Engineering thermofluids: Thermodynamics, fluid mechanics, and heat transfer

Engineering Thermofluids: Thermodynamics, Fluid Mechanics, and Heat Transfer

Volumn , Issue , 2005, Pages 1-1119

  Massoud, Mahmoud ^a  

^a UNIVERSITY OF MARYLAND   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84892357699     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/b138870     Document Type: Book

References (307)

1. Del Frari, Bernard, "The Global Nuclear Fuel Market, World Nuclear Association Symposium, 2001.
2. Dubrovsky, V., "Construction of Nuclear Power Plants", Mir Publishers, Moscow, 1981.
3. Gavrilas, Mirela, et. al., "Safety Features of Operating Light Water Reactors of Western Design", CANES, Massachusetts Institute of Technology, 2000.
4. th Annual Meeting and International Conference on Nuclear Energy, Goteborg, Sweden, 2000.
5. nd Edition, Academic Press, 1982.
6. Marquand C. and D. Croft, "Thermofluids", John Wiley, 1994.
7. Mayo, Robert M., "Introduction to Nuclear Concepts for Engineers", ANS Publications, 1998.
8. Ramsey, Charles B. and Mohammad Modarres, "Commercial Nuclear Power", John Wiley, 1998.
9. Suryanarayana, N. V. V., "Design and Simulation of Thermal Systems"
10. - "US Bureau of the Census", www.census.gov/cgi-bin/ipc/ popclockw
11. - "Alternative sources of energy", www.altenergy.org
12. - "Aviation Turbine Engines", chevron.com/prodserv/fuels/ bulletin/aviationfuel
13. - "British Petroleum Statistical Review of World Energy 2002", February 2003
14. - CNN.com, October 12, 1999
15. - "Code of Federal Regulations, 10 CFR 50-46", nrc.gov/NRC/CFR/Part050
16. - "Energy Efficiency and Renewable Energy", www.eere.energy.gov
17. - "Energy Information Administration", www.eia.doe.gov
18. - "Geothermal Power Plant", Toshiba Power Systems and Services
19. - "Hydro-electric Power", http://acre.murdoch.edu.au/refiles
20. - "Iter Introduction to Fusion", itercanada.com.
21. - "World Energy Beyond 2050", Journal of Petroleum Technology, JPT Online Feb. 2002
22. - "Why Nuclear Power, Comparison of Various Energy Sources." Nucleartourist.com.
23. - "World Nuclear Association, WNA" http://www.world-nuclear. org/info/inf75.htm
24. Abbott, M. M., and H. C. Van Ness, "Thermodynamics", McGraw-Hill, 1972.
25. Anderson, Edward E., "Thermodynamics", PWS Publishing Company, 1994.
26. Bond, John W. Jr., Kenneth Watson, and Jasper A. Welsh, Jr., "Atomic Theory of Gas Dynamics", Addison-Wesley, 1965.
27. th Edition, Longman Scientific & Technical, John Wiley 1993.
28. El-Wakil, M. M., "Powerplant Technology", McGraw-Hill, 1984.
29. rd Edition, John Wiley and Sons, 1999.
30. Hatsopoulos, G. N. and J. H. Keenan, "Prinicples of General Thermodynamics" John Wiley & Sons, Inc., 1965.
31. rd Edition, McGraw-Hill, 1980.
32. nd Edition, McGraw-Hill, 1992.
33. Huang, Francis F., "Engineering Thermodynamics, Fundamentals and Applications", Macmillan, 1976.
34. Masi, J. F., "Trans. ASME", 76:1067, October 1954.
35. McQuiston, F. C. and J. D. Parker, "Heating, Ventilating, and Air Conditioning Analysis and Design", John Wiley, 1977.
36. Meyer, C. A., et. al., "ASME Steam Tables", Thermodynamics and Transport Properties of Steam, Sixth Edition, 1993.
37. Moran, Michael J. and Howard N. Shapiro, "Fundamentals of Engineering Thermodynamics", Second Edition, John Wiley & Sons, Inc. 1992.
38. Nashchokin, V., "Engineering Thermodynamics and Heat Transfer", Mir Publishers, Moscow, 1979.
39. rd Edition, Elsevier, 1990.
40. Reynolds, William C and Henry C. Perkins, "Engineering Thermodynamics", McGraw-Hill 1977.
41. Smith, J. S. and H. C. Van Ness, "Introduction To Chemical Engineering Thermodynamics", Third Edition, McGraw-Hill, 1975.
42. Sonttag, Richard E., Claus Boorgnakke, and Gordon J. an Wylen", Fundamentals of Thermodynamics", fifth edition, John Wiley & Sons, Inc. 1998.
43. Todreas, Neil E., and Mujid S. Kazimi, "Nuclear Systems I. Thermal Hydraulic Fundamentals", Hemisphere Publishing Company, 1990
44. rd Edition, English/SI Version, John Wiley & Sons, Inc. 1986.
45. th Edition, McGraw-Hill, Inc., 1988.
46. Zemansky, Mark W. and Richard H. Ditton, "Heat and Thermodynamics, an Intermediate Textbook", Sixth edition, McGraw Hill, Inc. 1981.
47. Zemansky, Mark W., "Temperatures Very Low and Very High", Dover Publications Inc., 1964.
48. Aris, Rutherford, "Vectors, Tensors, and Basic Equations of Fluid Mechanics", Dover Publications Inc., 1990.
49. th ed. New York, McGrawHill, 1979.
50. th ed., American Society of Mechanical Engineers, New York, 1971.
51. Binder, Raymond C., "Fluid Mechanics", Fifth Edition, Prentice Hall, 1973
52. Boussinesq, see Brodkey, R. S.
53. rd printing, Addison-Wesley, 1967.
54. Burgreen, D., "Flow Coastdown in a Loop After Pumping Power Cutoff", Nuclear Science and Engineering: 6, 306-312, 1959.
55. Carnahan B., H. A. Luther and J. O. Wilkes, "Applied Numerical Methods", Wiley, 1969
56. nd Edition, Van Nostrand Reinhold, 1987.
57. Churchill, S. W., Empirical Expressions for the Shear Stress in Tirbulent Flow in Commercial Pipe", A. IChE. J., Vol. 19, No. 2, pp. 375-376, 1973.
58. Colebrook, see Fox, R. W. and A. T. McDonald. Also White, F. M.
59. Cross, H., "Analysis of Flow in Networks of Conduits or Conductors", University of Illinois Bulletin 286, November 1936.
60. Daily, J. W. and D. R. F. Harleman's, "Fluid Dynamics", Addison Wesley, 1966.
61. Denn, Morton M., "Process Fluid Mechanics", Prentice Hall, 1980.
62. Di Marco, P. et. al., "Experimental Study on Rising Velocity of Nitrogen Bubbles in FC-72", Int. Journal of Thermal Sciences, 42 (2003).
63. rd Edition, Wiley, 1985
64. Goldstein, S., "Modern Development in Fluid Dynamics", Vol. 1. Oxford Press 1952.
65. Granger, Robert A., "Fluid Mechanics", Dover, 1995.
66. Haaland, S. E., "Simple and Explicit Formulas for the Friction Factor in Turbulent Pipe Flow", Journal of Fluid Engineering, 1983.
67. Henry, R. E. and H. K. Fauske, "The Two-Phase Critical Flow Of One Component Mixtures in Nozzles, Orifices, and Short Tubes", Journal of Heat Transfer, May 1971.
68. nd Edition, 1976.
69. Hines, J. O., "Turbulence", McGraw-Hill 1959.
70. Howell, John R. and Richard O. Buckius, "Fundamentals of Engineering Thermodynamics", Second Edition, McGraw-Hill, 1992.
71. Hughes W. F. and J. A. Brighton, "Fluid Dynamics", McGraw-Hill, 1967.
72. nd Edition, Hemisphere Pub. Co., 1986.
73. Kao, S. P., "A PWR mathematical model", Ph. D. Thesis, Dept. of Nuclear Eng., MIT 1984.
74. Lansford, W. M., "The Use of an Elbow in a Pipe Line for Determining the Flow in the Pipe", Eng. Exp. Sta. University of Illinoise, Bull. 289, 1936.
75. Liepmann, H. W. and A. Roshko, "Elements of Gas Dynamics", 2001.
76. Lyons, J. L., "Lyons' Valve Designers Handbook", Van Nostrand Reinhold, 1982.
77. Meyer, Richard E., "Introduction to Mathematical Fluid Mechanics", Dover, 1971.
78. Miller, R. W., "Flow Measurement Engineering Handbook", New York, McGraw-Hill, 1983.
79. Moody, L. F., "Friction Factor for Pipe Flow", Transactions, ASME, Vol. 66, 1944, p. 671.
80. Moody, F. J., "Maximum Discharge Rate of Liquid Vapor Mixtures From Vessels", In ASME Symposium: Nonequilibrium Two-Phase Flows. 1975, pp. 27-36.
81. Moody, F. J., "Introduction to Unsteady Thermofluid Mechanics", Wiley, 1990.
82. Nahavandi, Amir N. and Michael P. Rashevsky, "A Digital Computer Program for Critical Flow Discharge of Two-Phase Flow, Steam-Water Mixture (Critco Code). CVNA-128, February, 1962.
83. Nahavandi, Amir N. and G. V. Catanzaro, "Matrix Method for Analysis of Hydraulic Networks", Journal of the Hydraulic Division, Proceedings of the American Society of Civil Engineers, January, 1973.
84. Nayyar, M. L., "Piping Handbook", 6th Ed. McGraw-Hill. 1992.
85. Nikuradze, see Fox, R. W. and A. T. McDonald. Also White, F. M.
86. Pai, S. I., "Viscous Flow Theory", Vol. II - Turbulent Flow, D. Van Nostrand, Princeton, 1957.
87. Parmakian, J., "Waterhammer Analysis", Prentice-Hall, 1955.
88. th Ed, McGraw-Hill, 1975.
89. Peterson, C. E., et. al., "RETRAN-02, Volume 1: Theory & Numerics", Revision 4, EPRI 1NP-1850-CCM-A. 1988.
90. Potter, Merle C. and David C. Wiggert, "Mechanics of Fluids", Prentice-Hall, 1991.
91. Rust, James H., "Nuclear Power Plant Engineering", Haralson, 1979.
92. th Edition, McGraw-Hill, 1979.
93. Swamee, P. K. and A. K. Jain, "Explicit Expressions for Pipe Flow Problems", Journal of Hydraulic Division Proceedings, ASCE, pp. 657-664, May 1976.
94. rd. Printing, 2000.
95. rd. International Conference on Pressure Vessels and Piping, San Francisco, June 1979.
96. Tomiyama, Akio et. al., "Shapes of Rising Velocities of Single Bubbles Rising through an Inner Subchannel", Nuc. Science & Tech. Vol. 40, No. 3, March 2003
97. Tullis, J. Paul, "Hydraulics of Pipelines, Pumps, Valves, Cavitation, Transients", John Wiley & Sons, 1989.
98. Watters, Gary Z., "Analysis and Control of Unsteady Flow in Pipelines", Second Edition, Butterworth, Ann Arbor Science Book, 1984.
99. th Edition, John Wiley & Sons, 1975.
100. von Karman, T., "Uber Laminaire und Turbulente Reibung", Angew. Math. Mech., vol. 1, pp. 233-252, 1921;
101. also NACA Tech. Mem. 1092, 1946.
102. nd Edition, Wiley, 1976.
103. nd. Ed. McGraw Hill. 1986.
104. White, F. M., "Viscous Fluid Flow", McGraw-Hill, 1974.
105. Wiely, Benjamin E. and Victor L. Streeter, "Fluid Transients in Systems", Prentice Hall, 1997.
106. Zucrow, Maurice J. and Joe D. Hoffman, "Gas Dynamics", Volume 1, John Wiley & Sons, 1976.
107. -, ASME Boiler and Pressure Vessel Code, Section III, Division 1-Subsection NB, Class 1 Components. ANSI/ASME BPV-III-1-NB, 1980 edition.
108. -, CRANE Tech. Paper 410, "Flow Of Fluids in Valves, Fittings, & Pipes", 1980.
109. -, EPRI Report, "Critical Flow Predictions through Safety & Relief Valves", EPRI-NP-2878 LD, February 1983.
110. -, EPRI Report, "Safety and Relief Valves in Light Water Recators", edited by Avtar Singh NP-4306-SR, December 1985.
111. -, FSAR, Yankee Atomic Electric Company.
112. -, Measurement of Fluid Flow by Means of Orifice Plates, Nozzles, and Venturi Tubes Inserted in Circular Cross Section Conduits Running Full", ISO Rep. DISTRIBUTION-5167, Geneva, 1976.
113. Arpaci, V. S., "Conduction Heat Transfer", Addison Wesley, 1966.
114. Blasius, H. Z., Math. Phys., 56, 1, 1908.
115. nd ed., Oxford University Press, 1959.
116. Chapman, Alan J., "Heat Transfer", 4th Ed., Macmillan, 1984.
117. Churchill, S. W., "Free Convection Around Immersed Bodies", in Heat Exchanger Design Handbook, Hemisphere Publishing Co., 1983.
118. Churchill, S. W., and H. H. S. Chu, "Correlating Equations for Laminar and Turbulent Free Convection from a Vertical Plate", Int. Journal of Heat Mass Transfer, vol. 18, p. 1323, 1975.
119. Churchill, S. W., and H. H. S. Chu, "Correlating Equations for Laminar and Turbulent Free Convectionfrom a Horizontal Cylinder", Int. Journal of Heat Mass Transfer, vol. 18, p 1049, 1975.
120. Churchill, S. W., and H. Ozoe, "Correlations for Laminar Forced Convection in Flow Over an Isothermal Flat Plate and in Developing and Fully Developed Flow in an Isothermal Tube", Journal of Heat Transfer, vol. 95, p. 46, 1973.
121. Dittus, F. W. and L. M. K. Boelter, University of California, Berkley, Pub. Eng., vol. 2, 1930, p. 443.
122. Dwyer, O. E., "Liquid Metals Handbook, Sodium and Nak Supplement", Washington D. C., U. S. Atomic Energy Commission, 1970, Chapter 5.
123. Eckert, E. R. G. and Robert M. Drake, Jr., "Analysis of Heat and Mass Transfer", McGraw-Hill, 1972.
124. El-Wakil, M. M., "Nuclear Heat Transport", ANS. 1978.
125. Fishenden, M. and Saunders, O., "An Introduction to Heat Transfer", Oxford University Press, 1950.
126. -, "General Electric BWR Thermal Analysis Basis Data; Correlation and Design Applications. NADO-10958, 1973.
127. Holman, J. P., "Heat Transfer", 7th Ed. McGraw Hill. 1990
128. Howarth, L., "On the Solution of the Laminar Boundary Layer Equations", Proc. Royal Society. London, Series A, 164, 1938, p. 547.
129. Lyon, R. N., "Liquid Metal Handbook", Department of the Navy, June 1952.
130. rd Ed., Wiley, 1990.
131. Jakob, M., Heat Transfer", vol. 1, John Wiley & Sons, Inc., 1949.
132. Kakac, S. and R. K. Shah, W. Aung, "Handbook of Single-Phase Convective Heat Transfer", John Wiley. 1987.
133. rd. Ed. Harper & Row. 1973 & 1986.
134. Kutateladze, S. S., "Fundamentals of Heat Transfer", Academic Press, New York, 1963.
135. Lahey, R. T., and F. J. Moody, "The Thermal-Hydraulics of a Boiling Water Nuclear Reactor", American Nuclear Society, 1977.
136. Lienhard, John H., "A Heat transfer Textbook", Prentice-Hall, Inc., 1981.
137. nd ed., Prentice Hall, 2001.
138. rd. ed. McGraw Hill 1954.
139. Ostrach, S., "An Analysis of Laminar Free Convection Flow and Heat Transfer About a Flat Plate Parallel to the Direction of the Generating Body Force", NACA Tech. Note 2635, 1952.
140. Ozisik, M. N., "Basic Heat Transfer", McGraw Hill. 1977.
141. Rohnesnow, W. M. and H. Choi, "Heat, Mass & Mom. Transfer", Prentice Hall. 1961.
142. Rohsenow, W. M., "Handbook of Heat Transfer", McGrawHill, 1973.
143. Schneider, P. J., "Conduction Heat Transfer", Addison Wesley, 1955.
144. Seban, R. A., and T. Shimazaki, "Heat Transfer to Fluid Flowing Turbulently in a Smooth Pipe and with Walls at Constant Temperature", ASME Paper 50-A-128, 1950.
145. Seider, E. N., and E. G. Tate, "Heat Transfer and Pressure Drop of Liquids in Tubes", Ind. Eng. Chem., Vol. 28, 1936, p. 1429.
146. Suryanarayana, N. V., "Engineering Heat Transfer", West Publishing Company, 1995.
147. rd Printing, Taylor & Francis, 2000.
148. Whitaker, S., "Forced Convection Heat Transfer Correlations for Flow in Pipes, Past Flat Plates, Single Cylinders, Single Spheres, and Flow in Packed Beds and Tube Bundles", AICHE Journal, vol. 18, 1972.
149. White, F. M., "Heat Transfer", Addison Wesley. 1984.
150. Zhukauskas, A., "Heat Transfer from Tubes in Cross Flow", Adv. in Heat Transfer, vol. 8 Academic Press, 1972.
151. Berenson, P. J., "Experiments of Pool Boiling Heat Transfer", Int. Journal of Heat Mass Transfer, 5, 1962.
152. Bernath, L., Transactions of A. I. Ch. E., 1955.
153. Biasi, L., et. al., "Studies on burnout, Part 3. Enrgy Nucl. 14:530, 1967.
154. Bjornard, T. A. and P. Griffith, "PWR Blowdown Heat Transfer", Symposium on Thermal and Hydraulic Aspects of Nuclear Reactor Safety (Vol. 1). New York, ASME 1977.
155. Bowring, R. W., "Simple but Accurate Round Tube, Uniform Heat Flux Dryout Correlation over the Pressure Range 0.7 to 17 MPa", AEEW-R-789, U. K. Atomic Energy Authority, 1972.
156. Bromley, L. A., "Heat Transfer in Stable Film Boiling", Chem. Eng. Prog., 46, 221, 1950.
157. Chen, John C., "A Correlation for Boiling Heat Transfer to Saturated Fluids in Convection Fow", ASME paper 63-HT-34, 1963.
158. Cheng, S. C, W. Ng, and K. T. Heng, "Measurements of Boiling Curves of Subcooled Water Under Forced Convection Conditions", Int. Journal of Heat Mass Transfer 21:1385, 1978.
159. Cichitti, A., et. al., "Two-Phase Cooling Experiments - Pressure Drop, Heat Transfer, and Burnout Measurements", Energia Nucl. 7:407, 1960.
160. Collier, John G. and Thome, John R., "Convective Boiling and Condensation", Third Edition, Oxford University Press, 1996.
161. Delhaye, J. M., M. Giot, and M. L. Riethmuller, "Thermohydraulics of Two-Phase Systems for Industrial Design and Nuclear Engineering", McGraw Hill/Hemisphere, 1981.
162. Dergarabedian, P., "The Rate of Growth of Bubbles in Superheated Liquid", Journal of Appl. Mech. Trans. ASME, vol. 75, 1953.
163. Dhir, V. K. and J. H. Lienhard, "Laminar Film Condensation on Planes and Axisymmetric Bodies in Non-uniform Gravity", Journal of Heat Transfer, 93, 97-100, 1971
164. Duckler, A. E., et. al., "Pressure Drop and Hold-up in Two-Phase Flow: Part A - A Comparison of Existing Correlations. Part B - An Approach Through Similarity Analysis", AIChE Journal, 10:38, 1964.
165. Fauske, H. F., "The Discharge of Saturated Water Through Tubes", Chem. Eng. Sym. Series 61:210, 1965.
166. Friedel, L., "Improved Friction Pressure Drop Correlations for Horizontal and Vertical Two-Phase Pipe Flow, European Two-Phase Flow Group Meeting, Ispra, Italy, 1979.
167. Forster, H. K. and N. Zuber, "Dynamics of Vapor Bubbles and Boiling Heat Transfer", AIChE Journal, 1(4), 531-535, 1955.
168. th Int. Heat Transfer Conference, Tokyo, Japan, 3-7, September 1974, CONF-740925, 1975.
169. George, Thomas L., et. al., "GOTHIC Containment Analysis Package, Technical Manual", Numerical Applications, Inc., Richland, Washington, NAI 8907-06, Rev. 12, July 2001.
170. Ginoux, J. N., "Two-Phase Flow and Heat Transfer", McGraw Hill/Hemisphere, 1978.
171. Groeneveld, D. C., "Post Dryout Heat Transfer at Reactor Operating Conditions, AECL-4513, 1973.
172. Henry, R. E., "The Two-Phase Critical Discharge of Initially Saturated or Subcooled Liquid", Nuclear Science and Engineering, 41, 1970, pp 336.
173. Henry, R. E., and H. F. Fauske, "The Two-Phase Critical Flow of One-Component Mixtures in Nozzles, Orifices, and Short Tubes", Transactions of ASME, Journal of Heat Transfer 93, 179-187, May 1971.
174. Hewitt, G. F. and D. N. Roberts, "Studies of Two-Phase Flow Patterns by Simultaneous X-Ray and Flash Photography", AERE-M2159, 1969.
175. Hsu, Yih-Yun, "On the Size Range of Active Nucleation Cavities in Nucleate Boiling", Journal of Heat Transfer, 84C (3), 207-216, 1962.
176. Hsu, Yih-Yun and Robert W. Graham, "Transport Processes in Boiling and Two-Phase Systems, McGraw Hill Publishing Company, 1976.
177. Janssen, E. and Levy, S., "General Electric Company Report APED-3892, 1962.
178. Jens, W. H. and P. A. Lottes, "Analysis of Heat Transfer, Burnout, Pressure Drop, and Density Data for High Pressure Water", ANL-4627, 1951.
179. Kandlikar, S. G., "A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes", J. Heat Transfer, 112(1):219-228, 1990.
180. Katto, Y. and Haramura, Y., "Critical Heat Flux on a uniformly heated horizontal cylinder in an upward cross flow of saturated liquid", Int. Journal Heat Mass Transfer, 26, pp 1199-1205, 1983.
181. Mandhane, J. M. et. al., "A Flow Pattern Map for Gas-Liquid Flow in Horizontal Pipes", International Journal of Multiphase flow, 1:537, 1974.
182. -, RELAP-5, MOD1 Code Technical Manual
183. Labuntsov, D. A., "Heat Transfer in Film Condensation of Pure Steam on Vertical Surfaces and Horizontal Tubes", Teploenergetika, 4, 72, 1957.
184. McAdams, W. H., et. al., "Vaporization Inside Horizontal Tubes. II. Benzene-Oil Mixture, Trans. ASME 64:193, 1942.
185. MacBeth, R. V., "Burn-out Analysis, Part 4. Application of a local condition hypothesis to world data for uniformly heated round tubes and rectangular channels", AEEW-R 267, 1963.
186. McDonough, J. B., W. Milich, W., and E. C. King, "An Experimental Study of Partial Film Boiling Region with Water at Elevated Pressures in a Round Vertical Tube. Chem. Eng. Prog. Sym. Series 57:197, 1961.
187. Martinelli, R. C. and D. B. Nelson, "Prediction of Pressure Drop During Forced Circulation Boiling of Water", Trans. ASME 70:695, 1948.
188. Moody, F. J., "Maximum Flow Rate of a Single-Component, Two-Phase Mixture", Journal of Heat Transfer, Vol. 87, 134-142, February 1965.
189. Moore, K. V. and W. H. Rettig, "RELAP4 - A Computer Program for Transient Thermal-Hydraulic Analysis", ANCR-1127, Idaho National Laboratory, Idaho Falls, Idaho, 1975.
190. Myer, John E., "Conservation Laws in One-Dimensional Hydrodynamics", WAPD-BT-20, Sept. 1960.
191. Nahavandi, Amir N and Michael P. Rashevsky, "A Digital Computer Program for Critical Flow Discharge of Two-Phase Steam-Water Mixtures", CVNA-128, February 1962.
192. Nukiyama, S., "The Maximum and Minimum Values of Heat Transmitted from Metal to Boiling Water Under Atmospheric Pressure", Int. J. Heat Mass Transfer, 9, 1966.
193. Pei, B. S. et. al., "Evaluations and Modifications of the EPRI-1 Correlation of PWR Critical Heat Flux Predictions Under Normal & Abnormal Fuel Conditions", Nuclear Tech., Vol. 75, No. 2, November 1986.
194. Reddy, D. G., R. S. Sreepada, and Amir. N. Nahavandi, "Two-Phase Friction Multiplier Correlation for High - Pressure Steam Water Flow", EPRI, NP-2522, July 1982.
195. Scriven, L. E., "On the Dynamics of Bubbles in Superheated Water", Chem. Eng. Sci., vol. 10, 1959.
196. Stephen, Karl, "Heat Transfer in Condensation and Boiling", Springer-Verlag, 1992.
197. Tong, L. S., "Boiling Crisis and Critical Heat Flux, TID-25887 NTIS, 1972.
198. Thom, J. R. S., et. al., "Boiling in Subcooled Water During Flow in Tubes and Annuli", Proc. Int. Mech. Eng. 180:226, 1966.
199. Thom, J. R. S., "Prediction of Pressure Drop During Forced Circulation Boiling of Water", Int. Journal of Heat Mass Transfer 7:709, 1964.
200. Wallis, G. B., "One Dimensional Two-Phase Flow", McGraw Hill, New York. 1969.
201. Whalley, P. B., "Boiling, Condensation, and Gas-Liquid Flow", Oxford University Press, 1990.
202. Winterton, R. H. S., "Thermal Design of Nuclear Reactors", Pergamon Press, 1981.
203. Zivi, S. M., "Estimation of Steady-State Steam Void Fraction By Means of The Principle of Minimum Entropy Production", Trans. ASME (J. Heat Transfer), 86, 247-52.
204. Zuber, N, and J. A. Findlay, "Average Volumetric Concentration in Two-Phase Flow Systems", J. Heat Transfer, 87:453, 1965.
205. Zuber, N., "On the Stability of Boiling Heat Transfer", Trans. ASME, 80, 1958.
206. Zuber, N. and M. Tribus, "Further Remarks on the Stability of Boiling Heat Transfer", UCLA, Report No. 58-5, January 1958.
207. th Edition, Tubular Exchanger Manufacturers association, New York, 1988.
208. Fraas, A. P and M. N. Ozisik, "Heat Exchanger Design", Wiley, 1965
209. th Annual ISA Industry Symposium, July 2001, Fl. USA
210. Harpster, Joseph W., "On Understanding the Behavior of Non-Condensables in the Shell Side of Steam Surface Condensers", ASME Conference, June 2001, Louisiana. USA
211. rd Edition, John Wiley & Sons, 1990
212. Kakac, Sadik and Hongtan Liu, "Heat Exchangers Selection, Rating, and Thermal Design", CRC Press LLC, 1998.
213. Kreith, F. and R. F. Boehm, "Direct - Contact Heat Exchangers", Hemisphere Pub. Corp., 1988
214. Li, Chung Hsiung, "Exact Transient Solutions of Parallel-Current Transfer Processes", Journal of Heat Transfer, Vol. 108, 365-369, May 1986.
215. Lorenzini, E., et. al., "Numerical Transient Analysis of Parallel and Counter Flow Heat Exchangers", Journal of Heat and Technology, Vol. 7, No. 2, 1989.
216. Nahavandi A. N., M. A. Vorkas, and V. J. D'emidio, "Cost Optimization of Vertical Natural Circulation Steam Generators", Nuclear Engineering and Design 36, 1976.
217. Romie, F. E., "Transient Response of the Counterflow Heat Exchanger", Transactions of ASME, Vol. 106, 620-626. August 1984
218. Singh, K. P. and A. I. Soler, "Mechanical Design of Heat Exchangers", Arcturus Publishers, 1984
219. Taborek, et. al., "Heat Exchangers, Theory and Practice" Hemisphere Publishing Corp. 1983
220. -, ASME Fluid Meters Research Committee, "The ISO-ASME Orifice Coefficient Equation", Mech. Eng. July 1981.
221. -, ASME, "Flowmeter Computation Handbook", New York, 1961.
222. Baker, Roger C., "Flow Measurement Handbook, Industrial Designs, Operating Principles, Performance, and Applications", Cambridge University Press, 2000.
223. -, Flow Control Magazine, April/May, 2000.
224. th ed., ASME, New York, 1971 Control magazine, October 2002
225. nd. Edition. Cambridge University Press, 1997.
226. th edition, McGraw Hill 2001.
227. King, L. V., "On the Convection of Heat from Small Cylinders in a Stream of Fluid, with Applications to Hot-Wire Anemometry", Phil. Trans. Roy. Soc. London, vol. 214, no. 14, p. 373, 1924.
228. Kline, S. J. and F. A. McClitock, "Describing Uncertainties in Single-Sample Experiments", Mechanical Engineering, 75, 1, pp. 3-9. January 1953
229. nd Ed. McGraw-Hill. 1986.
230. nd edition, CRC Press, 2005.
231. Krivchenko, G. I., "Hydraulic Machines, Turbines and Pumps", Mir Publishers, Moscow, 1986.
232. th ed., Macmillan Publishing Company, 1994.
233. nd. Ed. McGraw Hill. 1986.
234. Wiely, Benjamin E. and Victor L. Streeter, "Fluid Transients in Systems", Prentice Hall, 1997.
235. nd edition, McGraw Hill, 1965.
236. Burgreen, David, "Flow Coastdown in a Loop after Pumping Power Cutoff", Nuclear Science and Engineering, 6, 306-312, 1959.
237. nd Edition, McGraw Hill.
238. George, Thomas L., et. al., "GOTHIC Containment Analysis Package, Technical Manual", Version 6.1, July 1999. NAI 8907-06, Rev. 9
239. Hargroves, D. W. and L. J. Metcalfe et. al., "CONTEMPT-LT/028A Computer Program for Predicting Containment Pressure - Temperature Response to a Loss-Of-Coolant-Accident", NUREG/CR-0255, 1979.
240. Kao, Shih Ping, "A Multiple-Loop Primary System Model for Pressurized Water Reactor Plant Sensor Validation", Ph. D. Thesis, Department of Nuclear Engineering, MIT, 1984.
241. Lin, C. C. et. al., "CONTEMPT4/MOD4, A Multi-compartment Containment System Analysis Program", NUREG/CR-3716, BNL-NUREG-51754, March 1984.
242. McFadden, J. H. et. al., "RETRAN-02 - A Program for Transient Thermal-Hydraulic Analysis of Complex Fluid Flow Systems", EPRI NP-1850-CCM-A, Volume 1, Revision 4, 1988.
243. Myer, John E., "Some Physical and Numerical Considerations for he SSC-S Code", Brookhaven National Lab., BNL-NUREG 50913, 1978.
244. Reeder, Douglas L., "LOFT System and Test Description", NUREG/CR-0247, July 1978.
245. Rust, J. H., "Nuclear Power Plant Engineering", Haralson Publishing Co., Buchanon, GA, 1979.
246. -, "LOFT Integral Test System Design Basis Report", DBR-1, Aerojet Nuclear Inc., Jan. 1974.
247. Weisman, J., "Heat Transfer to Water Flowing Parallel to Tube Bundles", Nuc. Sci. & Eng. 6:78, 1979.
248. -, "American Nuclear Standard for Decay Heat Power in Light Water Reactors", American Nuclear Society (ANS), ANSI/ANS-5.1-1979. August 1979.
249. Almenas, Kazys and Richard Lee, "Nuclear Engineering, An Introduction", Springer-Verlag, 1992.
250. Bernath, L., Transactions A. I. Ch. E., 1955.
251. nd Edition, Prentice-Hall, Inc. 1981
252. Collier, John G. and Geoffrey F. Hewitt, "Introduction to Nuclear Power", Hemisphere Publishing Company, 1987.
253. Connolly, Thomas J., "Foundations of Nuclear Engineering", John Wiley & Sons, 1978.
254. Duderstadt, James J. and Louis J. Hamilton, "Nuclear Reactor Analysis", John Wiley & Sons, 1976.
255. Evans, Robley D., "The Atomic Nucleus", McGraw-Hill, Fourteenth Printing, 1972.
256. Ferziger, Joel H. and P. F. Zweifel, "The Theory of Neutron Slowing Down in Nuclear Reactors, The MIT Press, 1966.
257. th Ed. Allyn & Bacon, 1983.
258. Glasstone, Samuel and Alexander Sesonske, "Nuclear Reactor Engineering", Van Nostrand Reinhold Company, 1967.
259. Henry, Alan F., "Nuclear Reactor Analysis", The MIT Press, 1975.
260. Klimov, A., "Nuclear Physics And Nuclear Reactors", MIR Publishers, Moscow, 1975.
261. Knief, Ronald Allen, "Nuclear Criticality Safety, Theory and Practice", Sixth Printing, American Nuclear Society, 1998.
262. Knoll, Glenn F., Radiation Detection And Measurement", John Wiley & Sons, 1979.
263. Mayo, Robert M., "Introduction to Nuclear Concepts for Engineers", American Nuclear Society, 1998.
264. Ott, Karl O. and Winfred A. Bezella, "Introductory Nuclear Reactor Statics", Revised edition, ANS 1989.
265. Price, William J., "Nuclear Radiation Detection", second Edition, McGraw-Hill, 1964
266. Rahman, Inam-Ur and Paulinus S. Shieh, "Introduction to Nuclear Engineering", Robert E. Krieger Publishing Company, 1981.
267. Schaeffer, N. M., "Reactor Shielding for Nuclear Engineers", National Technical Information Center, TID-25951, 1973.
268. Shultis, J. Kenneth and Richard E. Faw, "Radiation Shielding", American Nuclear Society, 2000.
269. Shultis, J. Kenneth and Richard E. Faw, "Fundamentals of Nuclear Science and Engineering", Marcel Dekker, Inc. 2002.
270. Walker, F. William, et. al., "Nuclides and Isotopes, Chart of Nuclides", Fourteenth Edition, GE Nuclear Energy, General Electric Company, 1989.
271. Weisman, Joel, "Elements of Nuclear Reactor Design", Second Edition, Robert E. Krieger Publishing Company, 1983.
272. -, "Residual Decay Energy for Light Water Reactors for Long Term Cooling", NRC Standard Review Plan (NUREG-0800), Rev. 2, Section 9.2.5-8, Branch Technical Position ASB 9-2, July 1981.
273. th Printing, 1972.
274. Acton, F. S., "Numerical Methods that Work", Harper & Row, 1970
275. nd. Ed., Dellen Pub. Co., 1986.
276. Bendat, Julis S. and Allan G. Piersol, "Random Data: Analysis and Measurement Procedures", Wiley-Interscience, 1971.
277. nd ed. Wiley, 2002.
278. Byrkit, Donald R., "Elements of Statistics", D. Van Nostrand, 1972.
279. rd Edition, Wiley, 1977.
280. Carnahan B., H. A. Luther and J. O. Wilkes, "Applied Numerical Methods", Wiley, 1969.
281. nd Edition, Addison Wesley, 1980.
282. Dankoo, P. E., et. al., "Higher Mathematics in Problems and Exercises", Mir Publishers, Moscow, 1983.
283. Demidovich, B. P. and I. A. Maron, "Computational Mathematics", Mir Publishers, Moscow, 1987.
284. Elsayed, E. A., "Reliability Engineering", Addison Wesley Longman, Inc., 1996.
285. Evans, Robley D., "The Atomic Nucleus", McGraw Hill, 1972.
286. Griffith D. V. and I. M. Smith, "Numerical Methods for Engineers", CRC Press, 1991.
287. nd Edition, Dover 1974.
288. nd Edition, Prentice Hall, 1976.
289. Hunt, R. A., "Calculus with Analytic Geometry", Harper & Row, 1988.
290. Kellison, Stephen G., "Fundamentals of Numerical Analysis", Richard D. Irwin, Inc. 1975.
291. nd Edition, McGraw-Hill, 1968.
292. Krasnov, M., et. al., "Mathematical Analysis for Engineers", Volume 2, Mir Publishers, Moscow, 1990.
293. th Ed. Wiley. 1993.
294. Kroemer, Herbert, "Quantum Mechanics for Engineering, Materials Science, and Applied Physics", Prentice Hall, 1994.
295. Modarres, Mohammad, "Reliability and Risk Analysis", Marcel Dekker, Inc., 1993.
296. Meyer, Richard E., "Introduction to Mathematical Fluid Mechanics", Dover Publication, Inc., 1971.
297. Larson, Ronald E. and R. P. Hostetler, "Calculus with Analytic Geometry", D. C. Heat & Co., 1979.
298. Liboff, Richard L., "Introductory Quantum Mechanics", Holden-Day Inc. 1980
299. Nakamura, Shoichiro, "Computational Methods in Engineering & Science", Wiley, 1977.
300. Ozisik, Necati, "Finite Difference Methods in Heat Transfer", CRC Press, 1994
301. Park, David, "Introduction to Quantum Theory", McGraw Hill, 1964.
302. Pauli, Wolfgang, "Wave Mechanics", Dover Publications, Inc., 1973.
303. Rossing, Thomas D and N. H. Fletcher, "Principles of Vibration and Sound", Springer Verlog, 1995.
304. Schiesser, W. E., "Computational Methods in Engineering & Applied Science", CRC, 1994.
305. rd. Ed., Prentice Hall, 1981.
306. th Edition, Addison-Wesley, 1972
307. th Edition, McGraw-Hill, 1982.