DRM, a design research methodology

DRM, a Design Research Methodology

Volumn , Issue , 2009, Pages 1-397

  Blessing, Lucienne T M ^a   Chakrabarti, Amaresh ^b  

^a UNIVERSITY OF LUXEMBOURG   (Luxembourg)

^b INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84892222817     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-84882-587-1     Document Type: Book

References (285)

1. Asimov M (1962) Introduction to design. Prentice Hall, Englewood Cliffs NJ
2. Blessing LTM (1991) Engineering design and Artificial Intelligence: a promising marriage?. In: Cross N, Dorst K and Roozenburg N (eds) Research in design thinking, Delft University Press, Delft, pp 177-212
3. Blessing LTM (1994a) A process-based approach to computer-supported engineering design. PhD thesis, University of Twente, Twente
4. Blessing LTM (1994b) From design characteristics to system requirements. Cambridge University Engineering Department. Technical Report CUED/C-EDC/TR16
5. Dylla N (1990) Denk- und Handlungsabläufe beim Konstruieren. PhD Thesis, Technische Universität München, Fakultät für Maschinenwesen, München
6. French M J (1971) Engineering Design: the conceptual stage. Heinemann, London
7. Fricke G (1993) Konstruieren als flexibler Problemlöseprozeß: empirische Untersuchung über erfolgreiche Strategien und methodische Vorgehensweisen beim Konstruieren. PhD thesis, Technische Universität Darmstadt, VDI Fortschrittberichte 1.227, VDI Düsseldorf
8. Pahl G, Beitz W (1996), Engineering Design. 2nd edn, Springer Verlag, Berlin
9. Chakrabarti A (1991) Designing by functions. PhD Thesis, Department of Engineering, University of Cambridge, Cambridge, UK
10. Chakrabarti A, Bligh TP (1994) Functional synthesis of solution-concepts in mechanical conceptual design. Part I: Knowledge representation. Res Eng Design 6(3):127-141
11. Chakrabarti A, Bligh TP (1996a) Functional synthesis of solution-concepts in mechanical conceptual design. Part II: Kind synthesis. Res Eng Design 8(1):52-62
12. Chakrabarti A, Bligh TP (1996b) Functional synthesis of solution-concepts in mechanical conceptual design. Part III: Spatial configuration. Res Eng Design 8(2):116-124
13. Chakrabarti A, Bligh TP (1996c) An approach to functional synthesis of design concepts: Theory, application, and emerging research issues. AI EDAM 10(4):313-331
14. Chakrabarti A, Tang MX (1996) Generating conceptual solutions on FuncSION: Evolution of a functional synthesiser. In: Gero JS and Sudweeks F (eds) Artificial Intelligence in Design '96, pp 603-622, Kluwer Academic, Doredrecht
15. Chakrabarti A, Johnson AL, Kiriyama T (1997) An approach to automated synthesis of solution principles for micro-sensor designs. In: International Conference on Engineering Design (ICED97), Tampere, 2:125-128
16. French MJ (1985) Conceptual design for engineers. Design Council, London
17. Langdon P, Chakrabarti A (1999) Browsing a large solution space in breadth and depth. In: International Conference on Engineering Design (ICED99), Munich
18. Liu YC, Chakrabarti A, Bligh TP (1999a) A strategy for functional design. In: International Conference on Engineering Design (ICED99), Munich
19. Liu YC, Chakrabarti A, Bligh TP (1999b) Transforming functional solutions into physical solutions. In: ASME DTM Conference, Las Vegas
20. Pahl G, Beitz W (1996) Engineering Design. Design Council, London
21. Roth K (1970) Systematik der Maschinen und ihrer Mechanischen Elementaren Functionen. Feinwerktechnik 74:453-460
22. Badke-Schaub P, Tisdale T (1995) Die Erforschung menschlichen Handelns in komplexen Situationen. In: Strauß B and Kleinmann M (eds): Computersimulierte Szenarien in der Personalarbeit. Verlag für angewandte Psychologie, Göttingen
23. Dörner, D (1996) The logic of failure. Metropolitan Books, New York
24. Dörner D, Wearing AJ (1995) Complex problem solving: Toward a (computer simulated) theory. In: Frensch PA and Funke J (eds.): Complex problem solving: the European perspective. Lawrence Erlbaum Associates, Hillsdale NJ
25. Dorsch F (1982) Psychologisches Wörterbuch. Huber, Wien
26. Ehrlenspiel K (1995) Integrierte Produktentwicklung: Methoden für Prozeßorganisation, Produkterstellung und Konstruktion. Hanser, München
27. Eisentraut R (1997) Problem solving styles in mechanical engineering design. In: Riitahuhta A (ed.) International Conference on Engineering Design (ICED'97). Schriftenreihe WDK 25, Edition Heurista, Zürich
28. Flanagan JC (1954) The Critical Incident Technique. Psychological Bulletin 51(4): 327-358
29. Frankenberger E (1997) Arbeitsteilige Produktentwicklung - Empirische Untersuchungen und Empfehlungen zur Gruppenarbeit in der Konstruktion. PhD thesis, Technische
30. Universität Darmstadt, Germany Frankenberger E, Auer P (1997) Standardized observation of teamwork in design. Research in Engineering Design 9(1):1-9
31. Frankenberger E, Badke-Schaub P (1997) Influences on design productivity - empirical investigations of group design processes in industry. In: Duffy A (ed.) The design productivity debate. Springer, London
32. Goldschmidt G (1996) The designer as a team of one. In: Cross N, Christiaans H and Dorst K (eds) Analysing design activity. John Wiley and Sons, New York
33. Pahl G. Beitz W (1996) Engineering design. Springer, London
34. Stäudel T (1987) Problemlösen, Emotionen und Kompetenz: die Überprüfung eines integrativen Konstrukts. Roderer, Regensburg
35. Barkan P (1992) Productivity in the product development process. In: Susman GI (ed.) Integrating design and manufacturing for competitive advantage. Oxford University Press, New York, pp 56-68
36. Baudin C, Gevins J, Baya V, Mabogunje A (1992) Dedal: Using domain concepts to index engineering design information. In: 14th Annual Conference of the Cognitive Science Society, Bloomington, Indiana, pp 702-707
37. Baudin C, Gevins J, Baya V, (1993) Using device models to facilitate the retrieval of multimedia design information. In: 13th Int. Joint Conference on Artificial Intelligence. Chambery, France, pp 1237-1243
38. Baya V, Gevins J, Baudin, C, Mabogunje A., Toye G, Leifer LJ (1992) An experimental study of design information. In: 4th Int. Conference on Design Theory and Methodology, Scottsdale, Arizona, pp 141-147
39. Cohen GP (1992) The virtual design team: an information processing model of design team management. Department of Civil Engineering, Stanford University, Stanford, California, PhD thesis
40. Christiansen TR (1993) Modeling efficiency and effectiveness of coordination in engineering design teams. Department of Civil Engineering, Stanford University, Stanford, California, PhD thesis
41. Lawson B (1990) How designers think. 3rd edn., Butterworth, London
42. Mabogunje A (1997) Measuring conceptual design process performance in mechanical engineering: A question based approach. Department of Mechanical Engineering, Stanford University, Stanford, California, PhD thesis
43. Minneman SL (1991) The social construction of a technical reality: empirical studies of group engineering design practice. Department of Mechanical Engineering, Stanford University, Stanford, California, PhD thesis
44. Stomph-Blessing LTM (1991) Analysing design: a comparison of approaches. Unpublished report presented at the International Conference on Engineering Design (ICED'91), Heurista, Zurich
45. Tang JC (1989) Listing, drawing, and gesturing in design: A study of the use of shared workspaces by design teams. Department of Mechanical Engineering, Stanford University, Stanford, California, PhD thesis
46. Vincenti WG (1990) What engineers know and how they know it. The John Hopkins University Press, Baltimore
47. Yen S, Fruchter R, Leifer LJ (1999) Facilitating tacit knowledge capture and reuse in conceptual design activities. In: Proceedings of the 1999 ASME Design Engineering Technical Conferences, Las Vegas
48. Mørup M (1993) Design for Quality. Institute of Engineering Design, TU Denmark, PhD Thesis
49. Olesen J (1992) Concurrent development in manufacturing - based on dispositional mechanisms. Institute for Engineering Design, TU of Denmark, PhD thesis
50. Buur J (1990) Theoretical Approach to Mechatronics Design. Institute for Engineering Design, TU of Denmark, PhD thesis
51. Jørgensen KA (1992) Paradigms for research work. Instituttet for Produktion, AUC Denmark (lecture notes in Danish)
52. Brown DC, Lander SE, Petrie CJ (1996) The application of multi-agent systems to concurrent engineering. In: Editorial Concurrent Engineering: Research and Applications 4(1): 2-5
53. Lander S (1997) Issues in multi-agent design systems. IEEE Expert: Intelligent Systems and their Applications, 12(2):18-26
54. Levitt RE, Jin Y, Dym CL (1991) Knowledge-based support for management of concurrent, multidisciplinary design. AI EDAM 5(2):77-95
55. National Science Foundation (1996) Research opportunities in engineering design. NSF Workshop Final Report, April 1996
56. Rivin EI (1988) Mechanical design of robots. McGraw-Hill Book Company, TX
57. Shakeri C (1998) Discovery of design methodologies for the integration of multi-disciplinary design problems. Mechanical Engineering Dept., WPI, Worcester, MA, PhD thesis
58. Shakeri C, Brown DC (2004) Constructing design methodologies using multi-agent systems. AI EDAM 18(2): 115-135
59. Shakeri C, Brown DC, Noori MN (1998) Discovering methodologies for integrated product design. In: 1998 AI and Manufacturing Workshop: State of the Art and State of Practice, Albuquerque, NM, : pp 169-176
60. Sobolewski M (1996) Multiagent knowledge-based environment for concurrent engineering applications. Concurrent Engineering: Research and Applications 4(1):89-97
61. Wooldridge M (1997) Agent-based software engineering. IEEE Transactions on Software Engineering, 144(1):26-37.
62. Aguirre GJ (1990) Evaluation of technical systems at the design stage. University of Cambridge, Cambridge, UK, PhD thesis
63. Dimarogonas AD (1993) On the axiomatic foundation of design. In: Knight TK and Stauffer LA (eds) Design Theory and Methodology (DTM'93) Albuquerque, New Mexico, ASME
64. French MJ (1992) Design principles applied to structural functions of machine components. J Eng. Des. 3(3):229-241
65. French MJ (1994) An annotated list of design principles. In: Proceedings of the Institution of Mechanical Engineers 208:229-234
66. Hubka V, Eder WE (1988) Theory of technical systems. Springer-Verlag, Berlin
67. Pahl G, Beitz W (1996) Engineering design - A systematic approach. 2nd edn, Springer- Verlag, London
68. Stephenson J (1995) Design for reliability in mechanical systems. PhD thesis, University of Cambridge, Cambridge, UK
69. Suh NP (1990) Principles of design. Oxford University Press, Oxford
70. Taguchi G (1993) Robust technology development. Mechanical Engineering 115(3):60-62
71. Ackroyd S, Hughes JA (1981) Data collection in context. Longman, New York
72. Adams JL (1993) Conceptual blockbusting: a guide to better ideas, 3rd edn. Addison- Wesley
73. Ahmed S (2001) Understanding the use and reuse of experience in engineering design. Engineering Department. University of Cambridge, Cambridge UK, PhD Thesis
74. Ahmed S, Wallace K, Blessing LTM (2003) Understanding the differences between how novice and experienced designers approach design tasks. Research in Engineering Design 14:1-11
75. AIAA (1998) Guide for the verification and validation of computational fluid dynamics simulations. American Institute of Aeronautics and Astronautics AIAA G-077-1998
76. Almefeldt L (2005) Requirements-driven product innovation: industrial needs and supportive methods and tools. Chalmers University, Gothenburg, Sweden, PhD Thesis
77. Altschuller G (1984) Erfinden: Wege zur Lösung technischer Probleme. VEB Verlag, Berlin
78. Anderson B (1996) Work, ethnography and system design. Rank Xerox Research Centre, Technical Report EPC 1996-103
79. Andreasen MM (1980) Machine design methods based on a systematic approach - contribution to a design theory. Department of Machine Design. Lund Institute of Technology, Lund, Sweden, PhD Thesis (in Danish)
80. Antonsson EK (1987) Development and testing of hypotheses in engineering design research. Journal of Mechanisms, Transmissions and Automation in Design 109:153-154
81. Ashby M (2005) How to write a paper. www-mech.eng.cam.ac.uk/mmd/ashby- paper- V6.pdf. Accessed 14 December 2008
82. Beitz W (1979) Anforderungen der Konstruktionspraxis und die CAD-Technologie. Zeitschrift für wirtschaftliche Fertigung 74:459-464
83. Bender B (2004) Erfolgreiche individuelle Vorgehensstrategien in frühen Phasen der Produktentwicklung. University of Technology Berlin, Berlin, Germany, PhD Thesis
84. Bessant JR (1979) Preparing for design studies: ways of watching. Design Studies 1:77-83
85. Bessant JR, McMahon BJ (1979) Participant observation of a major design decision in industry. Design Studies 1:21-26
86. Björk E (2003) A contribution to insider action research - applied on the development of assistive products. Otto-von-Guericke Universität Magdeburg, Germany, PhD thesis
87. Blalock AB (1999) Evaluation research and the performance management movement. Evaluation 5:117-149
88. Blessing L, Wicht A, Meyer-Eschenbach A, Alraheb O (2006) Untersuchung von Pressverbindungen mit gerändelter Welle. Fachgebiet Konstruktionstechnik und Entwicklungsmethodik, TU Berlin, Berlin, Research proposal, unpublished
89. Blessing LTM (1994) A process-based approach to computer-supported engineering design. University of Twente, PhD thesis
90. Blessing LTM (1995) Comparison of design models proposed in prescriptive literature. In: Perrin J (ed.) The role of design in the shaping of technology (Workshop COST A3/A4), Lyon
91. Blessing LTM (1997) A method for identifying scope and assumptions in developing and selecting methods and tools. Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR37
92. Blessing LTM (2002) What is this thing called 'design research'? In: Annals of the 2002 International CIRP Design Seminar. CIRP, Hong Kong
93. Blessing LTM (2003) Future issues in design research. In: Lindemann U (ed.) Human behaviour in design: Individuals, Teams, Tools. Springer Verlag, Heidelberg, pp 298- 303
94. Blessing LTM, Andreasen MM (2005) Teaching engineering design research. In: Clarkson PJ, Huhtala M (eds) Engineering Design - theory and practice. A symposium in honour of Ken Wallace. Engineering Design Centre, University of Cambridge, Cambridge, pp 32-41
95. Blessing LTM, Chakrabarti A (2002) DRM: A design research methodology. In: Les Sciences de la Conception: l'enjeu scientifique du 21e siècle en hommage à Herbert Simon, Ed. J. Perrin, INSA, Lyon, France
96. Blessing LTM, Chakrabarti A, Wallace K (1995) A design research methodology. In: Hubka V (ed.) International Conference on Engineering Design (ICED'95). Heurista, Zürich, Prague, pp 502-507
97. Blessing LTM, Chakrabarti A, Wallace KM (1992) Some issues in engineering design research. In: Cross N (ed.) OU/SERC Design Methods Workshop, The Open University, Milton Keynes
98. Blessing LTM, Chakrabarti A, Wallace KM (1998) An overview of descriptive studies in relation to a general design research methodology. In: Frankenberger E, Badke-Schaub P (eds) Designers: The Key to Successful Product Development. Springer-Verlag, pp 56-70
99. Bligh TP (1990) Personal communiation
100. Boehm BW (1979) Software Engineering: R & D trends and defense needs. MIT Press, Cambridge MA
101. Boehm BW (1988) A spiral model of software development and enhancement. IEEE Compurer 61-72
102. Booch G, Bryan D, Peterson CG (1994) Software engineering with Ada, 3rd edn. Addison- Wesley
103. Bracewell RH, Shea K (2001) CaeDre: A product platform to support creation and evaluation of advanced computer aided engineering tools. In: Culley S, et al. (eds) International Conference on Engineering Design (ICED'01). IMecheE, London, Glasgow, pp 539-546
104. Bracewell RH, Shea K, Langdon P, Blessing LTM, Clarkson PJ (2001) A methodology for computational design tool research. In: Culley S, et al. (eds) 13th International Conference on Engineering Design (ICED'01). IMecheE, London, Glasgow, pp 181- 188
105. Braha D, Maimon OZ (1998) A mathematical theory of design: foundations, algorithms and applications. Kluwer Academic Publishers Norwell, MA, USA
106. Brown D (2008) AI in Design Webliography. http://web.cs.wpi.edu/Research/ aidg/AIinDhotlist. html. Accessed 14 December 2008
107. Buchanan BG, Duda RO (1983) Principles of rule-based expert systems. Advances in Computers 22:163-216
108. Buchanan R (2004) Design as inquiry: the common, future and current ground of design. In: Futureground Design Research Society International conference, Melbourne
109. Bullock A, Stallybrass O, Trombley S (1988) The Fontana dictionary of modern thought. Fontana Press
110. Burke S (1998) Missing values, outliers, robust statistics and non-parametric methods. http://www.lcgceurope.com/lcgceurope/data/ articlestandard/lcgceurope/502001/4509/art icle.pdf. Accessed 13 December 2008
111. Button G, Dourish P (1996) Technomethodology: paradoxes and possibilities. In: Tauber MJ, et al. (eds) Human Factors in Computing Systems, CHI96. ACM, Vancouver, BC, Canada, pp 19-26
112. Cantamessa M (2001) Design research in perspective - a meta-research on ICED'97 and ICED'99. In: Culley S, et al. (eds) International Conference on Engineering Design (ICED'01). IMechE, Glasgow, pp 29-36
113. Carr W, Kemmis S (1981) Becoming critical: education knowledge and action research. Falmer Press, London
114. Catterall M, Maclaran P (1997) Focus group data and qualitative analysis programs: coding the moving picture as well as the snapshots. Social Research Online 2:12
115. Chakrabarti A (2006) Defining and supporting design creativity. In: International Design Conference (Design2006), Dubrovnik, Croatia
116. Chakrabarti A (2008) A post graduate course on DRM - A methodology for design research. In: Chakrabarti A, Subrahmanian E (eds) Indo-US Workshop on Design Engineering 2006. Allied Publishing, New Delhi
117. Chakrabarti, A, Morgenstern, S, and Knaab, H (2004) Identification and application of requirements and their Impact on the design process: a protocol study, Research in Engineering Design, 15:22-39
118. Checkland P (1981) Systems thinking, systems practice. Wiley, Chichester
119. Checkland P (1999) Soft systems methodology: 30-year retrospective. Wiley, Chichester
120. Clausing D (1994) Total quality development: a step-by-step guide to world class concurrent engineering. American Society of Mechanical Engineers
121. Coad P, Yourdon E (1990) Object-oriented analysis. Prentice Hall, Englewood Cliffs, NJ
122. Coffey A, Holbrook B, Atkinson P (1996) Qualitative data analysis: technologies and representations. Social Research Online 1:15
123. Cook TD, Campbell DT (1979) Quasi-experimentation: design and analysis issues for field settings. Houghton Mifflin Company, Boston
124. Cross N (1994) Engineering Design Methods: strategies for product design, 2th edn. John Wiley and Sons Ltd, Chichester
125. Cross N., K. Dorst, N. Roozenburg (eds) (1991) Research in design thinking workshop. Delft, The Netherlands
126. Cuba L (1993) A short Guide to Writing about Social Science, 2nd edn. Harper Collings College Publishers, New York, U.S.A.
127. Culley SJ (1999) Future Issues in Design Research. In: Culley SJ (ed.) Future Issues in Design Research Workshop. EPSRC/DTI, Bath (UK)
128. Dagman A (2005) Increased visual quality through robust split-line design. Chalmers University, Gothenburg, Sweden, PhD Thesis
129. Dasgupta S (1994) Creativity in invention and design: computational and cognitive explorations of technological originality. Cambridge University Press
130. Davis AM (1990) Software requirements: objects, functions and states. Prentice-Hall, Englewood Cliffs NJ
131. Denzin NK, Lincoln YS (eds) (2005) The Sage Handbook of Qualitative Research, 3rd edn. Sage Publications, Thousand Oaks
132. Denzin NK (1978) The research act: a theoretical introduction to sociological methods, 2nd edn. McGraw-Hill, New York
133. Dick B (1997) A beginner's guide to action research. http://www.scu.edu. au/schools/gcm/ ar/arp/actlearn.html. Accessed 13 December 2008
134. Dillman DA, Smyth JD, Christian LM (2008) Internet, mail, and mixed-mode surveys: The tailored design method. John Wiley and Sons
135. Dilnot C (2004) The promise and actuality of design research. In: DRS Futureground, Melbourne
136. Donaldson I (1991) Evaluation of design research demonstator systems. Notes of a joint workshop. CAD Centre, University of Strathclyde, Project Report CONSYN / X / 91-06
137. Duffy AHB (ed.) (1998) The productivity debate. Springer Verlag, London
138. Duffy AHB, Andreasen MM (1995) Enhancing the evolution of design science. In: Hubka V (ed.) Proceedings of the 10th International Conference on Engineering Design (ICED'95). Heurista, Zürich, Prague, pp 29-35
139. Duffy AHB, O'Donnell FJO (1999) A design research approach. In: Mortensen NH, Sigurjonsson J (eds) Critical enthusiasm - contributions to design science. Tapir, Trondheim, N., pp 33-40
140. Dwarakanath S, Blessing LTM, Wallace KM (1995) Descriptive studies: Starting point for research in engineering design. In: International Conference on Advances in Mechanical Engineering (ICAME), Indian Institute of Science, Bangalore, India, December 20-22, pp 341-361
141. Eckersley M (1988) The form of design processes: a protocol analysis study. Design Studies 9:86-94
142. Eckert CM (1997) Intelligent support for knitwear design. Department of Design and Innovation. Open University, Milton Keynes, UK, PhD thesis
143. Eckert CM, Clarkson PJ, Stacey MK (2003) The spiral of applied research: a methodological view on integrated design research. In: Norell M (ed.) International Conference on Engineering Design (ICED'03), Stockholm
144. Eilmus S (2007) Methodische Entwicklung eines Prüfstands zur Sitzkomfortmessung. Faculty of Mechanical Engineering and Transportation Systems. Technische Universität Berlin, Berlin, MSc thesis
145. Erichson B, Plinke W, Weiber R, Backhaus K (2000) Multivariate Analysemethoden. Springer, Heidelberg
146. Ericsson KA, Simon HA (1996) Protocol analysis: verbal reports as data, 2nd edn. The MIT Press, Cambridge MA
147. Eriksson J (2007) High performance decision-making in distributed product development. In: Unpublished Poster for the 2007 Summer School on Engineering Design Research
148. Finger S, Dixon JR (1989a) A review of resaerch in mechanical engineering design. Part II: Representations, analysis and design for the life cycle. Research in Engineering Design 1:121-137
149. Finger S, Dixon JR (1989b) A review of research in mechanical engineering design, Part 1: descriptive, prescriptive and computer based models of design processes. Research in Engineering Design 1:51-67
150. Flanagan T, Jänsch J (2004) Models, methodology and finding focus: dealing with the challenges of PhD research. In: International Design Conference Design 2004, Dubrovnik, Croatia
151. Foraker Design (2005) Online guide to usability resources, Applications: groupware. http://www.usabilityfirst.com/groupware/cscw.txl#introductions. Accessed 14 December 2008
152. Frankenberger E (1997) Arbeitsteilige Produktentwicklung. VDI Fortschrittberichte. Technische Universität Darmstadt, Darmstadt, PhD Thesis
153. Frankenberger E, Badke-Schaub P, Birkhofer H (eds) (1998) Designers - the key to successful product development. Springer Verlag, London
154. Frankfort-Nachmias C, Nachmias D (1996) Reseach methods in the social sciences, 5th edn. St. Martin Press, Inc., London
155. French M (1985) Conceptual design for engineers. The Design Council, London
156. Frey DD, Dym CL (2006) Validation of design methods and theories: lessons from medicine. Research in Engineering Design 17:45-57
157. Fricke G (1993a) Konstruieren als flexibler Problemlöseprozeß: empirische Untersuchung über erfolgreiche Strategien und methodische Vorgehensweisen beim Konstruieren. VDI-Verlag, Düsseldorf
158. Fricke G (1993b) Empirical investigation of successful approaches when dealing with differently precised design problems. In: International Conference on Engineering Design (ICED'93). Heurista, Zürich, The Hague, pp 359-367
159. Fricke G, Pahl G (1991) Zusammenhang zwischen personenbedingtem Vorgehen und Lösungsgüte. In: Hubka V (ed.) International Conference on Engineering Design (ICED '91). Heurista, Zürich, Zürich, pp 331-341
160. Friedrichs J, Luedthe H (1975) Participant observation: theory and practice. Saxon House- Lexington Books, UK
161. Fuggetta A (1993) A classification of CASE technology. IEEE Computer 26:25-38
162. Fulcher AJ, Hills P (1996) Towards a strategic framework for design research. Journal of Engineering Design 7:183-193
163. Galle P (2006) Worldviews for design theory. In: Wondergrounds, Design Research Society International Conference, Lisbon
164. Galle P (ed.) (2002) Design Studies: special issue on the philosphy of design. 23(3)
165. Gero J (1990) Design prototypes: a knowledge representation schema for design. AI Magazine 11:26-36
166. Gero J, Kannengiesser U (2002) The situated function-behaviour-structure framework. In: Gero J (ed.) Artificial Intelligence in Design '02. Kluwer, Dordrecht, pp 89-102
167. Gibbons M, Johnson C (1982) Science, technology and the development of the transistor. In: Barnes B, Edge D (eds) Science in context, Cambridge MA, pp 177-185
168. Glaser BG, Strauss A (1967) The discovery of grounded theory. Aldine, Chicago
169. Grabowski H, Rude S, Grein G (eds) (1998) Universal Design Theory, Proceedings of the Workshop Universal Design Theory, Karlsruhe, Germany. Shaker Verlag, Aachen
170. Gram C, Cockton (eds) (1996) Design principles for interactive software. Chapman and Hall, London
171. Griffiths CPA (1995) On being a scientist - responsible conduct in research, 2nd edn. Committee on Science, Engineering and Public Policy, National Academy of Sciences, National Academy of Engineering, Institute of Medicine, National Academies Press, Washington
172. Grosso WE, Fergerson RW, Musen MA (1999) Knowledge models and axiom languages: The formal underpinnings of Protege. Stanford Medical Informatics, Technical Report
173. Guba EG, Lincoln YS (1989) Fourth generation evaluation. Sage, Newbury Park, CA
174. Guindon R (1990) Designing the design process: exploiting opportunistic thoughts. Human Computer Interaction 5:305-344
175. Hales C (1987) Analysis of the engineering design process in an industrial context. Gant Hill Publications, Hampshire U.K.
176. Hami-Nobari S (2007) WIBER - Methode zur wirkungsorientierten Beschreibung variantenreicher Erzeugnisse. Berlin University of Technology, Berlin, PhD Thesis
177. Hammersley M, Gomm R (1997) Bias in social research. Sociological Research Online 2 http://www.socresonline.org.uk/socresonline/2/1/2.html.
178. Hatchuel A, Weil B (2003) A new approach of innovative design: an introduction to C-K theory. In: Norell M (ed.) International Conference on Engineering Design (ICED'03), Stockholm, Sweden
179. Hatchuel A, Weil B (2009) C-K design theory: an advanced formulation. Research in Engineering Design 19: 181-192
180. Heymann M (2005) Kunst und Wissenschaft in der Technik des 20. Jahrhunderts: zur Geschichte der Konstruktionswissenschaft. Chronos Verlag, Zürich
181. Horváth I (2001) A contemporary survey of scientific research into engineering design. In: Culley S, et al. (eds) International Conference on Engineering Design (ICED'01). ImechE, Glasgow, pp 13-20
182. Horváth I (2004) A treatise on order in engineering design research. Research in Engineering Design 15:155-181
183. Hubka V, Eder E (1988) Theory of technical systems: a total concept theory for engineering design. Springer Verlag, Berlin
184. Hurtienne J, Weber K, Blessing L (2008) Prior experience and intuitive use: image schemas in user centred design. In: Langdon P, et al. (eds) Designing inclusive futures. Springer, London, pp 107-116
185. IEEE (1998) IEEE Std 1012-1998: Standard for software verification and validation. Institute of Electrical and Electronics Engineers
186. ISO (1998) ISO 9241-Ergonomic requirements for office work with visual display terminals (VDTs) - Part II: Guidance on usability. International Organization for Standardization
187. ISO (1999) ISO 13407 Human centred design processes for interactive systems. International Organization for Standardization
188. ISO (2001) ISO 9126-Software engineering - Product quality. International Organization for Standardization
189. Jacobsen I, Christerson M, Jonsson P, Overgaard G (1993) Object oriented software engineering. Addison-Wesley
190. Jones JC (1970) Design methods; seeds of human futures. Wiley, New York
191. Kelle U (1997) Theory building in qualitative research and computer programs for the management of textual data. Social Research Online 2:17
192. King G, Keohane RO, Verba S (1994) Designing social inquiry: scientific inference in qualitative research. Princeton University Press, Princeton NJ
193. Kline PJ, Dollins SB (1989) Designing expert systems. John Wiley and Sons, New York
194. Kuhn TS (1970) The structure of scientific revolutions, 2nd edn. University of Chicago Press, Chicago
195. Langdon PM, Bracewell RH, Blessing LTM, K.M. W, Clarkson PJ (2001) A practical methodology for integrating sofware and empirical techniques in design. In: Culley S, et al. (eds) International Conference on Engineering Design (ICED'01). IMecheE, London, Glasgow, pp 557-564
196. Lee RA, Fielding N (1996) Qualitative data analysis: technologies and representations: A comment on Coffey, Holbrook and Atkinson. Social Research Online 1:7
197. Lenox RS (1985) Educating for the serendipitous discovery. Journal of Chemical Education 62:282
198. López-Mesa B (2004) The use and suitability of design methods in practice: considerations of problem-solving characteristics and the context of design. Luleä University of Technology, Luleä, Sweden, PhD Thesis
199. Lossack R-S (2006) Wissenschaftstheoretische Grundlagen für die rechnerunterstützte Konstruktion. Springer, Berlin Heidelberg
200. Love T (2000) Philosophy of design: a meta-theoretical structure for design theory. Design Studies 21:293-313
201. Love T (2002) Constructing a coherent cross-disciplinary body of theory about designing and designs: some philosophical issues. Design Studies 23:345-361
202. Lowe A, McMahon CA, Shah T, Culley SJ (2001) The application of an automatic document classification system to aid the organisers of ICED2001. In: Culley S, et al. (eds) International Conference on Engineering Design. IMechE, Glasgow, pp 437-444
203. Mahlke S (2008) User experience of interaction with technical systems. Technische Universität Berlin, Berlin, PhD thesis
204. Marsh JR (1997) The capture and utilisation of experience in engineering design. Engineering Department. University of Cambridge, Cambridge, PhD Thesis
205. Miles MB, Huberman AM (1984) Qualitative data analysis: a sourcebook of new methods. Sage, Beverly Hills
206. Möhringer S (2005) Entwicklungsmethodik für mechatronische Systeme. Faculty of Mechanical Engineering. University of Paderborn, Paderborn, Germany, Habilitation
207. Monod J (1969) From biology to ethics. Salk Institute, San Diego
208. Muller MG, Wildman DM, White EA (1993) Taxonomy of PD practices: a brief practitioners guide. Communications of ACM 36:26-28
209. N.N. (1977) Linus Pauling: crusading scientist, transcript of broadcast of NOVA, nr. 417, J. Angier, executive producer. In. WGBH-TV, Boston
210. N.N. (1989) Special issue on rapid prototyping. IEEE Computer
211. N.N. (2006) Quoting and paraphrasing sources. www.wisc.edu/writing/ Handbook/ QuotingSources.html. Accessed 19 December 2008
212. N.N. (2007) What is plagiarism? http://www.lib.berkeley.edu/instruct/ guides/citations.html. Accessed 19 December 2008
213. N.N. (2008) Types of plagiarism. http://www.plagiarism.org/learning- center/types- of- plagiarism.html. Accessed 19 December 2008
214. Nidamarthi S (1999) Understanding and supporting requirement satisfaction in the design process. Department of Engineering, University of Cambridge, Cambridge, PhD thesis
215. Nidamarthi S, Chakrabarti A, Bligh TP (1997) The significance of co-evolving requirements and solutions in the design process. In: International Conference on Engineering Design (ICED'97). Heurista, Zürich, Tampere, pp 227-230
216. Nielsen J (1992) Finding usability problems through heuristic evaluation.
217. Norman DA, Draper SW (1986) User-centred system design. Lawrence Erlbaum, Hills Dale NJ
218. Oliver JE (1991) The incomplete guide to the art of discovery. Columbia University Press, New York
219. Orne MT (1962) On the social psychology of the psychological experiment: With particular reference to demand characteristics and their implications. American Psychologist 17:776-783
220. Pahl G, Beitz W (2007) Engineering design: A systematic approach, 3rd edn. Springer
221. Patton MQ (1987) How to use qualitative methods in evaluation. Sage Publications, London
222. Patton MQ (1990) Qualitative evaluation and research methods, 2nd edn. Sage Publications, Newbury Park CA
223. Patton MQ (2002) Qualitative research and Evaluation methods, 3rd edn. Sage Publications Inc., Thousand Oaks, CA
224. Polson P, Lewis C, Rieman J, Wharton C (1992) Cognitive walkthroughs: a method for theory-based evaluation of interfaces. International Journal of Man-Machine Studies 36:741-773
225. Preiss M (2006) Ein Reifegradmodell für die Optimierung der Produktentwicklung kundenorientierter Zulieferbetriebe. ETH, Zürich, Switzerland, PhD thesis
226. Ramon y Cajal S (1999) Advice for a young investigator. The MIT Press, Cambridge MA
227. Raphael B, Shea K, Smith IFC (1999) A task and software independent CAE course. In: AICIVIL-COMP99: The fifth international conference on the applications of AI to Civil and Structural Engineering, Oxford, UK
228. Reich Y (1994a) Layered models of research methodologies. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 8:263-274
229. Reich Y (1994b) Annotated bibliography on research methodologies. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 8:355-366
230. Reich Y (1995) The study of design research methodology. Journal of Mechanical Design 177:211-214
231. Root-Bernstein RS (1989) Discovering: inventing and solving problems at the frontiers of scientific knowledge. Harvard University Press, Cambridge MA
232. Roozenburg NFM, Eekels J (1995) Product design: Fundamentals and methods. John Wiley & Sons, Chichester
233. Rossi PH, Freeman HE, Lipsey MW (1999) Evaluation, a systematic approach, 6th edn. Sage Publications, Thousand Oaks
234. Royce WW (1970) Managing the development of large software systems: concepts and techniques. In: IEEE WESTCON, Los Angeles, pp 1-9
235. Samuel A, Lewis W (2001) Curiosity-oriented research in engineering design. In: Culley S, et al. (eds) International Conference on Engineering Design (ICED'01). IMechE, Glasgow, pp 37-44
236. Sarkar P (2007) Development of a support for effective concept exploration to enhance creativity of engineering designers. Indian Institute of Science, Bangalore, PhD Thesis
237. Saunders J (2008) Computer Supported Collaborative Work. http://www.johnsaunders.com. Accessed 14 December 2008
238. Schank RC (1990) What is AI, anyway? In: Partridge D, Wilks Y (eds) The foundations of artificial intelligence: a sourcebook. Cambridge University Press, Cambridge, pp 3-13
239. Schregenberger JW (1997) The further development of design methodologies. In: Frankenberger E, et al. (eds) Designers - the key to successful product development. Springer Verlag, London, pp 57-67
240. Schreiber G, Akkermans H, Anjewierden A, de Hoog R (2000) Knowledge engineering and management: the CommonKADS methodology. MIT Press, Cambridge, MA
241. Seepersad CC, Pedersen K, Emblemsväg J, Bailey RR, Allen JK, Mistree F (2006) The Validation Square: How does one verify and validate design methods? In: Chen W, et al. (eds) Decision Making in Engineering Design, . ASME Press, New York, pp 303-314
242. Shah JJ, Finger S, Lu S, Leifer L, C.Cruz-Neira, Wright P, Cagan J, Vandenbrande J (2004) ED2030: strategic plan for engineering design. In: NSF Workshop on Engineering Design in Year 2030 National Science Foundation, USA
243. Shah JJ, Hazelrigg H (1996) Research opportunities in engineering design. In: NSF Strategic Planning Workshop National Science Foundation, USA
244. Shneiderman B (1998) Designing the user interface, 3 edn. Addison-Wesley Publishing Company
245. Simon HA (1981) The sciences of the artificial, 2nd edn. MIT Press, Cambridge MA
246. Smith AJ (1990) The task of the referee. Computer, IEEE 23:65-71
247. Smith MF (1991) Software prototyping: adoption, practice and management. McGraw-Hill, London, New York
248. Smithers T (1998) Towards a knowledge level theory of design process. In: Gero J, Sudweeks F (eds) Artificial Intelligence in Design '98. Kluwer Academic Publishers, pp 3-21
249. Sommerville I (2006) Software Engineering, 8th edn. Pearson Education
250. Srinivasan V, Chakrabarti A (2008a) Design for novelty - a framework? In: Marjanovic D, Storga M, Pavkovic N, Bojcetic N (Eds) International Design Conference (Design 2008), Dubrovnik, Croatia, pp 237-244
251. Srinivasan, V, Chakrabarti, A (2008b) Novelty-SAPPhIRE relationship: an empirical study. In: International Conference on Trends in Product Lifecycle- Modeling, Simulation and Synthesis, Bangalore, India pp 212-220
252. Stacey M, Eckert CM, Earl C, Bucciarelli L, Clarkson P (2002) A comparative programme for design research. In: Commonground Design Research Society International Conference, Stoke on Trent, UK
253. Star SL (1997) Anselm Strauss: an appreciation. Sociological Research Online 2:8
254. Stephenson J (1995) Design for reliability in mechanical systems. Engineering Department. Cambridge University, Cambridge, UK, PhD
255. Strauss A (1970) Discovering new theory from previous theory. In: Shibutani T (ed.) Human nature and collective behaviour: papers in honor of Herbert Blumer. Prentice- Hall, Englewood Cliffs, NJ
256. Suchman L (1987) Plans and situated action. Cambridge University Press, New York
257. Suh NP (1998) Axiomatic Design as a basis for universal design theory. In: Grabowski H, et al. (eds) Universal Design Theory. Shaker, Aachen
258. Takeda H, Tsumaya A, Tomiyama T (1999) Synthesis thought processes in design. In: Kals H, van Houten F (eds) CIRP International Design Seminar. Springer, University of Twente, Enschede, the Netherlands, pp 249-268
259. Tashakkori A, Teddlie C (1998) Mixed methodology: combining qualititve and quantitative approaches. Sage Publications, Thousand Oaks
260. Taylor MM (2008) Cite references. http://library.open.ac.uk/help/howto/ citeref. Accessed 19 December 2008
261. ten Have P (1977) Sociologisch veldonderzoek. Boom Meppel, Amsterdam
262. Thomson GP (1957) The strategy of research. University of Southampton Press, Southampton
263. Tomiyama T, Yoshioka M, Tsumaya A (2002) A knowledge operation model of synthesis. In: Chakrabarti A (ed.) Engineering design synthesis: Understanding, approaches and tools. Springer, London, pp 67-90
264. Trochim WM (2006) The Research Methods Knowledge Base. http://www.socialresearchmethods.net/kb. Accessed May 25 2008
265. Truesdell C (1984) An idiots fugitive essays on science. Springer Verlag, New York
266. Upton N, Yates I (2001) Putting design research to work. In: Culley S, et al. (eds) International Conference on Engineering Design (ICED'01). IMechE, Glasgow
267. VDI (1993) VDI Guideline 2221: Methodik zum Entwickeln und Konstruieren technischer Systeme und Produkte. Verein Deutscher Ingenieure VDI, Düsseldorf
268. Verschuren PJM (1997) Ontwerpgericht onderzoek: een methodologische bezinning. Bedrijfskunde 69:82-89
269. Visser W (1990) Evocation and elaboration of solutions: different types of problem-solving actions. In: Cognitiva'90, Paris, pp 689-696
270. Vitruvius (1960) The ten books of architecture. Dover Publications Inc, New York
271. Vogt WP (1999) Dictionary of statistics and methodology: a non-technical guide for the social sciences, 2nd edn. Sage Publications, Thousand Oaks
272. Vroom R (2001) Zicht op product- en procesontwikkeling. Delft University of Technology, Delft, PhD Thesis
273. Waldron MB, Waldron KJ (1988) A time sequence study of a complex mechanical system design. Design Studies 9:95-106
274. Wallace KM, Blessing LTM (2000) Observations on some German contributions to engineering design. in memory of Professor Wolfgang Beitz. Research in Engineering Design 12:2-7
275. Weber C (2005) CPM/PDD - an extended theoretical approach to modelling products and product development processes. In: Bley H, et al. (eds) 2nd German-Israeli Symposium on advanced in methods and systems for development of products and Processes. Franhofer-IRB-Verlag, TU Berlin / Franhofer-Institut für Produktionsanlagen und Konstruktiontechnik, pp 159-179
276. Weinert S (2001) Evaluation of a programme to improve acquisition of design strategy in engineering design industry. Department of Psychology. University of Dresden, Dresden, MSc Thesis
277. Wester F (1987) Strategieen voor kwalitatief onderzoek. Coutinho, Bussum NL
278. Winston PH (1993) Artificial Intelligence, 2nd edn. Addison-Wesley, Reading MA
279. Wood KL, Greer JL (2001) Function-based synthesis methods in engineering design. In: Antonsson E, Cagan J (eds) Formal Engineering Design Synthesis. Cambridge University Press, Cambridge, pp 170-227
280. Yates I (1998) Yes, Prime Minister, but it is also investment, investment, investment, . In: 14th Lord Nelson of Stafford Lecture. Institute of Electrical Engineers, London
281. Yin RK (1994) Case study research. Sage, London
282. Yoshikawa H (1980) General design theory and a CAD system. In: Sata T, Warman E (eds) IFIP WG 5.2-5.3 Working Conference. North-Holland, Tokyo, pp 35-57
283. Yourdon E (1989) RE-3: re-engineering, restructuring and reverse engineering. American Programmer 2:3-10
284. Yourdon E (1990) Auld Lang Syne. Byte 257-265
285. Zanker W (1999) Situative Anpassung und Neukombination von Entwicklungsmethoden. Technische Universität München, München, PhD Thesis