An experimental and numerical investigation of different shear test configurations for sheet metal characterization

International Journal of Solids and Structures

Volumn 51, Issue 5, 2014, Pages 1066-1074

  Yin, Qing ^a   Zillmann, Benjamin ^b   Suttner, Sebastian ^c   Gerstein, Gregory ^d   Biasutti, Manfredi ^c   Tekkaya, A Erman ^a   Wagner, Martin F X ^b   Merklein, Marion ^c   Schaper, Mirko ^e   Halle, Thorsten ^f   Brosius, Alexander ^g  

^a TU DORTMUND UNIVERSITY   (Germany)

^b CHEMNITZ UNIVERSITY OF TECHNOLOGY   (Germany)

^c UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

^d LEIBNIZ UNIVERSITY HANNOVER   (Germany)

^e UNIVERSITY OF PADERBORN   (Germany)

^f OTTO VON GUERICKE UNIVERSITY   (Germany)

^g DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Heterogeneity; Sheet metal; Simple shear

Indexed keywords

DIGITAL IMAGE CORRELATIONS; FINITE ELEMENT SIMULATIONS; HETEROGENEITY; MACROSCOPIC FLOW STRESS; MATERIAL CHARACTERIZATIONS; METAL CHARACTERIZATIONS; NUMERICAL INVESTIGATIONS; SIMPLE SHEAR;

CHARACTERIZATION; FINITE ELEMENT METHOD; GEOMETRY; SHEET METAL; STRAIN MEASUREMENT; STRESS CONCENTRATION;

SHEAR FLOW;

EID: 84892435456     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2013.12.006     Document Type: Article

References (31)

1. Y.G. An, H. Vegter, and J. Heijne Development of simple shear test for the measurement of work hardening J. Mater. Process. Technol. 209 2009 4248 4254
2. ASTM, PA. ASTM D5379/ D5379M-05 Standard test method for shear properties of composite materials by the V-notched beam method, West Conshohocken.
3. ASTM, 2005. Test method for shear testing of thin aluminum alloy products. ASTM Int.
4. D.H. Bae, and A.K. Ghosh A planar simple shear test and flow behavior in a superplastic Al-Mg alloy Metall. Mater. Trans. A 34 2003 2465 2471
5. D. Banabic Sheet Metal Forming Processes 2010 Springer
6. F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.H. Choi, and E. Chu Plane stress yield function for aluminum alloy sheets-part 1: theory Int. J. Plast. 19 2003 1297 1319
7. Bauer, M.; 1989. Ermittlung der Fliesskurven von Feinblechen im ebenen Torsionsversuch (Dissertation). University of Stuttgart.
8. S. Bouvier, H. Haddadi, P. Levée, and C. Teodosiu Simple shear tests: experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains J. Mater. Process. Technol. 172 2006 96 103
9. A. Brosius, Q. Yin, A. Güner, and A.E. Tekkaya A new shear test for sheet metal characterization Steel Res. Int. 82 2011 323 328
10. J. Cao, W. Lee, H.S. Cheng, M. Seniw, H.P. Wang, and K. Chung Experimental and numerical investigation of combined isotropic-kinematic hardening behavior of sheet metals Int. J. Plast. 25 2009 942 972
11. T. Clausmeyer, G. Gerstein, S. Bargmann, B. Svendsen, A.H. van den Boogaard, and B. Zillmann Experimental characterization of microstructure development during loading path changes in bcc sheet steels J. Mater. Sci. 48 2012 674 689
12. C. G'Sell, S. Boni, and S. Shrivastava Application of the plane simple shear test for determination of the plastic behaviour of solid polymers at large strains J. Mater. Sci. 18 1983 903 918
13. A. Hannon, and P. Tiernan A review of planar biaxial tensile test systems for sheet metal J. Mater. Process. Technol. 198 2008 1 13
14. N. Iosipescu New accurate procedure for single shear testing of metals J. Mater. 2 1967 537 566
15. J. Kang, D.S. Wilkinson, P.D. Wu, M. Bruhis, M. Jain, J.D. Embury, and R.K. Mishra Constitutive behavior of AA5754 sheet materials at large strains J. Eng. Mater. Technol. 130 2008
16. Z. Marciniak Influence of the sign change of the load on the strain hardening curve of a copper test subject to torsion Arch. Mech. Stosowanj 13 1961 743 751
17. Merklein, M.; Biasutti, M.; 2011. Forward and reverse simple shear test experiments for material modeling in forming simulations. In: Hirt, G.; Tekkaya, A.E. (Eds.), International Conference on Technology of Plasticity, Aachen. pp. 702-707.
18. M. Merklein, and A. Kuppert A method for the layer compression test considering the anisotropic material behavior Int. J. Mater. Form. 2 2009 483 486
19. K. Miyauchi A proposal of a planar simple shear test in sheet metals Sci. Pap. Inst. Phys. Chem. Res. (Jpn.) 78 1984 27 40
20. Panknin, W.; 1959. Der hydraulische Tiefungsversuch und die Ermittlung von Fliekurven (Dissertation). University of Stuttgart.
21. K. Pöhlandt, and A.E. Tekkaya Torsion testing - plastic deformation to high strains and strain rates Mater. Sci. Technol. 1 1985 972 977
22. E.F. Rauch The flow law of mild steel under monotonic or complex strain path Solid State Phenom. 23-24 1992 317 333
23. E.F. Rauch Plastic anisotropy of sheet metals determined by simple shear tests Mater. Sci. Eng. A 241 1998 179 183
24. E.F. Rauch, and C. G'Sell Flow localization induced by a change in strain path in mild steel Mater. Sci. Eng. A 111 1989 71 80
25. D.R. Shouler, and J.M. Allwood Design and use of a novel sample design for formability testing in pure shear J. Mater. Process. Technol. 210 2010 1304 1313
26. D. Staud, and M. Merklein M. Borsutzki, S. Geisler, Zug-Druck-Versuche an Miniaturproben zur Erfassung von Parametern für kinematische Verfestigungsmodelle 2009 Tagungsband Werkstoffprüfung Düsseldorf 211 218
27. M. van Riel, and A.H. van den Boogaard Stress-strain responses for continuous orthogonal strain path changes with increasing sharpness Scr. Mater. 57 2007 381 384
28. Yin, Q.; Brosius, A.; Tekkaya, A.E.; 2011. Modified plane torsion tests for sheet metal characterization. In: Hirt, G.; Tekkaya, A.E. (Eds.), International Conference on Technology of Plasticity, Aachen. pp. 696-701.
29. Q. Yin, C. Soyarslan, A. Güner, A. Brosius, and A.E. Tekkaya A cyclic twin bridge shear test for the identification of kinematic hardening parameters Int. J. Mech. Sci. 59 2012 31 43
30. Zillmann, B.; Härtel, M.; Halle, T.; Lampke, T.; Wagner, M.F.-X.; 2011. Automotive aluminum sheets during in-plane uniaxial and biaxial compression loading. In: Hirt, G.; Tekkaya, A.E. (Eds.), International Conference on Technology of Plasticity, Aachen. pp. 691-695.
31. B. Zillmann, T. Clausmeyer, S. Bargmann, T. Lampke, T. Halle, and M.F.-X. Wagner Validation of simple shear tests for parameter identification considering the evolution of plastic anisotropy Tech. Mech. 32 2012 622 630