Primary implant stability in the atrophic sinus floor of human cadaver maxillae: Impact of residual ridge height, bone density, and implant diameter

Clinical Oral Implants Research

Volumn 25, Issue 2, 2014, Pages

  Pommer, Bernhard ^a   Hof, Markus ^a   Fädler, Andrea ^a   Gahleitner, André ^a   Watzek, Georg ^a   Watzak, Georg ^a  

^a MEDICAL UNIVERSITY OF VIENNA   (Austria)

Author keywords

Atrophic maxilla; Implant site preparation; Insertion torque; One stage surgery; Quantitative computed tomography; Sinus floor augmentation

Indexed keywords

TOOTH IMPLANT;

AGED; BONE DENSITY; CADAVER; COMPUTER ASSISTED TOMOGRAPHY; DENTAL SURGERY; FEMALE; HUMAN; JAW; MALE; MAXILLA; PATHOLOGY; PHYSIOLOGY; PROCEDURES; RADIOGRAPHY; SINUS FLOOR AUGMENTATION; SURGERY; TOOTH IMPLANT; TOOTH IMPLANTATION; TORQUE; TREATMENT OUTCOME; VERY ELDERLY; WOUND HEALING;

AGED; AGED, 80 AND OVER; ALVEOLAR PROCESS; BONE DENSITY; CADAVER; DENTAL IMPLANTATION, ENDOSSEOUS; DENTAL IMPLANTS; DENTAL RESTORATION FAILURE; FEMALE; HUMANS; MALE; MAXILLA; SINUS FLOOR AUGMENTATION; TOMOGRAPHY, X-RAY COMPUTED; TORQUE; TREATMENT OUTCOME; WOUND HEALING;

EID: 84892366813     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/clr.12071     Document Type: Article

References (37)

1. Akça, K., Chang, T.L., Tekdemir, I. & Fanuscu, M.I. (2006) Biomechanical aspects of initial intraosseous stability and implant design: a quantitative micro-morphometric analysis. Clinical Oral Implants Research 17: 465-472.
2. Bruschi, G.B., Crespi, R., Capparè, P., Bravi, F., Bruschi, E. & Gherlone, E. (2011) Localized Management of Sinus Floor Technique for Implant Placement in Fresh Molar Sockets. Clinical Implant Dentistry and Related Research, doi: 10.1111/j.1708-8208.2011.00348.x.
3. Degidi, M., Daprile, G., Piattelli, A. & Carinci, F. (2007) Evaluation of factors influencing resonance frequency analysis values, at insertion surgery, of implants placed in sinus-augmented and nongrafted sites. Clinical Implant Dentistry & Related Research 9: 144-149.
4. Del Fabbro, M., Bortolin, M., Taschieri, S. & Weinstein, R.L. (2011) Effect of Autologous Growth Factors in Maxillary Sinus Augmentation: A Systematic Review. Clinical Implant Dentistry & Related Research, doi: 10.1111/j.1708-8208.2011.00343.x.
5. Engelke, W. & Capobianco, M. (2005) Flapless sinus floor augmentation using endoscopy combined with CT scan-designed surgical templates: method and report of 6 consecutive cases. The International Journal of Oral & Maxillofacial Implants 20: 891-897.
6. Fanuscu, M.I. & Chang, T.L. (2004) Three-dimensional morphometric analysis of human cadaver bone: microstructural data from maxilla and mandible. Clinical Oral Implants Research 15: 213-218.
7. Fenner, M., Vairaktaris, E., Fischer, K., Schlegel, K.A., Neukam, F.W. & Nkenke, E. (2009a) Influence of residual alveolar bone height on osseointegration of implants in the maxilla: a pilot study. Clinical Oral Implants Research 20: 555-559.
8. Fenner, M., Vairaktaris, E., Stockmann, P., Schlegel, K.A., Neukam, F.W. & Nkenke, E. (2009b) Influence of residual alveolar bone height on implant stability in the maxilla: an experimental animal study. Clinical Oral Implants Research 20: 751-755.
9. Fermergård, R. & Astrand, P. (2008) Osteotome sinus floor elevation and simultaneous placement of implants - a 1-year retrospective study with Astra Tech implants. Clinical Implant Dentistry & Related Research 10: 62-69.
10. Fornell, J., Johansson, L.Å., Bolin, A., Isaksson, S. & Sennerby, L. (2012) Flapless, CBCT-guided osteotome sinus floor elevation with simultaneous implant installation. I: radiographic examination and surgical technique. A prospective 1-year follow-up. Clinical Oral Implants Research 23: 28-34.
11. González-García, R. & Monje, F. (2012) The reliability of cone-beam computed tomography to assess bone density at dental implant recipient sites: a histomorphometric analysis by micro-CT. Clinical Oral Implants Research, doi: 10.1111/j.1600-0501.2011.02390.x.
12. ™ dental implants. Clinical Oral Implants Research, doi: 10.1111/j.1600-0501.2011.02313.x.
13. Kääb, M.J., Putz, R., Gebauer, D. & Plitz, W. (1998) Changes in cadaveric cancellous vertebral bone strength in relation to time. A biomechanical investigation. Spine 23: 1215-1219.
14. Karl, M., Graef, F., Heckmann, S. & Krafft, T. (2008) Parameters of resonance frequency measurement values: a retrospective study of 385 ITI dental implants. Clinical Oral Implants Research 19: 214-218.
15. Kfir, E., Goldstein, M., Yerushalmi, I., Rafaelov, R., Mazor, Z., Kfir, V. & Kaluski, E. (2009) Minimally invasive antral membrane balloon elevation - results of a multicenter registry. Clinical Implant Dentistry & Related Research 11: e83-e91.
16. Lai, H.C., Si, M.S., Zhuang, L.F., Shen, H., Liu, Y.L. & Wismeijer, D. (2012) Long-term outcomes of short dental implants supporting single crowns in posterior region: a clinical retrospective study of 5-10 years. Clinical Oral Implants Research, doi: 10.1111/j.1600-0501.2012.02452.x.
17. Linde, F. & Sørensen, H.C. (1993) The effect of different storage methods on the mechanical properties of trabecular bone. Journal of Biomechanics 26: 1249-1252.
18. Lundgren, S., Andersson, S., Gualini, F. & Sennerby, L. (2004) Bone reformation with sinus membrane elevation: a new surgical technique for maxillary sinus floor augmentation. Clinical Implant Dentistry & Related Research 6: 165-173.
19. Mah, P., Reeves, T.E. & McDavid, W.D. (2010) Deriving Hounsfield units using grey levels in cone beam computed tomography. Dentomaxillofacial Radiology 39: 323-335.
20. Nkenke, E., Hahn, M., Weinzierl, K., Radespiel-Tröger, M., Neukam, F.W. & Engelke, K. (2003) Implant stability and histomorphometry: a correlation study in human cadavers using stepped cylinder implants. Clinical Oral Implants Research 14: 601-609.
21. Nkenke, E. & Stelzle, F. (2009) Clinical outcomes of sinus floor augmentation for implant placement using autogenous bone or bone substitutes: a systematic review. Clinical Oral Implants Research 20(Suppl 4): 214-218.
22. Noguerol, B., Muñoz, R., Mesa, F., de Dios Luna, J. & O'Valle, F. (2006) Early implant failure. Prognostic capacity of Periotest: retrospective study of a large sample. Clinical Oral Implants Research 17: 459-464.
23. Norton, R.M. & Gamble, C. (2001) Bone classification: an objective scale of bone density using the computerized tomography scan. Clinical Oral Implants Research 12: 79-84.
24. Östman, P.O., Hellman, M. & Sennerby, L. (2005) Direct implant loading in the edentulous maxilla using a bone density-adapted surgical protocol and primary implant stability criteria for inclusion. Clinical Implant Dentistry & Related Research 7: s60-s69.
25. O'Sullivan, D., Sennerby, L., Jagger, D. & Meredith, N. (2004) A comparison of two methods of enhancing implant primary stability. Clinical Implant Dentistry & Related Research 6: 48-57.
26. O'Sullivan, D., Sennerby, L. & Meredith, N. (2000) Measurements comparing the initial stability of five designs of dental implants: a human cadaver study. Clinical Implant Dentistry & Related Research 2: 85-92.
27. Pommer, B., Frantal, S., Willer, J., Posch, M., Watzek, G. & Tepper, G. (2011) Impact of dental implant length on early failure rates: a meta-analysis of observational studies. Journal of Clinical Periodontology 38: 856-863.
28. Pommer, B. & Watzek, G. (2009) Gel-pressure technique for flapless transcrestal maxillary sinus floor elevation: a preliminary cadaveric study of a new surgical technique. The International Journal of Oral & Maxillofacial Implants 24: 817-822.
29. Renouard, F. & Nisand, D. (2006) Impact of implant length and diameter on survival rates. Clinical Oral Implants Research 17(Suppl 2): 35-51.
30. Sotirakis, E.G. & Gonshor, A. (2005) Elevation of the maxillary sinus floor with hydraulic pressure. The Journal of Oral Implantology 31: 197-204.
31. Stelzle, F. & Benner, K.U. (2011) Evaluation of different methods of indirect sinus floor elevation for elevation heights of 10 mm: an experimental ex vivo study. Clinical Implant Dentistry & Related Research 13: 124-133.
32. Summers, R.B. (1994) The osteotome technique: Part 3 - Less invasive methods of elevating the sinus floor. Compendium 15: 698-704.
33. Tabassum, A., Walboomers, X.F., Wolke, J.G., Meijer, G.J. & Jansen, J.A. (2010) Bone particles and the undersized surgical technique. Journal of Dental Research 89: 581-586.
34. Thor, A., Sennerby, L., Hirsch, J.M. & Rasmusson, L. (2007) Bone formation at the maxillary sinus floor following simultaneous elevation of the mucosal lining and implant installation without graft material: an evaluation of 20 patients treated with 44 Astra Tech implants. Journal of Oral & Maxillofacial Surgery 65: s64-s72.
35. Turkyilmaz, I. & McGlumphy, E.A. (2008) Influence of bone density on implant stability parameters and implant success: a retrospective clinical study. BMC Oral Health 8: 32.
36. Turkyilmaz, I., Sennerby, L., McGlumphy, E.A. & Tözüm, T.F. (2009) Biomechanical aspects of primary implant stability: a human cadaver study. Clinical Implant Dentistry & Related Research 11: 113-119.
37. Yamada, J.M. & Park, H.J. (2007) Internal sinus manipulation (ISM) procedure: a technical report. Clinical Implant Dentistry & Related Research 9: 128-135.