991). Introduction to colloid and surface chemistry (4th ed.). Oxford: Butterworth-Heinemann.
33. Sing, K. S. W. (1969). Utilisation of adsorption data in the BET region. Proceedings; International Symposium on Surface area Determination, Bristol, UK.
34. Solaimanian, M., Harvey, J., Tahmoressi, M., & Tandon, V. (2003). Test methods to predict moisture sensitivity of hot mix asphalt pavements. Proceedings National Seminar on Moisture Sensitivity of Asphalt Pavements, San Diego, CA.
35. Terrel R. L., & Al-Swailmi S. (1994). Water sensitivity of asphalt-aggregate mixes: Test selection. SHRP-A-403, strategic highway research program. Washington, DC: National Research Council.